PROVISION OF SYNTHETIC VOLLEY BALL COURT WITH NET FENCING SURROUNDINGS AT OLD OTM COMPLEX AND PROVISION OF MODULAR KITCHEN FOR TYPE IV, TYPE V QUARTERS AT NEW OTM COMPLEX AT AERIAL BAY, DIGLIPUR

Amount

Excavating over areas, not exceeding 1.5 mtr deep and getting out in any type of soil.

Removing of excavated soil material to a distance exceeding 50 mtrs but not exceeding 100 mtrs and depositing where directed at a level not exceeding 1.50 mtr above the starting point.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm in soft/ loose or hard/ dense soil.

Excavating in trenches, not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 sq m on plan and not exceeding 1.5 mtr in depth and getting out in any type of soil (in soft/ loose or hard/ dense soil).

M&L for PCC Type D2, 1:4:8 (using 40mm graded granite stone aggregate) as in foundations, filling and mass concrete.

M&L for PCC Type B1, 1:2:4 (using 20mm graded granite stone aggregate) as in cement concrete in surface channels and drains

M&L for PCC Type B1, 1:2:4 (using 20mm graded granite stone aggregate) as in foundations, filling and mass concrete.

Rolling and consolidating formation surfaces in cutting using power roller of capacity exceeding 8 tonne & not exceeding 12 tonne.

M&L for 100 mm thickness (spread thickness) soling (or sub base) with broken boulders or quarried stone, inter stices filled, surface formed and rolled and consolidated to required gradient and camber

M&L for 10cm thickness (compacted thickness) WBM with granite coarse aggregates of grading 1 (90 to 40mm size), spread, rolled and consolidated to gradient and camber required

M&L 75 mm thickness PCC Type D2, 1:4:8 (using 40 mm graded crushed granite stone aggregate) laid in sub-floors, sub-bases etc. complete all as specified.

M&L 75 mm thickness PCC Type B1, 1:2:4 (using 20 mm graded crushed granite stone aggregate) laid in floors and pavings, etc. surfaces finished even and smooth without using extra cement complete all as specified.

M&L for high yield strength deformed TMT steel bars 6 to 8 mm dia and over as in reinforcement for concrete, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.

S&F volley ball poles (2 Nos) with net made of 100 mm round pipe adjustable height with cup line, movable on 6" nylon wheels 500 to 550 Kg in pair with powder coating colour as specified and directed.

M&L for marking of lines, dashes, arrows, letters, etc. on synthetic pavements and the like not exceeding 10 cm wide with self adhesive tape, white or golden yellow as applicable to basket ball ground like radius, round etc.

M&L for provision of 8 (eight) layer cushion system of all weather synthetic acrylic cushion surface approved by ITF (International Tennis Federation) with one layer finish coat over one layer texture course over one layer base coat over one layer fine rubber course over two layer heavy rubber course, over two layer filler course (Resurfacer) over a coat of Priming (for CC surface) total thickness minimum 3 mm as per manufacturer instructions. Laying and spreading of material uniformily without any undulation and without any variation in colour during laying as per manufacturer instructions. Notes: (i) The work shall be carried out in the presence of company representative & by authorised applicator of company. (ii) Approved make, catalogue and detailed specifications shall be submitted by contractor before start the work. (iii) All materials and design shall be submitted by contractor before start the work. Name of company: Costa Sports Systems Pvt Ltd / Sports Field Safe Products India Pvt Ltd / Sunflex Sports Infrastructure Pvt Ltd / Purple Seas Sports Technology

M&L for 18 mm thickness particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work.

M&L for 12 mm thickness plywood, grade BWP, type BB fixed with screws to timber frame work.

M&L for 0.90 mm thickness decorative laminates type I, or surface finish, colour and pattern as approved, fixed to particle board surface with adhesive.

M&L for 2nd class hardwood plain fillets of sectional area exceeding 13 sq.cm and not exceeding 25 sq.cm square, rectangular or triangular in section, clean sawn, secured with nails or brads.

M&L for preparation of new or previously untreated wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified.

S&F stainless steel basket for curtelery of kitchen items with screws including necessary sliding guide rail etc complete of reputed make.

S&F 3 mm thickness sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 sq. m in each pane.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

M&L for best quality coloured glazed ceramic tiles in vertical surface 300x 200x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match.

M&L for backing coat of 10 mm thick in cement and sand mortar 1:4 on wall surfaces for fixing tiles complete all as specified.

S&F 75 mm long extruded brass handles, fabricated type polished fixed with screws.

S&F continuous (piano) hinges, mild steel, bright finish or electrogalvanised of 30 mm width of flaps (when open)

S&F ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed.

M&L for rendering 10mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces and to be finished even and smooth (without using extra cement) complete.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. and removal of debris as directed.

