CERTAIN REPAIRS TO SANITARY, JOINERY, FLOORING, CEILING AND CONNECTED ITEMS IN NFN, NAD, INS VAJRABAHU, NSOD, CNAI, CCDT, LWT, WESTERN FLEET OFFICE, FMU EMC AND OTHER AREA IN DOCKYARD UNDER AGE B/R-II GE (NW) KUNJALI, COLABA, MUMBAI

Amount

Taking down aluminium door shutters of any size and dismantling carefully all members, glass, gauge etc., straightening the members and reassembling the same with and including new screws, new rubber gasket, new aluminium beads & cleats of existing size, refixng the handles & mortice looks in existing postiion with new screws including refixing the door shutters in same opening complete all as specified and directed. Note : Glass/aluminium wire mesh/floor spring/concealed lock is replaced shall be measured and paid separately.

Taking down aluminium door shutters of any size and dismantling carefully all members, glass, gauge etc., straightening the members and reassembling the same with and including new screws, new rubber gasket, new aluminium beads & cleats of existing size, refixng the locks and rollers in existing postiion with new screws including refixing the woindow shutters in same opening complete all as specified and directed. Note : Glass/aluminium wire mesh/ lock is replaced shall be measured and paid separately.

Supply & fixing powder coated aluminium sections for partitions, windows, ventilators and doors including fabrication of frame/shutters and fixing to walls/floors with necessary lugs, cleats etc including all accessories such as glazing clips, handles, tower bolts, rollers rubber beadings for fixing glass panes in frame including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required complete all as specified Note: - (i) Glass panes will be measured & paid separately. (ii) The rate quoted shall be inclusive of neoprene beading, glazing clips, screws, etc. as required but shall not be measured for arriving of weight. (iii) Minimum thickness of powder coating shall be 25 micron. (iv) The rate shall be inclusive of the locking arrangement including complete packing with silicon gel around contacting surface of aluminium work with matching existing area. (v) The size of aluminium sections shall be as per HQ CE(N) MZ TD drawing No TD/2021/01 to 05 and sill to be provided as per HQ CE(N) MZ TD of sill type 'A' and 'B' respectively if directed.

Supply & Fixing concealed star lock powder coated for aluminium window fixed as per manufacturers instructions and directed.

Supply & fixing 15 mm bore GI tubing medium grade with all fittings such as bends, socket, tees, elbows, unions, barrel, nipple, plugs, etc fixed to walls and ceilings with suitable size GI clamps or laid in floors including taking down old GI tubing including fittings complete all as specified.

Supply & fixing 20 mm bore GI tubing medium grade with all fittings such as bends, socket, tees, elbows, unions, barrel, nipple, plugs, etc fixed to walls and ceilings with suitable size GI clamps or laid in floors including taking down old GI tubing including fittings complete all as specified.

Supply & Fixing 160mm bore PVC ( SWR) grade pipes, single socketed in any length with rubber ring joints fixed to walls with dash through fastners and rain water bracket suitable for 110mm bore pipe spacing 1.5m c/c as per CE (Navy) Mumbai TD No TD/2023/01 or laid in floor complete all as specified.

Supply & Fixing 110mm bore PVC ( SWR) grade pipes, single socketed in any length with rubber ring joints fixed to walls with dash through fastners and rain water bracket suitable for 110mm bore pipe spacing 1.5m c/c as per CE (Navy) Mumbai TD No TD/2023/01 or laid in floor complete all as specified.

Supply & Fixing 75mm bore PVC ( SWR) grade pipes, single socketed in any length with rubber ring joints fixed to walls with dash through fastners and rain water bracket suitable for 110mm bore pipe spacing 1.5m c/c as per CE (Navy) Mumbai TD No TD/2023/01 or laid in floor complete all as specified.

Supply & fixing 160 mm bore PVC(SWR) bend fixed with rubber ring joints complete all as specified.

Supply & fixing 110 mm bore PVC(SWR) bend fixed with rubber ring joints complete all as specified.

Supply & fixing 75mm bore PVC(SWR) bend fixed with rubber ring joints complete all as specified.

Resecuring without taking down of chowkats or frames with shutter n.exc 1.5 sqm each complete all as specified.

Resecuring without taking down of chowkats or frames with shutter exc 1.5sqm but n.exc 4 sqm each complete all as specified.

Taking down chowkats or frames with shutter (without taking off from frame) n.exc 1.5 sqm each complete all as specified and as directed

Taking down chowkats or frames with shutter (without taking off from frame) exc 1.5sqm but n.exc 4 sqm each complete all as specified and as directed

Taking down shutters of any description exc 1 Sqm but n.exc 2 sqm each complete all as specified and directed.

Taking down shutters of any description exc 2 sqm each complete all as specified and directed.

Hacking out old broken glass ( any thickness, size, quality or description) from wooden or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

Material & Labour for 4 mm thick plain sheet glass ordinary quality in squares n.exc 0.5 sqm in each pane fixed with rubber beading in aluminium windows/doors complete all as specified and directed.

Material & Labour for 4 mm thick plain sheet glass ordinary quality in squares exc 0.5 sqm in each pane fixed with rubber beading in aluminium windows/doors complete all as specified and directed.

Supply & Fixing Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers

Material & labour for second class hardwood (SAL) plain, solid straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified.

Supply & Fixing factory made, 2nd class hard wood 35 mm thick, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass/gauze sizes of members of shutters as specified in SSR Part-I Section 8 Clause 8.20 (b) complete all as specified.

Supply & Fixing 40mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed .

Supply & Fixing Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing in SSR Part II . Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life.

Supply & Fixing 30 mm thick moulded door shutter wood free consisting of frame made out of MS tubes of 19 gauge thickness and size of 20 mm x 40 mm for stiles as well as top, bottom,lock rail. MS frame shall have a coat of metal primer as approved by manufacturer. The inside panel shall consist of 20 mm thick multichamber hollow PVC section of 1 mm wall thickness, bonded using solvent cement/eynoacrylate adhesive with 5 mm thick moulded PVC sheet of density 600 Kg/Cum manufactured by an ISO - 9001-2015 certified company with 2, 4, 6 raised panel design in plain/prelam colours after routing the moulded design on one side of the inside panel 5mm plain /prelam PVC sheet to be pasted using solvent cement /cynoacrylate adhesive on other side of the hollow PVC section. All the four edge of the panel to be sealed with lipping of 10 mm thick & 20 mm wide PVC sheet baton (made by sticking 2 Nos foam PVC sheets of 5 mm thickness using PVC solvent cement adhesive. Door edge lipping to be painted with PVC ink of matching colour of plain/prelam moulded PVC sheet of door 20 mm thick (5 mm x 4 Nos ) thick PVC sheet to be given for lock provision at lock height . Door to be fixed with frame with 3 Nos stainless steel butt hinges heavy duty of size 100 mm x 25 mm x 2 mm and 50 mm long steel screws drilled suitable to pass through both the walls of the MS tube other hardwares should be fixed with 20 mm x 8 mm size steel screws etc complete as per direction of Engineer-in-Charge, manufacturer's specification and drawing.

Supply & Fixing in repairs Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), with and including P or S Trap, PVC solid type seat cover complete all as specified.

Supply & Fixing in repairs white vitreous china squatting pan, 'orissa' pattern, water closet of size 580mm x 440mm with integral foot rest, P or S trap and provision of lime concrete bedding complete all as specified and directed.

Supply & Fixing in repair health faucet ABS body ( Jet) 1 m long PVC tube with wall hook chromium plated fitted to stopcock 15 mm bore complete all as specified and directed by Engr-in-Charge.

Supply & Fixing in repairs 10 litre capacity PVC valveless syphonic action type flushing cistern low level white with inlet, ball valve, float and handle inlcuidng CI brackets complete all as specified and directed.

Supply & fixing in repairs vitreous china wash hand basin white of size 550mm x 400mm flat back including cutting for and pinning in ends of brackets including CI brackets, 32 mm dia brass CP waste coupling and fitted to wash basin complete all as specified.

Supply & Fixing in repairs 15 mm bore brass chromium plated fancy type bib tap complete all as specified.

Supply & Fixing in repairs 15mm size Stop Valves cast copper alloy fancy type chromium plated screwed down high pressure with crutch or butterfly handle handle screwed both ends complete all as specified .

