Kagal I A Repairing and painting of existing name boards etc

Repairing & painting of existing name boards, layout boards & repair and painting to central verge of 4 lane main road from Laxmi Tekdi to Silver Zone.

Removing old paint fromsteel and other metal surfacesandmakingthe surfaces evenwith hand scrapping, scaffolding etc. complete.

Providing and applying priming coat over new/oldsteelandothermetal surfaces including preparing the surfacebythoroughlycleaningoil,grease, dirt and other foreign matter and scoured with wire brushes, finesteelwool,scrappers and sand paper, scaffolding etc. complete.

Providing and applying priming coat on concrete/ masonary/ AsbestosCementplasteredsurfaces including scaffolding if necessary, preparing thesurfaceby thoroughly cleaning oil, grease, dirt and other foreignmatterandsandpaperingas required etc. complete.

Providing and applying two coats (exteriorquality)of flat oil paint of approved colour and shade to the plastered surface in buildings and workshops including scaffolding if necessary, cleaning the surfaceand preparing surface etc. complete. (excluding primer coat)

Providing and fabricating structural steel work in rolled sections like joists,channels,angles,teesetc.as per detaileddesignanddrawings or as directed including cutting, fabricating,hoisting,erecting, fixing in position making riveted /bolted/weldedconnectionswithout connecting plates, braces etc. and including one coat of anticorrosive paint andover it two coats of oil painting of approved quality and shade etc. complete.

Excavation for foundation in earth, soilofalltypes,sand,gravelandsoft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreadingasdirected, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoringandstruttingetc. complete. (Liftupto0.00to1.50m.)ByManual Means

Providing and laying Cast in situ/ReadyMixcement concrete in M15 of trap/ granite/quartzite/gneiss metal for foundation and bedding / steps includingsteel centering, formwork, laying/pumping, compacting, roughening them if special finish istobeprovided,finishinguneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for renderingunevenandhoneycombed surface, only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centeringwillnotbeallowed.),with fully automatic micro processor basedPLCwithSCADAenabled reversible Drum Type mixer/concrete Batch mix plant (Panmixer) etc. complete.With fine aggregate (Crushed sandVSI Grade)

Providing,erectingpre-castelements such as coverslabsfordrains,grills, kerbs, kerb stone, dividers, manholes, frames,manholescovers, gutters, fence posts grills, rails lintels,sills,bedblocks,stepsorany other member or element as per drawings&specificationsusingRCC gradeM-20 including shuttering as mayberequired,compactingbyplate vibrator, curing and finishing the element where required with 1:3 cementmortar, transporting to site anderectinginpositiongroutingwith cement mortar 1:3 as may be required and curing etc. all labour and material complete. (Including cost of Steel reinforcement)( Rates excluding GST) Elements,weighing from51 to100 kg. (i) Using Crushed Sand

Supplying and Fixing of Molded Shank Raised Pavement Markers / CatsEyemadeofpolycarbonateand ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lensfaceandshall supportaloadof 16000 kg tested in accordance to ASTMD4280TypeHandcomplying to Specifications of Category A of MORTH Circular No RW/NH/33023/10-97 DO III Dt 11.06. 1997. Theheight,widthand lengthshallnotexceed50mm,100 mmand 102+/- 2mmandwith minimumreflectiveareaof13Sqcm on each side and the slope to the baseshall be35+/-5degree. The strength of detachment of the integrated cylindrical shanks, (of diameternot lessthan19+/-2mm and height not less than 30+/- 2 mm) from the body is to be a minimumvalueof500Kg.Fixingwill bebydrillingholeson the road for theshankstogoinside,withoutnails andusingepoxyresinbasedadhesive as per manufacturers recommendation and complete as directed by the engineer.The contractor shall submit a two year warranty for satisfactory field performance including stipulated retro-reflectance of the reflecting panel, to the Engineer.

Providing and fixing reflective fluorescent tape on old road sign board by following the procedure recommanded by manufacturer.Tape shall be consist of white or coloured sheeting having smooth outer surface which has retro-reflection the over property its of entire surface.It shall be weather resistant and show colour fastness.It shall be new and unused and shall show no evidance of cracking,scaling,pitting,blisting,edge lifting and shall have negligible shrinkage or expansion including cleaning / scraping and painting of existing board etc. complete. (Guidance on the recommanded application of each class of tape may be taken from IRC-67)

Please Enable Macros to View BoQ information