Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹18.8 LAccepted-AOC 07 KH NO 198 KUDI BHAGTASANI JODHPUR 342001 RAJ | JODHPUR | RAJASTHAN | 342001 | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹19.2 L+₹3,558 (0.19%)Rejected-AOC | L2 | Rejected-AOC Other than Lowest Bidder | |
| 3 | L3₹20.7 L+₹1.5 L (7.71%)Rejected-AOC NIVADA TIVAYA ROAD TIVYA MUST BUS STOP VILLAGE KHATAULI SAHARANPUR UP 247001 | SAHARANPUR | SAHARANPUR | UP | 247001 | L3 | Rejected-AOC Other than Lowest Bidder | |
| 4 | L4₹21.4 L+₹2.2 L (11.6%)Rejected-AOC | L4 | Rejected-AOC Other than Lowest Bidder | |
| 5 | Rejected-Technical | - | Rejected-Technical Due to complete documents not received |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
13 Jul 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE(S) Jaipur
Garrison Engineer (South) Jaipur Military Engineer Services Kalyan Marg, Jaipur302006
COMPREHENSIVE REPAIR AND MAINT FOR BHAKROTA MIL STN JAIPUR UNDER GE (S) JAIPUR
2024_MES_640835_3
GE(S)/J-60P/2023-24 8857/E8
Open Tender
Civil Works
Item Rate
270 days
GE(S) Jaipur
Class E and Category a(i)
9 documents required · 9 mandatory
₹500
GE(S) Jaipur
₹40,000
Yes
8 Oct 2024
15 Jun 2024
20 Jul 2024
15 Jun 2024
13 Jul 2024
29 Jun 2024
Amount
Ceiling Fan Taking down the defective ceiling fan of any size(1200/1400 mm) sweep any make after disconnecting electrically & mechanically incl transportation, dismantling, examine & carry out the repairs as required and brought back to site after Servicing/repairing the ceiling fan by thoroughly cleaning the bearing/Bush,checking serviceability of downrod, shaft, stator, rotor & applying the lubricant / grease including one coat of super enameled varnish over the winding to improve the insulation value,re-assembling, testing and refixing back to the site in all respect complete all as specified and as directed. Note - Spares required for Replacement and rewinding shall be measured and paid separately as supply only in respective items".
Supply only Ball-bearings/bush for ceiling fan of (1200/1400 mm) sweep complete all as specified and as directed. Make: SKF/ NBC
Supply only Ceiling fan downrod of size 12 inch or as per site requirement of material mild steel including clamp hook, rubber nut & bolt requiired for its proper mounting with ceiling complete all as specified and as directed.(Note- The mild steel downrod to be painted as per old U/S existing color with one coat of synthetic enamel paint)
Re-winding the burnt/short circuited winding for ceiling fan of (1200/1400 mm) sweep with same guage super enameled copper wire complete all as specified and as directed.
Supply only capacitor from 2.15 to 3.15 MFD capacity for 1200/1400) mm sweep complete all as specified and as directed.
S&F in repairs stepped type electronic fan regulator 240 V 50 HZ,100 Watts flush type (ISI marked) on the existing phenolic laminated sheet etc complete all as specified and directed.
S&F in repairs modular type stepped electronic fan regulator 240 V 50 HZ,100 Watts modular type (ISI marked) on the existing sheet etc complete all as specified and directed.
Taking down exhaust fan of size(300 / 450 mm) any make, single phase, 230 volts, 50 hz, AC after disconnecting electrically and mechanically incl transportation, dismantling, examine & carry out the repairs as required and brought back to site after Servicing/repairing the exhaust fan by thoroughly cleaning the bearing/Bush, shaft, stator, rotor & applying the lubricant / grease including one coat of super enameled varnish over the winding to improve the insulation value,re-assembling, testing and refixing back to the site in all respect complete all as specified and as directed. Note - “ Spares required for Replacement and rewinding shall be measured and paid separately as supply only in respective items"
Supply only Ball-bearings/bush for exhaust fan of (300 / 450 mm)complete all as specified and as directed. Make : SKF/NBC
Re-winding the burnt/shourt circuited winding for exhaust fan of (300 / 450 mm) with same gauge supper enameled copper wire complete all as specified and as directed.
Supply and fix in repairs exhaust fan motor for (300/450) mm sweep of desired specifications (ISI Marked) to maintain current speed,air flow at load complete all as specified and as directed.
S&F in repairs metal blade of Exhaust fan of size 300 mm sweep complete all as specified and as directed.
S&F in repairs metal blade of Exhaust fan of size 450mm sweep complete all as specified and as directed.
Supply & fix in repairs louvers of appropriate size for exhaust fan of (300 / 450 mm) sweep.
Supply & fix in repairs fasteners of appropriate size for exhaust fan of (300 / 450 mm) sweep.
Supply & fix in repairs nut/bolts/screws of appropriate size for fixing loose exhaust fan of (300 / 450 mm) sweep complete all as specified and as directed.
Supply & fix in repairs fresh air fans of size 300mm sweep of desired IS specifications(ISI marked) BEE five star rating complete all as specified and as directed.
Supply & fix in repairs louvers of appropriate size for fresh air fans of size 300mm sweep complete all as specified and as directed.
Desert cooler Taking down of Desert cooler for Repairs / Servicing (3000/4000) CFM air flow capacity single phase 230 Volts of any make after disconnecting electric/water connection drain out water and carry out minor repair work such as repairing of internal worn out wires, and for replacement of unserviceable parts such as Motor, Fan blade, Lead wire and including testing complete all as specified and as directed. Note “ Spares required for Replacement and rewinding shall be measured and paid separately as supply only in respective items"
Re-winding the burnt/short circuited winding for Desert cooler (3000/4000) CFM air flow capacity single phase 230 Volts of any make with same gauge super enameled copper wire to maintain speed at load complete all as specified and as directed.
Supply only Fan motor for Desert cooler (3000/4000) CFM air flow capacity single phase 230 Volts all as per existing complete all as specified and as directed. Make:- KHAITAN / SUMMER KING/Shakti
Supply only Fan Blade iron body with nut, Bolt, washer for (3000/4000) CFM Desert Cooler of existing or equivalent make complete all as specified and as directed. Make:- KHAITAN / SUMMER KING/Shakti
Supply only Flexible Core PVC insulated with stranded copper conductor 1.5 Sqmm 3 core 1100 V ISI Marked all as directed. Make : Finolex,Havells
Supply and fix in repairs Submersible Vertical pump with suitable head for Desert coolers (3000/4000) CFM air flow capacity single phase 230 Volts complete all as specified and as directed. Make:- KHAITAN / SUMMER KING/Shakti
Supply & fix in repairs Desert Cooler Fan regulator switch for (3000/4000) CFM capacity of existing make or equivalent complete all as specified and as directed. Make:- KHAITAN / SUMMER KING/Shakti
Supply and fix in repairs Switch Piano 5 Amp single pole 230 volt 50 Hz complete all as specified and as directed.
