REPAIRS TO SANITARY FITTINGS PIPE LINES TILING PVC DOORS AND JOINERY ITEMS AT KANKINARA UNDER GE N KOLKATA

Amount

Demolition of cement concrete of any description and in any position provided as in roof padding, roof curb etc complete all as specified and as directed. Note: - (a) Demolition should be done carefully to roof slab. (b) Any damage occurred in the roof surfaces during demolition shall be made good by the contractor without extra cost to the department. (c) Disposal of debris/retrieved materials shall be thrown out of site at place as dir by the Engr-in-Charge.

Material and labour for providing plain cement concrete 1:2:4 type B1 using 20mm graded aggregate as in roof padding over RCC roof, Laid in slope as per requirement, mixed with integral water proofing liquid admixture as per manufacturers instructions complete all as specified and directed. Note:- (i) Minimum thickness of PCC shall be 50mm. (ii) Integral water proofing liquied admixiture shall be measured and paid seperately under appropriate item here-in-after.

Material and labour for water proofing treatment with APP based standard membrane over PCC padding in roof with the following courses of treatment for inaccessible roof :- (a) Apply bituminous primer (IS 3384) @ 0.40 Kg per sqm of the surface area including cleaning the surfaces complete all as specified. (MAKE : STP / TEXSA/BITUMAT/BITUNIL/SIKA) (b) Apply APP plastomeric bitumen based mineral finished water proofing membrane polyester reinforced(4 Kg/Sqm) with 10cm over laps and torch bonded at joints including surface preparation before and after application of treatment as per manufactures instruction complete all as specified. (Make of APP Membrane: STP / Moply FP 4 mm mineral of TEXA/WP Shield 103 PM of SIKA or Equivalent material of BITUNIL/BITUMAT.

Material and labour for Cutting grooves in brick wall 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and as directed.

Taking down cement plaster on brick or stone wals, etc. including raking out joints, hacking for keys, scrubbing down with water, etc. complete all as specified and as directed .

Material and labour for rendering 15mm thick in cement mortar (1:6) on fair faces of brickwork or concrete surfaces, finished the surface even and smooth without using extra cement complete all as spec & directed.

Material and labour for rendering 5mm thick on celling in cement mortar (1:3) including finished the surface even and smooth without using extra cement complete all as specified and directed.

Material and Labour for 20 mm thick rendering with CM 1:4 in two layer , 10 mm thick in each layer and mixed with integral water proofing liquid admixture on top layer of external surfaces of brick work or concrete surfaces including finish the surface even and fair complete all as specified and as directed ( Water proofing liquid admixture shall be measured and paid seperately )

Supply only integral water proofing liquid administure for concrete / mortar. Make:- Sika /Pidilite / CICO No 1 / ACCRO No 1 /FOSROC

Material and labour for applying two coats of Oil bound distemper, first quality, over a coat of alkali resistent primer on newly plastered surface of wall including preperation complete all as specified .

All as per item No-10 above but on ceiling surface

Material and labour for preparation of new treated plastered surfaces of wall and applying two coat of cement base paint, first quality, including prepration. complete all as specified and as directed. Make for item Nos.10 to 12:- Asian / Berger / Jenson & Nicholson / Shalimar.

Material and labour for one coat of white wash on old wall surface including preparation. complete all as specified and as directed. Make for lime:- Suryacem / Lovelycem / Birla white.

Dismantling of wall and ceiling boards ( fibre , pulp ,insulation etc ) or insulation boards /slabs/blankets , any thickness , including cover fillets complete all as specified & as directed .

Supply and fix anodized aluminium snap grid frame work (size of grid 605x605mm) for false ceiling including suspenders / hangers 6mm dia GI wire (upto 1200 mm length) adjusting level fixed to roof sheds by means of ceiling cleats made out of GI flat 40x3 mm size 60 mm ling and expansion hold fasteners 12.5 mm dia 40 mm long, complete all as specified & directed. Make:- Jindal/Hindalco/Indalco.

Supply and fix of 6mm thick high pressure steam cured non asbestos fibre cement designer ceiling board of size to suit grid mould (605 x 605mm as specified above) and fix in grid mould with necessary fixing arrangement as per manufacturer’s instruction complete all as specified and directed. Make : Everest / Rhino / Charminar..

Taking down chowkhat with shutter n.exc. 1.50 Sqm each (without taking off shutter from the frames.) complete all as specified and as directed .

Taking down chowkhat with shutter exc. 1.50 & n.exc. 4.00 Sqm each complete all as spec & as dir.

Taking down shutters of any description exe 1.0 sqm and n exe 2.0 Sqm each and refixing in same opening complete all as specified & directed.

Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube with EPDM gasket as per spec & drawing complete all as spec & dir

Supply & fix factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, as per spec & drawing complete all as spec & dir Make for item Nos. 20 & 21:- M/s Rajshri Plastiwood,/ Kumar Arch Tech Pvt Ltd, M/s Sintex India Ltd,/ HINDOPAN,/ Marino / Polyline.

M&L Plain, solid, straight chowkats and frames of 2nd class hard wood, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and as directed. Specie:- Sal / Bijasal / Benteak / Laurel/Hollock ,Chikrassy/, Gamari/, badam /kalasiris. .

Material and Labour for small articles such as clamp , hold fast , wall ties /wind ties , support of valley gutters , support or stays fo rain water , ventilating pipes , including bolts if required etc made of MS flat iron conforming to Fe-290 W ( Gde E-165 ) all as specified and as directed . Make:- Rinl / Sail / Tisco/JAI Balaji industries ltd / Shyam Steel industries Ltd. / SPS stell rolling mills ltd / SRMB Srijan Pvt Ltd / Electrosteel steels ltd / Shyammetallics and energy ltd / Jindal.

Material and labour for PCC (1:3:6) type C-1 using 20 mm graded stone aggregate as in block for fixing of hold fast , window cill and similar items including necessary formwork complete all as spec & as dir .

Supply and fix 35mm thick 2nd class hard wood factory made plain framed panelled door shutters, (two panel) with lock rail and panel of 12mm veneered particle board with commercial veneered on both faces and rail and stiles as per IS 1003(Pt-I), kiln seasoned and chemically pressure treated etc. complete all as specified and as directed.

Supply and fix 30 mm thick 2nd class hard wood factory made glazed and skeleton door shutter, open rebated and prepared to received glass/gauge etc ( without sash bars) edges of framing plain, chamfered or rounded and mitred , beads for securing glass etc, the size of member of shutter as specified in SSR Part 1. complete all as specified and as directed. Specie for item Nos. 25 & 26:- Sal / Bijasal / Benteak / Laurel/Hollock Chikrassy/, Gamari/, badam /kalasiris. Make for item Nos. 25 & 26:- M/s Ambika timber Works, Bikna (Patel Nagar), P.O. Keshlakole, Bankura, W.B./ M/s Premier Wood Craft (P) Ltd., Jessore road, P.O. Ganganagar, Dist – 24 Parganas( West Bengal) / Door kings, Kolkata / Jain Doors PVT Ltd / M/s Supreme Doors and allied products.

S&F small fitting such as window / doors stoppers brackets of any type, made out of 2nd class hard wood article n.exc 200 cum each ,complete all as specified and as directed.(50 mm butt hinges shall be measured and paid separately under supply only rate). Specie:- Sal / Bijasal / Benteak / Laurel/Hollock Chikrassy/, Gamari/, badam /kalasiris.

Supply only Butt hinges of 50 mm size,medium weight, cold rolled mild steel, and fixed complete all as specified and as directed. Make:- Crown / Everlite / Godrej / Harrison / Mowjee/ Hardwin / Doorset

Supply and fix 75 mm size stainless steel butt hinges, medium weight fixed with cadmium plated screws complete all as specified and as directed.

Supply and fix 100 mm size stainless steel butt hinges, medium weight fixed with cadmium plated screws complete all as specified and as directed. Make for item Nos.29 & 30:- Classic / Asian / Alans / KR / Ajanta / Argent / Alans / Bharat / Heitich / Prayag.

Supply and fix 125mm size extruded aluminum alloy handle fabricated type anodized (ISI Marked) complete all as specified and as directed.

Supply and fix 150 mm size extruded aluminum alloy handle fabricated type anodized (ISI Marked) complete all as specified and as directed.

Supply and fix 125mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.

Supply and fix 150 mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.

Supply and fix 200mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed.

Supply and fix 300 mm long aluminium anodised, sliding door with hasp staple (both type) and fixing clips of sheet, cast or extruded section complete all as specified and as directed. Make for item Nos. 31 to 36:- Classic / Asian / Alans / KR / Ajanta / Argent / Alans / Bharat / Heitich / Prayag.