Supply & Fixing in repairs 15mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed

Supply & fixing in repairs 15 mm bore pillar taps fancy type, cast copper alloy, with capstan heads chromium plated screwed down high pressure with or without lettered `Hot' or `Cold' with long screwed shanks and fly nuts screwed for iron pipe or brass ferrule complete all as specified.

Supply & Fixing Single Piece vitreous china WC with UF soft close seat cover, Hinges, Fixing Accessories, Accessories Set and Cistern fittings, Size: 370x695x795 mm, S trap-300mm including connecting piece and making all connections complete all as specified and directed by Engr-in-Charge .

Supply & Fixing in repairs Rimless, Blind Installation Wall Hung WC vitreous china with UF soft close slim seat cover, Hinges, Accessories Set, Size : 370x490x365 mm S trap-300mm including connecting piece and making all connections complete all as specified and directed by Engr-in-Charge .

Supply & Fixing in repairs single piece slim concealed cistern vitreous china with wall mounting frame and instalation kit and S-type drain pipe connection set for wall hung WC including accessories set and making all connections complete all as specified and directed by Engr-in-Charge .

Supply & Fixing in repairs stainless steel towel ring square with round flange of size 210mm x 210mm complete all as specified and as directed by Engr-in-Charge

Supply & fixing in repairs 20 mm dia brass chromium plated 'D' type towel rail 60 cm long fancy type including necessary brackets and fixed to wall with CP brass screws complete all as specified.

Supply & Fix in repair toilet paper holder stainless steel of size120mm x 100mm including paper chrome finished (with plating of Nickel-10 micron, chromium-0.3 micron and salt spray 200hrs + validated adhesion pass ) fixed with chromium plated brass screw complete all as specified .

Supply & Fixing in repairs health faucet ABS Body with 8 mm dia 1 mtr Spirochrome flex flexible tube and wall hook complete all as specified and as directed by Engr-in-Charge

Supply & Fixing in repairs 15 mm bore Pillar cock with lift type operating knob and base flange chrome finished (with plating of Nickel-10 micron, chromium-0.3 micron and salt spray 200hrs + validated adhesion pass ) complete all as specified .

Supply & Fixing in repairs 15 mm bore CP bib cock Bib Cock (Straight Line Model) With Wall Flange chrome finished (with plating of Nickel-10 micron, chromium-0.3 micron and salt spray 200hrs + validated adhesion pass ) complete all as specified and directed by Engr-in-Charge.

Supply & Fixing in repairs 15 mm bore angular stop cock with wall flange chrome finished (with plating of Nickel-10 micron, chromium-0.3 micron and salt spray 200hrs + validated adhesion pass ) complete all as specified and directed by Engr-in-Charge.

Supply & Fixing in repair vitreous china urinal pot with sensor of Size 370mm x 390mm x 610mm Star white (Senso Art) including making all connections complete all as specified and directed.

Supply & Fixing in repair for Battery operated urinal sensor Flushing complete all as specified and directed by Engr-in-Charge

Supply & Fixing overhead shower of 100 mm round shape single flow (ABS Body chromium plated with gray face plate) with rubit cleaning system complete all as specified and as directed

Supply & Fixing Corner glass shelf with brackets conical shape complete all as specified and as directed

Supply & Fixing 600 mm size glass self assembly fancy type with frame ABS chrome finished (with plating of Nickel-10 micron, chromium-0.3 micron and salt spray 200hrs + validated adhesion pass ) fixed with chromium plated brass brackets and screw complete all as specified and as directed by Engr-in-Charge.

Supply & Fixing in repairs 32mm Waste coupling of PTMT (half or full threaded) (Minimum weight 45gms) complete all as specified .

Supply & Fixing in repairs PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

Supply & Fixing PVC waste Flexible pipe 32mm dia 800mm long with socket sutable for WHB/Sink / urinal complete all as specified and as directed.

Supply & Fixing in repair cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B1, diameter of outlet 75mm bore complete all as specified and directed by Engr-in-Charge .

Supply & fixing in repairs vitreous china bowl type urinal flat back, size of 465 x 355 x 265 mm white (minimum) with grating and union for discharge pipe (excluding flushing Cistern, flush pipe and waste pipe) including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plugs with and including 60mm long brass screws, pointing around urinal backing cement including connections complete all as specified.

Supply & Fixing in repairs vitreous china urinal, half stall type complete including providing and fixing plugs bedding urinal against wall in cement mortar 1:2 securing urinals to plugs with and including 60 mm brass screws, pointing around urinal back in cement , fixing with automatic flushing system with brackets, flush pipes, inlet ,outlet etc complete all as specified and directed

Supply & fixing in repairs viterous china urinal partition white of size 310 x 700mm urinal partions slabs, terminating about 40cm above floor, complete all as specified and directed.

Supply & Fixing in repairs 15mm bore Brass CP mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and as directed by Engr-in-Charge.

Supply & Fixing in repairs two way CP bib cock 15 mm bore with wall flange complete all as specified .

Material & Labour for 75mm bore cast iron soil, waste and vent spun pipes in any length with or without ears with cement joints laid in trenches complete all as specified

Material & Labour for 100mm bore cast iron soil, waste and vent spun pipes in any length with or without ears with cement joints laid in trenches complete all as specified

Taking down cement plaster of any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc and removing debris outside MD land. Note: The place of disposal shall be find out by the contractor.

Material & labour for rendering 15mm thick on fair faces of brick work or concrete surfaces of wall in CM (1:6) and finished even and smooth with and including 1 mm thick neeru complete all as specified.

Material & labour for rendering 5 mm thick on fair faces of concrete surfaces in ceiling in CM (1:3) and finished even and smooth without using extra cement complete all as specified.

Material & labour for rendering 15 mm thick on fair faces of brickwork or concrete surfaces of wall in CM (1:4) mixed with integral water proofing compound @ 3% by weight of cement and finished even and fair complete all as specified. Note- Water proofing compound will be measured and paid for separately.

Material & labour for complete removal of existing treatment including washing, rubbing down and stopping of painted surfaces of wall, soffits, facia roof and applying two coats of weather proof acrylic exterior paint (100% acrylic) over one coat of self primer including necesssary scaffolding and safety arrangement for high rise Blds complete all as specified and as directed by Engr-in-Charge.

Material & labour for complete removal of existing treatment including washing, rubbing down and stopping of distempered and painted ceiling surfaces, filling holes and cracks with filling putty on wall and applying one coat of wall care putty not less than 2mm thickness and making the surface even and smooth using emery paper and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified..

Material & labour for preparation of new plastered surfaces of wall, soffits, facia roof and applying two coats of weather proof acrylic exterior paint (100% acrylic) over one coat of self primer including necesssary scaffolding and safety arrangement for high rise Blds complete all as specified and as directed by Engr-in-Charge.

Material & labour for teatment of old walls and applying one coat of acrylic (antifungal) exterior grade paint of over one coat of primer on wall/roof including preparation of newly plaster surface and necessary scaffolding complete all as specified and directed.

Material & labour for complete removal of existing treatment including washing, rubbing down and stopping of distempered and painted wall surfaces, filling holes and cracks with filling putty on wall and applying one coat of wall care putty not less than 2mm thickness and making the surface even and smooth using emery paper and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified..

Material & labour for preparing new plastered surfaces of wall, applying one coat of wall care putty not less than 2mm thickness and making the surface even and smooth using emery paper and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified.

Material & Labour for preparing old treated wooden surfaces and applying one coat of varnish over a coat of woodfiller transparant complete all as specified .

Supply & fixing in repairs stainless steel sink with draining board, made out of 1.00 mm thick sheet for kitchen with plug, washers, waste pipe, CI Cantilever brackets, connecting union to pipe, overall size 915 mm x 460 mm and bowl size 410 mm x 330 mm x 160 mm.

Supply & fixing in repairs vitreous china wash hand basin white of size 630mm x 450mm flat back including cutting for and pinning in ends of brackets including CI brackets, 32 mm dia brass CP waste coupling and fitted to wash basin complete all as specified.

Supply & fixing in repair under counter wash hand basin vitreous china of size 605mm x 430mm x 200mm oval shape meticulously crafted from high quality materials with seamless finish white fixing with fastner/ bracket including 32mm dia brass CP waste coupling,15mm dia PVC connection with nuts and 32mm dia PVC waste pipe 90cm long and making all connections complete all as specified and as directed Engr-in-Charge.

Supply & fixing in repairs vitreous china Table Top Basin, Size: 640x425x155 mm oval type fixed on granite top including 32mm dia brass CP waste coupling,15mm dia PVC connection with nuts and 32mm dia PVC waste pipe 90cm long and making all connections complete all as specified and as directed Engr-in-Charge.

Supply & fixing in repairs double action floor spring hydraulically regulated made up of minium 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed all as per manufacturer's instruction.

Supply & Fixing in repairs brass CP shower rose 125mm size complete all as specified and directed.

Supply & Fixing in repairs for aluminium anodised Deco grill 7.5 mm size DG-102, fixed with F/H frames, 1.5mm thick, bar size 6.2mm and 7.5mm thick in required sizes complete all as specified and as directed by Engr-in-Charge.

Supply & Fixing extruded aluminium alloy handles fabricated type anodized 150 mm size ISI marked complete all as specified .

Supply & Fixing in repair extruded Brass handles fabricated type bright finished 125 mm size complete all as specified .

Supply & Fixing in repairs extruded Brass handles fabricated type bright finished 150 mm size complete all as specified .

Supply & fixing MS work as in holdfast and similar articles conforming to grade Fe 410-0 and Fe 310-0.

Supply & Fixing in repairs aluminium (extruded section) body door closer hydraulically regulated, designation No.2, universal type, suitable for door shutter of 701 to 850 mm in width & of weight between 36 to 60 kg ISI marked complete all as specified and directed.

Supply & Fixing in repairs 100mm size butt hinges extruded aluminium alloy with galvanized mild steel hinge pin anodised and fixed type C-21 complete all as specified.

Supply & Fixing in repairs 75mm size butt hinges extruded aluminium alloy with galvanized mild steel hinge pin anodised and fixed type C-21 complete all as specified.

Supply & Fixing 75 mm Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, type B-11 complete all as specified.

Supply & Fixing 100 mm Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, type B-11 complete all as specified.

Supply & Fixing in repair 200mm long aluminium anodized barrel tower bolts of extruded sections ISI marked complete all as specified and directed.

Supply & Fixing in repair 150mm long aluminium anodized barrel tower bolts of extruded sections as fixed in repairs complete all as specified and directed.

Supply & Fixing in repairs 300mm long aluminium alloy, anodized sliding door bolts with hasp & staple (bolt type) and fixing clips of sheet cost of extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy ISI marked complete all as specified and directed.

Supply & Fixing in repair 300 mm long Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled of drawn brass bolts complete all as specified and directed.

Supply & Fixing in repairs 200mm long brass barrel tower bolts of extruded sections complete all as specified and directed.

Supply & Fixing in repairs 150 mm long brass barrel tower bolts of extruded sections complete all as specified and directed.

Supply & Fixing in repairs 140mm long floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor ISI marked complete all as specified and as directed

Supply & Fixing in repair for 140mm long floor door stopper of brass body and tongue, anodised with hard drawn steel spring fixed in floor complete all as specified and as directed

Supply & Fixing in repairs aluminium alloy wire cloth, 0.45mm dia of wire and average width of aperture 1.40mm and fixed with aluminium staples complete all as specified and as directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the primesed completed all as specifed and directed Note: The place of disposal shall be find out by the contractor.

Material & Labour for 10mm thick double charged vitrified ceramic tiles, premium quality of approved colour (square/rectangular) polished, area of each tiles not exceeding 0.36sqm (600x600mm), in floor laid over and including 20mm thick screed bed or bedding layer in cement mortar ( (1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified.

Material & Labour 10mm thick double charged vitrified ceramic tiles, premium quality of approved colour (square/rectangular) polished, area of each tiles not exceeding 0.36sqm (600x600mm), as in vertical surfaces such as skirting/dado etc., laid over and including 10mm thick backing coat in CM (1:3), set and jointed in neat cement paste and pointed in white or coloured cement to match the shade of tile complete all as specified.

Material & Labour for coloured glazed ceramic tiles 450mm x 300mm x 7mm thick but laid on vertical surfaces such as skirting/dado laid over and including 10mm thick backing coat in CM (1:3), set and jointed in neat cement paste and pointed in white or coloured cement to match the shade of tile complete all as specified.

Material & Labour for Non skid coloured ceramic tiles 7 to 8 mm thick (square/Rectanglar) area of each tiles exc 0.11 Sqm but n exc 0.18 Sqm laid in floor over and including 20mm thick screed bed or bedding layer in CM (1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified.

Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar including removal of rubbish out side MD land. Note: The place of disposal shall be find out by the contractor.

Material & Labour for 20-25mm thick, machine cut, Kota stone slab, as in floors, steps, landing etc. laid over and including 20mm thick screed bed or bedding layer in CM (1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including rubbing, cutting and polishing as specified in SSR Part I complete all as specified.

M &L for machine cut kota stone slab 18 to 20 mm thick as in vertical surfaces such as skirting/dado laid over and including 15mm thick backing coat in CM (1:4), set and jointed in neat cement paste and pointed in white or coloured cement to match the shade of tile including rubbing, cutting and polishing as specified in SSR Part I complete all as specified.

Hard wear stone (of any type) granite stone slab 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types and including 15mm thick screed bed in CM 1:4 complete all as specified.

Material & labour for Hard wear stone 20mm thick (of any type) granite stone slab machine cut in skirting/dado laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing of type and including 10 mm thick backing coat in CM 1:3 complete all as specified.

Material & labour for 18mm thick italian marble slab machine cut, laid in floor over and including 15mm thick screed bed in cement mortar 1:4, bedded and jointed with white cement slurry and pointed with white cement mixed with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified.

Material & labour for 18mm thick italian marble slab machine cut, laid in skirting/dado laid over and including 10 mm thick backing coat in cement mortar 1:3, set and jointed with white cement paste and pointed with white cement mixed with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified.

Material & labour for machine pressed precast concrete inter locking paver block any shape and size with grey cement and pigment conforming to IS-15658-2006 of 60mm thickness M-35 Grade, glossy finished of approved colour laid to line and slope over and including 25 mm thick fine sand cushion to a line and slope etc and joined complete including spreading screened river sand over surface for filling the joints and gently rolled with vibrator complete all as specified .

Material & labour for machine pressed precast concrete inter locking paver block any shape and size with grey cement and pigment conforming to IS-15658-2006 of 80mm thickness M-40 Grade, glossy finished of approved colour laid to line and slope over and including 25 mm thick fine sand cushion to a line and slope etc and joined complete including spreading screened river sand over surface for filling the joints and gently rolled with vibrator complete all as specified .

Material and Labour for machine pressed cheqered cement coloured tiles of size 250mm x 250mm x 20mm thick mixed with grey cement and pigment laid in floor over and including 15mm thick screed bed in CM 1:4 set and jointed and pointed in neat cement slurry in floors complete all as specified and directed by Engineer -in-Charge.

Supply & Fixing in repairs Wall paper of fibrious material, nonwoven Vinyl free, making them fixed to wall with dry strips or with approved adhesive. Deign & pattern as approved by GE.

Supply & Fixing second class Hard wood (Sal) Plain fillets exc 6 sqcm and not exc 13 sqcm square, rectangular or triangular in section, clean sawn, secured with nails or brads complete all as specified .

Supply & Fixing in repair acoustical Wall panelling with square edge made of fiber glass substrate 20 to 25 mm thick and wrapped on the front side with an acoustical transparent and fire resistant fabric of approved colour per manufacturers instructions and of size 2100 x 600 or 600 x 600mm providing a minimum sound absorption level of 0.50 NRC to be affixed to wall using wall panel impalers (including glass wool as per coverage of soundproof). Panel to be fixed using self tapping screw. Silica based construction adhesive to be dabbed on the projecting elements (spikes) of the impalers complete as per manufacturers instructions and as directed.

Supply & Fixing in repair Wood wool building slabs 25 mm thick, light weight, type 1, fixed with nails to timber framework in wall complete all as specified and directed by Engineer-in- Charge.

Supply & Fixing in repairs Roller venetion blinds made out of standard cloth of approved texture with necessary accessories complete all as specified.

Supply & Fixing in repairs door lock 7/8 mm inch mortice handle pair in black silver finish with legend 65 Brass dead bolt double action 6 Lever lock complete all as specified and directed by Engr-in-Charge.

Material & Labour for complete removal of existing treatment on steel surfaces and applying a coat epoxy putty/Metal putty not less than 2mm thick and two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed by Engr-in-Charge.

Supply & Fixing Prelaminated particle board, 19 mm thick exterior grade, prelaminated both side with decorative choice lamination , fixed with screws to timber/Aluminium frame work complete all as specified and directed.

Supply & Fixing Prelaminated particle board, 9 mm thick exterior grade, prelaminated both side with decorative choice lamination , fixed with screws to timber/Aluminium frame work complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge or thickness including Nainital or similar pattern roof coverings all as specified and directed.

Supply & Fixing pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, chajjas, fixed with self tapping screws complete all as specified.

Supply & Fixing pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, chajjas, valley gutter, ridge and fixed with crumple joint etc fixed with self tapping screws complete all as specified.

Demolition of brick work or stone/boulder masonry, built in cement mortar, including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stone work & precast concrete articles including copings etc.and removing debris outside MD land complete all as specified. Note: The place of disposal shall be find out by the contractor.

Material & labour for brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified.

Material & labour for brick work with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick wall in cm (1:4) complete all as specified.

Material & labour for rendering 15 mm thick on fair faces of brickwork or concrete surfaces in CM (1:4) mixed with WPC @ 3% by weight of cement and finished even and fair complete all as specified. Note : WPC will be measured and paid separately.

Supply only Integral water proofing compound .

Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and directed.

Material & Labour for rolled mild steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe 410 -W (Gde E- 250) quality A complete all as specified.

Supply & fixing mild steel plates ( plain or chequered ) channels, square cut or notched ( ordinary and counter sunk ) forming holes, without any attachment including all necessory drilling, bolting,riveting or welding conforming to FE 410-W, (Gde- E-250) quality-A complete all as specified.

Supply & fixing rolled mild steel in stairs (framed) including stringers, treades, landing, balusters, hand rails etc including cleats, brackets etc including all necessory drilling, bolting,riveting or welding conforming to Fe-290 (Gde E-165) complete all as specified.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets.

Material & Labour for POP false ceiling using 600X900x12 mm thick plaster of paris with gypsum binder sheet decorative type and necessary provision for concealed type light fittings, fixed on 22 gauge GI channel grid work, main joist of size 50x25 mm spaced at 750 mm centre, secondary joist of size 75X20 mm fixed to main joists spaced at 900mm, suspended to roof members using 25x25x2 mm GI angles and fasteners @ 1.2 mtr c/c complete all as specified and directed by Engineer-in-Charge.

Supply & fixing aluminium anodized snap grid of size 605 x 605 mm with aluminium anodized angle 20mm x 20mm x 1.2mm fixed along the wall and main and cross tees of size 36.5mm x 23.5mm x 1.5mm and 23.5mm x 23.5mm x 1.5mm respectively with ceiling cleats / angle brackets of size 15mm x 15mm x 1.5mm including suspended GI wire hangers 6mm dia.upto 1200mm length with adjusting level and fixed to roof slabs by means of ceiling cleats made out of GI flat 40mm x 3mm x 60mm long and expansion hold fasteners 12.5mm dia. 40mm long @ 20cm c/c complete all as specified and directed . Note- New ceiling board will be measured & paid separately

Supply & fixing 4mm thick designed non asbestos fibre cement building boards fixed or laid/inserted in aluminium grid false ceiling complete all as specified.

VIPUL CONSTRUCTION COMPANY (BID ID -3117577)

SR Construction (BID ID -3114679)

SHREE JAGDISH FURNITURE CO. (BID ID -3113936)

M/s. MAYUR ENTERPRISES (BID ID -3121504)

Pragathi Infrastructure Co. (BID ID -3120495)

Nilesh Construction (BID ID -3114378)

SHRI SAI ENTERPRISES (BID ID -3115077)