REPAIR AND REPLACEMENT OF CGI SHEET AND WALL PANELING AND CEILING AND WOODEN FLOORING OF VARIOUS BLDGS AT BASE CAMP UNDER AOR OF AGE BR-II UNDER GE PARTPAUR

Amount

Dismantling wall and ceilling board (fibre, pulp, insulation etc) or insulation board/slabs/blanket any thickness including cover fillets.

Dismantling of plain or corrugated steel sheeting any gauge, thickness including Nainital or similar pattern roof covering.

S&F Galvanised MS sheeting of 0.63 mm thick corrugated ISI Marked and made with two corrugation side laps and fixed with J hookes two framed work with PVC and steel washers as in roof & wall all as spd and as directed by Engr-in-Charge with Zinc coating of 275

S&F plain, galvanised MS sheeting of 0.63 mm thick in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275

Preparation of new steel surfaces of any description over 10cm in width or girth, not otherwise described, and applying two coat of synthetic enamel paint over one priming coat of red oxide complete all as specified and as directed by the Engineer-in-Charge

Taking down chowkats or frames with shutters (with out taking off shutters from the frames) n. exc 1.50 Sqm each.(Steel/Wooden)

Taking down chowkats or frames with shutters (with out taking off shutters from the frames) exc 1.5sqm but n. exc 4 Sqm each.(Steel/Wooden)

S & F plain, solid, straight 2nd class hard wood frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints.

S & F 2nd class hard wood 30 mm thick glazed and skelton shutters, open rebated & prepared to receive wire gauge (with sash bars) edges of framing plain chamfered or rounded, fitted with cut and mitread beads for securing gauge etc, sizes of members of shutters as specified in SSR Pt-I, section 8, clause 8.24 (a).

S&F 40 mm thick 2nd class hardwood, plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particles board medium density, wood particle board with commercial face veneers; supplied and fitted to chowkats

M&L for painting to wooden surface of any description not other wise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer on ply wood including preparation of surfaces etc complete

S & F butt hinges 100mm mild steel cold rolled, medium weight.

S & F butt hinges 75mm mild steel cold rolled, medium weight.

M&L 9 mm thick veneered decorative plywood, grade 1 ( with BWR resin) with only one side decorative face veneers fixed with nails as in wall panelling, complete all as specified and directed by Engr-in-charge..

M&L 9 mm thick veneered decorative plywood, grade 1 ( with BWR resin) with only one side decorative face veneers fixed with nails as in ceiling works, complete all as specified and directed by Engr-in-charge..

S&F in repair second class softwood plain fillets,rectangular in section, clean sawn, secured with nails exc 13 and n.exc 25, complete all as specified and directed by Engr-in-charge.

Supply & fix 30 mm thick flush shutter of size (2.10 x 1.0 ) m, solid core construction, with particle board core with both faces covered with decorative face veener with lipping/ frame to match

Supply & fix in repairs MS sliding door bolts 250 mm long clip type, stove enamelled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on stapple plate and fixed, complete all as specified and directed.

Supply & fix in repair MS pressed handles, stove enamelled black 125 mm long all as specified, complete all as specified and directed.

Supply & fix 6mm thick plywood grade BWR, type BB grade all as directed and specified.

Supply only 9 mm thick prelaminated particle board exterior grade both side laminated board complete all as specified and directed.

Supply & fix 12 mm thick prelaminated particle board exterior grade both side laminated board complete all as specified and directed.

Taking down shutters of any descxription exc 1 sqm but n. exc 2 sqm each complete all as specified

Supply & fix in repairs MS barrel tower bolt 150mm long stove enamelled black, complete all as specified.

Supply & fix in repairs extruded aluminium alloy handles, fabricated type, anodised 125 mm size, complete all as specified and directed.

Supply & fix in repairs150 mm long aluminium anodised barrel tower bolts of extruded section, complete all as specified and directed.

Supply & fix in repairs to steel window handles, peg stays & Hinges etc (Including welding if required), complete all as specified and directed.

M&L in repairs of wooden beads 2nd class soft wood exc 3 sqcm n.exc 6 sqcm of any size for cup board & glazed or gauged joinery mitres etc, complete all as specified and directed.

S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire stapple with screws to steel windows by drilling holes if not existing and wooden beads to wooden joinery, Cost of beads of flat iron and wooden beads included in the rate, complete all as specified and directed.

Hacking out old broken glass any thickness size, quality or description from wooden/steel frames fixed with wooden beads/metal pinning and S&F 3 mm thick sheet glass in squares not exc 1.20 sqm in each pane fixed with wooden beads or putty (in metal frames etc), complete all as specified and directed. (Up to four Storey)

M&L glass pane 4mm thick glass of any description in existing steel frame with putty including removing of old putty, complete all as specified and directed.

M&L for 250mm wide PVC wall cladding fixed with screws to walls etc

M&L 6mm thick ply wood as in ceiling fixed with nails to timber framed work (grade BWR type BB)

M&L 6mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face; fixed with screws to timber frame work on walls

M&L in repairs for wooden flooring by laying foam cushioning on top of floor to receive interlocking wooden floor tiles and fixing with all corner by beadings including removing of old decayed interlocking wooden tiles from existing wooden flooring complete all as specified and directed

M/S Behl Sons

osho traders

M/S GLOBAL ENGINEERS

M/S SONAM RIGZIN

M/S LIBE & CO

M/S BHAT ENGINEERS

M/S MUNEER HASSAN AKHON