Material and labour for two coats of synthetic enamel paint, first quality, over a coat of pink primer to new wooden surfaces of any description over 10cm width or girth including preparation of new surfaces complete all as specified and as directed. Make:- Asian / Berger / Jenson & Nicholson / Shalimar.

S&F steel window (box type) factory made with side hung shutters including pintol hinges, steel handles, steel peg stay and all locking arrangement complete with glazing bars dovetailed or welded including one shop coat of red oxide primer complete all specified.

S&F for steel windows with side hung shutters including projecting type hinges with steel handle and peg stay without glazing bars but with sash bar complete dovetailed or welded including one shop coat of red oxide primer complete all specified. Make for item Nos.38 & 39;- M/s Modern Fabricators, 23E , Radha Madhab Dutta Garden Lane, Kolkata -10./M/s BA Enterprises, south Stn Road, Agarpara (Salpatabagan), Kolkata – 109. /M/s Sen Harvic, Vora Building, 1st Floor, 50 Nakhoda Street Bombay. /M/s Multiwyn Industrial corporation 3-B, Camac Street, Kolkata – 16 /M/s Agew Steel Manufactures PVT Ltv 522/1, Outside Pachkuva, ahmedabad – 380002 /M/s Doorwyn Industries, 55 Dharmatala Road, Salkia, Howrah ( WB) /M/s Hopes Metal Industries Ltd., P-23 Transport Depot Road , Kolkata – 27 /M/s Ankur Industries, 726 Andul Road (Podra), P.O. Denesh sheikh Lane, Howrah – 711109./M/s Steel Engineers, 203 KabigururabindraNath, Kanchrapara , 24 Parganas(N) WB /M/s NCL Altek and Seccolour Ltd, Hyderabad /M/s Bihar Boddin&Engg work, Katihar (Bihar) / M/S GS Udyog / BA Industries.

S&F for framed work such as grill, gratings, etc with ends of bars shouldered and/or riveted or forged in to spikes, framed guard bars, barred iron doors ladders framed balusters and similar work conforming to Fe 290 Gde E-165 all as specified and directed. Make:- Rinl / Sail / Tisco/JAI Balaji industries ltd / Shyam Steel industries Ltd. / SPS stell rolling mills ltd / SRMB Srijan Pvt Ltd / Electrosteel steels ltd / Shyammetallics and energy ltd / Jindal.

Supply and fix 3mm thick sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane for Metal frame complete all as specified & directed. Make:- Saint Gobain, Modi Float, Triveni Float Glass, Crown, Prayag polymers / Pilkington Glass.

Supply and fix stainless steel wire cloth of 0.36 mm nominal dia of wire and average of width of apreature 1.40 mm, conforming to IS, fixed with stainless wire staples with steel wire staple with steel window or wooden door window. complete all as specified & directed.

M&L for steel ventilator with top hung/ Side hung shutter including hinges, steel peg stay complete all as specified and directed. Make:- M/s Modern Fabricators, 23E , Radha Madhab Dutta Garden Lane, Kolkata -10./M/s BA Enterprises, south Stn Road, Agarpara (Salpatabagan), Kolkata – 109. /M/s Sen Harvic, Vora Building, 1st Floor, 50 Nakhoda Street Bombay. /M/s Multiwyn Industrial corporation 3-B, Camac Street, Kolkata – 16 /M/s Agew Steel Manufactures PVT Ltv 522/1, Outside Pachkuva, ahmedabad – 380002 /M/s Doorwyn Industries, 55 Dharmatala Road, Salkia, Howrah ( WB) /M/s Hopes Metal Industries Ltd., P-23 Transport Depot Road , Kolkata – 27 /M/s Ankur Industries, 726 Andul Road (Podra), P.O. Denesh sheikh Lane, Howrah – 711109./M/s Steel Engineers, 203 KabigururabindraNath, Kanchrapara , 24 Parganas(N) WB /M/s NCL Altek and Seccolour Ltd, Hyderabad /M/s Bihar Boddin&Engg work, Katihar (Bihar) / M/S GS Udyog / BA Industries.

Supply and fix 3mm thick Figured/pin head type glass pane, ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane for Metal frame complete all as specified & directed.complete all as specified & directed.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc 0.50 sqm in each pane including hacking out glass pane complete all as specified and directed. Make for item Nos. 44 & 45:- Saint Gobain, Modi Float, Triveni Float Glass, Crown, Prayag polymers / Pilkington Glass

Supply and fix in repair stainless steel wire cloth of 0.36 mm nominal dia of wire and average of width of apreature 1.40 mm, conforming to IS, fixed with stainless wire staples with steel wire staple with steel window or wooden door and window. complete all as specified & directed.

Material and Labour applying two coats of synthetic enamel paint, first quality, over a coat of red oxide zinc chrome primer on new steel surface exc 10 cm width or girth complete all as specified and as directed. Make:- Asian / Berger / Jenson & Nicholson / Shalimar.

Taking up or down 15 mm bore steel water tubing and connections including cleaning for refixing or removal from site complete all as specified .

All as per Item No-56 above but, of 20 mm bore.

Supply and fix 15 mm bore GI tube , medium grade with all fittings fixed complete to walls and ceilings or laid in floors complete all as specified . Make:- Prakash/Utkarsh Tubes Ltd/Jindal/Zenith/Bansal/Nezone/M/S BST Infratech Ltd.

All as per item No-50 above but of 20 mm bore

All as per item No-50 here in before but fixing only . Note : Serviceable GI Pipe obtained from Item No 48 above shall be reused.

All as per item No-51 here in before but fixing only Note : Serviceable GI Pipe obtained from Item No 49 above shall be reused.

Cutting Chases , pinning in , making good to facing where required and pointing in CM 1:3 to ends or edges of landings , steps , cills , sunshades , shelves , lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good of cutting in brick wall n.exc 10 cm girth complete all as specified .

Supply and fix in repair 15 mm stop cock fancy type, chromium plated each with long shank and cup (concealed type) . Complete all as spec & as directed.

S&F in repair bib taps cast copper alloy chromium plated fancy type with crutch or butterfly handle screwed down screwed down for iron pipe 15 mm bore complete. Make for item Nos. 55 & 56:- Parryware / Essco / Hindware / MarcRoca / Marc / Cera / Crabtree / BluestarMarc / Kohler / Grohe / Gem / Parko / ESS ESS / Lauret / Zoloto / M/S Plastocraft Sanitary ( India) Pvt Ltd ( Brand:- AGRANI/ M/SSomany ceramic Ltd( Ether) / Prayag.

Supply and fix in repair 15 mm Gun-metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed Complete all as spec & as dir. Make:- Make: KALPANA / Upadyaya/ Veenus / Zoloto / Leader / Audco./ Lakshmi

Supply & fix in repair vitreous china wash basin with padestal , white flat size 550x400mm incl bracket cutting for and pining in ends of brackets or erecting stand including PVC connection pipe 15 mm bore 450 mm long , waste coupling of PTMT complete all as specified and directed. Make:- NeycerKermag(standard) / Hindusthan Sanitary Ware (1st quality) / Parryware (superfine) / Cera (1st quality) / classica 1st /Standard) / Johnson Pedder. / Prayag.

Supply and fix in repair 10 litre capacity PVC valve less, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC 32 mm dia, for low level cistern including PVC connections 15mm size with brass nuts and washer both side of length 450mm complete all as specified and as directed. Make:- M/S Johnson Padder / Hindustan sanitary ware / Millennium / Cera / Blue Star Polymers (Speed Flow) / Commander (Water Bird) / Hindware(Sleek) / Parryware(Slimline) / Prayag

Supply and fix in repair15 mm fancy type Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-105 gms complete all as specified and as directed. Make:- M/S Prayag / Polytuf / M/S SakPlast Pvt Ltd./ Shakti Enterprises.

Supply and fix in repair Pillar taps, 15 mm bore fancy type cast copper alloy, with caspstan heads, chromium plated, screwed down high pressure with long screwed shanks and fly nuts, screwed for iron pipe or for connection pipe complete all as specified and directed. Make:- Parryware / Essco / Hindware / MarcRoca / Marc / Cera / Crabtree / BluestarMarc / Kohler / Grohe / Gem / Parko / ESS ESS / Lauret / Zoloto / M/S Plastocraft Sanitary ( India) Pvt Ltd ( Brand:- AGRANI./ M/SSomany ceramic Ltd. ( Ether) / Prayag..

Demolition and breaking up of existing unserviceable UPVC (SWR) pipe 110 mm dia, including fittings, single socketed in any length with rubber ring joint, laid in trenches or in floor/wall, complt all as spec & as dir

Supply and fix in 110 mm bore UPVC (SWR) pipe single socketed in any length with rubber ring joints fixed to walls complete all as specified .

