REPAIR/MAINT OF INTERNAL ELECTRIFICATION AND ALLIED CONNECTED WORKS AT ZONE A AREA UNDER GE I RND DELHI

Amount

Taking down of Old unserviceable point wiring any type for light, fan, power etc including unserviceable switch,socket, regulator and ceiling rose etc of any make complete including making good disturbed surfaces of walls, floors roof etc complete all as specified and directed.

Taking down of Celling Fan carefully and deposit in safe coustudy and refixing the same after Painting with synthetic enamel white paint by spraying machine and provide MES No by black paint ,greasing, oiling,minor repairing on the completion of the work all as specified and as directed.

M&L for Point wiring with 1.5 Sqmm multistranded copper conductor cable multistranded, FRLSH PVC insulated and unsheathed in PVC concealed connduit including cutting chasing for conduits and terminal boxes with all fittings /accessories and including FRLSH 1.5 Sqmm PVC insulated copper earth wire connected common earth with terminal boxes 2mm thick GI sheet for Modular fittings including acessories as modular surface cover plate with frame, for one light/Fan/Exhaust Fan/bell point complete all as specified and as directed.

All as per srl item No 3.00 above but for 1 No. 05 Amps Socket outlet point on independent board.

All as per srl item No 3.00 above but for 05 Amps Socket outlet independent but below the switch board.

All as per srl item No 3.00 above but for 05 Amps Socket outlet on the same board.

All as per srl item No 3.00 above but using cable size 2.5 Sqmm for 15 Amps Socket outlet, terminal boxes for Modular switches with 2.5 sqmm earth wire.

M&L for Point wiring with 1.5 Sqmm multistranded copper conductor cable , FRLSH PVC insulated and unsheathed in PVC casing & caping double lock including fixtures and terminal boxes with all fittings /accessories and including FRLSH 1.5 Sqmm PVC insulated copper earth wire connected common earth with terminal boxes 2mm thick GI sheet for Modular fittings including acessories as modular surface cover plate with frame, for one light/Fan/Exhaust Fan/bell point complete all as specified and as directed.

All as per ser item No. 8.00 above but for 05 Amps Socket outlet point on independent board.

All as per ser item No. 8.00 above but using cable size 2.5 Sqmm for 15 Amps Socket outlet.

M&L for Point wiring with 1.5 Sqmm multistranded copper conductor cable , FRLSH PVC insulated and unsheathed in existing PVC counduit including fixures and terminal boxes with all fittings /accessories and including FRLSH 1.5 Sqmm PVC insulated copper earth wire connected common earth with terminal boxes 2mm thick GI sheet for Modular fittings including acessories as modular surface cover plate with frame, for one light/Fan/Exhaust Fan/bell point including taking out old unserviceable paint wiring except conduit complete all as specified and as directed.

All as per ser item No. 11.00 above but using cable size 1.5 Sqmm for 05 Amps Socket outlet point on independent board.

All as per ser item No. 11.00 but using cable size 2.5 Sqmm for 15 Amps Socket outlet with 2.5 sqmm earth wire.

S&F in repair of Glow Plug Top 16 Amps with Indicator complete all as specified and directed.

S&F sheet metal enclosure with socket plug top and MCBs single pole and neutral enclosure with 2 pin and earth plug and socket complete with one single pole MCB 20 Amps complete all as specified and directed.

S&F modular switch 6 Amp single pole one way-1 module complete all as specified and directed.

S&F modular switch 20 Amp single pole one way-2 module complete all as specified and directed

S&F modular socket outlet shuttered-6A-5Pin-universal India 2 Module complete all as specified and directed.

S&F modular socket outlet shuttered-6/16A-5Pin Indian 2 Module complete all as specified and directed.

S&F Fan step regulator 120W - 2 module complete all as specified and directed.

S&Fin replacement of LED Fitting 2x2 ft recessed type 36 W LED complete including connection with 1.5 Sqmm 3 core flexible copper cable complete all as specified and directed.

M&L for modular Bell push 6 Amp 2 Module complete all as specified and directed.

M&L in repair of Bell Ding Dong AC 230Volts single Pole complete all as specified and directed.

S&F in repair LED 10 Watt fitting batten with decorative end cap complete with aluminium housing & integral electronic driver with tube 10 watt complete incl connection with 1.5 Sqmm 2 core flexible copper cable complete all as specified and directed.

S&F in repair LED 10 watt surface mounted downlight of size 200mm dia with white powder coated polycarbonate housing and pressure die cast heat sink having high efficiency complete incl connection with 1.5 Sqmm 2 core flexible copper cable complete all as specified and directed.

S&F in repair LED 15 watt surface mounted downlight of size 200mm dia with white powder coated polycarbonate housing and pressure die cast heat sink having high efficiency complete incl connection with 1.5 Sqmm 2 core flexible copper cable complete all as specified and directed.

S&F in repair LED 18 Watt fitting batten with decorative end cap complete with aluminium housing & integral electronic driver with tube 18 watt complete incl connection with 1.5 Sqmm 2 core flexible copper cable complete all as specified and directed.

S&F in repair LED 20 Watt fitting batten with decorative end cap complete with aluminium housing & integral electronic driver with tube 20 watt complete incl connection with 1.5 Sqmm 2 core flexible copper cable complete all as specified and directed.

S&F in repair of Electronic ballast 36 Watt complete all as specified and directed.

S&F in repair of Electronic ballast 28 Watt for T5 fitting complete all as specified and directed.

S&F in repair of FTL Rod 36 Watt complete all as specified and directed.

S&F in repair of T5 28 Watt tube rod complete all as specified and directed.

S&F in repair of LED bulb 5 Watt (maxglow) B22 Base (6500 K) complete all as specified and directed.

S&F in repair of LED bulb 7 Watt (maxglow) B22 Base (6500 K) complete all as specified and directed.

S&F in repair of remote bells including battery and fixing arrangements complete all as specified and directed.

S&F in repair of extension cord 4x1 5Amps sockets with 1.5 mtr power cable including 5Amps Plug Top complete all as specified and directed.

S&F in repair of extension cord 4x1 5Amps sockets with 4 mtr power cable including 5Amps Plug Top complete all as specified and directed.

S&F in repair of capacitor 2.5mfd including connection complete all as specified and directed.

S&F in repair of Pedstal Fan fan PVC body 400 mm dia having 03 Blade complete all as specified and directed.

S&F in repair of exhaust fan PVC body 200mm dia having 05 Blade including connection and fixing on wall with nuts bolts washers etc complete.

S&F in repair of exhaust fan PVC body 250mm dia having 05 Blade including connection and fixing on wall with nuts bolts washers etc complete.

S&F in repair for MCB VTPN distribution board suitable TPN 4 Way double door 415 Volts complete all as specified and directed.

S&F in repair sheet metal enclosure for DBs 16 Way with acrylic door having 200 Amps rated copper bus bar 240 Volts AC complete all as specified and directed.

S&F in repair sheet metal enclosure for DBs 12 Way with acrylic door having 200 Amps rated copper bus bar 240 Volts AC complete all as specified and directed.

S&F in repair sheet metal enclosure for DBs 08 Way with acrylic door having 200 Amps rated copper bus bar 240 Volts AC complete all as specified and directed.

S&F in repair MCB TPN 63 Amps complete all as specified and directed.

S&F in repair MCB single pole & Neutral 63 Amps complete all as specified and directed.

S&F in repair MCB single pole 6-32 Amps 240 Volt complete all as specified and directed.

S&F lamp holder PVC/polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

S&F ceiling rose 3 phase/PVC/polycarbonate, isolated body complete all as specified and directed.

M&L for in renewal of sub main wiring complete using 4 run of 10 sqmm and 2 run of 10 sqmm PVC insulated unsheathed FRLSH multistranded copper conductor ISI marked 1100 V grade cable in existing concealed PVC conduit fixed in wall/floor, passing through wall/ceiling complete all as specified and directed.

M&L for in renewal of sub main wiring 2x10 sqmm and 1x10 Sqmm earth wire PVC insulated FRLSH multistranded copper conductor ISI marked 1100 V grade cable in existing PVC conduit fixed in wall/floor,passing through wall/ceiling complete.

M&L for in renewal of sub main wiring 2x4 sqmm and 1x4 Sqmm earth wire PVC insulated FRLSH multistranded copper conductor ISI marked 1100 V grade cable PVC in existing concealed conduit or fixed in wall/floor, passing through wall/ceiling complete.

M&L for in renewal of sub main wiring 2x6 sqmm and 1x6 Sqmm earth wire PVC insulated FRLSH multistranded copper conductor ISI marked 1100 V grade cable in existing PVC concealed conduit or fixed in wall/floor, passing through wall/ceiling complete. Note for ser item No. 51 to 54:- Two run of main wire and one run of earth wire shall be measured as one unit.

Material and Labour for earthing complete with GI earth plate electrode 600mmx600mmx6mm thick burried in ground vertically to a depth not less than 2.25meters below ground level with top edge of the earth plate at a depth not lesss than 1.5 meter below the ground level, earth plate surrounded 15cm thick layers of common salt and charcoal dust starting from ground below 15 cm of earth plate and up to 15 cm above the same. GI plate connected with galvanised iron strip of 25x4mm by means of Copper nuts, bolts and washers. Strip laid in 40mm dia light grade GI pipe as protection from top of the plate up to test point (cost of protection pipe up to 7.5 meters from earth electrode will be included in the rates quoted by the contractor) with following:-

(a) GI strip of size 25mm x 4mm. (b) Watering pipe GI light grade 20mm dia from top of the earth electrode up to MS funnel with wire mesh embeded in floor of PCC earth pit. (GI Funnel should properly tightned on GI watering pipe and embeded in PCC floor of earth pit with open top suitable for watering of earth pits). (c) PCC earth pit 30x30x30cm constructed in PCC 1:2:4 type B1 exposed surfaces smoothly finished with 15mm thick cement mortar 1:6 plaster including RCC pit cover 25mm thick with 2 Nos MS handles of 12mm dia suitable for carrying of pit cover. (d) Angle iron frame made of mild steel 40x40x4 mm & for 30x30 cm PCC pit for holding the pit cover. (e ) Apply two coat of syntheticnenamel paint over one coat of red oxide zinc chrome primer on exposed steel surfaces and two coat of hot tar on embedded portion of steel surfaces.

M&L Galvanised iron strip 25x4mm buried in ground including necessay excavation & earth work in soft/loose soil and removal of excavated material n. exc 50m and depositing where directed.

S&F in repair MCCB Four pole 400 Amps 36KA complete all as specified and directed.

S&F in repair MCCB Four pole 250 Amps 36KA complete all as specified and directed.

S&F in repair MCCB Four pole 160 Amps 36KA complete all as specified and directed.

S&F in repair MCCB four pole 100 Amps 16KA complete all as specified and directed.

M&L for Fixing RCCB Double Pole 63A(30mA) complete all as specified and directed.

S&F in repair RCCB Double Pole 40A(30mA) complete all as specified and directed.

S&F in repair RCCB Four Pole 63A(30mA) complete all as specified and directed.

S&F PVC conduit 25mm dia medium grade ISI marked including fittings/accessories concealed in wall including cutting chasing and making good to disturbed surfaces complete all as specified and directed.

S&F in repair PVC Sheathed copper conductor cable 1.5 Sqmm 3 core complete all as specified & directed.

S&F in repair PVC Sheathed copper conductor cable 2.5 Sqmm 3 core complete all as specified & directed.

S&F in repair of heating element 1.5KW for 25Ltr ISI marked hot water heater complete including connection.

S&F in repair of heating element 2.00KW for 50Ltr ISI marked hot water heater complete including connection.

S&F in repair of inlet/outlet assembly to matching the existing 25/50 Ltr capacity geyser inclding fixing and testing complete all as specified and directed.

S&F in repair of copper water tank suitable for 25 Ltr geyser complete including proper fixing and testing after repair complete all as specified and directed.

S&F in repair of copper water tank suitable for 50 Ltr geyser complete including proper fixing and testing after repair complete all as specified and directed.

S&F in repalcement of thermostat switch for 25/50 Ltr geyser including LED indicator lamp complete all as specified and directed.

S&F in repair of switch piano type flush type single pole one way 5 Amps complete all as specified and directed.

S&F in repair of socket outlet 2 in one 3 Pin 5 Amps complete all as specified and directed.

S&F in repair of switch piano type flush type single pole one way 15 Amps complete all as specified and directed.

S&F in repair of socket outlet 2 in one 3 Pin 5 & 15 Amps complete all as specified and directed.

S&F in repair of LED tube rod 18watt double side connection complete all as specified and directed.

S&F in repair of LED tube rod 20 watt double side connection complete all as specified and directed.

S&F in repair of PVC connection 600mm long with brass Nut with rubber washer suitable hot/cold water complete.

S&F in repair of modular cover plate with frame 3 module complete all as specified and directed.

S&F in repair of modular cover plate with frame 4 module complete all as specified and directed.

S&F in repair of modular cover plate with frame 6 module complete all as specified and directed.

S&F in repair of modular cover plate with frame 8 module complete all as specified and directed.

M&L for rewinding of Exhaust fan with super enammelled copper winding wire of suitable gauge, varnishing material including cleaning and removing all dust etc, fixing, connecting with 3 core 1.5 Sqmm copper conductor flexible cable complete and testing after repair complete.

S&F in repair of Ceiling fan 1200mm sweep copper wound of BLDC type having 05 star rating in white colour and connection with 1.5 sqmm 3 core copper conductor cable complete all as specified and directed. Note: Old fan shall be deposited in MES store yard.

S&F in repair of Ceiling fan 1400 mm sweep copper wound of BLDC type in white colour and connection with 1.5 sqmm 3 core copper conductor cable complete all as specified and directed. Note: Old fan shall be deposited in MES store yard.

S&F in repair Gyser 25 ltr complete including fixing on wall with four Nos Anchor Hold fastners fast and 02 Nos PVC connection 600mm long complete all as specified and directed. Note : Old geyser shall be depositted in MES store yard.

S&F in repair of Gyser 50 ltr complete including fixing on wall with four Nos Anchor Hold fastners and 02 Nos PVC connection 600mm long complete all as specified and directed. Note : Old geyser shall be depositted in MES store yard.

Taking down old unserviceable ceiling fan and rewinding with super enamelled copper winding wire of existing gauge including varnish material and replacement of capacitor 2.5 mfd and painting of ceiling fan including fan blade and fixing the same in exising position and connecting with 1.5 Sqmm 3 core copper conductor cable complete all as specified and directed.

S&F in repair of capacitor 4 mfd including connection complete all as specified and directed.

S&F GI Wire 4mm dia for connecting earthing complete all as specified & directed.

Pradeep Bros

Flint India

M/s Wazer Enterprises

Surjit and Sons