S&F flood light fitting rectangular LED type of size 120 Watts with thermal management system with die-cast aluminium IP 66 protection, resistant to impact and corrosion, glare free and better uniformity complete all as specified and directed. Make: Havells cat No. JETAIRISFLS120WLED757ASYMLTG or equivalent in Philips/ Bajaj.

Supplying, transporting, erecting and fixing steel tubular swaged poles type 410 SP-55 (11 metres long) complete with cast iron base plate, finial, taper plug, foundation bolts, nuts, screws and anchor plate as specified as per manufactures instructions, including necessary excavation and earth work, PCC 1:1.5:3, type A1 in foundation, disposal of surplus soil to a distance not exceeding 50 m and depositing where directed complete all as specified and directed. Make: Bajaj or equivalent in Philips / Havells / Wipro.

S&F LT junction box for LED flood light, sheet moulding compound (SMC), hinged door type and locking arrangement, off white colour of size 140x140x105 mm (Make: Sintex) comprising aluminium busbar of adequate capacity and 10 Amps, SP, MCB, 01 number bakelite base neutral link and 01 number earthing terminal bolt and nut and connecting up cables with aluminium terminal lugs including suitable size MS clamps all as directed.

M&L for submain wiring with 2 runs of 2.50 Sqmm single core FRLS 1100 volts PVC insulated, unsheathed, multi stranded copper conductor and one single core 2.50 Sqmm FRLS PVC insulated , unsheathed , multi stranded copper cable as earthing lead as per IS : 694 / 1990 drawn through and including PVC casing and capping of size as ordered in walls / ceilings etc complete all as specified and directed. (Note:- 2 runs 2.50 Sqmm cable, one run 2.50 Sqmm cable and one run of PVC casing and capping shall be measured as one unit length) .

Supply, lay and testing XLPE insulated, cores laid up, PVC innersheated, armoured with aluminium strip, glavanised wire, heavy duty LT UG electric cable with solid aluminium conductor, 1100 Volts grade, extruded PVC Type ST2 sheathed, conforming to IS: 7098 (Part I) 1988 of cross- sectional area 2 core 10 sqmm.

Supply and laying of DWC (Double Wall Corrugated) HDPE pipe, ISI marked IS 14390 Part-II, of outer dia 50mm and inner dia 38mm with smooth internal and profiled external surface for non pressure underground cable including all connected accessories like coupler, 'O' Ring etc, for protection of cable complete all as specified and as directed. Make: Red Polyextrusion/ Telerex

Taking down carefully copper/ aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody and making good disturbed surfaces of walls, floors, etc.

Taking down carefully by unscrewing from boards/ outlet boxes, fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings and regulators, etc. for reuse at site or carrying to the store (To be measured only when found serviceable in all respects complete for reuse)

M & L for Point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits), with multi-stranded copper conductor 1.5 Sq. mm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLS cable 1100 volts grade, ISI-694 marked with valid CML No. in and including medium grade rigid PVC conduit with all fittings such as internal bend, end caps etc fixed (concealed in any type of wall including stone masonry) by means of suitable fixing accessories, with GI pressed steel / PVC box suitable for modular switches sunken boxes (with earth dolly) covered with logic modular PVC sheet cover for fixing of switches, sockets etc including PVC insulated multi-stranded copper conductor 1.5 Sqmm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed at site for the following:- NOTE: - Switch and socket to be measured and paid for separately. (a) One light point controlled by one 5/6 Amps one way switch.

(b) One exhaust fan/ fan point controlled by one one way switch.

(c) One Socket outlet, three pin, 6 Amp, controlled by one 6 Amps one way switch on independent board.

All as per item No. 40 here-in-above, but with 4 Sqmm cables for one 3 pin 15 Amps, socket outlet point on independent board.

S&F modular switch 6 Amp, flush type, one way, single pole, 1 module complete. Make: Legrand / Philips / Crabtree

S&F modular switch 16 Amp, flush type, one way, single pole, 1 module complete. Make: Legrand / Philips / Crabtree

S&F modular socket outlet, 3 pin 6 Amp, flush type, 2 modular all as specified and as directed.

S&F modular socket outlet, 3 pin 16 Amp, flush type, 2 modular all as specified and as directed.

S&F Ceiling rose, 3 terminal, PVC/ polycarbonate, isolated body.

M&L for metal flush box 4 module and white cover plate with frame, 4 module.

Fixing only LED light fitting decorative strip type (patty type)1x28 wT5, 230v, with electronic ballasts, bipin holder, connector block, etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size.

Fixing only CFL/ LED light fitting, 1x9 w bulk head luminaries, with lamp holders, etc. complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230V, 50 HZ.

kakolil trade agencies

M/S G S GREWAL