S & F in repairs Plug top for desert cooler 3 pin 5 Amps, 230 Volt AC, ISI marked complete all as specified and as directed.
S&F in repair iron frame clamp as per existing one with required no. of nut & bolt to hold fan as well as motor of Desert cooler complete all as specified and as directed.
Supply and fix in repair Side Panels(set of 3) made of MS Sheet 2 mm thick for (3000/4000) CFM Desert Cooler complete all as specified and as directed.
Supply & fix grass wood wool shelving pad for Desert cooler each set of three of size 18 x 24 inches complete all as specified and as directed.
Supply & fix in repairs PVC flexible pipe (from vertical pump to distributer and distributer to side shutter approx 2 mtr) 15mm dia for Desert cooler including 3 way distributor junction tee set complete all as specified and as directed.
Dismantling/taking down of water cooler (40/80) Ltr for repair such as fan motor,compressor and other minor repair & fixing works as in item no. 23.01 to 23.06 from any place any capacity, transported to workshop & back after repair and testing complete all as specified and directed (i) Spare Parts required for replacement shall be measured separately under respective supply only items given here-in-after for item no. 23.01 to 23.06 (ii) Gas will be measured and paid separately.
Supply only Compressor ( Sealed unit ) suitable for 40/80 Ltr. Water Cooler complete all as specified and as directed. Make : Blue stare/Voltas/Ushasriram
Supply only Fan Motor 1/10 H.P Single phase,230V for water cooler complete all as specified and as directed. Make : GE Motors / Air Master
Supply only Thermostate for water cooler ISI marked complete all as specified and as directed. Make : Denfoss/indfos
Supply only Starting capacitor 60 to 80 MFD 230 volts, 50 Hz complete all as specified and as directed. Make : KELTRON / USHA / SIEMENS
Supply only over load relay suitable for Water cooler 40/80 ltr complete all as specified and as directed. Make : SRIRAM Model SR 412/522 or equivalent of AE
Supply only Fan Motor blade as per sample complete all as specified and as directed.
Air-Conditioning Dismantling/taking down air conditioner 1.5TR/2TR capacity window type from any place and install the AC at another location after proper repair and testing complete all as specified and directed. Note:- All works such as window cutting, drilling holes in wall and applying insulation coating on copper pipe are deemed to be included in this rate. (Repair work and replacement of damaged parts shall be measured and paid seperately).
All as per above item No 24.00. but for AC 1.5/2TR split type complete all as specified and as directed.
Servicing of 1.5TR/2TR capacity window type AC unit by cleaning with air pressure,tighting of bolts and nuts, arresting all leakages with necessary brazing/welding ensuring leak proof cleaning of condensor tubes ,checking of serviceability of fan motor,compressor,relay ,capacitors,PCB Coli,control circuit remote,sensor indicator electric circuits etc. , incl labour for replacing of unserviceable parts except compressor changing of complete all as specified and as directed. Notes : ( i) Replacement of compressor shall be measured and paid separately ( ii) Spare Parts required for replacement shall be measured separately under respective supply only items given here-in-after for item no. 26.01 & 32 to 36. ( iii) Gas will be measured and paid separately.
Supply only Blower Motor, single phase 230 Volts 1500 RPM, suitable for Window type AC 1.5-2 ton complete all as specified and as directed. Make : AUE / USHA
All as per above item No 26.00 but for AC 1.5TR/2TR capacity split type complete all as specified and as directed. Note : (i) Replacement of compressor shall be measured and paid separately. (ii) Spare parts required for replacment shall be measured separately under respective item as supply only given here in after in item No 27.01 & 32.00 to 36.00) (iii) Gas will be measured and paid separately.
Supply only Blower Motor, single phase 230 Volts 1500 RPM, suitable for 1.5 -2.0 TR Split type Air Conditioner complete all as specified and as directed. Make : AUE / USHA
M&L for disconnecting and removing U/S sealed compressor unit from 1.5 TR capacity window type AC including supply and connecting as per existing original sealed compressor unit complete all as specified and as directed. (Make:- CARRIER/Voltas/Blue star/Usha-Daikin/LG/HITACHI/GODREJ)
All as per above item No. 28.00 but for AC 2 TR capacity window type complete all as specified and as directed.
All as per above item No. 28.00 but for AC 1.5TR capacity split type complete all as specified and as directed.
All as per above item No. 28.00 but for AC 2 TR capacity split type complete all as specified and as directed.
Supply only Running capacitor 45 to 50 MFD 230 volts, 50 Hz for window/split AC complete all as specified and as directed. Make : KELTRON / USHA / SIEMENS
Supply only Starting capacitor 100 to 120 MFD 230 volts, 50 Hz for window/split AC complete all as specified and as directed. Make : KELTRON / USHA / SIEMENS
Supply only Plastic filter as per existing makes for Window/split type AC 1.5-2 ton capacity complete all as specified and as directed.
Supply only Over load protector relay suitable Window/split type AC 1.5-2 ton capacity complete all as specified and as directed. Make : SRIRAM / Ranutrol/ Indfoss
Supply only PCB coil suitable for Window/split type AC 1.5/2.0 ton capacity complete all as specified and as directed. Make : LG/Carrier/Blue Star/Voltas/Fedder Lloyd
M&L for gas R 410A all including filling of gas complete all as specified and as directed.
M&L for gas R-134a all including filling of gas as directed and checked by Engr-In-charge.
Replacement of U/S remote control with existing make for Window/split type AC 1.5-2 ton capacity complete all as specified and as directed.
Refrigerator Checking of unservisable/ faulty Refrigerator 320 Ltr capacity installed in various locations for proper repair and testing of Fan motor, thermostatic switch, over load protector relay, box type relay, evaporator coil assembly etc. including testing after repair complete all as specified and as directed. (i) Replacement of compressor shall be measured and paid separately (ii) Spare Parts required for replacement shall be measured separately under respective items as supply only given here-in-after (40.01 & 43 to 46) (iii) Gas will be measured and paid separately.
Supply only fan motor with existing make for refrigerator of capacity 320 Ltr complete all as specified and as directed.
Supply and fixing in repair of compressor (sealed unit) with relay suitable for refrigerator of capacity 320 Ltr complete all as specified and as directed. (Make of compressor Whirl pool / LG / GODREJ/Samsung/Voltas/Hitachi)
Supply only Thermostatic switch with knob suitable for Refrigerator complete all as specified and as directed. Make : INDFOS / RENUTRAL
Supply only over load protector relay suitable for refrigerator of capacity ranging from 320 Ltr complete all as specified and as directed. Make : SRIRAM / Ranutrol/ Indfoss
Supply only Box type relay suitable for refrigerator 320 Ltr capacity complete all as specified and as directed. Make : SRIRAM / Ranutrol/ Indfoss
Supply only Evaporator coil assembly of existing make for refrigerator 320 Ltr capacity complete all as specified and as directed.
Supply & fix in repairs of Magnetic door gasket for refrigerator (180 to 320) Ltr capacity complete all as specified and as directed.
Supply & fix in repairs of freezer door for refrigerator 320 Ltr capacity complete all as specified and as directed. Make:- E Pack polymers.
VOLTAGE STABILISER Re-winding the burnt/short circuited winding for Voltage stabilizer of 4/5KVA rating capacity single phase 230 Volts of any make with same gauge super enameled copper wire complete all as specified and as directed.
Re-winding the burnt/short circuited winding for Voltage stabilizer of 2KVA rating capacity single phase 230 Volts of any make with same gauge super enameled copper wire complete all as specified and as directed.
Re-winding the burnt/short circuited winding for Voltage stabilizer of 1KVA rating capacity single phase 230 Volts of any make with same gauge super enameled copper wire complete all as specified and as directed.
M&L in repair Unserviceable Plug and socket board with metal plug and socket (1 phase+neutral & earth) with 20 Amp rating DP MCB complete all as specified and as directed. Make- Polycab with item code GPDPS10004 in accordance with IS 13032, IS 8623, IEC/BSEN 61439-3.
Supply and fix vegetable box for capacity 320 Ltr refrigerator complete all as specified and as directed.
Supply and fix toughened glass for vegetable box for 320 Ltr capacity refrigerator complete all as specified and as directed. Make:- As per existing make and capacity of refrigerator.
Supply and fix toughened glass bottle self of capacity 320 Ltr capacity refrigerator complete all as specified and as directed. Make:- As per existing make and capacity of refrigerator.
Supply and fix Lamp with holder/Base plate and top toughened glass of capacity 320 Ltr capacity refrigerator complete all as specified and as directed. Make:- As per existing make and capacity of refrigerator.
Geyser Taking down carefully after disconnecting electrical/water supply connections and transporting to the work shop to carry out the servicing / over hauling of the storage type electric water heaters (Geysers) of storage capacity 25 litres of any make / type by cleaing the inner surface of the tank / heating element with chemical to remove the scaling / rust & reassembling the same , required brazing/soldering refixing on its original position including reconnecting only testing complete all as specified and as directed.
S&F in repair of heating assembly with its base plate circular in shape including rubber washer, nuts, bolts, packing material, heating element of capacity 2 KW (ISI marked) as per existing make of geyser complete all as specified and as directed. Make: VenusVenus/ Bajaj /Theeta/Swarna or equivalent ISI marked. Note- item supplied will be as per existing and as directed by Engineer in charge.
S&F in repair of Capillary thermostat with relay/ switch (15Amp 250 Volts) with inbuilt knob for temp variation as per existing sample suitable for 25 litres capacity Geysers complete all as specified and as directed.
S&F in repair of thermal-cutout with heating sensor rod (capillary type) relay/contactor (20Amp 250 Volts) as per existing sample suitable for 25 litres capacity Geysers complete all as specified and as directed.
S&F in repair of neon indicator lamp round or rectangular type (ISI marked) in repair complete all as specified and directed.
S&F in repair Pressure release safety valve for Geysers spring loaded suitable for 15mm pipe chromium plated (ISI marked) complete all as specified and directed.
Supply and fix in repair flexible copper wire PVC insulated, 3 core, 2.5 Sqmm dia multistranded complete as specified and as directed.
M&L for replacement of old U/S Chromium plated stainless steel pipe connection for cold water inlet/ hot water outlet pipe of size 15mm bore complete with nipple/adaptors 450mm long (ISI marked) complete all as specified and as directed.
M&L for replacement of old U/S PVC connection pipe threaded type for cold water inlet/ hot water outlet pipe of size 15mm bore complete with nipple/adaptors 450mm long (ISI marked) complete all as specified and as directed. Make- prayag/polytuf
S&F in repair unserviceable EPDM sheet including required nut, bolt and washer set at both end , used for jointing two flat plate collector/ at end of solar flat plate collector or connection of tubes in evacuated tube solar water heater complete all as specified and as directed.
Supply and fixing in replacement heating element 3000 watt alongwith thermostat of suitable shape and size fitted in Solar water heater tank, conforming to ISI with rubber washers, with clamps complete all as specified and as directed. Make- Thermoking/Hottop other ISI make as approved by GE.
Supply and fixing in replacement U/S stem type thermostat with switch/ Knob suitable for Solar water heater complete all as specified and as directed. Make : Bajaj/ Spherehot/ Racold / other ISI make as approved by GE.
Supply and fix in replacement GI tubing, medium grade in short lengths with all fittings such as elbow, tee, socket, nipple, reducing socket, reducing elbow, reducing tee including guttees / saddles etc of size 20 mm bore and fixed to wall / floor / ceiling including connection to mixing arrangements of hot / cold water and making good disturbed surfaces complete all as specified and as directed.
S&F in repair SP MCB ranging from 6 to 32 Amp B-Curve type 240V, 50 Hz AC supply with breaking capacity of 10 KA in accordance with IS/IEC 60898-1 complete all as specified and as directed.
S&F in repair CP cast copper alloy bib taps with wall flange fancy type of 15mm bore quarter turn complete all as specified and as directed.
S&F in repair fancy type pillar cock 15mm bore cast copper alloy with capstan heads chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts complete all as specified and as directed.
S & F in repair stop valves cast copper alloy, fancy type chromium plated with long shank and cup (concealed type), screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or for unions in 15 mm bore fixed complete all as specified and as directed.
S & F in repair angle stop valves cast copper alloy, fancy type chromium plated, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or for unions in 15 mm bore fixed complete all as specified and as directed.
M&L in repair spindles for 15mm bore CP brass bib cock/ stop cocks etc size 1 nos to 4 nos for full turns/ half turns complete all as specified and as directed.
S & F as in repair stop valves cast copper alloy screwed down high pressure with crutch or butter fly handle, screwed both ends for iron pipe or for unions in 15 mm bore fixed complete all as specified and as directed.
S & F as in repair stop valves cast copper alloy screwed down high pressure with crutch or butter fly handle, screwed both ends for iron pipe or for unions in 20 mm bore fixed complete all as specified and as directed.
S&F in repair CP cast copper alloy 2 way bib tap with wall flange and areator fancy type of 15mm bore quarter turn complete all as specified and as directed.
S&F in repair PVC connection 15mm dia 45cm long with 2 Nos brass check nuts with washer complete all as specified and as directed.
S&F in repair PVC connection 15mm dia 60cm long with 2 Nos brass check nuts with washer complete all as specified and as directed.
S&F in repair of chromium plated overhead shower with revolving joint and 125mm long shower arm with wall falnge 15mm bore fancy type any colour complete all as specified and as directed.
S&F in repair 32mm dia PVC waste pipe flexible type for WHB 60cm long with union complete all as specified and as directed.
S&F in repair waste fittings brass chromium plated 32mm dia for wash hand basin complete all as specified and as directed.
S&F in repair 40mm dia PVC waste pipe for kitchen sink 60cm long with union complete all as specified and as directed.
S & F in repair Waste fittings, brass, chromium plated for stainless steel sink, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed for 40mm dia complete all as specified and as directed.
Taking up or down the existing unserviceable GI pipe and S&F new galvanised steel water tubing medium grade with all fittings and fixed complete to walls and celing or laid in floors of following sizes:-
15 mm bore
20 mm bore
40mm bore
Taking up or down the existing serviceable GI steel tubing and connection including cleaning and refixing old steel tubing with using new fittings in new or old position ( walls,ceiling,floor,trenches etc)
15 mm bore
20 mm bore
S&F in repair small fittings galvanised iron medium grade such as sockets, elbow, nipple upto 200mm, tee, union, reducer socket, reducer tee, tee, union etc for 20mm bore at any height or any floor including taking down plaster/tiles of walls and making good surface of broken wall/floor
S&F in repair small fittings galvanised iron medium grade such as sockets, elbow, nipple upto 200mm, tee, union, reducer socket, reducer tee, tee, union etc for 40mm bore at any height or any floor including taking down plaster/tiles of walls and making good surface of broken wall/floor
S&F in repair PVC syphon set with handle complete for low level flushing cistern complete
S & F in repair PVC valveless, syphonic action type flushing cistern 10 liters capacity, low level, white with inlet, ball valve, float and handle incl brackets & flush pipe of polyethylene of low or high density or PVC, 32mm dia suitable for low level cistern
S&F in repair plastic water closet seat cover white/ colour, closed pattern with flat bottom end cover and mild steel chromium plated hanging device complete all as specified
S&F in repair vitreous china wash hand basin flat back basin including half pedastal, coloured, size of 550 x 400mm including CP waste coupling but excluding taps, waste chain & plug complete all as specified and as directed.
Demolition of old existing unserviceable WHB glazed incl demolition of granite and S&F counter sunk type vitreous china wash hand basin white of 450 x 350mm size complete including all connected accessories and cutting for and pinning in granite/wall for fixing WHB with all finishes complete all as specified and as directed. (Note : New granite fixing measured separately)
S & F in repair Vitreous China urinals,half stall type of 600x395x365mm , complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; flush pipe, grating and Union for discharge pipe and PTMT urinal spreader (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe complete all as specified and as directed.
Dismantling 500 liters water tank and M&L new 500 liters ISI marked three layer rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position & including 20mm brass ball valve all as specified in SSR Part-I complete all as specified and as directed.
S&F in repairs PVC sintex water storage tank lid cover ( cylindrical) for 500 ltrs capacity tanks complete all as specified and as directed.
S&F in repair Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 20mm- 210 gms) complete all as specified and as directed.
S&F in repair vitreous china wash down water closet pan ( pedestal pattern) white including connections to drain ( or outgoing pipe) and to flushing pipe anti sypohonage pipe etc & with plastic WC seat cover white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinges device complete
S & F in repair vitreous china squatting pan 'Orissa' pattern water closet white size 580mm x 440mm with integral foot rest (excluding flushing cistern and flush pipe) complete incl connection to trap & flushing pipe antisyphonage pipe etc
S&F toilet paper holder for CP fixed to walls with chromium plated (CP) brass screws fixed in repair
S&F in repair CP health faucet with chain of 1.2m length of 15mm bore complete all as specified
Dismantling of PVC/ AC or cast iron drain pipes of 100/110mm dia, jointed in cement mortar and taking out of trenches or in wall if required.
S & F Cast iron soil, waste and vent pipes, in any length with or without ears with cement joints, laid in trenches or in floors,100mm bore sand cast pipe
S & F Cast iron soil, waste and vent pipes, in any length with or without ears with cement joints, fix to wall,100mm bore sand cast pipe
Dismantling of PVC/ AC or cast iron drain pipes 75mm bore jointed in cement mortar and taking out of trenches if required.
S & F Cast iron soil, waste and vent pipes, in any length with or without ears with cement joints, laid in trenches or in floors, 75mm bore sand cast pipe
S & F Cast iron soil, waste and vent pipes, in any length with or without ears with cement joints, fix to wall, 75mm bore sand cast pipe
S & F in repair Cast Iron soil cowl 100 mm bore
S & F in repair Cast Iron bends/tee (any radius) 100 mm bore with oval access doors
S & F in repair Cast Iron bends/tee (any radius) 75 mm bore with oval access doors
S & F in repair 100mm bore cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with oval access door complete all as specified and as directed.
S & F in repair 75mm bore cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with oval access door complete all as specified and as directed.
S&F in repair CP grating with/without hole 100mm dia round fix on floor/ nahani trap fixed with cement mortar complete all as specified and as directed.
Dismantling of old unserviceable trap and S&F of CI Nahani / floor trap and square/round in size of 75mm fixed in cement concrete type B-1 (1:2:4) including MS chromium plated grating 100mm dia complete all as specified and as directed.
S & F in repair Stack clamps out of 25mm by 3mm flat iron and 8mm dia round iron stays including bolts and nuts and securing ends of stays to wall or roof for 100 mm bore pipe complete all as specified and as directed.
S & F in repair Stack clamps out of 25mm by 3mm flat iron and 8mm dia round iron stays including bolts and nuts and securing ends of stays to wall or roof for 75 mm bore pipe complete all as specified and as directed.
S&F in repair of 20mm tubular CP towel rail complete all as specified and directed.
S & F in repair drapery rod powder coated 20 mm dia incl fixing brackets and decorative knobs as required on each end of rod of approved pattern and colour complete including taking down old curtain rod with brackets complete all as specified and as directed.
S&F in repair aluminium powder coated peg stay of any size for aluminium window complete all as specified and as directed.
S&F in repair aluminium window handles of any size and any type for aluminium windows complete all as specified and as directed.
Taking down chowkats or frames with shutters not exc 1.50 sqm each (without taking off shutters from the frames) complete all as specified and as directed.
Taking down chowkats or frames with shutters exc 1.50 sqm but n exc 4.00 sqm each (without taking off shutters from the frames) complete all as specified and as directed.
Taking down shutters of any description not exc 1 sq.m complete all as specified and as directed.
Taking down shutters of any description exc 1 sq.m and n not exc 2.00 Sqm complete all as specified and as directed.
Taking down shutters of any description not exc 1 sq.m each and refixing in the same opening after easing and adjusting as required complete all as specified and as directed.
Taking down shutters of any description exc 1 sq.m and n not exc 2.00 Sqm each and refixing in the same opening after easing and adjusting as required complete all as specified and as directed.
Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain/ colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and shown on drawing (Note :-Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life) complete all as specified and as directed.
S&F factory made solid PVC moulded door shutter with particle board core 28 to 30mm thick (stiles) with 2, 4 or raised panel design with2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face supplying & fixing in frame at site as per specification & drawing including PVC sheet fixed on flush shutter in lipping in case of PVC sheet is heat bent as lipping on the edges of doors complete all as specified and as directed.
S & F factory made solid panel PVC door shutter 30mm thick ( style) consisting of frame made out of MS tubes for top & bottom rail. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock & lock rail & bottom rail on either side & as gap insert for top rail & bottom rail panelling of plain colour PVC sheet to be fitted in the ms frame welded/ sealed & rail with suitable PVC sheet beading, and joined together with solvent cement all as per specification & drawing complete all as specified and as directed.
S&F aluminium anodised powder coated frame of approved colour coating for doors, window, ventilators with one or more rebates including joining cleats for fixing etc complete all as specified and as directed.
S&F aluminium anodised powder coated window & ventilators shutter openable type fixed with aluminium sec weighing not less than 0.55 Kg/ mtr incl necessary joining cleats, glazing clips, rubber packing snap beading, screws , handle & tower bolts, roller, incl section of handle, inter locking arrangements, top & bottom of shutter complete all as specified and as directed.
S&F 4.8mm thick coloured glass of any shape and n exc 0.5 Sqm in each pane & complete all as specified and as directed.
S&F 4.8mm thick figured glass, pin headed type and glazing with rubber packing, beading in square n exc 0.5 Sqm in each pane complete all as specified and as directed.
S&F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed.
S & F framed work as in doors or gates of angle or other section as chowkhat or shutters, tie bar, hold fast, guard bars, cooler stand, brackets etc and fixing complete Fe 290 (Gde-E-165) complete all as specified and as directed.
S&F for 30 mm thick Flush Shutters, Solid core construction, Single or double leaved rebating shall be square or splayed, with block board core and both face is covered with decorative mica face panels free from twist or wrap in plane, complete all as specified and directed
S & F 35mm thick factory made plain, framed, paneled door shutters kiln seasoned and chemically pressure treated second class, hardwood (two panels) with lock rail and panel of 9mm thick BWP commercial marine grade ply wood bonded with high quality liquid phenol formal dehyde sy resin adhesive confirming to IS-710. The size of rails & style shall be as per IS-1003 complete all as specified and as directed.
S & F 30mm thick factory made second class hardwood glazed and skelton door shutter kiln seasoned and chemically treated, open rebated and prepared to receive glass/ gauge etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, wire mesh etc complete. The size of members of shutters shall be as specified in MES SSR Part-I complete all as specified and as directed.
S&F Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed with stainless steel screws, type B-21 of size 100mm complete all as specified and as directed.
S&F Aluminium tower bolt of extruded section, 150mm length of bolt and fixed with screws complete all as specified and as directed.
S&F Aluminium handles 150mm size, cast type, anodised complete all as specified and as directed.
S&F 250mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded sections or cast aluminium alloy and fixed with screws complete all as specified and as directed.
S & F in repair mild steel 300mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.
S & F in repair 200 mm long aluminium sliding door bolt with hasp, staple (bolt type) not less than 12 mm dia with & minimum of 6 bolts & nuts , 4 on bolt plate & 2 on staple plate complete all as specified and as directed.
S & F in repair aluminium anodised handles cast moulded type 150mm size fixed with screws complete all as specified and as directed.
S & F in repair aluminium barrel tower bolts of extruded section, 200mm long complete all as specified and as directed.
S&F galvanised mild steel wire cloth 0.50mm nominal dia of wire and average width of aperature 1.00 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and as directed.
Repairing of existing aluminium door/window ventilator of net opening area exc 1.00 Sqm but n exc 4.0 sqm including taking down all members , sheet glass of any thickness cleat , neosprene rubber beading and resecuring all sections & tightening all joints incl fixing new small cleats etc each nexc 100 mm and refixing all members , sheet glass , aluminum cleat but new neosprene rubber beading (paid under seperate item ) and making the door and shutter serviceable , including fixing on Hinges complete all as specified and as directed.(Floor door springs, Neosprene rubber beading ,glass, Hinges, Door Closer where repaired shall be measured and paid under seperate Item
Ditto all as above but window/ventilator shutter but area n exc 1.00 sqm ditto complete all as specified and as directed.
S & F in repair galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples in aluminium windows, panelled doors or any other article etc. complete all as specified and as directed.
Hacking out old broken glass any thickness size, quality or description from wooden/ steel frames fixed with beads/ metal pinning , S&F 4.8mm thick sheet glass in square or rectangular not exc 0.50 Sqm in each pane fixed with wooden beads or by neoprene rubber gasket or by silicon etc complete all as specified and as directed.
_dittio_ all as per item No 153.00 above but pin headed froasted glass 4.8mm thick complete all as specified and as directed.
S & F in repair neoprene rubber gaskets and aluminium beading of any size for fixing glass in aluminium windows/doors complete all as specified and as directed.
S&F door closer hydraulically regulated, designation No 3 universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg fixed in repair complete all as specified and as directed.
S&F in repair for 100 mm mild steel 4 lever mortice lock vertical type of size complete all as specified and as directed.
M & L for repairing of steel rolling shutter without ball bearing including top cover anchoring rod, hasp and staple erected in position by oiling/greasing and tightening of loose component to make smooth functional of shutter complete all as directed by Engineer inchagre Note :- Minor spare parts required for repair of shutter shall be deemed to be included in the quoted rate GE decision in this regard shall be final and binding.
Ditto All as per item No 158.00 above but steel rollng shutter with ball bearings.
S & F in repair 140mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed to bottom rail of door shutter complete all as specified and as directed.
Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) , removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.
M & L Glazed ceramic coloured tiles in vertical surface 300 x 200 x 7mm / 450 x 300 x 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 10mm thick rendering on stone masonary surface or surface other than fair faces of brick work in CM 1:4 complete all as specified and as directed.
M & L coloured non skid ceramic tiles 300x300x7mm thick in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over & incl 15mm thick screed bed in CM 1:6 complete all as specified and as directed.
M & L Non skid cermic coloured tiles 7 to 8mm thick joint free (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match & including 15mm thick screed bed in CM 1:6 complete all as specified and as directed.
All as per item No 165.00 above but as in skirting/ vertical surface over & incl10mm thick rendering on stone masonary surface or surface other than fair faces of brick work in CM 1:4 complete all as specified and as directed.
S&F light shade vitrified ceramic tiles edge cut 10mm thick ( square/ rectangular ) polished, area of each tiles not exceeding 0.36sqm in floor etc set and jointed in neat cement slurry and pointed in white or colour cement to match over & including 15mm thick screed bed in CM (1:6) finished fair and even complete all as specified and as directed.
All as per item No 167.00 above but as in skirting/ vertical surface over & incl 10mm thick rendering on stone masonary surface or surface other than fair faces of brick work in CM 1:4 complete all as specified and as directed.
Dismantling of stone slabs/granite/kota stones on roofs, suspended floors, floors, chajjas, landing etc in any position and any thickness jointed in any mortar complete all as specified and as directed.
M&L granite 18 to 20mm thick (of any type) work (table rubbed and polished in steps, jambs, pillars, windows cills, cooking platforms and including 20mm thick screed bed ( bedding layer) like in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.
M&L machine cut coloured marble slab 16 to 18mm thick in floor, risers & treads of steps, jambs, pillars, window cills, cooking platform, skirting and similar work over & including 20mm thick screed bed ( bedding layer) in CM 1:6, pointing in white cement incluidng cutting and polishing complete all as specified and as directed.
M & L for Machine cut kota stone slab flooring 20-25mm thick over 25 mm thick cement screed bed in CM(1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed
M & L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over 10mm thick cement plaster and jointed with CM 1:6 complete all as specified and as directed.
M&L chequered cement concrete tiles of 300x300mm size and 25mm thick , set , jointed and pointed in neat cement slurry in floors with grey cement and pigment over 20mm thick screed bed in CM 1:6 complete all as specified and as directed.
Taking down cement plaster on brick wall, ceiling etc incl. raking outs joints, hacking for key, scrubbing with water etc. complete all as specified and as directed.
M & L for rendering 15 mm thick on brick masonary surface or fair faces of brick work or on one side of lathing in CM 1:6 finished even and smooth without using extra cement complete all as specified and as directed.
M & L for rendering 15 mm thick on brick masonary surface or fair faces of brick work in CM 1:4 finished even and fair without using extra cement complete all as specified and as directed.
M & L rendering 10 mm thick on brick work or concrete surfaces in ceiling in CM 1:3 finished finished even and fair without using extra cement complete all as specified and as directed.
M & L for preparation of new plastered surfaces of ceiling and applying three coats of white wash on ceiling complete all as specified and as directed.
M & L for preparation of new plastered wall surfaces and applying two coats of cement base paint on wall complete all as specified and as directed.
M & L for preparation of new plastered wall surfaces and applying two coat of oil bound distemper of any tint including priming plastered surfaces with alkali resistant priming paint complete all as specified and as directed.
M & L for preparation of new plastered wall surfaces and applying three coats of white wash on walls complete all as specified and as directed.
M & L for preparation of old plastered surfaces and applying one coat of white wash on ceiling complete all as specified and as directed.
M & L for preparation of old plastered surfaces and applying one coat of Oil bound distemper on ceiling complete all as specified and as directed.
M & L for preparation of old plastered surfaces and applying one coat of white wash on walls complete all as specified and as directed.
M & L for preparation of old plastered surfaces and applying two coats of white wash on walls complete all as specified and as directed.
M&L for preparation of old plastered surfaces of wall incluiding filling of depressions etc by wall putty and applying one coat of oil bound distemper of approved tint complete all as specified and as directed.
M&L for preparation of wall with complete removal of existing treatment of old plastered surfaces incluiding filling of depressions etc by wall putty and applying two coat of oil bound distemper of approved tint complete all as specified and as directed.
M & L for preparation of old plastered surfaces of wall and applying one coat of cement base paint on walls complete all as specified and as directed.
M & L for preparation of old plastered surfaces by complete removal of existing treatment and applying two coat of cement base paint on walls complete all as specified and as directed.
M&L for 1mm thick wall care putty including preparation of New or old plastered surfaces on walls etc. complete all as specified and as directed.
M & L for Painting to new or prevously untreated steel surfaces of any description over 10 cm in width or girth with two coats of synthetic enamel paint over a coat of zinc chrome primer including prepairing of surfaces complete all as specified and as directed.
M & L for Painting to old steel surfaces of any description over 10 cm in width or girth with one coat of synthetic enamel paint including preparation of surfaces complete all as specified and as directed.
M&L for preparation of new or prevously untreated wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.
M&L for preparation of old wooden surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel complete all as specified and as directed.
M&L for preparation of new or prevously untreated wooden surfaces of any description not otherwise described over 10 cm width or girth and applying sizing,filler coat of shellac varnish and high gloss synthetic varnish as finishing coat all as approved by engr in charge and staining in oil etc complete all as specified and as directed.(Note: the finishing of varnish on wooden surface will be passed by Engr in charge) .
M&L for preparation of old wooden surfaces of any description not otherwise described over 10 cm width or girth and applying sizing,filler coat of shellac varnish and high gloss synthetic varnish as finishing coat all as approved by engr in charge and staining in oil etc complete all as specified and as directed.(Note: the finishing of varnish on wooden surface will be passed by Engr in charge) .
M&L for welding in repair of doors/windows/grill any other iron items etc existing damage / broken hinges, handle, frame and any other parts of n. exc. 2.5 cm in length and n. exc. 6 mm in thickness to achieve smooth function complete all as specified and as directed. (Note : 1. welding items like hinges, peg set etc also includes in the rate 2. Electrogalvanised locks incl handles for almirah will measured and paid in seperately as supply & fix in repair 3. wire mesh will measure and paid separatly)
S & F in repair 75mm size hasp and staple, safety type, aluminium anodised and fixed with screws complete all as specified and as directed.
S & F in repair PVC knob for cupboards of 27mm dia size and fixed with screws complete all as specified and as directed.
Taking down and refixing steel cuboard shutter with resecuring or easing & adjusting in same opening n exc 2 sqm each including making good of surface and two coat of synthetic enamel paint complete all as specified and as directed.
Supply & fixing in repair Mild Steel bright finish or electrogalvanised handle with lock including all fixture for inbuilt almirah complete all as specified and as directed.
M & L for grinding and polishing of kota stone/marble/granite complete all as specified and as directed.
Taking down copper aluminium point wiring(light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc and making good disturbed surfaces of walls, floors, etc.complete all as specified and as directed.
M&L point wiring complete with 1.5 Sqmm single core PVC insulated and unsheathed multi stranded copper conductor FRLS cable of 1100 V grade (ISI marked) PVC insulated and sheathed cable enclosed in and including rigid PVC conduit 20mm bore medium grade with all accessories ISI marked,concealed to walls/ ceiling all as per IS including hard wood board and 3 mm thick phenolic laminated sheet top cover fixed or suitable cover for mounting fitting like switches, sockets, fan regulators of piano/ modulor type etc. including 1.5 sqmm single core PVC insulated but unsheathed copper earth continuty conductor to common earth and connected FRLS cable 1100 V grade (ISI marked) as continuous earth wire to earth dolly complete all as specified and directed for followings:-
One light/fan/ bell point controlled by one, one way switch
One 3 pin 5 Amp socket outlet on the same board with other switches
One 3 pin 5 Amp socket outlet on independent board with other switches
All as per item No 205.00 above but Point wiring with 4 Sqmm copper cable for 3 pin 15 Amps socket outlet on independent board, including 4 Sqmm copper cable continuous earth wire and connecting to common earth dolly complete all as specified and directed.
M&L for point wiring complete with 1.5 Sqmm single core PVC insulated and unsheathed multi stranded copper conductor FRLS cable of 1100 V grade (ISI marked) PVC insulated and sheathed cable enclosed in and including PVC Casing and Caping size 32mm x 16mm medium grade with all accessories ISI marked, all as per IS including hard wood board and 3 mm thick phenolic laminated sheet top cover fixed or suitable cover for mounting fitting like switches, sockets, fan regulators of piano/ modulor type also etc. including 1.5 sqmm single core PVC insulated but unsheathed copper earth continuty conductor to common earth and connected FRLS cable 1100 V grade (ISI marked) as continuous earth wire to earth dolly complete all as specified and directed of followings:-
One light point or one fan point controlled by one switch with cables 1.5 sq. mm size
One light point controlled by two 2-way switches, with cables 1.5 sq. mm size
One 3 pin socket outlet 5 amps on the same board with other switches, with cables 1.5 sq. mm size
One 3 pin socket outlet, 5 amps, independent, with cables 1.5 sq. mm size
All as per item No 207.00 above but Point wiring with 4 Sqmm copper cable PVC insulated unsheathed for 3/6 pin 15 Amps socket outlet on independent board, including 4 Sqmm copper cable pvc insulated unsheathed continuous earth wire and connecting to common earth dolly complete all as specified and directed.
S&F in repairs following items of capacity 230/250 volts ISI marked,complete all as speified and directed:-
Switch piano, flush type single pole, one way 6 Amp
Bell push, flush type, AC, 230 volts, single pole 5 Amp rating
Switch Single pole, one way 15 Amp rating
S&F in repairs following items of capacity 230/250 volts ISI marked, complete all as speified and directed:-
Modular switch 1 way 6A, 1 module
Modular switch 1 way 16A, 1 module
Modular Bell push, 6A, 1 module
S & F following flush mounting, 230/250 Volts grade (ISI marked) items, complete all as speified and directed:-
Socket outlet 3 pin, 6 Amp, flush type
Socket outlet 3 pin, 16 Amp, flush type
Switch socket combination 3 pin 5A/16A, flush type, 5 in 1
S & F following modular type, 230/250 Volts grade (ISI marked) items, complete all as speified and directed:-
Modular Socket, 6A - 2/3 pin combined 2 module,
Modular Socket 6A/16A - 2/3 pin combined 2 module
S & F in repair electric bell multi music type AC 230 volts single pole (ISI marked) for AC 230V, 50 Hz ding dong type complete all as specified and directed
S & F in repair lamp holder angle type insulated body with back plate for batten/pendant fitting complete all as specified and directed
S&F in repair Ceiling rose, 3 Phase/ PVC/ Polycarbonate isolated body (ISI marked) complete all as specified and directed by Engr-in-charge.
S&F in repairs of 3mm thick laminated sheet top cover (ISI marked) cut to suitable size and making arrangement for mounting switch, socket,regulator,etc. as all as specified and directed by Engr-in-charge.
S&F in repairs Energy efficient LED building lights of 30 Wattage with PDC Aluminium body and clear glass, LED lens for wide beam distribution with efficacy greater than 100 Lm/watt , 5700K CCT, pf more than .90 all as specified and directed by Engr-in-charge. Note:- Bracket along with screw to fix on wall/ surface duly painted by silver colour paint will be included in above quoted rate.
S&F in repairs Globe shaped post top lantern in frosted finish made up of Polycarbonate, long life aesthetically designed with systematic light distribution with IP 65 with 40 Watt LED Bulb and 5700 K lumen complete all as specified and directed. Note:- Cost of GI pipe of appropriate length and appropriate Dia. to fix post top lamp and cutting of wall/surface along with PCC 1:2:4 to fix GI pipe will be included in above quoted rate.
S&F in repairs 12W Bulk Head light enviro friendly ultra modern energy saving surface mounted decorativeoval bulk head edge lit LED luminaire comprising of High brightness LED Lamp complete all as specified and as directed.
S&F in repairs 15W globe Light including LED Bulb and Base Holder made of Glass/Polycarbonate for decorative wall light fixture complete all as specified and as directed.
S&F in repairs 15W globe Light Glass/Polycarbonate for decorative wall light fixture complete all as specified and as directed. Make: Shakti SZPGB22015 or equivalent
S&F in repairs Aesthetically designed energy saving LED surface lighting fitting round in shape of 15 Wattage having white powder coated CRCA housing and PS diffuser of 6500K CCT as per old U/S existing fittings complete all as specified and as directed.
Supply & fixing in repairs Energy saving environmental friendly, LED Batten Tube Light fittings 20 Watt ,1200mm(4 feet) TL, long life, impact proof,surface/wall mounting IP20,100 Lm per Watt, extruded Thermoplastic body with PC diffuser greater than 120 degree wide distribution available in 6500K CCT with high brightness LEDs complete with all accessories pre-wired twin core twisted flexible copper conductor cable with suitable size complete including dismantling of old existing unserviceable fluorescent/LED TL complete all as specified and as directed.
Supply & fixing in repairs Energy saving environmental friendly, LED Batten Tube Light fittings 10 Watt ,600mm(2 feet) TL, long life, impact proof,surface/wall mounting IP20,100 luminaire per Watt, extruded Thermoplastic body with PC diffuser greater than 120 degree wide distribution available in 6500K CCT with high brightness LEDs complete with all accessories pre-wired twin core twisted flexible copper conductor cable with suitable size complete including dismantling of old existing unserviceable fluorescent/LED TL complete all as specified and as directed.
Supply & fix in repairs False ceiling light LED slim panel of size 2ft x 2ft fitting of 24W having white powder coated extruded aluminium body with high quality LGP and PMMA diffuser suitable for Armstring/ Grid ceiling of 6000K CCT complete all as specified and as directed.
M & L in repair Sub main wiring with 02 runs of 6 Sqmm single core FRLS PVC insulated unsheathed multi stranded copper conductor cable 1100 volts grade (ISI marked) drawn through and including of 25mm dia PVC rigid conduit medium grade with conduit accessories and fixed to the surface of wall/ceiling as per ISI including 01 run of 4 Sqmm PVC insulated copper conductor earth continuity wire coplete all as specified and directed. Note : (2x6 sq. mm +1x4 sq. mm earth wire and 01RM of 25mm dia conduit shall be measured as one unit )
M & L in repair Sub main wiring with 04 runs of 6 Sqmm single core FRLS PVC insulated unsheathed multi stranded copper conductor cable 1100 volts grade (ISI marked) drawn through and including of 25mm dia PVC rigid conduit medium with conduit accessories and fixed to the surface of wall/ceiling as per ISI including 02 runs of 6 Sqmm PVC insulated copper conductor earth continuity wire coplete all as specified and directed. Note:- (4x6 sq. mm +2x6 sq. mm earth wire and 01RM of 25mm dia conduit shall be measured as one unit)
S & F in repair sheet metal enclosure MCB DB 4 way SPN double door suitable for 240 V with and including 100 to 200 amps rated copper bus bar fixed/ flused on walls including cutting Knitch and making good disturbed surfaces complete all as specified and directed.
S & F in repair sheet metal enclosure MCB DB 8 way SPN double door suitable for 240 V with and including 100 to 200 amps rated copper bus bar fixed/ flused on walls including cutting Knitch and making good disturbed surfaces complete all as specified and directed.
S & F in repair sheet metal enclosure MCB DB 12 way SPN double door suitable for 240 V with and including 100 to 200 amps rated copper bus bar fixed/ flused on walls including cutting Knitch and making good disturbed surfaces complete all as specified and directed.
S & F in repair sheet metal enclosure MCB DB 4 way TPN double door suitable for 415 V(with out MCB) with and including copper bus bar fixed flused on walls including cutting Knitch and making good disturbed surfaces complete all as specified and directed.
S & F in repair C-Curve MCB single pole (SP) 240 volt 06-32 amp,10 KA, ISI marked, for inductive load connected through cable lugs of switable size complete all as specified and directed.
S & F in repair MCB single pole neutral(SPN) 40 Amps,10 KA, ISI marked, for inductive load connected through cable lugs of suitable size complete all as specified and directed .
S & F in repair MCB Tripple pole neutral(TPN) 63 Amps,10 KA, ISI marked, for inductive load connected through cable lugs of suitable size complete all as specified and directed .
M&L for earthing complete as per electrical plate No. 3 of MES SSR Part-I with galvanised steel earth plate electrode 60cmx60cmx6.0 mm thick, buried directly vertically in ground in a pit depth not less than 2.5 metres below ground level with top edge of earth plate at a depth not less then 1.8 metre below normal ground level connected to and including galvanised iron or steel earth wire 4 mm dia by means of bolts, nuts check nuts and washers of galvanised iron or steel. Earthing wire shall be protected by galvanised iron or steel pipe 15 mm bore medium grade and connected to continuous earth wire on pole / test point to main board. Watering pipe shall be 20 mm bore GI medium grade. The earthing shall be of inclusive of excavation & earth work in any type of soil, charcoal, salt, funnel PCC pit and RCC cover complete all as specified & directed as well as testing included. Note 1-: Following items deemed to be included in quoted rate (a) Earth Electrode (b) Main earthing lead from earth electrode to test point and further to equipment to be earthed upto 7.5 metre (c) M&L for connecting earth electrode and earthing lead as specified (d) Adequate quantity of charcol dust and common salt as directed (e) All labour involved including testing of earth net work (f) Excavation and earth work or drilling hole for electrode (g) P.C.C pit and C.I cover (h) Funnel and watering pipe, wire mesh and copper lugs etc. as specified (j) G.I protection pipe of size ordered specified for protection of earthing lead from mechanical injury or tempering. (k) connected lead from test point to main switch or switch board or equipment to be earthed. Note 2-: In case, after completion if the desired earth resistance is not obtained on testing then, the earthing will be redone at no extra cost.
S & F in repair modular switch board of 8 module suitable for switches and sockets with suitable base plate and cover plate complete with proper nut bolt and suitable for existing modular socket and switches complete all as specified and directed by engr- in- charge.
BHAKAR RAM AND SONS (BID ID -3059458)
Chaudhary Constructions (BID ID -3055719)
S.R.Enterprises (BID ID -3052482)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .