REPAIRS MAINT OF BOUNDARY WALL SECURITY FENCING COVERED DRAIN AND FOOTPATH UNDER AGE BR I AT OLD NAVY NAGAR UNDER GE NW NAVY NAGAR COLABA MUMBAI

Amount

Demolition of brick or stone / boulder work, built in cement mortar in portion/ part ordered to be dismantled including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.

Material and labour brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and as directed.

Taking down cement or cement lime plaster on brick or stone walls, any description , including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed.

Material and labour rendering 15mm thick in CM (1:6) on wall finished even and fair without using extra cement as in patches all as specified and directed by Engr -in- Charge.

Preparing of new decorated surfaces of walls by washing the surface thoroughly , filling the cracks, craves with crack-filling-compound (Make : DR FIXIT CRACK SHRINK FREE or Equivalent ) applying two coats of acrylic emulsion exterior grade (100%) over a coat of primer etc complete all as specified and as directed.

Preparing of old decorated surfaces of walls by washing the surface thoroughly , filling the cracks, craves with crack-filling-compound (Make : DR FIXIT CRACK SHRINK FREE or Equivalent ) applying two coats of acrylic emulsion exterior grade (100%) over a coat of primer etc all as specified. Note : - (a) Old surface shall be cleaned with bleaching powder as specified and as per manufacturers instructions , all cracks shall be filled with white cement and sand mortar (1:3) by making V- grooves . (b) Acrylic painting shall be done with rollers.(c)Fungus formation be cleaned throughly with wire brush or by any means complete all as specified and as directed.

Preparing of old decorated surfaces of walls by washing the surface thoroughly , filling the cracks, craves with crack-filling-compound (Make : DR FIXIT CRACK SHRINK FREE or Equivalent ) applying one coat of acrylic emulsion exterior grade (100%) etc all as specified. Note : - (a) Old surface shall be cleaned with bleaching powder as specified and as per manufacturers instructions , all cracks shall be filled with white cement and sand mortar (1:3) by making V- grooves . (b) Acrylic painting shall be done with rollers.(c)Fungus formation be cleaned throughly with wire brush or by any means complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for embedded in PCC /Brick work complete all as specified and as directed.

Material and labour Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde E-165 complete all as specified and as directed.

Supply and fixing Framed brackets / purlin of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc., conforming to Fe 290 Gde E-165 complete all as specified and as directed.

Excavation in post holes (or similar holes) each n.exc 0.5 cum getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers n.exc 25 cm watering and removing surplus soil to a distance n.exc 50m and making good complete all as specified and as directed.

Material and labour Hard core of guage exc 63mm but not exc 100mm,deposited spread and levelled in layers n exc 15 cm thick,watered and rolled/rammed to true surface with broken stone/boulders complete all as specified and as directed.

Material and labour PCC 1:2:4 type B-2(40 mm graded aggregate) in foudations,filling and mass concrete complete all as specified and as directed.

Material and labour Mild steel work as in (angle iron) as in flat iron,fencing post, struts incl cutting top shape as directed bent to shape drilling holes, hotching for wire etc complete confirming to FE-410-0 or 310-0 complete all as specified and as directed.

Supply only chain link MS galvanized fencing of any mesh size and type complete all as specified and as directed.

Fixing only chain link fencing including line wires, any mesh size and type of standards rails straining bolts etc incl provision of binding wire complete all as specified and as directed.

Preparation of new steel surface of any description exc 10cm in width or girth and applying 2 coats of synthetic enamel paint over coat of red oxide primer complete all as specified and as directed.

Mild steel screw bolt (machine made 11 to 15mm dia of shank with hexagonal or square heads at one end and screwed the other or screwed both ends each screwed and to be fitted with washers and one hexagonal or square nut length of bolt n.exc 5cm long complete all as specified and as directed.

Demolition of reinforced cement concrete of any description and at any position complete all as specified and directed by Engg-In- Charge. Note : The quoted rates deemed to be inclusive for removal of demolition material out side of MoD land.

Material & Labour for mild steel T M T bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by Engg-In- Charge.

All as per item No 20 but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and as directed by Engg-In- Charge.

Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and as directed by Engg-In- Charge.

Use and wase of formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and as directed by Engg-In- Charge.

Material & labour RCC (1:2:4) type B1 using 20mm graded aggregate for Columns, pillars, piers, posts and struts and complete all as specified and directed.

Material & labour for RCC (1:2:4) type B1 using 20mm graded aggregate for foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, basement slabs, under-reamed piles and mass concrete complete all as specified and directed by Engineer-in-Charge..

Material and labour MS plate plain/ Chequered of required thickness over as in manhole cover fixed to angle iron frame with three Nos of hinge and 150mm handle complete all as specified and as directed.

Supply and fixing in repairs galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails strain-ing bolts, including, tying at crossing with and provision of galvanised mild steel wire, staple or steel pins etc complete all as specified and as directed. (each line wire to be measured).

Supply and fixing in repairs barbed razor type concertina coil 9 SWG hot galvanised spring tensile wire of UTS 145 to 150 Newton per square mm zinc coating 250-300 grams per sqm dia of coil when unstretched 460 mm covering 8 to 10 running meter per coil and minimum weight of coil (GI strip) 1.625 kg per running metre hot dip galvanised razor ribbon tape of size 0.50 mm thickness, 19 mm wide before wrapping on central core wire fixed 1.66 mm thick GI clip minimum 25 nos per running metre and special nut bolt to hold two coils together and extra two rows parallel wire of 10 gauge complete all as specified and as directed .

Material and labour PCC type C2 1:3:6 (40 mm graded agg)in surface channel and drain complete all as specified and as directed.

Material and labour PCC Type B1 1:2:4 (20mm graded agg) as in benching to manholes including weathering , slightly rounded or chamfered angles all as specified complete all as specified and as directed.

Material and labour PCC Type B1 1:2:4 (20mm graded agg) as in coping to manholes including weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed.

Dismantling stone slab including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Material and labour for Machine pressed precast coloured glazed concrete interlocking paver block with grey cement & pigment, glossy finish (reflective type) any shape and size (as approved by GE) confirming to IS 15658-2006 of 60mm thickness, M-35 Grade, as in pavements to required level & gradients, set, jointed with clean dry sand and sealing the ends using PCC 1:2:4 etc complete all as specified and as directed.

Material and labour for Sand filling under floors or in foundation including watering and consolidation etc complete all as specified and as directed.

Material and labour coloured glazed cement concrete chequered tiles 300 x 300 x 25 mm thick, machine pressed , glossy finish (reflective type), any design (as approved by GE); set jointed and pointed in neat cement slurry over and including 20 mm thick cement screed in cm 1:6 complete all as specified and as directed. (Note : Cost for 20 mm thick cement screed is inclusive in the rate.)

Material and labour machine cut pre-polished kota stone slab flooring 20-25mm thick over and including 15 mm thick cement screed base (1:3) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete (Note : The rate includes the cost of cement screed bed)

Material and labour machine cut pre-polished kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over and including 10 mm thick cement plaster in cm (1:3) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed. (Note : The rate includes the cost of cement plaster )

Material and labour udaipur White marble/Green marble slab 18-20 mm thick over vertical surfaces of wall, columns pillars and lintel soffit etc and similar work machine cut, bedded and jointed with grey cement slurry over and including 10 mm thick screed bed in cement mortar 1:3 and pointed with white cement using marble dust with admixture of pigment to match the shade of marble slab including grinding , polishing and rounding the edges complete all as specified and as directed. (Note : The rates included the cost of cement screed bed 10 mm thick)

Material and labour coloured glazed parking tiles 300x300x10 mm thick, glossy finish (reflective type), any design (as approved by GE) set jointed and pointed in neat cement slurry over and including 20 mm thick cement screed in CM 1:4 complete all as specified and as directed.(Note : cost for 20 mm thick cement screed is inclusive in the rate No seperate payment to be made)

Material and labour for two coats of floor paint (Indigo or Equivalent) on old surfaces of chequered tiles/paver blocks in floor including brooming and cleaing the surfaces with water complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Supply and fixing designer wall tiles of 12 mm thick set & jointed in neat cement slurry & pointed in white cement mixed with colour pigment to match the colour of tiles over and including 10 mm thick cement plaster in CM 1:4 complete all as specified & directed by Engr-in- Charge. (Pattern and design of the tile shall be as per approval of GE.

Material & labour for designer pattern ceramic tiles in vertical surface 300x450x7 to 8 mm thick set and jointed in neat cement slurry over and including 10mm thick cement plaster in cement mortar (1:4) and pointed in white or coloured cement to match complete all as specified and as directed by Engg-In-Charge (Note : (i) The rate includes the cost of cement screed bed

Taking out shrubs/vegetation growth from building at any height and at any location with root and applying a glyphosat pesticide or any other equivalent pesticide in a ratio of 1:50 with water on roots including taking down cement plaster not exc 0.50 sqm for each tree and making good surface by plastering the same area with 20 mm thick plastering in cement mortar 1:4 and finishing the surface to match existing surface with necessary scaffolding and other required T&P complete all as specified and as directed.

Cleaning existing drainage / culverts of any depth including removing cover slabs/grill , soils , spoils , vegetation , silt etc and refixing/placing of removed cover slabs/grill including making good in cement mortar 1: 3 and removing material outside the MoD land complete all as directed and specified.

Dismantling of Plain or corrugated FRP /Steel chajja any Guage thickness including all fittings and removal from MoD land complete all as complete all as specified and as directed by Engr In Charge

Supply and fixing Pre painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed.

All as per item No. 47 here-in –before but except sheeting( any thickness).

Supply and fixing Diving board of 2.00 mtr long, F.R.P laminated with 99.7% water resistant polyester resin compositely reinforced with csm-450 chopped glass strand mat. Moulded with anti slippery top laminated with wr-300 mat. Thickness 2.5"-1.5" width 20" with MS Fulcrum (standard roller & stand) complete all as specified and as directed.

Supply and fixing Diving board 4.80 mtr F.R.P laminated with 99.7% water resistant polyester resin compositely reinforced with csm-450 chopped glass strand mat. Moulded with anti slippery top laminated with wr-300 mat. Thickness 2.5"-1.5" width 20" with MS Fulcrum (standard roller & stand) complete all as specified and as directed.

Taking down and removing the existing plaster, tile and adhesive by chipping and grinding the surface washing complete removing debries outside of MoD land complete all as specified and as directed.

Material and labour Rakingout Joints & cracks by grinder ( 5mm deep grove) and seal with cementitious material all as per manufacturer instructions complete all as specified and as directed.

Material and labour epoxy injection, grouting to the pool shell with 145 PSI pressure machine all as per manufacturer instructions complete all as specified and as directed.

AcrylicPolymercoat : Material and labour Providing and applying acrylic polymer elasto-meric water proofing membrane to the pool shell to counteract crack formation developed by varrying water load on the pool shell internally ( internal treatment) all as per manufacturer instructions complete all as specified and as directed.

Material and labour sprinkling the acrylic modified chatt dabba plaster over the same with perma latex additive in CM 1:3 (5mm) for adhesion to receive plaster(internal treatment) all as per manufacturer instructions complete all as specified and as directed.

Polymer modified Plastering: Material and labour Providing & Applying the waterproofing plaster to the pool shell including waterproofing compound in 1:4 line, level internally and externally etc with neat cement finish, curing etc ( internal treatment) all as per manufacturer instructions complete all as specified and as directed.

Polymer modified Screed Coba : Material and labour Providing & Applying Polymer modified Screed coba in CM 1:4 to the Bottom of pool with aggregate sandwiched in base coat 20mm to 30mm and final coat 10-15mm in line, level etc with neat cement ( internal treatment) all as per manufacturer instructions complete all as specified and as directed.

Glass Mosaic Tile: Supplying and fixing glass mosaic tile of approved colour and approved design on white tile adhesive and filling the joints with white polymer tile grout complete all as specified and as directed.

Material and labour for stainless steel special alloy grade 304 pipes as in railing including required cutting, notching Argon welding, riding and drilling counter sunk holes and bending to required shape by mechanical means in factory as per site requirement without forming wrinkles and butting and polishing complete all as specified & directed by Engineer-in-charge.

Material and labour Steel work in tubular railing including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified & directed by Engineer-in-charge.

Supply and fixing Precast RCC (1:2:4) Jali of approved size and design, jointed each pannel with CM(1:3) groved, placed complete all as specified and as directed.

Supply & fixing 3mm thick Aluminium composite panel cladding plain of approved colour/shade to facia of slab/beam/column/slab in circular/ rectangular shape including cutting, notching, bending to shape as required jointing with silicon gel of approved colour, with and including aluminium square tubular hollow section 25 x 25 mm not exceeding 900 mm c/c on MS pipe purline/rafter/column beam/slab to hold ACP cladding etc including takingdown old unserviceble aluminium composite panel. (Note : Colour / Pattern of ACP sheet shall be as approved by GE) complete all as specified and directed by Engineer-In-Charge

RAMESH ENTERPRISES

S S ENTERPRISES

Unity Enterprises

ASHOK CONSTRUCTION

Garima Construction Co

siddharth and company

BOB ENTERPRISES

SHREE JAGDISH FURNITURE CO.