REPAIRS AND MAINT OF INTERNAL ELECTRICATION INCLUDING FANS AND GEYSERS AT CADETS LIVING ACCN AND ADMINISTRATIVE BUILDING FOR POP MAY 2022 AND EOT ST 2022 AT NDA KHADAKWASLA

Amount

Taking down carefully copper/aluminium point wiring (light/fan/socket) including all accessories wire, casing caping/conduit, screws etc and making good the disturbed surfaces all as directed

M&L for point wiring with 1.5 sq mm copper conductor FRLSH (multistrand) PVC insulated ISI marked unsheathed cable and including surface, Non metalic rigid PVC casing capping double lock type ISI marked not less than 19 mm with all fitting & other accessories and also including PVC insulated ISI marked unseathed FRLSH cable size 1.5 sq mm copper conductor as earth wire to common earth dolly including PVC box, modular cover plate with frame suitable for modular type switches, sockets, fan regulator incl making good the disturbed surfaces and matching with existing surface complete all as specified and directed. One light/Fan point controlled by one way switch 6 Amps 240 volts Note: Quoted rate shall be deemed including of switch, one moudule cover plate with frame.

Ditto all as per item No. 02 above but One 3 pin 6 Amps socket out let point on independent board. Note: Quoted rate shall be deemed incl of switch, socket,3 module cover plate with frame.

Ditto all as per item No. 02 above but One 3 pin 6 Amps socket out let point on same board. Note: Quoted rate shall be deemed including one module modular switch and socket.

M&L for point wiring with 2.5 sq mm copper conductor FRLSH (multistrand) PVC insulated ISI marked unseathed cable and including surface, Non metalic rigid PVC casing capping double lock type ISI marked not less than 19 mm with all fitting & other accessories and also including PVC insulated ISI marked unseathed FRLSH cable size 2.5 sq mm copper conductor as earth wire to common earth dolly including PVC box , modular cover plate with frame suitable for 15 Amps socket and switch outlet power point independent circuit incl making good the disturbed surfaces and matching with existing surface complete all as specified. Note: Quoted rate shall be deemed incl of 15 amp modular switch, socket,3 module cover plate with frame.

M&L for concealed point wiring drawn through existing conduit of any type with 1.5 sq mm copper conductor FRLSH (multistrand) PVC insulated ISI marked unsheathed 650/1100 V grade conforming to IS 694-1990 adhering to colour code including PVC insulated ISI marked unseathed FRLSH cable size 1.5 sqmm copper conductor as earth wire multistranded green colour with terminal/sunken boxes as required at site incl making good the disturbed surfaces and matching with existing surface complete all as specified. Note: Quoted rate shall be deemed incl of 05 amp modular switch, socket,3 module cover plate with frame.

M&L for secruing loose wiring and repair to point wiring with necessary rigid non metalic PVC casing caping double lock type/ PVC conduit ISI marked of size not less than 19mm inclusive all accessories complete as specified and directed. Note: Quoted rate shall be deemed including of conduit/casing capping

S&F in replacement modular step type fan regulator 120W, 2 module Make- Vinay/Anchor Roma

S&F in replacement modular switch piano type 6 amps one way one module Make - Vinay/ Anchor/Roma

S&F in replacement modular switch piano type 16 amps one way one module Make - Vinay/ Anchor/Roma

S&F in replacement modular Socket, 6A - 2/3 pin 2 module Make - Vinay/Anchor Roma

S&F in replacement modular Socket, 6/16A - 2/3 pin 2 module Make - Vinay/Anchor Roma

S & F in replacement of switch piano flush type 5 Amps SP one way all as specified.

S&F in replacement of switch socket combination with box 5/6 Amps flush mounted 5 pin multi purpose all as specified.

S&F in replacement of switch socket combination with box 5/15 Amps flush mounted 3/5 pin multi purpose all as specified.

S&F in replacement for ceiling rose, 2 to 3 terminals /PVC/Polycarbonate, isolated body.

M & L in replacment of fan regulator electronic step type suitable for 1200/1400 mm sweep fan as per the sample provided by the Engr-in-charge.

M&L for sub main wiring with single core PVC insulated FRLS cables with stranded copper conductors 2.5 Sqmm , 1100 Volts grade in and including casing caping medium grade not less than 19 mm complete with conduit accessories and copper cable 2.5 sqmm continuous earth wire and making good disturbed surface and touch up with the same finishes (Two runs of 2.5 Sqmm cable with 01 run of 2.5 Sqmm earth wire along with casing caping shall be measured as one RM) Note : 2 runs of 2.5 sq mm cable and one run of 2.5 sq mm earth wire and PVC casing/capping will be measured as one meter.

M&L for sub main wiring with single core PVC insulated FRLS cables with stranded copper conductors 4 Sqmm , 1100 Volts grade in and including casing caping medium grade not less than 19mm complete with conduit accessories and copper cable 4 sqmm continuous earth wire and making good disturbed surface and touch up with the same finishes (Two runs of 04Sqmm cable with 01 run of 4 Sqmm earth wire along with casing caping shall be measured as one RM) Note : 2 runs of 4 sq mm cable and one runof 4 sq mm earth wire and PVC casing/capping will be measured as one meter.

Taking down carefully sub main wiring of any type and size and making good disturbed surfaces complete as directed.

S&F in replacement PVC insulated cable 2 core stranded copper conductor 01 sqmm all as specified and directed by Engr-in-charge.

S&F in replacement factory made epoxy powder coated Distribution Board TP & N 4 way double door (VTPN MCCB DB ) MCCB as In comer, with metal door (IP-43 protection) fabricated from CRCA sheet and fixed semi flush to wall and suitable for universal mounting and including 200 Amp copper bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cable management, top and bottom removable gland plates with Knockout semi flush to wall and making good disturbed surface and touch up with the same finishes complete all as specified (Make/Model of VTPN DB : Legrand/L&T/C&S) Note:MCBs/ MCCBs will be measured and paid seperately under respective Sch A item in the schedule

S&F in replacement MCB DB 08 way SPN double door sheet metal enclosure factory made suitable for MCB DB's 240 volts with 200 amp rated busbar, neutral & earthing link bar,surface mounting complete including taking down the existing DB of any type & size alongwith its accessories by removing from existing circuits and refixing the new DBs and circuits complete as reqd at site and making good disturbed surface and touch up with the same finishes as directed. Make C&S/L&T/Havells Note - MCBs will be measured & paid separately under respective item of sch A, if required to be replaced.

S&F in replacement MCB DB 04 way SPN Double door sheet metal enclosure factory made suitable for MCB DB's 240 volts,surface mounting complete including taking down the existing DB of any type & size alongwith its accessories by removing from existing circuits and refixing the new DBs and circuits complete as reqd at site making good disturbed surface and touch up with the same finishesas directed. Make C&S/L&T/Havells Note - MCBs will be measured & paid separately under respective item of sch A, if required to be replaced.

S&F MCCB with rating of 125 Amps,415Volts 3pole with 16kA breaking capacity,thermal magnetic asdjustable of overload & short circuit release as per IS-13947 & IEC 60947-2 & the service short circuit breaking capacity (Ics) should be equal to ultimate breaking capcity(Icu).MCCB should be with suitable spreaders and phase barriers for each terminals. Make C&S/L&T/Havells

S&F in replacement of C Curve MCB SP 6-32 Amps working on 240 volts,50 Hz 10 KA all as specified and directed.

S&F in replacement of C Curve MCB DP 6-32 Amps working on 240 volts,50 Hz 10 KA all as specified and directed.

S&F fix in replacement of C Curve MCB SPN 40-63 Amps working on 240 volts, 50 HZ,10 KA all as specified and directed.

Taking down ceiling fan/exhaust fan of any sweep for servicing / repairing / maintenance, opening up, identifying and replacing the defective parts,such as bearing, capacitor etc and cleaning, greasing,etc, reassembling and hanging up/fixing back at its original position, connecting up and testing complete all as directed. Note : 1.Cost of spares such as capacitors, bearings etc will be measured and paid for separately under respective Item of sch A as supply only.

Supply only capacitor of 2.5 mfd for ceiling fan/exhaust fan. Make:Tibcon/Epcos

Supply only capacitor of 4 mfd for air circulator/exhaust fan. Make:Tibcon/Epcos

Supply only bearing No.6201/6202/6203 or any other No matching to the existing size and suitable for ceiling fan/exhaust fan/wall mounted fan.

S&F in replacment aluminum fan blades sutable for heavy duty exhaust fan of any sweep as per the sample given by the site-in-charge

Disconnecting electric connection and taking down carefully fan of any type and size/sweep as described below, removing the burnt winding of fan motor rewinding with super enarneled copper winding wire of suitable gauge or of matching size to the exisiting wires including all insulating material such as insulation paper sleeve, tape, varnishing etc and reassembling, testing, transporting back to site and reflxing to original position all as directed by Engineer-in-charge for following :- (a) Celling fan of size 1200 sweep.

Ditto all as per item No. 34 above but Air circulator fans size 600 mm sweep wall mounting Oscillating type

Ditto all as per item No. 34 above but Wall mounted/Pedstal fans size 350/450 mm sweep Oscillating.

Ditto all as per item No. 34 above but exhaust fan of 350/450 mm sweep.

Ditto all as per item No. 34 above but exhaust fan of size 600 sweep 3 Phase

M&L for painting the ceiling fan of any sweep with two coats of synthentic enamel paint by rubbing/removing the old paint carefully without any damage to the fan or fan blades all as specified.

Ditto all as per item No. 39 above but exhaust fan of any sweep

Ditto all as per item No. 39 above but Air circulator/Pedestal of size 450/600 mm sweep with superior quality enamel paint (Grey) complete all as directed.

Dismantling and removing rusted louvers (set of 4) suitable for 300 mm sweep exhaust fan supply and fix MS louvers duly painted gray coloured suitable for 300mm heavy duty exhaust fan alongwith four number mounting bracket with bolts, nuts washers etc complete all as directed.

S&F in replacement metallic flexible hot water connection 15 mm bore and 1200 mm long including necessary washers suitable for geysers of 25 ltr capacity complete all as specified and directed.

M&L in replacement of plywood sheet of 19mm thickness for mounting exhuast fans cutting to the size as required at the site including fixing the same with necessary nuts and bolt and fastner arrangement

M&L in replacement of acrylic sheet of 4mm thickness cutting to the size as required at the site including fixing the same with necessary screw arrangement and wooden patti for fixing the sheet as required at site.

S&F in replacement 1x10 watt,230V surface and wall mounted LED batten suitable for mirror light with polycarbonate housing and integrated electronic electronic driver including connecting up with twin core twisted flexible copper conductor cable from ceiling rose all as specified . Make : Luker/Havells/Philips

S&F in replacement of 18/20watt,230V surface and wall mounted LED batten, extruded aluminium housing with polycarbonate diffuser and integrated electronic driver including connecting up with twin core twisted flexible copper condctor cable from ceiling rose all as specified. Make : Luker/Havells/Philips

S&F in replacement LED tube light with diffused optics ultra bright LED tube light 18/20watt with high efficiency suited for installation in existing T8 tube light with G13 lamp holders all as specified and directed. Make : Luker/Havells/Philips

S&F in replacement 1x18/20W,230V surface and wall mounted batten suitable for installing LED Tube including connecting up with twin core twisted flexible copper condctor cable from ceiling rose complete all as specified .

S&F in replacement 36/40 W suspended LED Light with high efficiency providing soft-light and glare free symmetrical illumination including suspension kit including connecting up with twin core twisted flexible copper cable from ceiling rose to fitting complete all as specified and directed. Make: Havells or equivalent in Luker/Philips

S&F honor board LED (warm white) fitting of 1x12 Watt individual LED lenses, chorme coloured. Make: Luker Cat part No. LMCL12 or equivalent in Havells/Philips

S&F LED bulb 1 watt of any color sample given by the Engr-in-charge with B-22 base all as specified. Make:Luker/Syska/Philips

S&F LED high glow bulb 9 watt, Warm White in colour of base B22 complete all as specified. Make: Havells/Crompton/Luker

S&F LED high glow bulb 15 watt, Warm White in colour of base B22 complete all as specified. Make: Havells/Crompton/Luker

S&F high speed wall mounted fan of sweep 400 mm,Full copper motor, auto thermal overload protection,compact style and powder coated guards & pull cord switch for speed regulation and oscillation control including connectng up the power cord to the socket and necessary fixing accessories all as specified and directed. Make: Bajaj/Havells/Crompton

Supply and fixing high speed wall mounted fan of sweep 600 mm, Full copper motor, double ball bearing, compact style and powder coated guards with min air delivery of 250 CMM complete all as specified and directed. Make: Havells catpart no TURBOFORCE WALL or equivalent in crompton/Bajaj

S&F of Plastic ventilation fan of 200/250 mm sweep inclduing replacing the plywood as per the site requirement. (Note: Old Exhuast fan should be deposited in MES store yard) Make: Bajaj/Havells/Crompton

S&F of Metal body ventilation fan of 225 mm sweep inclduing replacing the plywood as per the site requirement. (Note: Old Exhuast fan should be deposited in MES store yard) Make: Bajaj/Havells/Crompton

S&F in replacement for white cover plate with frame 3 module. Make:As per the sample given

S&F in replacement for white cover plate with frame 8 module.Make:As per the sample given

S& F in replacement PVC unbreakable surface boxes suitable for modular switches 8 module.

S& F in replacement PVC unbreakable surface boxes suitable for modular switches 3 module.

S&F in replacement for white cover plate with frame 12 module.Make:As per the sample given

S&F in replacement of 1 module Blanking plates complete all as specifed and directed Make: Vinay/Anchor Roma

S&F in replacement glass dome of at Cadet mess as per existing type and size complete all as specified and directed.

S&F in replacement table lamp fittings white colored suitable for B-22 base cap CFL/bulb with necessary accessories including surface PVC box of circular/square type all as specified. Model: As per the sample

S&F in repalcement recess type LED COB lights 12 W with ceiling cut out of Ø 92 mm Environmental friendly, energy saving, recess mounted downlighter with separate replaceable electronic driver including connecting with twin core wire, including cutting the existing false ceiling dia to the required size and also matching to the adjacent false ceiling surfaces carefully complete all as specified and directed. Make: Luker cat part no. LCOB12N or equivalent in Havells/Polycab

M&L in repalcement recess mounting ceiling lights with recess type LED ceiling lights 18/20 W LED 5700K, 240Volts with 35º spread optics with ceiling cut out of Ø 118 mm Environmental friendly, new generation, energy saving, recess mounted downlighter with high power COB LED as light source & clear glass and separate replaceable electronic driver. including connecting with twin core wire including cutting the false ceiling dia to the required size and also matching to the adjacent false ceiling surfaces carefully complete all as specified and directed. Make:Havells equivalent in Luker/Jaquar

Electronic driver for 30 watts COB lights Make should be as per the Existing manufacturer

Electronic driver for 20 watts COB lights Make should be as per the Existing manufacturer

S&F 200 watt LED flood light luminaire die cast housing and heat sink in aluminium extrusion and IP 66 , using by suitable MS channel complete all as specified and directed. Make Luker Cat No LFL200 or equivalent in Luker/Jaquar/Philips

S&F in replacement of decorative indoor hanging lights black finish suitable for 40 watt E-27 base LED bulb/lamp with necessary accessories hanging chain including surface PVC box of circular/square type complete all as specified. Make : Luker Cat No LHLA7ME27 BK or eqv in Bajaj/Havells Note: Quoted rate shall be deemed include the 40 watt bulb

S&F in replacement of decorative outdoor(IP-54) Bulkhead lights with antique finish including E-27 base 14 watt LED bulb/lamp with necessary accessories hanging chain including surface PVC box of circular/square type complete all as specified. Make : Luker Cat No LGLA2E27 AG BK or eqv in Bajaj/Havells Note: Quoted rate shall be deemed include the 14 watt bulb

S&F in replacement of Aniqua 60 W , IP 65 clear post top and top mounting LED lantern dimensions of 575x332(height and width) mm aluminium housing and heat sink for thermal management, high efficiency long life high bright discreet LED with suitable SPD mounting on existing structure with suitable nut, bolts and necessary welding complete all as specified and directed. Make Bajaj/Luker/Havells

S&F in replacement of LED rope light IP 65 with 5050 LED, warm white incl 2 Pin power supply connector,Connector pin, and End cap as per site requirement fixing at roof of the bldg with suitable PVC saddles for every one mtr on rope. Make : Lucker/HavellsWipro

KESARI AND SONS

Sparkh Electricals & Works