Supply of Furniture in Economic and Statistics Department at Yojana Bhawan, Jaipur

Amount

Supply of Sofa Settee 2 seater. The frame of the Sofa shall be made of teak wood members round turned front legs made out of size 3"x3" with grooves and hard carving design with curved shape on the upper portion to blend with U shape back (made from Hardwood) and the rear legs to be is made out of 21/2"21/2" teak wood with grooves and curved shape with horizontal supporting members made out of size 4"x11/4". The overall size of the Sofa will have 100mm thick foam Cushions (32 D) in seat (Fixed over flat Zig Zag spring) and 50mm thick foam cushion in back and 50mm thick foam on arm rests covered with tapestry cloth costing upto Rs. 500/- per meter. The Sofa will be melamine polished in Walnut shade complete in all respect as per design and sample approved by Engineer-in-charge and client department.

Supply of Center Table 12mm thick clear glass top, overall size 4'x2'x18". The glass will be set in wooden frame with oriental style moulding on the frame. The legs will be carved out of teak wood members of out of size 21/2"x21/2" with horizontal members made out of size 3"x1" complete in all respect as per design and sample approved by Engineer-in-charge and client department.

Supply of Corner Table 12mm thick clear glass top, overall size 2'x2'x1'6". The glass will be set in wooden frame with oriental style moulding on the frame. The legs will be carved out of teak wood members of out of size 21/2"x21/2" with horizontal members made out of size 3"x1" complete in all respect as per design and sample approved by Engineer-in-charge and client department.

Supply of Console Unit size 1750x750x450mm as per following specifications. The structure to be made out with 18mm thick particle board with 2.00mm thick PVC edge banding of matching colour. There should be a 2 skirting provided in the bottom area. The top of the unit to be made of 25mm thick particle board duly post formed should have half round shape on the front edge and rest of the sides edge banded with 2.00mm thick PVC edge banding of matching colour. The unit to be duly covered with 4 Nos. of shutters & 4 Nos. drawers made out with 18mm particle board with post formed finish and quarter round edges fitted with auto hinges, handles, two lock and all other hardware/accessories as per design and sample approved by Engineer-in-charge and client department

Supply of Executive Table with Side Credenza size 1800x900x750mm Side Credenza size 900x450x625mm as per following specifications. Main Table & Top surface - The main table of size 1800x900x750mm with the top surface made out of 25mm thick particle board with half round/duck nose shape post forming on front and the rear side and the rest of the sides edge banded with 1.5mm thick matching colour PVC edge banding and balancing laminate of matching colour on the reverse side. Side Credenza - The side Credenza of size 900x450x625mm as per approved drawing and sample top surface made out of 25mm thick particle board post formed and lalminated with balancing laminate on reverse side and 1.5mm thick matching colour edge banding on the other two sides.

Drawer Unit - The drawer unit of size 725x450x450mm (HxWxD) made out of 18mm thick pre laminated board having three number of drawer units, two top units of 6" depth each and the bottom drawer of 15" depth. The front shutters matching with top surface in quarter round post formed shutters and mounted on steel telescopic channels including necessary hardware, handles, locks etc. Accessories - One Nos. of Computer Keyboard tray fixed on wheel channels as per drawings. The entire unit is complete in all respects and made as per design and as directed by Engineer-in-charge

Supply of Executive Table with Pedestal and size unit. Table size 2100x900x750mm (LxWxH) Side unit size 900x450x750 (LxWxH) as per following specifications Table Top - The Table top size of 2100x900mm should made out of 25mm thick particle baord post formed in half round shape on the front and rear side and the rest flat edge duly sealed with PVC edge banded 1.5mm thick of matching colour. Legs : The top to be supported by pedestal unit on one side and an 18mm thick four side edge banding leg on the other side. The leg to be FSEB on front and rear side and the rest of the sides should be edge banded with 1.5mm thick PVC edge banding

Side Unit - The structure to be made out with 18mm thick particle board with 1.5mm thick PVC edge banding of matching colour. There should be a 2 skirting provided in the bottom area. The top of the unit to be made of 25mm thick particle board duly post formed should have half round shape on the front edge and rest of the sides edge banded with 1.5mm thick PVC edge banding of matching colour. The unit to be duly covered with 2 Nos. of shutters & 2 Nos. drawers made out with 18mm particle board with post formed finish and quarter round edges fitted with auto hinges handles, one lock and all other hardware/ accessories as per design and direction of Engineer-in-charge.

Supply and fixing Modular work station with partition 60mm thick aluminium top 25mm thick particle board with post forming three drawer pedestal unit one KBT or one CPU trolley. Providing work station as per approved drawing and specifications: Modular Work Station (60mm thick) Face to Face seat size 1200x600x1200mm (LxWxH)

Aluminium partition - There would be partition panels of overall thickness of 60mm +0.5mm of minimum blow sizes fixed in a cross sectional fashion with the help of a right angle/straight connectors of suitable size as per requirement and drawing. The panel would be made with a combination of alumnium sections of overall thickness of 60mm and MDF board sandwich panels of an over thickness of 57/29mm +1mm. The lower section of the partition panel will be of height 750mm up to the worktop and it will be covered with laminate of matching colour on both sides of the panel. The partition portion just above the worktop of height 450mm will be provided with a matching Mica laminated board on both size. The partition panel will have a cable raceway management system in the bottom of an overall size of 1200mmx60mm. The inner side having a cable management system which provides a usable area of 90mmx57/29mm. The cable management system is provided with a bottom cable raceway cover of 100mm width for easy laying of cables. The coer is having half round push fit arrangement for easy opening and compact fixing of cable raceway. Each aluminium partition section will be duly powder coated with matching colour of minimum 40-60 microns thickness and ist should be able to withstand minimum 1000 Hrs. of salt spray test/impact resistance of 150 Kgcm.

Work Top - The work top will be made out of 25mm thick particle board post formed with matching colour laminate with half round post forming on the rear end and 1.5mm thick PVC edge banding on both sides. The work top will be joined with proper joints and dowels. Pedestal Unit - The drawer unit of size 725x380x450mm (HxWxD) made out of 18mm thick laminated board having three number of drawers the top unit of 6" height each and the bottom drawer of 15" eight. The front shutters matching with top surface in quarter round post formed shutters and mounted on sliding channels including necessary hardwares, handle, locks etc. Accessories - Provision with each seat one keyboard try, CPU Trolley (Metallic) Centre Partition - Centre Partition to be made out with 60mm thick aluminium partition The entire unit is complete in all respects and made as per design and as directed by Engineer-in-charge

Supply and arranging Godrej make Leoma High Back Chair. The cushioned seat assembly shall consists of insert moulded polyurethane foam upholster with foam laminated mesh fabric the insert moulded foam is assembled over a load bearing plastic seat cover. The back shall made up of twon piece injection moulded frame. The Inner frame shall be upholstered with mesh fabric and mounted on the main assembly. Size of back shall be (w) 48.5 cm, (H) - 62.0 Cm and size of seat shall be (W) 52.5 cm x (D) 51.0 cm arm set shall be injection moulded with height adjustable upto 4.5 +/- 0.5 cm in 3 steps and with adjustable up to 20mm. The neck rest assembly with form laminated mesh fabric. The neck rest assembly in mounted on the top of back. The chair shall be provided with pneumatic height adjustment which shall have stork of 9.0 +/- 0.3 cm complete in all respect as per design and approved by Engineer-in-charge.

Supply of Executive High Back Chair. The cushioned seat assembly shall consists of insert moulded polyurethane foam upholsted with foam laminated mesh fabric the insert moulded foam is assembled over a load bearing plastic seat cover. The back shall made up of two piece injection moulded frame. The inner frame shall be upholstered with mesh fabric and mounted on the main assembly. size of back shall be (W) 48.5cm (H) 62.0 cm and size of seat shall be (W) 52.5cm x (D) 51.0 cm arm set shall be injection moulded with height adjustable upto 4.5 +/- 0.5 cm in 3 steps and with adjustable up to 20mm. The neck rest assembly shall made up of polyurethane foam upholstered with form laminated mesh fabric. The neck rest assembly in mounted on the top of back. The Chair shall be provided with pneumatic height adjustment which shall have stork of 9.0 +/- 0.3 cm complete in all respect as per design and approved by Engineer-in-charge.

Supply of Peacock type knockdown wooden office with arm computer chair. The wooden are moulded venier, lumber in natural finish. The seat and back made with banyan foam superior quality upholsted with leatherite finish. The back height 83 cm width 54 cm depth 56 cm, seat height 45 cm. The seat and back having 1" thick high density U foam (40 density) complete as per approved sample by Engineer-in-charge and client department.

Supply of glass top on main tables, right side unit, left side unit, and back side unit made out of with 12mm thick float clear glass provided with all edge should be polished as per direction of Engineer-in-charge

Supply of Executive Table with Side Unit. Table size 1500x750x750mm Side unit size 900x450x750mm as per following specifications Table Top - The Top would be made out of 25mm thick particle board post formed in half round shape on the front and rear side and the rest flat edge duly sealed with PVC edge banded 1.5mm thick of matching colour. Front Cover : The front cover of the table is made of 18mm thi k particle board FSEB finish matching with the colour of the table top. Legs : The top is supported by two leg both side would be made out with 18mm thick particle board wqith 1.5mm thi k PVC edge banding finish.

Side Unit - The structure to be made out with 18mm thick particle board with 1.5mm thick PVC edge banding of matching colour. There should be a 2 skirting provided in the bottom area. The top of the unit to be made of 25mm thick particle board duly post formed should have half round shape on the front edge and rest of the sides edge banded with 1.5mm thick PVC edge banding of matching colour. The unit to be duly covered with 2 Nos. of shutters & 2 Nos. drawers made out with 18mm particle board with post formed finish and quarter round edges fitted with auto hinges handles, one lock and all other hardware/ accessories as per design and direction of Engineer-in-charge.

Supply of Executive Medium Back Revolving Chair of Godrej, Wipro, Featherlite, Harmony, Durian Elegant, Intex or equivalent good company make having following specifications Seat/back assembly. The Seat/back are made up of 12mm thick hot pressed plywood, upholstered with fabric and moulded polyurethane foam. The back foam is designed with contoured lumber support for extra comfort. Back size 520mmx580mm Seat size 460mmx470mm Overall height 1080mmx1180mm Polyurethane foam : The polyurethane foam is moulded with density = 45+/- 2 Kg/m3. Upholstery : Fabric/Leatherit, Arm rests : The one piece of armrest in "D" shape made up of Polypropylene.

Supply of Sofa Set 1 seater. The frame of the Sofa shall be made of teak wood members round turned front legs made out of size 3"x3" with grooves and hard carving design with curved shape on the upper portion to blend with U shape back (made from Hardwood) and the rear legs to be is made out of 21/2"21/2" teak wood with grooves and curved shape with horizontal supporting members made out of size 4"x11/4". The overall size of the Sofa will have 100mm thick foam Cushions (32 D) in seat (Fixed over flat Zig Zag spring) and 50mm thick foam cushion in back and 50mm thick foam on arm rests covered with tapestry cloth costing upto Rs. 500/- per meter. The Sofa will be melamine polished in Walnut shade complete in all respect as per design and sample approved by Engineer-in-charge and client department.

Supply of Sofa Set 3 seater. The frame of the Sofa shall be made of teak wood members round turned front legs made out of size 3"x3" with grooves and hard carving design with curved shape on the upper portion to blend with U shape back (made from Hardwood) and the rear legs to be is made out of 21/2"21/2" teak wood with grooves and curved shape with horizontal supporting members made out of size 4"x11/4". The overall size of the Sofa will have 100mm thick foam Cushions (32 D) in seat (Fixed over flat Zig Zag spring) and 50mm thick foam cushion in back and 50mm thick foam on arm rests covered with tapestry cloth costing upto Rs. 500/- per meter. The Sofa will be melamine polished in Walnut shade complete in all respect as per design and sample approved by Engineer-in-charge and client department.