Supply and fix 110 mm bore UPVC (SWR) bend , any radius complete all as specified .

Supply and fix 110 mm bore UPVC (SWR) junction single ( single 'T') equal or unequal complete all as specified .

Supply and fix 110 mm bore UPVC (SWR) Vent Cowl complete all as specified and as directed . Make for item Nos. 63 to 66:- Prayag /Polytuf / Supreme / Prince / Reliance / Jain pipes / Finolex. / Kisan / M/S Fusion Industries LTd.

Supply and fix in repair 50 mm bore High density polyethylene pipes (HDPE) of pressure rating 6 Kgf/ Sqcm fixed complete to wall , ceiling or laid in floor complete all as specified . Make:- Prince / Supreme / Jain pipes / Kisan / Reliance / Finolex.

Supply and fix in repair Grating doom 100 mm dia of PTMT ( Min weight 25 gms ) complete all as specified and as directed . Make:- M/S Prayag / Polytuf / M/S SakPlast Pvt Ltd./ Shakti Enterprises.

Supply and fix in repair Vitreous china Urinal bowl type flat back , size 465 X 355 X 265mm white with grating and union for discharge pipe including providing and fixing plugs , bedding urinal against wall in CM 1:2 , securing urinal to plugs with and including 60 mm long brass screws , pointing around urinal back in cement complete all as specified and as directed . Make:- NeycerKermag(standard) / Hindusthan Sanitary Ware (1st quality) / Parryware (superfine) / Cera (1st quality) / classica 1st /Standard) / Johnson Pedder. / Prayag

Supply and fix in repairs 32mm waste coupling of PTMT ( Half or Full threaded ) min wt 32 mm -45 gms complete all as specified and as directed.

Supply and fix in repairs 40 mm waste coupling of PTMT ( Half or Full threaded ) min wt 32 mm -45 gms complete all as specified and as directed.

Supply and fix in repairs 32 mm waste coupling of PTMT for urinal ( Half or Full threaded ) min wt 32 mm -45 gms complete all as specified and as directed.

Supply and fix in repairs PVC Plain waste pipe of size 32mm dia and 1150mm long complete all as specified and as directed.

S&F in repir PVC connection 15 mm bore with PTMT nut of length 450 mm all as specified and directed. Make for item Nos. 71 to 75:- M/S Prayag / Polytuf / M/S Sak Plast Pvt Ltd./ Shakti Entp.

Supply only plastic water closted seat, closed pattern with flat bottom and mild steel chromium plated or aluminium hinges complete fixed in repair. Make:- NeycerKermag(standard) / Hindusthan Sanitary Ware (1st quality) / Parryware (superfine) / Cera (1st quality) / classica 1st /Standard) / Johnson Pedder. / Prayag

Supply and fix health faucet (ABS body) with 8mm dia 1 meter long flexible tube & wall hook for fixing in 15 mm dia pipe complete all as specified and as directed. Make : Cat No - ALD- BLC-593 of Jaquar / equivalent in Parryware / Essco / Hindware / Marc Roca / Marc / Cera / Crabtree / Bluestar Marc / Kohler / Grohe / Gem / Parko / ESS ESS / Lauret / Zoloto / M/S Plastocraft Sanitary ( India) Pvt Ltd ( Brand:- AGRANI./ M/S Somany ceramic Ltd. ( Ether) / Prayag

S&F in repair Rotational moulded polyethylene water storage tanks(trippled layer ) 1000 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed.

S&F in repair Rotational moulded polyethylene water storage tanks(Trippled layered ) 500 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed. Make for item Nos. 78 & 79:- Rotex /sintex, Polywel / SPL /Polycon /Diplast /Nilkand / Oriplast/ Jindal Jaipur

M&L in repairs 20 mm bore Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete. Make:- KALPANA / Upadyaya / Veenus / Zoloto / Leader / Audco./ Lakshmi.

M&L in repairs 15 mm brass bore ball valves, high pressure, with polyethyelene float and flynut complete, screwed for iron pipe or brass ferrule complete. Make:- KALPANA / Upadyaya / Veenus / Zoloto / Leader / Audco./ Lakshmi.

M&L in repairs 20 mm bore brass ball valves, high pressure, with polyethyelene float and flynut complete, screwed for iron pipe or brass ferrule complete. Make:- KALPANA / Upadyaya / Veenus / Zoloto / Leader / Audco./ Lakshmi.

Suply and fix in repairs stainless steel sink made out of 1.00 mm thick sheet for kitchen with plug washers, PTMT waste coupling , waste pipe including bedding in cement mortar on dwarf wall or including cast iron cantiliver brackets connecting union complete all as specified and directed. Make cat no. Model No BSSB06A of Blue star or SBFB-01A of Joyna or equivalent/Prayag

Suply and fix in repairs stainless steel sink with drainage board made of stainless steel 1.00 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe as per complete all as spec & dir Make cat no BSSBSD-52 of Bluestar or SBSD05 of Joyna or equivalent/Prayag.

Supply and fix stainless steel kitchen plate rack for utensils of size 4"X30"X10" complete all as specified and directed. (Make:Model No KPR-311 of Blue Star or P-330 of Prayag)

Demolition of brickwork built in cement mortar including all quoins, arches, pillars etc. complete all as specified and as directed.

Materials and labour for brick work with brick class designation 75 old size brick, straight or curved on plan, exceeding 6m mean radius, built in cement mortar (1:6), complete as specified and as directed.

Material and labour for brick work with bricks class designation 75, old size, straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) complete all as specified and as directed

Supply and fix Towel rail 600 mm long of PTMT fixed with and including chromium plated beass screws and wooden/ platic cleats ( Min weight 190 gms ) complete all as specified . Make:- M/S Prayag / Polytuf / M/S Sak Plast Pvt Ltd./ Shakti Enterprises.

Supply and fix in repair soap dish any type fixed to plugs with chromium plated brass screws complete all as specified and as directed. Make:- NeycerKermag(standard) / Hindusthan Sanitary Ware (1st quality) / Parryware (superfine) / Cera (1st quality) / classica 1st /Standard) / Johnson Pedder. / Prayag

Supply and fix in repair glass shelf assembly complete all as specified and as directed. Make:- NeycerKermag(standard) / Hindusthan Sanitary Ware (1st quality) / Parryware (superfine) / Cera (1st quality) / classica 1st /Standard) / Johnson Pedder. / Prayag

Supply and fix swivel shower of PTMT any colour for fixing with 15 mm pipe ( Min weight 40 gms ) complete all as specified .

Supply and fix Shower Arm 15 mm size , 195 mm long with bend of 45 degree with flange of PTMT any colour ( Min weight 40 Gms ) complete all as specified . Make for item Nos. 92 & 93:- M/S Prayag / Polytuf / M/S SakPlast Pvt Ltd./ Shakti Enterprises.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for. complete all as specified and as directed.

Use and waste of formwork to sides & sofits of RCC shelves for rough finished concrete surfaces complete all as specified and directed.

Material and labour for providing reinforced cement concrete (1 :1.5 :3 ) type A1 (using 20 mm graded stone aggregate) as in shelves.complete all as specified and directed. (Integral water proofing compound shall be measured and paid separately).

Material and labour for mild steel TMT bars 6 to 8mm bar, cut to length, bent to shape required, including cranking, bending, lapping etc as required and welding with existing bar complete all as specified & directed. (Welding shall be measured and paid separately). Make:-Rinl / Sail / Tisco/JAI Balaji industries ltd / Shyam Steel industries Ltd. / SPS stell rolling mills ltd / SRMB Srijan Pvt Ltd / Electrosteel steels ltd / Shyammetallics and energy ltd / Jindal.

Taking out old unserviceable floor, hearth or wall tiling including cement mortar bedding (but not backing and rubbish off the premises complete all as specified and as directed

Material and labour for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but not exc 0.18 sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15mm thick screed bed or bedding layer in CM(1:6) complete all as specified and as directed.

Material and labour for glazed ceramic colour tiles (300x300) x7mm thick in skirting/dados etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour tiles over and including 10mm thick rendering in CM(1:4) complete all as specified and as directed. Make for item Nos. 99 & 100:- Kajaria / Asian Granito / Somany / VamoraGranito / Nitco / Orient / Jhonson

M/S SHEKHAR TRADING CORPORATION

MOTHER LUMIER INDUSTRIES

MAZUMDER & CO

M/S KARTICK DUTTA

M/S MAHENDRALALL DUTTA

MS SHRI B.C. DAS

SENCO