REPAIR TO JOINERY, SANITARY FITTINGS, FLOORING, TILING, PLASTERING INCL ALLIED WORKS ETC AT MH AREA UNDER GE (U) E/M MEERUT CANTT.

Amount

Demolition of brick work built in cement mortar including all arches, pillars all quoins etc complete all as directed.

Material and labour for brick work with fly ash bricks straight or curved on plan to any radius built in CM 1:6 all as specified and directed by Engr -in-Charge

Ditto as per item No 2 above but except brick.

Dismantling wall/ ceiling boards(fibre pulp insulation etc.) or insulations boards /slabs/blankets any thickness incl. cover fillets and aluminium snip grid complete all as specified and directed.

Supply and fix anodised aluminium snap grid 605x605 mm frame wk for false ceiling and providing E board false ceiling 60X60 cm in size fixed with on frame work or with staple on snap grid as in ceiling flat or sloping all as specified and directed. Make : everest /Armstrong /Saint Gobin/ Diomond international inex Pvt Ltd

Supply and fix in repair 5mm thick insulated plain colour PVC sheet in strips & channel feathered at the edges for fixing on Solid PVC Wall Lining,Insulated PVC Wall Lining, and Solid PVC Partitions inclusive of Solvent Cement and fixing at site complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified and directed.

Dismantling floor hearth or wall tiling incl cement mortar bedding/plaster (but not backing) and removing rubbish off the premises etc complete all as specified and directed.

Demolition of concrete ( un reinforced ) in ground floors and paving nexc 15 cm thk (below or above ground level) complete all as specified and directed.

Material and labour 25 mm thick P.C.C 1:2:4 type B-1 using 20 mm graded aggregate in sub base complete all as specified and directed.

Material and labour machine cut kota stone slab flooring 20-25mm thick over and including cement screed based 15 mm thick in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl cutting rubbing and mirror polishing complete all as specified and directed.

M & L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square or Rectangular) area of each tile exc. 0.11 Sqm but not exc. 0.18 sqm, as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile including 15mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified and directed.

All as per item No 12.00 above but on skirtings incl 10 mm thick rendering coat in CM (1:4) complete all as specified and directed.

Material and labour for vitrified coloured ceramic tiles 10mm thick (square/rectangular) polished area dark shed of each tile exc. 0.18 sqm but n exc 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm th screed bed in CM 1:6 complete

All as per item No 14.00 above but on skirting including 10 mm thick rendering coat in CM 1:6 complete all as specified and directed.

Material and labour for glazed digital coloured ceramic tiles 350 mm x 250mm/450mmx350x7 to 7 mm thick as in vertical surfces set & jointed in neat cement slurry & pointed in coloured cement incl backing coat 10mm thick in CM 1:4 complete all as specified and directed.

Taking down chowkats or frames with shutters ( without taking off shutters from the frame) exc 1.5 sqm but n.exc 4 sqm each complete all as specified and directed.

All as per item No 17.00 above but n.exc 1.5 Sqm each complete all as specified and directed.

Taking down shutter of any description exc. 1 sqm but not exc 2 Sqm each complete all as specified and directed.

Supply & Fixing PVC door frame (50x47) mm made out of plain colour5 mm thich PVC Sheet re in forced with MS Square Tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick ( Style ) consisting of frame made out of MS Tubes for top & bottom rails.MS frame shall be covered with heat moulded plain colour PVC ' C 'Channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC Sheets for top rail , lock rail & bottomrail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC Sheet to be fitted in the MS Frame welded / sealed to stiles & rails with suitable PVC Sheet beading, jointed together with solvent cement,supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S & F box type steel window double leaf double shutter (gauge shutter will open inside and glaze shutter will open outside) with side hung shutter including box type hinges with peg stay 300mm long and 100 mm long handles of Z Section welded to frames & 150 mm long tower bolt welded to shutter one each at top and bottom to each shutter complete with glazing bar for one shutter and gauze bars of FI 10x 3mm thick dovetailed or welded including 12 mm sqm guard bars 150 mm centre to centre All as specified (Note:-Glass and wire gauze shall be measured and paid seperately)..

