TTPS-ICHP- Reconditioning of tail pulley and tail snub pulley by providing necessary shaft, end disc, hub, stiffeners and keys for Conveyor-26A 25B

Amount

Charges for Loading & transporting pulley from Central stores/TTPS to private work shop for reconditioning and transporting back the finished pulley and retrieved scraps to central stores and including T&P hire charges & cost of consumables etc, complete.

Charges for cutting and removal of worn out outer shell and end plates 2 Nos from the pulley by using cutting gas without damaging the shaft and hub and including T&P hire charges and cost of consumable etc.,

Charges for sizing of new MS plate by cutting machine and rolling to the required size. Cutting & sizing and including T&P hire charges and cost of consumable etc.,

Charges for turning the shell width and machining to required dimension on the lathe and including T&P hire charges and cost of consumable etc.,

Charges towards fabrication of new end disc to correct dimension by cutting the M.S. plate 25mm thick and machining the M.S. plate to get good surface finish two numbers and including T&P hire charges and cost of consumable etc.,

Charges for loading centering and machining of new 2 Nos end disc to correct dimension and including T&P hire charges and cost of consumable etc.,

Charges for loading the New EN8 shaft on the lathe and machining full length of the shaft for trueness checking-turning and step turning with micro finishing to suit plumber block seating area and hub seating area and including T&P hire charges and cost of consumable etc.,

Charges for loading the shaft in the slotting machine and forming key ways in three different locations and including T&P hire charges and cost of consumable etc.,

Charges for fabrication and machining of 2 nos new hubs to suit the end disc and the shaft locations and including T&P hire charges and cost of consumable etc.,

Charges for Fabrication and machining of 2 Nos Key as per required dimensions and including T&P hire charges and cost of consumable etc.,

Charges for Fabrication of reinforcement frame by using 16mm thick M.S. plate to provide centre of the pulley. Machine the frame on both inner and outer side to position the same on outer dia of shaft and inner dia of shell. Fitting and welding the frame on inside the pulley and including T&P hire charges and cost of consumable etc.,

Charges for Assembling of all the items of pulley, both hubs hot oil bathed and fitted in the shaft in hot condition and including T&P hire charges and cost of consumable etc.,

Charges for Welding works in pulley, shell end disc and stiffeners and shell & hub etc and including T&P hire charges and cost of consumable etc.,

Charges for Pulley Stress relieving and static balancing and check up.

Charges for reconditioning of tail pulley and tail snub pulley by providing necessary shaft end disc, hub, stiffeners and keys for Conveyoer-26A for MS material.

Charges for reconditioning of tail pulley and tail snub pulley by providing necessary shaft, end disc, hub, stiffeners and keys for Conveyor-25B for M.S Material

VEL ENGINEERING