SPL REPAIR FOR HT CABLE RING MAIN INTER CONNECTION BETWEEN MRS AND VARIOUS SUB STATION ALONGWITH CONVERSION OF LT OVER HEAD LINE INTO UG CABLES WITH CONNECTED ITEMS AT SHAKURBASTI AND ANAND PARBAT MIL STN UNDER GE NORTH DELHI CANTT 10

Amount

Supplying, laying, connecting, commisioning and testing HT Cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electrical power cables (heavy duty) with aluminium conductor, 11000 volts grade, cross sectional area 95 Sq mm 3 core, laid in trenches/fixed to pole/passing through pipe, ISI marked as per IS : 7098 ( Part-2 ) complete (Note :- Excavation, earth work ,cable protection, sand filling, cable joint shall be measured and paid separately under relevant items).

Supply, laying, testing and connecting XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, laid in trenches or fixed to pole/wall complete of following sizes :-

(a) 120 sq. mm 3.5 core

(b) 70 Sqmm 3.5 core

(c) 35 Sqmm 3.5 core

(d) 25 Sqmm 4 core

(e) 6 Sqmm 2 core

M&L for Prestressed concrete pole, 11.0 metres long. 152mm x 152mm at top and 152mm x 260mm at bottom, class 9 complete all as specified and directed.

Supply & installation of Gang operated air break switch with drop out fuse unit complete with 12 insulator set, HT 11 KV triple pole, 200 amps current rating complete with drop out fiber glass tube fuse, mechanically operated mechanism from ground level consisting of operating rod of 25mm bore medium grade GI pipe of suitable length with locking arrangement, flat iron clamp 50mm x 6mm including MS channel of suitable size and lenght for fixing GOD including bolts, nuts and washers incuding jumper complete all as specified and directed.

S&F HT lightening arrester metal oxide type (gap less) for out door use complete with all fittings and fixing arrangements, transmission class discharge capacity 65 kilo amps suitable for 11000 volts including brackets, clamps, nuts, bolts, washers and connecting to earth wire 4mm dia GI with manufacturers test certificate complete

M&L for Cable jointing kit for 11 KV (Earthed) grade cable for indoor termination cold shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 50 sqmm to 95 sqmm

M&L for Cable jointing kit for 11 KV (Earthed) grade cable for outdoor termination cold shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 50 sqmm to 95 sqmm

M&L for Cable jointing kit for 11 KV (Earthed) grade cable for straight through cold shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 50 sqmm to 95 sqmm

M & L for steel tubes, light grade galvanised 100 mm bore laid in trenches/walls for cable protection complete all as specified and directed.

Taking down old/unsv OH conductor of any size from existing poles complete

Taking down old/unsv GOD form exist 2/4pole structure complete

Dismantling insulators any type, any size

Dismantling cross-arms of M.S. channel or angle sections etc. complete

Excavation in trenches not exceeding 1.5 mtr width and not exceeding 1.5m depth for laying under ground cable/pipes in any type of soil, complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm complete

Removal of surplus soil obtained from excavated material not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point

M&L for sand cushioning for protection of PVC cable with screen wash river sand and punning to proper required cover. Note : Punned thickness will be measured for payment.

M&L for excavation, removing of mud from culvert below railway crossing complete

M&L for bricks of sub class ‘B’ bricks, for cable protection in trenches laid dry and flat , complete all as specified and directed.

Supplying and laying un-reinforced precast concrete cable cover but class HV, Type 1, flat, size 300mmx l80mm x 40mm complete

PCC (1:3:6) type C-2 using 40 mm graded stone aggregate as in foundations up to ground level complete all as specified and directed.

PCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in coping / or other work including necessary form work complete all as specified and directed.

M & L for PCC root indicator made of PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate suitable for mounting on root of HT cable of width 45cm, thickness 10cm & height 100cm overall embedded to the depth not less than 45cm below ground level complete

M & L for writing letters or figures (Block, Roman, Italic or Indian) n exc. 30 cm high with synthetic enamel paint as per colour scheme

M&L for cross arms, bracings, supports, clamps, angle iron, flats and back plates febricated from MS structural steel sections including nuts, bolts and washers of suitable sizes including welding, bending (cold or hot), drilling holes for bolts in any shape or size as indicated or directed and inclusive of two coats of aluminum paint over one coat of red oxide primer complete

M&L for earthing with Galvanised Steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground vertically at a depth not less than 2.25metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level, earth plate surrounded from all sides by 15cm thick packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by using Galvanised Iron wire of 4 mm dia as earthing lead (upto the body of the equipment) by means of bolts, nuts, check nuts and washers made of galvanised iron and thimbles and protected by light grade 15mm dia GI pipe connected to main switch board or main control board and GI pipe medium grade 20mm bore for watering and including funnel , wire mesh , RCC pit cover and PCC chamber pit with PCC (1:3:6) type C-2 using 40mm graded stone aggregate, including excavation and earth work in any type of soil , returning , filling in approved soil and disposal of surplus soil to a distance not exceeding 50m all as specified and shown in electrical plate No 3 of SSR 1991(Part-I) complete

All as per item No 26 above, but earthng with GI strip 32 x6 as earthing lead and protected by light grade 40mm bore GI pipe.

M&L for loop box out door type made out of Engineering plastic one piece moulding type, Bus bar rating 63 Amps 4 strips aluminium with bus bar mounting colour R,Y,B,N on DMC unbreakable insulator with cable entry main supply from bottom side and pole light connection from back side, simens grey colour, shock proof, rust proof, fire retardant size 300x 200x 100mm with 10 Amps Kit kat fuse type, having front, opening and locking arrangement, duly fixed on the pole by MS clamp of suitable sizes complete (Note:- Incoming and outgoing cables suitable size Lugs,Glands rate deemed to be included) (Make- Unilac/Universal switch gear control/Tricolite)

Shiv Enterprises

NEETU TRADERS (INDIA)