S&F aluminium window shutter side hung glazed/ gauzed shutter with frame using with aluminium extruded section of Make- Jindal, Hindalco or Nalco, box section of size 63.50 mm X 38.10 mm for frame and 47.62mm x 44.45 mm for shutter styles and rails, thickness of aluminium sheet 1.25 mm and glazing with and including 5 mm thick tinted float glass fixed with and including aluminium U channel and glazing plates at bottom including aluminium anodized triangular glazing beading with U rubber stays etc with and including aluminium anodized fancy grill and stainless steel wire cloth 0.36 mm nominal dia of wire and average width of apperture 1.40 mm and fixed with suitable size of aluminium anodized strips fixed to aluminium frame (chowkhats) including provision of stainless steel hinges of 75mm size 02 Nos on each shutter, aluminium anodized fancy type handle of suitable size 02 Nos for each shutter, aluminium anodized tower bolt of extruded section 125mm long 02 Nos on each shutter complete all as specified and directed.

Material and labour Providing and fixing anodised aluminium partition work for doors, windows, ventilators and partitions (Fixedportions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom (half portion) and sides with required 12 mm thick EPDM board with rubber/ neoprene gasket and top of half portion with 5.0 mm thick glass with Aluminium snap beading for glazing/ paneling etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, , C.P. brass/ stainless steel screws, all complete as and the directed.

S&F aluminium anodised sections doors comprising glazed shutters with frame using aluminium anodised extruded sectiions of size 63.50mmx38.10mm for frames, 85mmx44.45mm for stiles, 83.50x44.45mm for top and middle rails , 100mm44.45mm for bottom rail of shutters having 1.25mm thickness, glazing with 5mm thick tinted sheet glass fixed with and including aluminium anodised snap beadings, neoprene gaskets, shutters fixed to frame with with 125 mm size stainless steell butt hinges -03 Nos per leaf, aluminium anodised fancy extruded section 200mm long handle-01 No per leaf, aluminium anodised Tower bolts 200mm long -02 Nos per leaf, aluminium anodised aluminium body hydraulic door closer 01 No per leaf of suitable capapcity, floor door stopper of anodised aluminium body 150mm long 01 No per leaf, brass Mortice lock 6 lever of required size -01 No per door complete all as specified and directed. Make: Jindal/Indal

S&F pressed steel door frames with one or more rebates incl necessary fixing lugs, hinges, lock strike plates of size 105 X 60mm complete all as specified and directed.

S&F pressed steel door frames with one or more rebates incl necessary fixing lugs, hinges, lock strike plates of size 125 X 60mm complete all as specified and directed.

S & F factory made 35 mm thick glazed & skeleton shutter of 2nd class hard wood open rebated and prepared to receive gauge (divided into squares with sash bars) edges of framing plain chamfered or rounded, fitted without & fitted beads for securing glass etc, sizes of members of shutters as specified in SSR Pt-I Sec-8 clause 8.23 (a) and fitted to chowkhats complete all as specified and directed.

S & F factory made 35mm thick plain, framed, panelled shutters (two panels), with lock rail and panels of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS 1003(Part I), kiln seasoned and chemically pressure treated,with second class hard wood rail and style.complete all as specified and directed.

S&F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides,ISI marked, complete all as specified.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stanless steel wire staples.

S&F 3.0 mm th sheet glass ordinary quality plain and glazing with oil putty in square n'exc .5 sqm in each pane.

M & L for preparation of new wooden surfaces exc. 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M & L for preparation of old wooden surfaces exc. 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M & L for preparation of old steel surfaces exc. 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

S & F 100 mm long aluminium anodised barrel tower bolt complete all as specified and directed.

S & F 150 mm long aluminium anodised barrel tower bolt complete all as specified and directed.

S & F 100 mm long extruded anodised aluminium alloy handle, complete all as specified and directed.

S & F of 150 mm long extruded anodised aluminium alloy handle, complete all as specified and directed.

S&F 100 mm MS, Butt hinges,medium weight cold rolled mild steel fixed with screw complete.

S&F 125 mm MS, Butt hinges,medium weight cold rolled mild steel fixed with screw complete.

S & F of 300 mm long (length of bolt) aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolt or cast aluminium alloy complete all as specified and directed.

Taking down cement plaster of any description from brick or stone wall etc incl raking out joints and hacking for key, scrubbing down with water etc complete.

Material and labour for ready mix rendering 10 mm thick on fair faces of brick walls finished even and smooth w/o using extra cement as per manufacture all as specified & directed by Engineer-in-Charge.

Material and labour for rendering ready mix 15 mm thick in CM 1:4 on fair faces of brick work or conrete surfaces finishing the surfaces even and smooth without using extra cement as per manufacture all as specified & directed by Engineer-in-Charge.

Material and labour ready mix 5mm thick rendering to concrete surfaces as in ceiling finished even and smooth without using extra cement in patches complete as per manufacture all as specified & directed by Engineer-in-Charge.

Material and labour three coats of white wash to new plastered surfaces on ceiling including preparation of surfaces complete all as specified & directed by Engineer-in-Charge.

Material and labour for preparing new plastered surfaces & applying two coats of cement base paint on walls complete all as specified. .

Material & Labour for Preparing old decorated plastered or unplastered surfaces of walls by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots Washing, rubbing down and stopping of distempered and painted surfaces applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm complete all as specified.

Material and labour for preparation of new plastered surfaces of wall & applying two coats of oil emulsion distemper over 1mm thick wall care putty complete all as specified.

Taking down aluminium door with shutters of any size , reparing of hinge block and replacement of rubber beading and hydraulic door closer as per site required and plate and fixing of door and shutters in the same opening in its position complete all as specified and directed. Note : The cost of rubber beading and hydraulic door closer including fitting are included in this item and not to be paid separetely, complete all as specified and directed .

Material and labour In repair 12 mm thick prelaminated particle boards, grade 2 quality, interior grade, commercial type fixed with nails to timber frame work as in cupboard shelves, kitchen, cupboards partition etc complete all as specified and directed.

Taking down aluminium door/window glass with neoprene rubber and beading and S&F 5.5 mm thick figured glass in door by means of neoprene rubber ,aluminum beading or with other means with suitable fixing in opening specified and directed

Supply & fix 15 mm bore, tubes medium grade, galvanized with all fittings and fixed to walls and ceiling or laid in floors including Taking up or down GI steel tubing, testing complete all as specified & directed.

Supply, fix 20mm bore, tubes medium grade, galvanized with all fittings and fixed to walls and ceiling or laid in floors including Taking up or down GI steel tubing, testing complete all as specified & directed.

S&F as in repair 15mm bore pillar tap, long shank, swan neck, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts complete all as specified & directed.

S&F as in repair 15 mm bore bib tap chromium plated, cast copper alloy, with crutch or butterfly handle, flange, screwed down for iron pipe or for brass ferrule, complete all as specified and directed.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including plastic seat cover black closed pattern with flat bottom and cover mild steel chromium hinhes device and zet sprey ccomplete all as specified and directed.

S&F in repair PVC valve less syphonic action type flushing cistern low level white with PVC in let ball valve, float and handle, 10 ltrs capacity and connection to pipes including 32mm dia PVC long bend for squat pattern etc , set with concrete and making good to floor. complete all as specified.

S&F in repair Vitreous China wash basin, white, flat back, size 550 x 400 mm, including fixing acessories like galvanised brackets & plag bolts,32 mm CP waste coupling complete all as specified.

Supply & fix in repairs PVC connections of 600mm long Make suitable for 15mm dia iron pipe including PTMT nuts complete all as specified & directed.

Supply and fix in repairs PVC waste pipes of 40/32mm bore suitable for wash hand basins/sinks complete all as specified & directed.

S&F in reipair CP towel rail brass 20mm dia 600mm long with bracket CP finish complete all as specified and directed.

Supply & fix in repairs steel C.P. grating 150 mm dia waste pipe hole fitted as required at site complete all as directed by Engineer-in-Charge.

S&F in repair 15 mm bore stop cock, chromium plated, cast copper alloy, screwed down with crutch or butterfly handle screwed both ends, as in repair including flench complete all as specified & directed.

S&F in repair 600X450 mm looking mirror edge of slected quality glass mounted om 6 mm thick AC building board or commercial ply wood and fixed to wooden pluge with chromium brass screwes and put up washers etc complete all as specified and directed.

Dismantling of 100/110 cast iron, PVC or reinforced concrete pipes jointed in cement mortar and taking out of trenches, if required all as directed by Engr-in-charge

S&F of 110mm dia UPVC ultra drain,SelFit pipes, single socketed, ISI marked, IS-13592 type 'B' in any length, jointed with solvent cement fixed in walls and floors

S&F of UPVC bend equal of any radius without door, ISI marked, IS-14735, jointed with solvent cement for 110mm size pipes.

Dismantling of 75 cast iron, PVC or reinforced concrete pipes jointed in cement mortar and taking out of trenches, if required all as directed by Engr-in-charge

S&F of 75 mm dia UPVC ultra drain,SelFit pipes, single socketed, ISI marked, IS-13592 type 'B' in any length, jointed with solvent cement fixed in walls and floors

S&F of UPVC bend equal of any radius without door, ISI marked, IS-14735, jointed with solvent cement for 75 mm size pipes

S&F in repair vitreous china squatting pan Orissa pattern, size 580 x 440mm, white, with integral footrest, including flushing cistern & flush pipe with ‘P’ or ‘S’ trap, including making good the disturbed surfaces and to match with existing surface.all as specified and directed.

S&F in repair 20 mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed

Cleaning & removing all scale and dirt etc from PVC water tank and from mouths of circulating pipes etc of capacity exc. 250 liters and n.exc. 500 ltrs including disconnecting and refixing all parts required to be disconnected for cleaning of the tanks , complete all as specified & directed.

All as per item No. 75 above but of capacity exc 500 liters and n.exc. 1000 liters

Supply & fixing rotational moulded polyethylene water storage tanks 500 liters capacity, 3 layers (cylindrical, vertical in closed top) hoisted and fixed in position with all fittings all as specified including 20 mm PVC ball valve including dismantling existing water tanks ncluding taking out out PVC water tankscomplete all as specified & directed.

Supply & fixing in rotational moulded polyethylene water storage tanks 1000 liters capacity, 3 layers (cylindrical, vertical in closed top) hoisted and fixed in position with all fittings all as specified including 20 mm PVC ball valve including dismantling existing water tanks including taking out out PVC water tanks complete all as specified & directed.

Taking down old existing unserviceable floor door stoppers and S&F floor door stoppers of aluminium alloy body and tongue, anodised with hard drawn steel spring , fixed in floor , overall length of cover plate 140 mm long complete all as specified.

Taking down of existing unserviceable door closer and S&F Aluminium ( Extruded section ) body Door closer hydraulically regulated, designation No. 3 , universal type , suitable for door shutters 851 to 1000 mm in width and of weight between 61 to 80kg complete all as specified and directed.

Hacking out old broken glass ( any thickness, size, quality or discription) from metal/wooden frames fixed with pin, beading or oil putty

S&F 3mm thick sheet glass ordinary quality any size and in any type of frame and glazing with oil putty (or beading ) in square n.exc 0.5 Sqm in each panes complete

S&F 3mm pin headed thick sheet glass ordinary quality any size and in any type of frame and glazing with oil putty (or beading ) in square n.exc 0.5 Sqm in each panes complete

S&F 5.0 mm thick sheet glass ordinary quality any size and in any type of frame and glazing with oil putty (or beading ) in square n.exc 0.5 Sqm in each panes complete

S&F in repair galvanized stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm and including fixed with tinned tacks, wooden beading, Metal frame for securing wire gauge with wire stappler complete all as specified.

S&F in repair 15 mm dia brass chromium plated central hole wash basin mixture, fancy type with or without lettered 'Hot' or 'Cold' ,with long screwed shanks and fly nut capstanhead screwed for 15mm dia pipe fixed in repair.

S&F in repair 15 mm dia brass chromium plated wall mixture, fancy type with or without lettered 'Hot' or 'Cold' ,with long screwed shanks and fly nut capstanhead screwed for 15mm dia pipe fixed in repair.

S&F in repair vitreous china wash down half stall urinal flat back size 465X355X265mm white (mim) with grating and union for discharge pipe

S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 m long flexible tube and ABS wall hook including connections and fixed in position complete all as specified and directed. Make :- Hindware, Paryware, Jaguar

S&F in repair 15 mm bore stop cock, chromium plated, cast copper alloy, screwed down ( Concelaed) type) with crutch or butterfly handle screwed both ends, as in repair including flench complete all as specified & directed.

S&F Swivel CP shower rose including arm 195 mm long with bend of 45 digree with flange

Dismantling plain or corrugated asbestos cement ( corrugated semi-corrugated etc) sheets in roof covering

Dismantling wrought iron or mild steel work of any desription not other wise provided

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick AZ 150 of an colour having tensile strength of 550 Mpa as in roof covering / clading to wall fixed self tapping screwe/ J or L type cranked hook bolts complete Make : JSW/TATA or its equivalent.

Ditto as per above item but plain sheet as in ridge all as specified and directed

S&F rolled sections as in main and cross beams , hip and jack rafters , purline where connected to common rafters and running rails and guides for sliding doors , fixed with angle cleats or other connecting plates confarming to Fe-410 Gde E-250 quality

Material and labour preparation of new steel surfaces of any description n,exc 10 cm girth including holderbats distance pieces etc with two coat synthetic enamal paint over a coat of red oxide primer etc complete all as specified and directed.

BHAGWAN DAS & Co

M/S KAPIL ENTERPRISES

M/S AGARWAL CONSTRUCTION CO.