Construction of Community hall work near Bhomiya ji ka than Transport Nagar Jaisalmer.

Earth work in excavation in foundation, trenches etc. includingdressing of sides and ramming of bottoms, including getting out theexcavated material, refilling after laying pipe/ foundation anddisposal of surplus excavated material at a lead upto 50m suitablesite as per direction of Engineer for following depths, below natural ground / Road top level In all types soils/ saturated soil such as moorum, sand, sandy silt, clay, black cotton soil, kankar, etc. Depth upto 1.5 m

Providing and laying in position cement concrete of specified gradeexcluding the cost of centring and shuttering - All work upto plinthlevel :1:5:10 (1 cement : 5 fine/ coarse sand : 10 graded stone aggregate40 mm nominal size) cum

Random rubble masonry with hard stone in foundation and plinth Cement mortar 1:6 (1 cement : 6 coarse sand)

Centring and shuttering upto two stories or height upto 7.5 metre above plinth level including strutting, propping etc. and removal of form for : 22.1.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers. sqm 299.00

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement - All work upto plinth level : 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) cum

Coursed rubble masonry (second sort) with hard stone in foundation & plinth with : Cement mortar 1:6 (1 cement : 6 coarse sand) Extra for coursed rubble masonry with hard stone (first or second sort) in superstructure above plinth level and upto two stories.

Centring and shuttering with plywood or steel sheet upto two stories ( each story of height upto 3.5 metre from floor level) including strutting, propping etc. and removal of form for :Suspended floors, roofs, landings, balconies and access platform.

Reinforcement for R.C.C. work at all levels cluding straightening,cutting, bending, placing in position and binding all complete. Cold twisted bars ,

M-20 Grade Concrete (1:1½:3 (1 cement : 1½ coarse sand : 3graded stone aggregate 20 mm nominal size) -As per design mix) cum 5530.00

Providing and fixing T-iron frames for doors, indows and ventilators of mild steel Tee-sections, joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 5x10x10 cm of 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or with dash fastener or rawl plugs and screws or with fixing clips or with bolts and nuts as require including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. kg 71.00

29.5 Providing and fixing 1mm thick M.S. sheet door with frame of40x40x6mm angle iron and 3mm M.S. gusset plates at the junctionsand corners, all necessary fittings complete, including applying apriming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces. sqm 4,550.00

Providing and fixing angle iron frame 25x25x3mm for ventilators with fixed wire gauge 16 mesh 24 gauge including 100 mm square bars at interval of 100 mm welded screwed to frame with mental beading 20x3m complete in all respect as per design.

6mm cement plaster to ceiling of mix 1:3 (1 Cement : 3 fine sand)

Cement plastering including T&P, scaffolding, material and complete labour, including cost of water, curing, racking of joints etc. with 12 mm cement plaster of mix : including Providing /mixing of synthetic fibers compulsorily complying with IS 16481:2022 of 06 mm/12 mm length to be mixed @ 0.25% by weight of Cement i.e. 125 gms per 50 kg Cement up to 900 gms per cum of Concrete/ mortar 1:6 (1 cement : 6 fine/ coarse sand) sqm 213.50

Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine Flush/ Ruled pointing

Distempering with oil bound washable distemper of approved brandand manufacture to give an even shadeNew work (two or more coats) over and including priming coat withcement primer.

Painting with synthetic enamel paint of approved brand andmanufacture of required colour to give an even shade: Two or more coats on new work over an under coat of suitableshade with ordinary paint of approved brand and manufacture. sqm 159.50

29.19 Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp of nternal dia 140mm, 73mm height, top lid of 1.5mm thick M.S. sheet with its top surface hacked for roper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3mm dia. round headed screws, one lock at the corners. Clamp shall be made of 12mm dia M.S. bar bent to shapeas per standard drawing. each 1

Providing and fixing on wall face Unplasticised Rigid PVC Single socketed pipes rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. 110 mm diameter metre 312.00

Providing and fixing on wall face Unplasticised - PVC mouldedfittings/ accessories for Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ringconforming to IS : 5382 leaving 10 mm gap for thermal expansion. Bend 87.5°110 mm bend

Providing and fixing 1st quality standard white, grey, ivory, fume redbrown, light green, light blue and other light shades glazed tilesconfirming to IS : 13753 & IS :15622 of size 200mm x 300mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurryfinished with flush pointing in the white cement mixed with pigmentto match the shade of the tile complete (excluding the cost ofcement plaster on walls and pillar).

Providing and fixing Marble stone flooring table rubbed, 15-18 mmthick over 20mm (Av.) thick base of CM 1:4 (1 cement : 4 coarsesand) or slab in wall, steps, pillars, counters, jambs, shelves, sills etclaid over 12mm (Av.) thick base of CM 1:3 (1 cement : 3 coarsesand), jointing with white cement mortar 1:2 (1 white cement : 2marble dust) with pigment to match the shade of the marble slabincluding grinding, rubbing and polishing complete.Rajnagar 1st quality/Ageria with light spotsUpto to 1500 Cm2 Tiles

43.1 Wiring of light point/fan point / exhaust fan point/ call bell point with 1.5 sq. mm FR PVC insulated unsheathed flexible copper conductor 1.1kV grade and 1.5 sq.mm FR PVC insulated unsheathed flexible earth copper conductor 1.1 kV grade (IS:694) of approved make in surface / recessed ISI marked steel conduit & it's accessories, round tiles,18 SWG M.S. box with earth terminal, screwless cage connectors for neutral looping in switch board & false ceiling point, 6 A switch, 3.0 mm thick phenolic laminated sheet, zinc plated / brass screws, cup washers, bushes check nuts, making onnections, testing etc. as required Short point (up to 3 mtr.)

Medium point (up to 6 mtr.

long point (up to 10 mtr..)

Wiring of 3 pin 6 amp. Light plug point with 1.5 sq. mmFR PVC insulated unsheathed flexible copper conductor1.1 kV grade and 1.5 sq.mm FR PVC insulatedunsheathed flexible copper earth conductor 1.1 kVgrade(IS:694) of approved make in surface / recessedISI marked steel conduit & it's accessories, 18 SWGM.S. box with earth terminal, screwless cage connectorsfor neutral looping in switch board & false ceiling point, 6 A switch, 6 A socket, 3.0 mm thick phenolic laminatedsheet, zinc plated / brass screws, cup washers,bushes, check nuts, making onnections, testing etc. asrequired. On board ,

Providing & Fixing of 240/415 V AC MCB with positive isolation of 10kA breaking capacity (B/ C/D tripping characteristic as per type ofload and site requirement) 4 KV impulse withstand voltage, ISImarked IS 8828(1996) / conforming to IEC 60898-1 2002, IEC60947-2, low watt losses, trip free mechanisum , energy limiting ofclass 3 as per IEC, minimum phase termination capacity of 35sq.mm. , conductor line load reversibility , IP 20 contact protectionand fitted in existing istribution board/sheets, minimum electricaloperation 0,000 upto 20 A rating and 10,000 upto 63 A, 5000 for 80A & above rating including making connections, testing etc. asrequired. OEM shall have submit NABL / CPRI / ERDA accrediatedlab type test orts & All as per pre approved by Engineer incharge. For additional technical parameters of product / work referAnnexure 'A' attached with this BSR 50/63 A rating Each 425.00

P&F 240/415 V isolator conforming to IS:13947-III/ IEC60947-3 on existing board / sheet including makingconnections with lugs , testing etc. as required.46.2.1.1 30 A / 40 A rating each 354.00

Providing & Fixing of ISI marked (IS:1258) batten/angle lamp holderwith CM/L no. printed and made out from industrial gradePolycarbonate or fire resistant ABS material, brass terminal & captive screwsincluding making connection esting etc. as required.All as per pre approved by Engineer in-charge. For additionaltechnical parameters of products/ work , refer Annexure "A"attached with this BSR . Each 31.00

Providing & Fixing of BEE Star rated copper wounded double ball bearing capacitor start, aluminium body & Metallic blade ceiling fan Conforming to all the performance requirements laid down in IS 374:2019 including all mendments, as applicable ; & Carry BIS licensing (i.e. ISI marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc.as required. All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .64.7.1 1200 mm Sweep BEE 1 Star rated (service value >=4.0 to < 4.5 ) Each 1,937.00

Stone work (machine cut edges) for wall lining etc. (veneer work)backing filled with a grout of 12mm thick cement mortar 1:3 (1cement : 3 oarse sand) including pointing in white cement mortar1:2 (1 white cement : 2 stone dust) with an admixture of pigmentmatching the stone shade : (To be secured to the backing by meansof cramps which shall be paid for separately) :Red sand tone - Exposed face fine dressed with rough backing.70 mm thick. sqm 1590.00

Providing and laying in position cement concrete of specified gradeexcluding the cost of centring and shuttering - All work upto plinth level : 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Steel work welded in built up sections/ framed work including cutting,hoisting, fixing in position and applying a priming coat of approvedsteel rimer using structural steel etc. as equired In ngs, frames, guard bar, ladder, railings, brackets, gates andsimilar works. kg 144.50