REPAIR REPALCEMENT OF SUBMAIN WIRING DBs INCLUDING MCBs MCCB LED LIGHT FITTINGS IN COMMON AREA AT AREA OF AGE BR I BR II EM OF GE WEST DELHI CANTT 10

Amount

Taking down carefully copper/aluminium any type of point wiring (light/fan/socket/power) complete (fittings such as switches, ceiling roses, holders, sockets, light fittings) and making good the disturbed surfaces of wall/floors/ceiling etc) complete all as specfied & directed.

M&L for point wiring with 3 x1.5 sqmm (nominal area) FRLS PVC insulated unsheathed copper conductor cable ( phase, neutral and earth wire ) in and including PVC concealed conduit ISI marked of suitable size medium grade with PVC conduit fittings such as tees,bends, elbow,redcers including cutting chasing and making good to the disturbed surface as per existing, earth wire connected to comman earth dolly with and including pressed steel sheet metal sunken box of suitable size for fixing switches/ sockets etc with cover plate 3 mm thick plastic laminated sheet for one light /fan /exhaust fan/ circulator fan/ bell /buzzer controlled by one way switch complete all as specified and directed :

(a) One light/fan/bell point controlled by one way switch 5 amps.

(b) One two way point controlled by 2 way switch 5 amps.

All as per item 2 but in existing concealed/open PVC/steel conduits, concealed sunken CI/pressed steel terminal boxes for the following :-

(a) One light/fan/bell point controlled by one way switch 5 amps.

(b) One two way point controlled by 2 way switch 5 amps.

S&F switch piano flush button type 5 amps single pole one way complete all as specified and directed.

S&F switch piano flush button type 5 amps single pole two way complete all as specified and directed.

S&F ceiling rose 3 phase/PVC/polycarbonate isolated body complete all as specified and directed.

S&F basic all purpose surface and wall mounting LED batten with Aluminium housing & integrated electric driver 20 watt LED fitting of 4 ft length connected with 23/.0076 twin core PVC flexible cable complete all as specified and directed.

Supply, laying and drawing in and including 20 mm dia concealed PVC rigid conduits including cutting of chases for laying conduit making good the disturbed surfaces as per existing surfaces or as directed 03 runs of IC x 6.00 sqmm (Main,neutral and earth wire) of stranded copper conductor PVC insulated unsheathed cables of 1100 volts grade conforing to IS : 694 of 1990 complete including connection and taking out old submain wiring all as specified and directed

Supply, laying and drawing in existing concealed /open conduits as directed on walls 03 runs of IC x 6.00 sqmm (Main,neutral and earth wire) of stranded copper conductor PVC insulated unsheathed cables of 1100 volts grade conforing to IS : 694 of 1990 complete including connection and taking out old submain wiring all as specified and directed.

S&F in repair of factory made epoxy polyester powder coated distribution board SP & N, 8 way fabricated from minimum 1.2 mm thick CRCA sheet, double door (IP-43 protection) fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, Neutral bar, standard DIN rail, eath bar and cable ties for cable management, top and bottom removable gland plates with knockouts and suitable for one DP MCB as incomer and 6 SP MCBs as outgoings conforming to IS: 8623 alongwith cable end box for DB all as specified and directed. Make: Legrand Catpart No:507611 or equivalent as approved. NOTE: (a) MCBs shall be measured and paid separately. (b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of Sch.

S&F in factory made epoxy polyester powder coated distribution board TP&N 4 way (VTPN MCCB DB) with metal double door (IP-43 protection) fabricated from minimum 1.6 mm thick CRCA sheet and fixed on wall and suitable for universal mounting and including 200 Amps copper bus bar, Neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with provn for DPX 125, 4 pole MCCB and ELM as incommer and MCBs outgoings complete all as specified and conforming to IS: 8623 along with cable end box for above DB including taking down old DBs all as specified NOTE :- (a) MCBs shall be measured and paid separately. (b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of Sch.

S&F single pole MCB 6 to 32 Amps, 240 v, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for ‘B’ curve, 10 KA breaking capacity complete conforming to IS 8828 of 1996 i complete all as specified and directed

S&F double pole MCB 40 amp, 415V, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for ‘B’ curve, 10 KA breaking capacity, complete all as specified and directed.

S&F in repair Building LED security light fitting 25 W new generation energy saving and environmental friendly long life LED as lighting source and lens embedded PC cover having TOP Opening seperate driver compartment with IP 65 protection and impact resistance of IK 07,25W LED 5700K, luminaire along with a bracket of GI pipe suitable of size NBV having approx length of 1.5 M bent to shape and fixed to the wall with clamps,nut bolts etc of approsimate, size complete all as specified and directed.

S&F MCCB 100 Amp 4 pole 16 KA at 415 V with fixed thermal megnatic release complete all as specified directed.

Deduct Credit: for demolished/dismantled material of (-) Rs 203048.00 (Minus) as listed in Schedule 'A' Part II (Credit Schedule) Note: Tenderer's shall not quote against this item. The amount of Credit Schedule is tentative, however the same shall be considered to arrive at the contract sum

M/s S.G. BUILDERS

SETHI ENTERPRISES

M/s Adhikari construction co.

M/S ANIL KUMAR

Vishal Enterprises

SANJEEV ENTERPRISES

M/S BEE ESS ENTERPRISES

jain associates