Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹23.2 LAccepted-AOC BHANDARI NIWAS BHARAT NAGAR TEH DISTT PATHANKOT PIN 145023 | PATHANKOT | PATHANKOT | PUNJAB | 145023 | ₹23.2 L | L1 | Accepted-AOC Being L1 |
| 2 | L2₹25.9 L+₹2.7 L (11.5%)Rejected-Finance | ₹25.9 L+₹2.7 L (11.5%) | L2 | Rejected-Finance Other than L1 |
| 3 | L3₹26.7 L+₹3.5 L (15.1%)Rejected-Finance 99 MODEL TOWN PATHANKOT 145001 | PATHANKOT | PATHANKOT | PUNJAB | 145001 | ₹26.7 L+₹3.5 L (15.1%) | L3 | Rejected-Finance Other than L1 |
| 4 | L4₹31.3 L+₹8.1 L (35.0%)Rejected-Finance 1ST FLOOR GURJEET MARKET DHANGU ROAD | ₹31.3 L+₹8.1 L (35.0%) | L4 | Rejected-Finance Other than L1 |
| 5 | L5₹31.8 L+₹8.6 L (36.9%)Rejected-Finance | ₹31.8 L+₹8.6 L (36.9%) | L5 | Rejected-Finance Other than L1 |
| Sl No | Description | Qty | Unit | Vijay Kumar Contractor and Engineers L4 | M/S V K TRADERS L2 | M/S NAVEEN PATHANIA L6 | satpal and brothers L3 | M/S P.S CONSTRUCTION CO L5 | M/s GIrdhari Lal Rakesh Kumar L1 |
|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Taking down cement plaster on brick or stone walls any description etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified & directed by Engineer-in-Charge. | 1,100 | Sqm | 15 ₹16,500 | 10 ₹11,000 | 30 ₹33,000 | 5 ₹5,500 Lowest | 30 ₹33,000 | 33 ₹36,300 |
| 2.00 | Material and labour 10 mm thick rendring in cement mortor (1:6) on brick or concrete surfaces and finished even and smooth without using extra cement complete all as specified & directed by Engineer-in-Charge. | 500 | Sqm | 290 ₹1,45,000 | 160 ₹80,000 | 220 ₹1,10,000 | 100 ₹50,000 Lowest | 300 ₹1,50,000 | 135 ₹67,500 |
| 3.00 | Material and labour for rendering 15mm thick in cement mortar 1:4 mixed with liquid water proofing compound (as per manufacturer’s instructions) on fair faces of brick work ,concrete surface of wall, fin, facia, chajjas, parapet and similar article finished surface even and smooth without using extra cement including necessary scaffolding up to four storeys height of bldgs if required complete all as specified & directed by Engineer-in-Charge.
Note:- WPC shall be measured and paid separately. | 600 | Sqm | 450 ₹2,70,000 | 170 ₹1,02,000 | 340 ₹2,04,000 | 120 ₹72,000 Lowest | 375 ₹2,25,000 | 135 ₹81,000 |
| 4.00 | Supply only Liquid Water Proofing Compound complete all as specified & directed by Engineer-in-Charge. | 4 | Ltr | 250 ₹1,000 | 90 ₹360 Lowest | 500 ₹2,000 | 143 ₹572 | 300 ₹1,200 | 111 ₹444 |
| 5.00 | Material and labour for rendering or plastering work 10 mm thick in cement mortar 1:3 in facia or edging of chajjas, ceilling etc, including roughening old concrete surface and making the line in true shape and finishing the surface without using extra cement including necessary scaffolding up to two storeys height of bldgs if required complete all as specified & directed by Engineer-in-Charge. | 200 | Sqm | 600 ₹1,20,000 | 175 ₹35,000 | 400 ₹80,000 | 130 ₹26,000 Lowest | 375 ₹75,000 | 333 ₹66,600 |
| 6.00 | Material and labour for preparation of surfaces of wall and applying 2mm thick wall care putty making the surface smooth complete all as specified & directed by Engineer-in-Charge. | 1,100 | Sqm | 30 ₹33,000 Lowest | 40 ₹44,000 | 80 ₹88,000 | 55 ₹60,500 | 70 ₹77,000 | 33 ₹36,300 |
| 7.00 | Material and labour for preparation of new surfaces of wall and applying two coats of oil bound distemper using auto paint roller over one coat of chalk white primer on wall surfaces including necessary scaffolding up to two storeys height of bldgs if required complete all as specified & directed by Engineer-in-Charge. | 500 | Sqm | 40 ₹20,000 | 20 ₹10,000 | 40 ₹20,000 | 10 ₹5,000 Lowest | 40 ₹20,000 | 23 ₹11,500 |
| 8.00 | Material and labour for preparation of new surface of wall and applying Two or more coats of weather proof acrylic exterior emulsion paint (upto 12 mtr height) as approved of any shade/colour in camouflage pattern over a coat of primer as per manufacture instruction using auto paint roller & making good surface including necessary scaffolding up to four storeys height of bldgs if required complete all as specified & directed by Engineer-in-Charge. | 600 | Sqm | 70 ₹42,000 | 40 ₹24,000 | 100 ₹60,000 | 20 ₹12,000 Lowest | 45 ₹27,000 | 33 ₹19,800 |
| 9.00 | Material and labour for preparation of new plastered surfaces of wall and applying three coats of white wash complete all as specified & directed by Engineer-in-Charge. | 100 | Sqm | 15 ₹1,500 | 10 ₹1,000 Lowest | 40 ₹4,000 | 10 ₹1,000 Lowest | 25 ₹2,500 | 11 ₹1,100 |
| 10.00 | Material and labour for preparation of old decorated plastered or unplastered surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soots, moulds and efforescents salts and trading oil and greasy spots including cornices washing down etc with clean water and applying one coat of white wash including removing nails etc using auto paint roller & making good surface disturbed complete all as specified & directed by Engineer-in-Charge. | 200 | Sqm | 10 ₹2,000 | 5 ₹1,000 Lowest | 40 ₹8,000 | 10 ₹2,000 | 20 ₹4,000 | 11 ₹2,200 |
Tender Value
₹35 L
EMD Value
₹70,000
Closing Date
7 Aug 2025, 6:00 pmClosed
Sh Mahajan Singh
GE (AF) Pathankot
REPAIR TO FLOORING PLASTERING PLUMBING SANITARY FITTINGS CHEQUERED TILES INTERLOCKING TILES IN SMQ OTM BLDGS DSC QTRS ETC IN NO 02 AND 03 AREA DOMESTIC AT AIR FORCE STATION PATHANKOT
2025_MES_719542_1
GE/PAF-41/2025-26
Open Tender
Civil Works
Item Rate
180 days
GE (AF) Pathankot
As per NIT
8 documents required · 8 mandatory
₹500
Yes
GE (AF) Pathankot
₹70,000
Yes
11 Oct 2025
10 Jul 2025
9 Aug 2025
10 Jul 2025
7 Aug 2025
24 Jul 2025
Amount
Taking down cement plaster on brick or stone walls any description etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified & directed by Engineer-in-Charge.
Material and labour 10 mm thick rendring in cement mortor (1:6) on brick or concrete surfaces and finished even and smooth without using extra cement complete all as specified & directed by Engineer-in-Charge.
Material and labour for rendering 15mm thick in cement mortar 1:4 mixed with liquid water proofing compound (as per manufacturer’s instructions) on fair faces of brick work ,concrete surface of wall, fin, facia, chajjas, parapet and similar article finished surface even and smooth without using extra cement including necessary scaffolding up to four storeys height of bldgs if required complete all as specified & directed by Engineer-in-Charge. Note:- WPC shall be measured and paid separately.
Supply only Liquid Water Proofing Compound complete all as specified & directed by Engineer-in-Charge.
Material and labour for rendering or plastering work 10 mm thick in cement mortar 1:3 in facia or edging of chajjas, ceilling etc, including roughening old concrete surface and making the line in true shape and finishing the surface without using extra cement including necessary scaffolding up to two storeys height of bldgs if required complete all as specified & directed by Engineer-in-Charge.
Material and labour for preparation of surfaces of wall and applying 2mm thick wall care putty making the surface smooth complete all as specified & directed by Engineer-in-Charge.
Material and labour for preparation of new surfaces of wall and applying two coats of oil bound distemper using auto paint roller over one coat of chalk white primer on wall surfaces including necessary scaffolding up to two storeys height of bldgs if required complete all as specified & directed by Engineer-in-Charge.
Material and labour for preparation of new surface of wall and applying Two or more coats of weather proof acrylic exterior emulsion paint (upto 12 mtr height) as approved of any shade/colour in camouflage pattern over a coat of primer as per manufacture instruction using auto paint roller & making good surface including necessary scaffolding up to four storeys height of bldgs if required complete all as specified & directed by Engineer-in-Charge.
Material and labour for preparation of new plastered surfaces of wall and applying three coats of white wash complete all as specified & directed by Engineer-in-Charge.
Material and labour for preparation of old decorated plastered or unplastered surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soots, moulds and efforescents salts and trading oil and greasy spots including cornices washing down etc with clean water and applying one coat of white wash including removing nails etc using auto paint roller & making good surface disturbed complete all as specified & directed by Engineer-in-Charge.
Material and labour for three coats of white wash on newly plaster surface of ceilings including preparation of surface complete all as specified & directed by Engineer-in-Charge.
Material and labour for preparation of old decorated plastered or unplastered surfaces of ceilings by brooming down or steel wire brushing, scrapping down smoke soots, moulds and efforescents salts and trading oil and greasy spots including cornices washing down etc with clean water and applying one coat of white wash including removing nails etc using auto paint roller & making good disturbed surface complete all as specified & directed by Engineer-in-Charge.
Dismantling of floor, hearth or wall tilling, any type flooring including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified & directed by Engineer-in-Charge.
Material and labour for non skid coloured Ceramic tiles 07mm to 08mm thick (square/ rectangular) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified & directed by Engineer-in-Charge. Note:-The texture ,colour ,Shade of tiles & laying of tiles to any pattern & any design with one or more colours shall be approved by GE and Rates also included in this item for necessary raking circular cutting or notching and waste on tiles.
Supply and fix joint free non skid coloured Ceramic tiles 07-08 mm thick (square/ rectangular) area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified & directed by Engineer-in-Charge. Note:-The texture ,colour ,Shade of tiles & laying of tiles to any pattern & any design with one or more colours shall be approved by GE and Rates also included in this item for necessary raking circular cutting or notching and waste on tiles.
Material and labour for coloured Glazed ceramic tiles in vertical surface such as skirting, dado, riser to step etc 450mmX 350mmX 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of the tiles over and including 10mm thick rough cement plaster to receive tiles in cement mortar 1:4 complete all as specified & directed by Engineer-in-Charge. Note:-The texture ,colour ,Shade of tiles & laying of tiles to any pattern & any design with one or more colours shall be approved by GE and Rates also included in this item for necessary raking circular cutting or notching and waste on tiles.
Material and labour 20mm thick granite (pure black) work (table rubbed and polished) in steps, jambs pillars, window cills ,cooking platform and like including pointing in white cement (1:2) using marble dust with admixture of pigments to match with shade or granite over including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified & directed by Engineer-in-Charge. Note:- The stone slab shall be in one piece over kitchen plateform,window cill and making gas pipe holes 25mm dia with rounded holes and all open edges to be half rounded.
Material and labour for 50mm thick Cement concrete type B-1, 1:2:4 (20mm graded crushed stone aggregate) as in floors finished even and smooth with using extra cement complete all as specified & directed by Engineer-in-Charge.
Material and labour for taking down and refixing the shutters of any description exc 1 sqm but not exc 2 sqm in same or other opening after repair, easing and adjusting or resecuring complete all as specified & directed by Engineer-in-Charge.
Material and labour for 12mm thick full body vitrified single piece tiles (homogeneous) for stairs with anti skid property and having self embossed grooves (for tread portion) and its skirting in single colour set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles over and including 10mm thick rough cement plaster to receive tiles in cement mortar 1:4 complete all as specified and as directed. Note:-The texture ,colour ,Shade of tiles & laying of tiles to any pattern & any design with one or more colours shall be approved by GE and Rates also included in this item for necessary raking circular cutting or notching and waste on tiles complete all as specified & directed by Engineer-in-Charge.
Material and labour for 60 mm thick machine pressed precast concrete interlocking paver block any shape and size confirming to M-40 Grade with rubber moulded glossy finish complete all as specified & directed by Engineer-in-Charge.
Material and labour for 80 mm thick machine pressed precast concrete interlocking paver block any shape and size confirming to M-40 Grade with rubber moulded glossy finish complete all as specified & directed by Engineer-in-Charge.
Material and labour for Chequered cement concrete tiles rubber moulded as per sample kept In GE Office 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in cement mortar (1:4) floors with white cement and pigment complete all as specified & directed by Engineer-in-Charge.
Material and labour for sand filling under floors, (paver blocks) of required thickness n.exc 50 mm thick, spreading and levelling complete all as specified & directed by Engineer-in-Charge.
Material and labour for 75mm thick PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in sub base of flooring to recive pavers complete all as specified & directed by Engineer-in-Charge.
Material and labour for PCC 1:2:4 Type B-1 (usingh 20mm graded crushed stone aggregate) as in rounded or chamfered on edges or in coping to top of brick work in any description or other similar works including necessary form work complete all as specified & directed by Engineer-in-Charge.
Supply and fixing for water proofing treatment to sunken protion of WC 's, bathroom etc by applying cement slurry mixed with acrylic based polymer modified cementitious composite compound coating of approved make complete all as specified & directed by Engineer-in-Charge, comprising of following:- (a) Demolition and removing lean concrete/red najri/moorum (b) Cleaning the surface and 15mm thick plaster in cement mortar (1:4) using water proofing compound @ 3% by weight of cement on the floor and side of wall of sunken portion and finishedthe surface even &smooth using extra cement complete (c) First layer of slurry of cement @0.488kg/Sqm mixed with acrylic based polymer modified cementitious composite compound @0.253Kg/Sqm after curing of 4 hour (d) Second layer of cement slurry of cement 0.242 Kg/Sqm mixed with acrylic based polymer modified cementitious complete compound @0,126Kg/Sqm after curing of 4 hours followed with curing of 48 hours (e) After treatment of surface sunken portion to be tested for water tightness any leakage or seepage is observed same to rectify before filling the sunken postion (f) Supply and fixing for providing lean concreate (1;5:10) type E-2 (using 40mm graded crushed stone aggregate) in sunken filling
Supply and fixing in repair 75 mm bore PVC pipes ISI marked in any length with or without ears laid in floor complete all as specified & directed by Engineer-in-Charge.
Supply and fixing in repair PVC floor trap 75 mm with anti cocroach grating, with or without hole including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 with CP grating complete all as specified & directed by Engineer-in-Charge.
Supply and fixing in repair 75mm dia PVC bends/hill rest bends (any radius) diminishing pieces or tapers (larger bore measured complete all as specified & directed by Engineer-in-Charge.
Taking down eaves gutters and rainwater pipes 100 mm dia (any size or pattern) , including all fitting ,head ,shoes ,bend, swan-nacks etc., including cleaning or refixing or removal to store complete all as specified & directed by Engineer-in-Charge.
Supply and fixing PVC(SWR) pipes 110mm bore, single socketd , in any length with rubber ring joints , in any length fixed to walls complete all as specified & directed by Engineer-in-Charge.
Supply and fixing PVC (SWR) bend with ovel accessed door any radius 110mm dia bore complete all as specified & directed by Engineer-in-Charge.
Supply and fixing PVC (SWR) vent cowl 110mm dia bore complete all as specified & directed by Engineer-in-Charge.
Material and labour taking down 15 mm bore GI tubing ,fitting and connections etc complete all as specified & directed by Engineer-in-Charge.
Material and labour taking down 20 mm bore GI tubing ,fitting and connections etc complete all as specified & directed by Engineer-in-Charge.
Refixing of old steel tubing 15/20 mm medium grade galvanized ISI marked with all fittings short pieces and fixed complete all as specified & directed by Engineer-in-Charge.
Supply and fixing 15 mm bore CPVC pipes ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling complete all as specified & directed by Engineer-in-Charge.
Supply and fixing 20 mm bore CPVC pipes ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling complete all as specified & directed by Engineer-in-Charge.
Supplied and fixed Rotational moulded polyethlene water storage tanks three layers of 500 ltrs capacity ISI marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including 20mm thick Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210 gms including Dismantling of old brocken PVC/RCC/Iron water tanks, outlet & over flow pipe etc complete all as specified & directed by Engineer-in-Charge.
Supplied and fixed Rotational moulded polyethlene water storage tanks three layers of 1000 ltrs capacity ISI marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including 20mm thick Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210 gms including Dismantling of old brocken PVC/RCC/Iron water tanks, outlet & over flow pipe etc complete all as specified & directed by Engineer-in-Charge.
Supply and fixing in repair Vitreous china wash down water closet pan pedestal pattern, white (excluding supply of flushing cistern) including flush pipes, CP jet with flexible pipe including making connections to trap, and to flush pipe including plastec seatcover closed pattern with stainless steel or aluminised hinging device complete all as specified & directed by Engineer-in-Charge.
Supply and fixing in repair PVC flushing cistern 10 ltr capacity incl PVC connection inlet and and outlet connections,brackets, PVC pipe with bend 32 mm dia of suitable length including making necessary connections to water supply pipe line and jointing to WC complete all as specified & directed by Engineer-in-Charge.
Supply and fixing in repairs Vitreous China wash basin, white, flat back, size 450x300mm including brackets, 32 mm bore CP waste pipe long screw thread and 32 mm dia flexible waste pipe complete all as specified & directed by Engineer-in-Charge.
Supply and fixing fancy type long body Bib taps for 15 mm bore pipe, cast copper alloy chromium plated complete all as specified & directed by Engineer-in-Charge.
Supply and fix for in repairs CP Swan neck pillar taps fancy type 15 mm bore, cast copper alloy, with capstan heads screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shankSupply and fixingly-nuts, screwed for iron pipe complete all as specified & directed by Engineer-in-Charge.
Supply and fixing in repair fancy type angular Stop cock/angle cock 15mm bore pipe ,CP cast copper alloy complete all as specified & directed by Engineer-in-Charge.
Supplied and fixed in repairs Brass CP shower rose 125mm size including fixing to steel pipe or union complete all as specified & directed by Engineer-in-Charge.
Supply and fixing in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified & directed by Engineer-in-Charge.
Supply and fixing in repair Stop valve concealed type cast copper alloy (ISI Markd) fancy type, chromium plated with long shank and cup screwed down high pressure with capstan head screwed both ends for iron pipe 15mm bore dia complete all as specified & directed by Engineer-in-Charge.
Supply and fixing in repairs CP soap dish fixed to walls with chromium plated (CP) brass screws complete all as specified & directed by Engineer-in-Charge.
Fixing only in repairs sanitary fittings including WC, Wash hand basin, wall Mixtures/centerhole mixtures of any type, Stop vaives, shower rose, bib taps etc into same or other opening including necessary stainless steel fittings complete all as specified & directed by Engineer-in-Charge.
M/S V K TRADERS (BID ID -3378760)
satpal and brothers (BID ID -3385754)
Vijay Kumar Contractor and Engineers (BID ID -3375866)
M/S P.S CONSTRUCTION CO (BID ID -3376984)
M/S NAVEEN PATHANIA (BID ID -3378891)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .