Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹15.0 LAccepted-AOC | L1 | Accepted-AOC L1 Bidder | |
| 2 | L2₹16.0 L+₹1.0 L (6.69%)Rejected-Finance 63 BAJMASTA RAMBAN | RAMBAN | RAMBAN | JAMMU AND KASHMIR | L2 | Rejected-Finance Being other than Lowest bidder | |
| 3 | L3₹16.6 L+₹1.7 L (11.2%)Rejected-Finance 146 D POCKET B MAYUR VIHAR PHASE II DELHI 110091 EAST DELHI 110091 | EAST | DELHI | 110091 | L3 | Rejected-Finance Being other than Lowest bidder |
Tender Value
₹16 L
EMD Value
₹32,000
Closing Date
17 May 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (I) 873 EWS
Garrison Engineer (Indep) 873 Engineer Works Section PIN 913 873 C/O 56 APO
PROVN OF 2 X STORE ROOMS(SIZE 10 X 3 MTR AND 6.5 X 4 MTR) FOR ASCON NODE AT PATNITOP UNDER GE (I) 873 EWS (2nd Call)
2022_MES_512379_2
NIT-60 of 21-22
Open Tender
Civil Works
Item Rate
210 days
Bhaderwah
As per NIT
7 documents required · 7 mandatory
₹500
GE (I) 873 EWS
₹32,000
Yes
25 Jun 2022
8 Apr 2022
20 May 2022
8 Apr 2022
17 May 2022
22 Apr 2022
60 days
Amount
Surface excavation not exceeding 30cm deep and averaging 15 cm deep and getting out in any type of soil, complete all as specified & directed.
Rough excavation not exceeding 1.5 m deep and getting out in any type of soil, complete all as specified and directed.
Excavating over areas not exceeding 1.5 m deep and getting out in any type of soil, complete all as specified and directed.
Excavation in trenches not exc. 1.5m wide and not exc. 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5m in depth in any type of soil and getting out, complete all as specified and as directed
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick any type of soil, complete all as specified and directed.
Removing excavated soils to a distance exceeding 50m but not exceeding 100m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.
Plain Cement concrete type E-2, 1:5:10 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete, complete all as specified and directed.
Plain Cement concrete type D-2, 1:4:8 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete, complete all as specified and directed.
Walling of random rubble stone masonry, well bonded, bedded and solidly hearted built in cement mortar 1:6, brought up to courses, complete all as specified and directed. Note : Volume of PCC bond stone provided in lieu of Stone measured under Srl item No. 13 here-in-after shall be deducted from total cumulative quantity of stone masonry.
Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6m mean radius built in in CM 1:6, complete all as specified and directed.
40mm thick Plain cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in Damp proof course to horizontal or vertical surfaces including necessary including weathering, slightly rounded or chamfered angles and throating and necessary form work complete, all as specified and as directed.
Plain cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in cills, lintels up to 1.5 metre clear span, steps, seismic and other similar band, plinth course, string courses, lacing courses, parapets and railing up to 60cm in height, copings, kneelers, apex stone, bed plates, kerbs etc and in similar works including weathering, slightly rounded or chamfered angles and throating and necessary form work complete, all as specified and as directed.
PCC 1:3:6 (nominal mix), type C-1 using 20mm graded crushed stone aggregate as in precast bond stones, set in cement mortar 1:6, complete all as specified & directed.
Extra over stone walling of granite, trap or basalt stone for hammer dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses with maximum depression on face from straight edge held against the dressed surface n exc 40mm, complete all as specified & directed.
Raised pointing to random or polygonal rubble, uncoursed or brought upto courses in cement mortar 1:4, complete all as specified.
PVC (SWR) pipes, 110mm dia, fixed to retaining wall as in weep hole, complete all as specified & directed.
Broken stone or boulders in hand packing (any thickness) at back of walls etc. and raising (or lowering) to the required level, complete all as specified.
RCC M-25, design mix, using 20mm graded crushed stone aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete, complete all as specified and as directed.
RCC M-25, design mix, using 20mm graded crushed stone aggregate as in columns, pillars, piers, posts and struts, complete all as specified and as directed.
RCC M-25 (design mix) in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed.
RCC M-25 (design mix) in chajja etc complete all as specified and as directed.
Formwork to sides of concrete foundation, footings, bases of columns, rafts and raft beams and similar work; vertical or to batter for rough finished surfaces of concrete, complete all as specified and as directed.
Formwork to sides of pillars, posts, struts, columns (square, circular rectangular on plan or polygonal etc. for rough finished surfaces of concrete, complete all as specified & directed.
Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for rough finished surfaces of concrete, complete all as specified & directed.
TMT bars 10mm dia and over, cut to length bent to shape required including cranking bending spirally for hooping of column, hooking ends including binding with MS annealed wire of dia not less than 0.90 mm, complete, all as specified and as directed.
TMT bars 6 to 8 mm dia, cut to length bent to shape required including cranking bending spirally for hooping of column, hooking ends including binding with MS annealed wire of dia not less than 0.90 mm, complete all as specified and as directed.
TMT bars 5 mm dia and over upto and including 10 mm dia as in stirrups, cut to length bent to shape including binding with MS annealed wire of dia not less than 0.90 mm, complete all as specified and as directed.
Rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement, complete all as specified.
Rendering 15mm thick in cement mortar 1:6 on stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing, finished even and smooth without using extra cement, complete all as specified.
Supply only Liquid water proofing compound all as specified and as directed.
Hard core of broken stone gauge exceeding 63mm and not exceeding 100mm deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surfaces, complete, all as specified and as directed.
75 mm thick plain cement concrete (1:3:6), type C-1 using 20mm graded stone aggregate as in plinth protection and laid in panels complete and finished the even & fair and providings joints through out the thickness of plinth protection filed with mastic filling comprising one part of 01 bitumen 85/25 grade and three part of sand by weight all as specified and directed.
75mm thick plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub base, complete all as specified and directed.
25mm thick plain cement concrete 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in sub base, complete all as specified and directed.
Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab, size of each slab not be less than 0.28 Square metre, including rubbing and mirror polishing complete over and including 20mm thick screed bed in CM 1:4, complete all as specified.
Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar over and including 10 mm thick cement plaster in cement mortar 1:3 as backing coat rough finished surface, and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing & complete all as specified & directed.
2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed, complete all as specified and as directed.
35mm thick 2nd class HW rail and style, plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, complete all as specified and as directed.
35mm thick 2nd class Hard wood (Sal/Hollock), glazed and skeleton shutters (factory made), open rebated and prepared to receive glass or gauge etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., size of members of shutters as specified in clause 8.24 (a) of SSR Part-I for door shutters, complete all as specified.
150mm thick plain cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in sub base, complete all as specified and directed.
Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment laid over and including 25mm thick sand cushioning, complete all as specified and directed
Steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay, complete with glazing bars, dovetailed or welded, complete all as specified and as directed.
Steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay, complete without glazing bars, dovetailed or welded, complete all as specified and as directed.
Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and or reveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290 grade-E-165, complete all as specified.
Stainless steel wire cloth 0.36 nominal dia of wire and average width of aparture 1.4mm and fixed with tinned tacks or galvanised wire staples for steel window and shutters , complete all as specified.
Sheet glass ordinary quality, 3mm thick, fitted with snap bedding rubber gasket/oil putty or woeeden beads in squares not exceeding 0.50 Square metre in each pane, complete all as specified.
Plain cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in bed blocks for hold fast including necessary form work complete, all as specified and as directed.
Mild steel work as in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required, hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165, complete all as specified.
100mm long Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, complete all as specified and directed.
Aluminium anodized barrel tower bolt of extruded section and fixed complete of Size 200mm long complete all as specified and directed.
Aluminium handle cast type anodized of size 150mm, complete all as specified and directed.
Small fittings such as bracket of any type, latch and hinge blocks, shaped door and window stops and the like including all necessary labour, article not exc. 200 cucm each of IInd class hard wood, complete all as specified.
300mm ordinary rat tail rod pattern door spring including roller and roller plate of mild steel, complete all as specified.
Mild steel rolled work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastening and heavy bracket framing (beam, tee, angle, square / rectangle sections, channel or flat section) including distance pieces, cleats etc. gusset plates confirming to grade Fe 410-W (Gde E-250) quality-A complete all as specified and directed.
Pre-painted galvalume aluminium zinc coating G.I based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering, fixed with self taping screws, complete all as specified and directed.
Pre-painted galvalume aluminium zinc coating G.I based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering / cladding to wall, fixed with self taping screws, complete all as specified and directed.
6mm thick Non asbestos fibre cement building boards fixed or laid in and including Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. suspended by and incl Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long, complete all as specified and directed.
Preparation new plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed.
Preparation new plastered surfaces of wall and applying two coats of oil bound distemper over a coat of chalk whitening over and including a coat of wall care putty (Birla/JK) of average thickness 2 to 3mm, complete all as specified and as directed.
Preparation of new steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint, over a coat of red oxide primer, complete all as specified and as directed.
Preparation of new wooden surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and as directed.
Point wiring with multi stranded copper conductor of size 1.5Sqmm PVC insulated unsheathed FRLS cable in and including concealed PVC conduit of wall thickness not less than 1.8mm and accessories of suitable size for concealed wiring including 1.50 Sqmm copper earth wire (green colour) FRLS Cable for one light point or fan point or bell point controlled by one No, one way switch using cable of different insulation colour for colour coding including 3mm thick laminated sheet cover, mild steel sheet or cast iron boxes including cutting chases and making good to disturbed surfaces of wall / floor, complete all as specified and as directed.
All as per the description of Serial Item No 62 here-in-before but for one 3/5 pin socket outlet 5 Amp on same board with other switches, complete all as specified and as directed.
All as per the description of Serial Item No 62 here-in-before but for one 3/5 pin socket outlet 5 Amp independent, complete all as specified and as directed.
All as per the description of Serial Item No 62 here-in-before but for one 3 pin socket outlet 15 Amp independent board using cable of size 2.5 Sqmm conduit all as specified and directed.
Switch piano flush type, 5A, 230Volt, complete all as specified and as directed.
Socket outlet, 5 pin 5A, 230 volt, complete all as specified and as directed.
Switch socket combination, 2 in 1, 5 pin 15A, flush type, 230 volt, complete all as specified and as directed.
Ceiling rose surface bakelite three terminals 240 volts complete all as specified and as directed.
Lamp holder PVC case body of Bakelite with back plate suitable for batten fittings complete all as specified and as directed.
LED Lamp 15 watts 230 volt in white colour complete all as specified and as directed. Make : Havells / Bajaj/Philips / Crompton / Syska
Wall surface mounted tube light fitting 18/20 watt LED with electronic driver and extrude aluminium heat sink integrated polycarbonate LED channel with white acrylic cover and including 1X18 watt LED tube rod and complete accessories , internally pre- wired including connection cable of copper conductor size 3-core ,23/0.0076 passing through PVC flexible conduit from ceiling rose to light fitting connector complete all as specified and as directed by Engineer-in-Charge. Make :- CROMPTON Cat No LCTL-18-CDL OR HAVELL's Cat No LHEXBLP7UN1W018 OR BAJAJ Cat No BLRBDB118
Bulk head luminaries complete with all accessories suitable for and including 1 x 10 Watts LED lamp including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230 Volts 50 Hz complete all as specified and as directed. Make : Havells Cat Part No LHEOAOP7UZ6W010 / Crompton Cat Part No LBHE-10-CDL
Exhaust fan, AC, SP 230/240V, 450mm sweep with louver, 1400 RPM complete with accessories complete provisioning of three core flexible copper cord of size 23/0.0076 of required length from connector to fan for connection, complete all as specified and as directed. Make : Havells / Bajaj / Usha / Crompton/ Khaitan.
Sheet metal enclosure factory made Double door for DB 240 volts with 200 Amps rated bus bar SPN 4 Way, complete all as specified and as directed.
Sheet metal enclosure factory made Double door for DB 240 volts with 200 Amps rated bus bar SPN 8 Way, complete all as specified and as directed.
MCB SP 6 to 32 Amp 10 KA 240 Volts, 'C' Series, complete all as specified and as directed.
MCB SPN 32 Amp 10 KA 240 Volts, 'C' Series, complete all as specified and as directed.
1100 Volt grade heavy duty cable PVC Insulated aluminium conductor, served with inner sheathing of PVC tape and over all PVC sheathed in service connection suspended by insulating hanger not more than 1 mtr apart including 4 mm suspension wire, one twin core cable flat or circular 10 sqmm stranded conductor, including taking down old unserviceable service connection complete complete all as specified and directed.
4mm dia galvanised iron or steel wire as in earth continuity conductor or main earthing lead fixed to wall or batten or recess or chases buried in ground complete all as specified and as directed.
Earthing complete with galvanized mild steel earth plate electrode size 600mm x 600mm x 6mm thick buried directly in ground (preferably in vertical position) earth pit not less than 2.25 meter below normal ground level with top edge of the earth plate not less 3 meter (BGL) connected to galvanized iron earth lead wire 4mm dia by means of bolts, nuts, check nut and washer of galvanized iron including PCC pit in RCC 1:2:4 type B-1, precast RCC cover with suitable handle, excavation and earth work in any type of soil, 20mm bore “medium grade” galvanized iron water tubing fixed with cast iron funnel and wire mesh and 15mm bore “light grade” galvanized iron protection pipe for earth lead wire upto 5m length, charcoal, common salt, complete all as shown in EP No 3 of SSR 2009 Part-I, connected to test point complete, all as specified and testing on completion.
M S BANSI LAL CONSTRUCTION CO
AKSHAY CONSTRUCTION COMPANY
Bidder Name
AKSHAY CONSTRUCTION COMPANY
M S BANSI LAL CONSTRUCTION CO
M/S Mohd Saleem Wani and Sons
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .