Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹50.9 LAccepted-AOC | L1 | Accepted-AOC Being Lowest | |
| 2 | L2₹53.9 L+₹78,560 (1.48%)Rejected-Finance B 13 ROOM NO 2 2 SHIVA PALM BEACH SOCIETY SECTOR4 NERUL WEST NAVI MUMBAI 400 706 | THANE | MAHARASHTRA | 400706 | L2 | Rejected-Finance Other than being lowest | |
| 3 | L3₹56.7 L+₹3.5 L (6.67%)Rejected-Finance A 303 SHREE KRISHNA COMPLEX CO OP HSG SOC LTD WESTERN EXPRESS HIGHWAY OPP NATIONAL PARK BORIVALI E MUMBAI 400066 | MUMBAI SUBURBAN | MAHARASHTRA | 400066 | L3 | Rejected-Finance Other than being lowest | |
| 4 | L4₹58.9 L+₹5.8 L (10.9%)Rejected-Finance FLAT NO 002 MAHAVIR VILLA CHS LTD PLOT NO 259 SECTOR 21 NERUL EAST NAVI MUMBAI 400 706 | NAVI MUMBAI | THANE | MAHARASHTRA | 400706 | L4 | Rejected-Finance Other than being lowest | |
| 5 | L5₹60.6 L+₹7.4 L (14.0%)Rejected-Finance | L5 | Rejected-Finance Other than being lowest |
Tender Value
Refer Docs
EMD Value
₹1.5 L
Closing Date
27 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE (NW) Mumbai
Commander Works Engineer NW Dr Homi Bhabha Road Navy Nagar Colaba Mumbai 05
REPAIR AND MAINT TO CERTAIN BLDG IN ZONE 1 IN NAVAL DOCKYARD MUMBAI UNDER AGE BR I UNDER GE NW KUNJALI COLABA MUMBAI
2022_MES_540133_1
8485/CWE (NW) Mumbai/ E8
Open Tender
Civil Works
Item Rate
180 days
GE (NW) KUNJALI
Class C
7 documents required · 7 mandatory
₹1,000
Yes
GE (NW) Kunjali
₹1.5 L
Yes
15 Sept 2022
22 Jul 2022
29 Aug 2022
22 Jul 2022
27 Aug 2022
13 Aug 2022
22 Jul 2022 - 11 Aug 2022
Amount
Taking down chowkats or frame with shutter ( without taking off shutter from frame) , n exc 1.5 sqm each complete all as specified complete all as specified and as directed by Engr-in-Charge.
Taking down chowkats or frame with shutter ( without taking off shutter from frame) exc 1.5 sqm but n exc 4 Sqm each complete all as specified and as directed by Engr-in-Charge.
Taking down eaves gutters and rain water pipes (any size or pattern), including all fittings, heads, shoes, bends, swanneck, etc. including cleaning or refixing or removal to store complete all as specified and as directed by Engr-in-Charge. ( measured over all as fixed along the centre line over fittings and accessories)
Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed by Engr-in-Charge.
Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed by Engr-in-Charge.
Dismantling wrought iron or mild steel work of any description complete all as specified and as directed by Engr-in-Charge.
Dismantling false ceiling/boarding any description fixed in any position with nails complete all as specified and as directed by Engr-in-Charge.
Taking down 15mm bore, GI tubing and connections including cleaning for refixing or removal to store complete all as specified and as directed by Engr-in-Charge.
All as per item No. 8 above but 20 mm bore GI Pipe complete all as specified and as directed by Engr-in-Charge.
Dismantling 100/75 mm bore, cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches if required complete all as specified and as directed by Engr-in-Charge.
Dismantling floor hearth or wall tiling including cement mortat bedding but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by Engr-in-Charge.
Hacking out old broken glass (any thickness, size, quality or description) from wooden & Steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as directed complete all as specified and as directed by Engr-in-Charge.
Taking down cement plaster on brick/ surfaces built in cement mortar including raking out joints, bedding for key scrubbing down with water etc complete all as specified and as directed by Engr-in-Charge.
Demolition of plain cement concrete of any description and in any position not other wise specifically provided for complete all as specified and as directed by Engr-in-Charge.
Demolition of reinforced cement concrete of any description and in any position not other wise specifically provided for complete all as specified and as directed by Engr-in-Charge.
Demolition of brick work or stone /boulder masonry built in cement mortar, including all quoins, arches, pillars, etc complete all as specified and as directed by Engr-in-Charge.
Material and labour for brick work with sub class 'B' bricks (old Size) straight or curved on plan exc 6 m mean radius and built in CM (1:6) complete all as specified and as directed by Engr-in-Charge.
All as per item No. 17 above but half brick thick wall built in CM 1:4 complete all as specified and as directed by Engr-in-Charge.
Material and labour 100 mm thick PCC 1:2:4 type B-I using 20mm graded stone aggregates as in floor finished cement concrete surfaces even and smooth using extra cement complete all as specified and as directed by Engr-in-Charge.
Material and labour for 40mm thick PCC 1:2:4 type B I using 20mm graded stone aggregates as in floor finished cement concrete surfaces even and smooth using extra cement complete all as specified and as directed by Engr-in-Charge.
Supply and fixing Powder coated aluminium frame for doors, windows ventilators and partitions with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed by Engr-in-Charge.
Material and labour Sheet glass 4 mm thk, ordinary quality and glazing in aluminium beading with screws/ rebates in square exc 0.5 sq.m in each pane complete all as specified and as directed by Engr-in-Charge.
Supply and fixing stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.4mm complete all as specified and as directed by Engr-in-Charge.
Material and labour for aluminium anodized grill with suitable aluminium anodized frame of F/H section with suitable fixing screws/attachment etc complete all as per M/S Deco Grill Design No DG -102 , 7.5mm size grill i.e. made out of 75mm thick aluminium plate all as per manufacturer's specifications.
Material and labour for 12 mm thick pre-laminated Medium Density board,both side decorative lamination interior grade,fixed in aluminium/ wooden frame work complete all as specified and as directed by Engr-in-Charge.
Supply and fixing 100 mm Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, type B-11 complete all as specified and as directed by Engr-in-Charge.
Supply and fixing Aluminium anodised sliding door bolt 300m long, with hasp, staple (bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed by Engr-in-Charge.
Supply and fixing aluminium anodised Barrel tower bolts of extruded section, length of bolt 200mm complete all as specified and as directed by Engr-in-Charge.
Supply and fixing aluminium (Die cast) body, door closer, hydraulically regulated, desig. No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and as directed by Engr-in-Charge.
Material and labour for double action floor spring hydraulically regulated made up of minium 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed all as per manufacturer's instruction complete all as specified and as directed by Engr-in-Charge.
Supply and fixing Roller blinds type made out of standard cloth of approved texture with necessary accessories etc fixed on window openings complete all as specified and as directed by Engr-in-Charge.
Material and labour for vitrified ceramic tiles 10 mm thick (square /rectangular ) polished dark shade, area of each tiles not exceeding 0.36 sqm, in floor etc. set and jointed in neet cement slurry and pointed white or coloured cement to match the dark shade of the tiles, with and including screed bed in CM 1:6, 20 mm complete all as specified and as directed by Engr-in-Charge.
All as per item No. 32 above but as in skirting including 10mm thick rendering in CM. 1:4 as backing coat etc complete all as specified and as directed by Engr-in-Charge.
Material and labour Vitrified ceramic tiles 10mm thick (square/rectangular) area of each tile exceeding 0.42 sqm but not exceeding 1.00 sqm, (Digital full nano polish/ VC vitrified) in floors/ wall etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including 20mm thick screed bed in CM 1:4 complete all as specified and as directed by Engr-in-Charge.
All as per item No. 34 above but as in skirting including 10mm thick rendering in CM. 1:4 as backing coat etc complete all as specified and as directed by Engr-in-Charge.
Material and labour for Non skid coloured ceramic tiles 7 to 8 mm thick ( square/ rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of the tiles with and including 15mm thick screed bed in CM 1:4 complete all as specified and as directed by Engr-in-Charge.
Material and labour for Coloured glazed ceramic tiles in vertical surface 450X350X7mm thick with and including 10 mm thick cm (1:4) backing coat and Triangular filliting at top of skirting, set and jointed in neat cement paste and pointed in coloured cement to match the shade of the tiles complete all as specified and as directed by Engr-in-Charge.
Material and labour for 20-25mm thick, machine cut, Kota stone slab, as in floors, steps, landing etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of slab, including cutting, polishing etc. with and including 20mm thick screed bed in CM 1:4 complete all as specified and as directed by Engr-in-Charge.
Material and labour for Hard wear stone (of any type) granite stone slab 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types and including 15mm thick screed bed in CM 1:4 complete all as specified and as directed by Engr-in-Charge.
Material and labour for Hard wear stone 20mm thick (of any type) granite stone slab machine cut in skirting/dado laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing of type and including 10 mm thick backing coat in CM 1:3 complete all as specified and as directed by Engr-in-Charge.
Supply and fixing false ceiling with powder coated exposed GI grid suspension system (E-Grid T-2430 or equvalent load carrying capacity with mid span deflection not exc. 1/360 span with hanger spacing of 1200mm c/c) consisting of main runner 3600mm long, cross Tee 1200mm/600mm long and wall angle. The main runners to be placed @ 1200mm, the cross Tee 1200mm will be inserted in the pre cut slots of main runner at a regular interval of 600mm to form a modular grid of 1200mmX600mm. Additional cross Tees of 600mm shall be placed perpendicular to the cross tee 1200mm long to finally form a grid of 600mmX600mm. Grid of modular size 600mmX600mm shall be supported by 6 mm dia G.I. wire from purlins/soffit with and including 6mm thick high pressure steam cured non asbestos fiber cement designer ceiling board (Density>1200Kg/Cum) of size 595mmX595mm, confirming IS 14862 & Type B Category III of ISO 8336, tested as per AS 1530 part 3 & BS-476 Part 4, 5, 6, 7 & 8, complete all as per manufacturer's instruction.
Errection & dismantling of MS tubular double scaffolding (H frames) upto ht of 30 m & with necessary brassing, provision of necessary safety equipment to the skilled workers to carry out the work and covering with green cloth for carring out external facework of walls all as directed by Engr-in-Charge.
Material and labour for RCC Type B1 1:2:4 using 20 mm graded stone aggregate slab supported on wall, beam and coulumn, roof, landings, balconies, canopies, deck slabs and in shelves and the like including all necessary form work complete all as specified and as directed by Engr-in-Charge.
Material and labour for TMT mild steel bars,10 mm dia and over, cut to length bent to shape required, including cranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by Engr-in-Charge.
All as per item No. 44 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders.
Supply and fixing for rolled mild steel Sections of Grade Fe 410-W, (Gde- E-250) quality-A, as in post, runners, rafters, purlins, trusses, steps etc fixed with connecting plates including bending, welding etc complete all as specified and as directed by Engr-in-Charge.
Supply and fixing for mild steel plates of Grade Fe 410-W, (Gde- E-250) quality-A as in connecting pletes, base plate etc. welding etc complete all as specified and directed
Supply and fixing pre-painted galvalume aluminium zinc coating GI baseds corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
All as per item No. 48 above but plain galvalume sheets for ridges/ Flashings.
Material and labour for 1.5 mm thick galvanised steel sheet as in Valley gutters fixed with rivets or other suitable arrangements over MS brackets Trapezoidal shape of required profile with desired slope etc complete all as specified and as directed by Engr-in-Charge.
Supply and fixing 15 mm dia medium grade galvanized steel tubing with all fittings fixed to walls, ceilings or laid under floors complete all as specified and as directed by Engr-in-Charge.
All As per item No. 51 above but 20mm dia medium grade GI Pipe
Supply and fixing white vitreous china squatting pan, 'orissa' pattern, water closet of size 580x440mm with integral foot rest, P/S trap etc, fixed in repair complete all as specified complete all as specified and as directed.
Supply and fixing white vitreous china washed down water closet pan, (pedestal pattern), white, with and including P/S Trap, PVC solid type seat cover etc, fixed in repair complete all as specified and as directed by Engr-in-Charge.
Supply and fixing vitreous china urinals,half stall type, flat back, white, with grating and union for discharge pipe, complete including providing and fixing plugs, bedding urinal against wall in CM 1: 2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement , fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe.(Exclusive of fixing supply pipe to flushing cistern , trap and waste pipe).
Supply and fixing white glazed earthen ware vitreous china wash hand basin of size 550x400mm with and including CI brackets, 32mm bore brass CP waste coupling Inlet/ outlet PVC flexible pipe etc complete all as specified and as directed by Engr-in-Charge.
Supply and fixing 10 litres capacity PVC low level flushing cistern of approved make including ball valve,syphon set, inlet and outlet pipe, brackets etc. complete all as specified and as directed by Engr-in-Charge.
Supply and fixing 15 mm bore dia of pipe, brass chromium plated fancy type bib tap fixed in repairs complete all as specified and as directed by Engr-in-Charge.
Supply and fixing in repairs 15mm size Stop Valves fancy type chromium plated screwed down high pressure with crutch or butterfly handle handle screwed both ends
Supply and fixing in repair 15 mm dia fancy type pillar tap cast copper alloy with capston heads chromium plated screwed down high pressure with or without hot or cold with long screws shanks and fly nuts screwed for iron pipes acomplete all as specified and as directed by Engr-in-Charge.
Supply and fixing PVC Connections 15mm size with PTMT nuts of length 600mm complete all as specified and as directed by Engr-in-Charge.
Supply and fixing brass chromium plated shower rose 125mm size, fixed in repairs complete all as specified and as directed by Engr-in-Charge.
Supply and fixing chromium plated, tubular towel rail 20mm dia, D type, 60 cm long between flange, fixed in repairs complete all as specified and as directed by Engr-in-Charge.
Supply and fixing Soap dish, vitreous china white, approximat size 160X160X90mm fixed in repairs complete all as specified and as directed by Engr-in-Charge.
Supply and fixing 160mm dia PVC ( SWR) grade pipes single socketed in any length with rubber ring joints fixed to walls with and including fixing clips, bends, elbow, shoes bends etc. (Note:- Measurment shall be taken along the centre line of the pipes.)
Supply and fixing 110mm dia PVC ( SWR) grade pipes, single socketed in any length with rubber ring joints fixed to walls and laid in flloors/trenches complete all as specified and as directed by Engr-in-Charge.
Material and labour for rendering 15 mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finishing the surface fair and even including taking down cement plaster complete all as specified and as directed by Engr-in-Charge.
Material and labour for preparation of newly plastered surfaces of wall, applying two coats of oil emlusion distemper over a coat wall care putty of 3mm thick and alkali primer complete all as specified and as directed by Engr-in-Charge.
Material and labour for complete removal of existing treatment on wall surfaces and applying a coat wall care putty 3mm thick on plastered surfaces, preparatory to distempering and applying two coats of oil bound distemper over a coat of wall primercomplete all as specified and as directed by Engr-in-Charge.
Material and labour for rendering 5 mm thick in CM 1:3 on fair faces of brick work or concrete surfaces in ceiling finishing the surface even and smooth including taking dwon cement plaster complete all as specified and as directed by Engr-in-Charge.
Material and labour for preparation of newly plastered surfaces in ceiling , applying three coats of white wash complete all as specified and as directed by Engr-in-Charge.
Material and labour for complete removal of existing treatment in ceiling surfaces and applying three coats of white wash complete all as specified and as directed by Engr-in-Charge.
Material and labour for plastering in CM 1:4, 20 mm thick in two coats (15 mm under coat plus 5mm finishing coat) using Pidiproof LW+ water proofing chemical of Dr. Fixit or equvalent as per manufacturer's instruction and finishing the surface seven and fair including taking down cement plaster complete all as specified and as directed by Engr-in-Charge. (Water Proofing Chemical shall be measured and paid seperately)
Material and labour for preparation of newly plastered or un plastered wall surfaces, over 10cm girth, applying two coats of 100% acrylic, weather resistant emlusion over a coat of exterior wall primer complete all as specified and as per manufacturer's instruction complete all as specified and as directed by Engr-in-Charge.
Material and labour complete removal of existing plastered wall surfaces, over 10cm girth, preparation of surfaces, applying two coats of 100% acrylic, weather resistant emlusion over a coat of exterior wall primer complete all as specified and as per manufacturer's instruction complete all as specified and as directed by Engr-in-Charge.
Material and labour for preparation of new steel surfaces exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by Engr-in-Charge.
Material and labour for preparation of new steel surfaces exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by Engr-in-Charge.
Anil Industrial Corporation
Nilesh Construction
RAJENDRA CONSTRUCTION
PRABHU ASSOCIATES
ROHIT CONSTRUCTION
Garima Construction Co
SUNRISE CONSTRUCTION CO
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .