Improvements to Road of Chittapur Town to Bhankoor Village from Ch. 16.500 to 18.000 Km (from Bhankoor Village to Bhankoor Cross) in Chittapur Constituency of Chittapur Taluka Kalaburagi District (Working Chainage 16.850 to 18.000 Under Appendix-E for the year 2024-25

Construction of Road/Widening and Strengthening

Clearing and grubbing road land including uprooting wild vegetation, grass, bushes,

shrubs, saplings and trees of girth upto 300mm, removal of stumps of such trees cut

earlier and disposal of unserv...

Scarifying the existing bituminous road surface to a depth of 50 mm and disposal of

scarified material by Mechanical Means using Hydraulic excavator with in all lifts and

Excavation for Surface Unlined Drains Construction of unlined surface drains of average cross sectional area 0.40sqm in soil to

specified lines, graded, levels and dimensions, excavated material to be...

Earth work in surface excavation by mechanical means for lowering & leveling the

ground for all works other than foundation in all kinds of soils & upto depth not

exceeding 300mm as per drawing and te...

Construction of Embankment with material obtained from Roadway Cutting Construction of Embankment with approved materials deposited at site from roadway

cutting and excavation from drain and foundatio...

Construction of Embankment with material obtained from borrow pits Construction of Embankment by excavating the available approved Gravel/ Murrum

deposited at a place or borrow pits during or prior ex...

Construction of sub-grade and earthen shoulders with approved material obtained from

borrow pits with all lifts & leads, transporting to site, spreading, grading to required

slope and compacted to mee...

Construction of Earthen Shoulders Construction of sub-grade and earthen shoulders with approved material obtained from

borrow pits with all lifts & leads, transporting to site, spreading, grading to r...

Construction of Granular Sub-Base of required grading as per design mixing in a

mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in

uniform layers with motor grader on p...

Construction of WET MIX MACADAM Providing, laying, spreading and compacting graded stone aggregate to wet mix

macadam specification including premixing the Material with water at OMC in

mechanical mix...

Prime Coat over WMM/WBM Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared

surface of granular base including cleaning of road surface and spraying primer at the

Bituminous Macadam Grading - II for traffic 20 MSA Providing and laying Bituminous Macadam with 40/60 TPH capacity hot mix plant using

crushed aggregates of specified grading premixed with bituminous ...

Tack coat on Bituminous surface Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion

pressure distributor at the rate of 0.20 kg/m2 on the prepared bituminous surface cleaned

Semi Dense Bituminous Concrete Providing and laying Semi Dense Bituminous Concrete with 40/60 TPH capacity hot mix

plant batch type using crushed aggregates of specified grading premixed with bitumino...

Ordinary Kilometer Stone Reinforced cement concrete M15 grade kilometre stone/local stone of standard design as

per IRC:8-1980 fixing in position including painting and printing, etc as per drawing an...

Hectometer Stone Reinforced cement concrete M15 grade kilometre stone/local stone of standard design as

per IRC:8 fixing in position including painting and printing, etc as per drawing and

Road Marking with Hot Applied Thermoplastic Compound with Reflectrising Glass

Beads on Bituminous Surface/ Concrete Surface: Providing and laying of hot applied

thermoplastic compound 2.5 mm thick inc...

Sign Boards Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign

as per IRC:67:2022 made of Class C Type XI retro reflective sheeting fixed over 2 mm

thick aluminium...

Direction and Place Identification Signs with size morethan 0.9 m2 size Board. Providing and erecting direction and place identification retroreflectorised sign as per

IRC:67:2022 made of high intensi...

Concreting M20 Providing and laying in Cement Concrete for all Basement & surface level works, return

walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse

Raised Pavement Markers / Cat's Eye Supplying and Fixing of Molded Shank Raised Pavement Markers / Cat's Eye made of

polycarbonate and ABS moulded body and reflective panels with micro prismatic lens

Providing and constructing un-reinforced plain cement concrete pavement, thickness as

per design, over a prepared sub base, with 43 grade cement or any other type as per

Clause 1501.2.2...

Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...

Maintenance of Road for Three Year (3rd, 4th and 5th)

3rd Year Maintenance

Road Maintenance for 3rd year for road with BM+SDBC as wearing coat.

Maintenance of Road for 3rd year by clearing and uprooting vegetation on wither sides

of road, maintenance o...

3rd Year Maintenance

Road Maintenance for 3rd year for road with BM+SDBC as wearing coat.

Maintenance of Road for 3rd year by clearing and uprooting vegetation on wither sides

of road, maintenance o...

4th Year Maintenance

Road Maintenance for 4th year for road with BM+SDBC as wearing coat.

Maintenance of Road for 4th year by clearing and uprooting vegetation on wither sides

of road, maintenance o...

4th Year Maintenance Road Maintenance for 4th year for road with BM+SDBC as wearing coat.

Maintenance of Road for 4th year by clearing and uprooting vegetation on wither sides

of road, maintenance o...

5th Year Maintenance

Road Maintenance for 5th year for road with BM+SDBC as wearing coat.

Maintenance of Road for 5th year by clearing and uprooting vegetation on wither sides

of road, maintenance o...

5th Year Maintenance

Road Maintenance for 5th year for road with BM+SDBC as wearing coat.

Maintenance of Road for 5th year by clearing and uprooting vegetation on wither sides

of road, maintenance o...

Construction of Hume Pipe Culvert HPC 1 Vent 1.2m dia at Ch. 17.620

Dismantling of existing structures like culverts, bridges, retaining walls and other structure

comprising of masonry, cement concrete, wood work, steel work, including T&P and

scaffolding wherever nec...

Dismantling/Removal of Existing Pipes

Removing all type of Hume Pipes and Stacking including Earthwork and Dismantling of

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m,

as per drawing and technical specifications, including setting out, shoring, strutting,

barricading, caution li...

M10 Bedding for Pipe and Head wallProviding and laying in position plain cement concrete for levelling course for all works in

foundation. The granite/trap/basalt crushed graded coarse aggregates and ...

Laying Reinforced Cement Concrete Pipe NP4 / PrestressedConcrete Pipe on First Class Bedding in Single Row lass bedding of granular material in single row including fixing collar with cement mortar

Concreteing M20 Providing and laying in position Reinforced cement concrete for all Foundation works. The

granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all

materials, machinery, labour, cleaning, straightening, cutting, bending, hooking,

laping/welding joints, ty...

Construction of Embankment by excavating the available approved Gravel/ Murrum

deposited at a place or borrow pits during or prior excavation with all lifts and lead,

transportation to site, spreadi...

Back filling behind abutment, wing wall and return wall complete including compaction as

per drawing and Technical Specification

Providing and laying boulders apron on river bed for protection against scour with stone

boulders weighing not less than 40 kg each complete as per drawing and Technical

specification....

Stone pitching Providing and laying Pitching on slopes laid over prepared filter media including boulder

apron laid dry in front of toe of embankment complete as per drawing and Technical

Painting Two Coats on New Concrete Surfaces Painting two coats after filling the surface with synthetic enamel paint in all shades on new

plastered concrete surfaces

Addendum I Percentage Additionalities for Formwork, Centering & Scaffolding 8 Percentage on finished rate

of concrete per m3

Construction of Hume Pipe Culvert HPC 1 Vent 1.2m dia at Ch. 17.796

Dismantling of existing structures like culverts, bridges, retaining walls and other structure

comprising of masonry, cement concrete, wood work, steel work, including T&P and

scaffolding wherever nec...

Dismantling Stone Masonry Dismantling Brick / Tile work / rubble masonry / pitching / etc by mechanical means

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m,

as per drawing and technical specifications, including setting out, shoring, strutting,

barricading, caution li...

M10 Bedding for Pipe and Head wall Providing and laying in position plain cement concrete for levelling course for all works in

foundation. The granite/trap/basalt crushed graded coarse aggregates and...

Laying Reinforced Cement Concrete Pipe NP4 / PrestressedConcrete Pipe on First Class Bedding in Single Row. Laying Reinforced cement concrete pipe NP4/prestressed concrete pipe for culverts on first

Concreteing M20 Providing and laying in position Reinforced cement concrete for all Foundation works. The

granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all

materials, machinery, labour, cleaning, straightening, cutting, bending, hooking,

laping/welding joints, ty...

Construction of Embankment by excavating the available approved Gravel/ Murrum

deposited at a place or borrow pits during or prior excavation with all lifts and lead,

transportation to site, spreadi...

Back filling behind abutment, wing wall and return wall complete including compaction as

per drawing and Technical Specification

Boulder Apron Providing and laying boulders apron on river bed for protection against scour with stone

boulders weighing not less than 40 kg each complete as per drawing and Technical

specification....

Stone pitching Providing and laying Pitching on slopes laid over prepared filter media including boulder

apron laid dry in front of toe of embankment complete as per drawing and Technical

Painting Two Coats on New Concrete Surfaces Painting two coats after filling the surface with synthetic enamel paint in all shades on new

plastered concrete surfaces

Addendum I Percentage Additionalities for Formwork, Centering & Scaffolding 8 Percentage on finished rate

of concrete per m3

Construction of Hume Pipe Culvert HPC 1 Vent 1.2m dia at Ch. 17.260

Dismantling of existing structures like culverts, bridges, retaining walls and other structure

comprising of masonry, cement concrete, wood work, steel work, including T&P and

scaffolding wherever nec...

Dismantling/Removal of Existing Pipes Removing all type of Hume Pipes and Stacking including Earthwork and Dismantling of

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m,

as per drawing and technical specifications, including setting out, shoring, strutting,

barricading, caution li...

M10 Bedding for Pipe and Head wall Providing and laying in position plain cement concrete for levelling course for all works in

foundation. The granite/trap/basalt crushed graded coarse aggregates and...

Laying Reinforced Cement Concrete Pipe NP4 / PrestressedConcrete Pipe on First Class Bedding in Single Row. Laying Reinforced cement concrete pipe NP4/prestressed concrete pipe for culverts on first

Concreteing M20 Providing and laying in position Reinforced cement concrete for all Foundation works. The

granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all

materials, machinery, labour, cleaning, straightening, cutting, bending, hooking,

laping/welding joints, ty...

Construction of Embankment by excavating the available approved Gravel/ Murrum

deposited at a place or borrow pits during or prior excavation with all lifts and lead,

transportation to site, spreadi...

Back filling behind abutment, wing wall and return wall complete including compaction as

per drawing and Technical Specification

Boulder Apron Providing and laying boulders apron on river bed for protection against scour with stone

boulders weighing not less than 40 kg each complete as per drawing and Technical

Stone pitching Providing and laying Pitching on slopes laid over prepared filter media including boulder

apron laid dry in front of toe of embankment complete as per drawing and Technical

Painting two coats after filling the surface with synthetic enamel paint in all shades on new

plastered concrete surfaces

Addendum I Percentage Additionalities for Formwork, Centering & Scaffolding 8 Percentage on finished rate

of concrete per m3

Earth work excavation for Foundation by mechanical means for all works & depth upto 3

m, as per drawing and technical specifications, including setting out, shoring, strutting,

barricading, caution ...

M10 Bedding Providing and laying in position plain cement concrete for levelling course for all works

in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine

aggregates as p...

Concrete M20 Providing and laying in position Cement Concrete for all Foundation works. The

granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant

IS Codes machine ...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost

of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking,

laping/welding joints, ty...

Addendum I Percentage Additionalities for Formwork, Centering & Scaffolding 35 Percentage on finished rate

of concrete per m3

PART - C Electrification

Octagonal hot dip Pole Fabricating, supplying and erection of . ms long hot dip Galvanized Octagonal hot dip Pole with

BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door...

Galvanized M.S.Bracket Supplying, and fixing of Hot dip Galvanized M.S.Bracket suitable for out door luminaries and

mounted on Octagonal pole using necessary bolts, nuts etc., complete. In all kinds o...

LED Street light Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Inject...

Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existing pole / wall ceiling

including clamps, bolts, nuts and wiring using suitable capacity wires.

Multicore Cable Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible

copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed ...

Mounting MS box made out .SWG Fabricating supplying and mounting MS box made out .SWG suitable for floor /wall mounting,

fully weather proof with provision for better heat dissipation, provided with ...

Aluminium Strips Supplying . A rated 3phase with neutral bus bar using required capacity electrolytic

aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on

phenolic/FRP/DMC i...

Angle iron frame work Supplying and fixing angle iron frame work fabricated out of M.S. angle iron. and M.S.

Flat.with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of...

Porcelain fuse channel

Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using

necessary nuts, bolts and washers 63A

4 pole power contactor Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and a...

Moulded Case Circuit Breaker (MCCB) Supplying and fixing Moulded Case Circuit Breaker (MCCB) over theexisting wood/panel board

using necessary screws, bolts, nuts, necessary phase separators, handle ...

Miniature circuit breakers on existing MCB Supplying & fixing miniature circuit breakers on existing MCB distribution boards using

necessary fixing materials and 'C' Type curve, indicator ON/OFF, ener...

3 Phase Digital Ammeter / Voltmeter Supplying, fixing and wiring 3 Phase Digital Ammeter / Voltmeter

Electronic Trivector Meter (ETV) Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 32/63 A three phase 4 wire

whole current class-1 Accuracy Energy Meter

Supplying and fixing Microprocessor Based Astronomical timer Switch with using necessary

bolts, nuts and washers.

6-32 A DP Supplying & fixing miniature circuit breakers on existing MCB distribution boards using

necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit

4 Core, (11 GI Strips - 4 x 0.8 mm) cable 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Amoured LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickne...

35sqmm UG cable 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Amoured LTUG Cable

as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per ...

UG Cable WorkEarth work excavation for cable trench of 0.5 to 0.75 Mtr. Width and Depth upto 1 Mtr including

trial pits, depositing on bank upto a lead of 50 Mtr, Supplying and Displaying necessary Da...

Laying of cable 2.5 to 25 Sqmm

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using

Wooden/Aluminum Rollers as directed by the departmental staf. 2.5 to 25 Sqmm

Laying of cable 35 to 95 Sqmm Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using

Wooden/Aluminum Rollers as directed by the departmental staf 35 to 95 Sqmm

Refilling the cable trenches with selected available earth from trench excavation including

watering, consolidation in layers of 15 cm. Thickness including depositing of the surplus earth

with a lead ...

UG Cable Work Earth work excavation for cable trench of 0.5 to 0.75 Mtr. Width and Depth upto 1 Mtr including

trial pits, depositing on bank upto a lead of 50 Mtr, Supplying and Displaying necessary D...

PVC Pipe as per IS-2509 PVC Pipe - 63 mm Dia

GI Pipe B - Class as per IS-1239 GI Pipe - 100 mm Dia

HDPE pipe Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016

with latest ammendments and conveying to work site including loading and unloading at both

Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other

equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit .

Aluminium End Terminal (Lug) 16 Sqmm

PVC Pipe as per IS-2509 PVC Bend - 63 mm Dia

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as

per drawing and technical specifications, including setting out, shoring, strutting, barricading,

Providing and laying in position Cement Concrete for levelling course for all works in foundation.

The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS

M20 concrete Providing and laying in position Cement Concretefor all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates bas per relevant IS Codes machine mi...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all

materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding

joints, tyin...

GESCOM Deposit and electrical accessories

Estimate Prepared for Shifting of HT / LT Line, LT AB Cable and 3 Nos of 100 KVA DTC Transformers at Bhankur Section in Shahabad Sub Division (Under Self Execution) PART - A Material Cost

200105-RCC Pole-9.0M Long,145 kg WL

27901205-11 kV Horizontal cross arm wit

2791002-DP Structure with 9 Mtrs RCC P

2811101-Guy with Complete set

283008-11kV, 5KN Composite/Polymeric

283040-DISC Insulators 45kN

284108-Rabbit ACSR Conductor

821939-Base concrete 1:4:8 500x650

821941-Coping 1:2:4 (as per actuals)

PART - B Material Cost

278811-11kv Danger board

278911- Barbed wire (10 mts.)

27911104-9 Mtr RCC DP Transformer Strct

2798001-Fish plate with necessary clam

281008-8 SWG G.I.Wire

281110-7/10 SWG Guy Wire

2811101-Guy with Complete set

2811103-Earthing Materials Type for gr

283008-11kV, 5KN Composite/Polymeric

283320-Silcon rubber composite insula

284503-LT Spacer for TC Wiring

285557-120Sq.mm (P.G. Clamps Rabbit

288532-120 Sq.mm Copper terminals (Lo

301107-L.T.Protection kit

301230-L.T.Distribution Box for 100 /

302011-11 kV D.O.L.O Cutouts Convent

303200-L.A. 9kV, 5kA, Metal Oxide

304212-11kV G.O.S 200A Single break

357510-L.T. Electronic Tri-Vector Met

358066-With CT ratio150/5 for 100 kVA

821939-Bae concreting 1:4:8 500x650

821942-Fenching for DTC of 1 Nos

821945-c) coping 1:2:4 (as per actuals

PART - C Material Cost

200105-RCC Pole-9.0M Long,145 kg WL

27901220-Stud pole guy using 8 Mtr Long

2811101-Guy with Complete set

281683-Spiral Earth Electrode

284223-Piercing connector suitable fo

284284-Universal hook & Bolts & nuts

284819-3x95+1x70+1x16 street light (I

284821-Three phase Distribution box f

284822-Piercing connector suitable fo

284825-Dead end clamp / Anchor clamp

284829-Tee-connectors- KZ3 95

284832-Straight joints suitable for 9

284833-End cap for 50/70 Sq.mm

284837-Pre-Insulated lugs-CPTAU for 9

284838-Suspension Clamp Assembly16 to

284844-Pole Clamp for HT/LT AB cables

284845-Eye Hook (Flat Type) for fixin

289027-PVC Wire-25 Sq.mm

821939-Base concretting 1:4:8 500x650

821945-c) coping 1:2:4 (as per actuals

PART - D Material Cost

790100-a) MS Iran Scrap pole, I beam, crass

791101-ACSR conductor Scrap

795501-Scrap ABC Cable

Estimate Prepared for Shifting of HT / LT Line, LT AB Cable and 3 Nos of 100 KVA DTC Transformers at Bhankur Section in Shahabad Sub Division (Under Self Execution) PART - A Labour Cost

0 Erection of RCC/PSC

poles 9 to 10 mtr long but

in a pit of 1.8 mtr depth

Loading & unloading of 9

mtr RCC/PSC poles

Fixing of V Shape/Horizontal cross

arm including single top

support Braces and

Insulators fixing

Same as above using

RCC poles 9 mtr to 10 mtr

a) Fixing of GUY Sets

with break insulators

making use of 7/3.15 mm

(7/10 SWG) galvanised

steel wire with turn buckle

arrangement as per

approved drawing.

(Excluding excavation o...

For Rabbit ACSR

c) 8mtrs support (400x400x1680mm)

c) 8mtrs support (400x400x1680mm)

PART - B Labour Cost

Releasing of 100KVA

Transformer Complete

Fixing Danger Board

G.I. Barbed Wire (12

Erection of pole 100 to

250 kVA with 9 mtrs. RCC

a) Wiring of One circuit of

LT Wiring Kit for for

25/63/100 KVA DTC to

the existing LT protection

Kit Kit / Distribution Box

via metering box.

a) Fixing of GUY Sets

with break insulators

making use of 7/3.15 mm

(7/10 SWG) galvanised

steel wire with turn buckle

arrangement as per

approved drawing.

(Excluding excavation o...

Providing GI Pipe

Earthing for lightning

arresters Transformer

Neutral and Transformer

Metal parts (Excluding

digging of pits)

Fixing of LT Protection Kit

Fixing LT Distribution box

DTCs (Excluding wiring)

Fixing DOLO cutouts /

Horn Gap Fuses including

fixing of cross arms and

Fixing of 3 Nos lightning

arrestors including wiring

Fixing of GOS including

wiring (11kV SB 200A)

LT Electroic Tri-Vector

Meter 5A, Class-0.5/1.0

LT Metering Box For

Housing ETV Meter with

PART - C Labour Cost

Erection of RCC/PSC

poles 9 to 10 mtr long but

in a pit of 1.8 mtr depth

Loading & unloading of 9

mtr RCC/PSC poles

a) Fixing of GUY Sets

with break insulators

making use of 7/3.15 mm

(7/10 SWG) galvanised

steel wire with turn buckle

arrangement as per

approved drawing.

(Excluding excavation o...

providing spiral earth

electrode type earthing

along with pole (without

charcoal, salt etc.,)

Installation of Insulation

piercing connector for

main to street light Main :

16-95sqmm, Tap : 1.5-

Fixing of Universal Hook

Stringing of 1.1kV grade

aerial bunched 3 core

cable of XLPE insulation

standard aluminum

conductor, standard

around a weather

resistant black XLPE

insulated AAA messenger

wire 1. (3x95) (for ...

Distribution box suitable

Installation of Insulation

piercing connector for

main to service line Main :

25-95sqmm, Tap : 25-

Erection of Anchor Clamp

- 25 to 95 Sq. mm

insulated messenger with

T-connector KZ3 95

Installation of Pre insulated straight thru

joints-MJPT for 25sqmm

End cap for 50/70 Sqmm

Installation of Pre insulated lugs-CPTAU for

Erection of Suspension

Clamp - 25 to 95 sqmm

Pole Clamp-145mmx95

c) 8mtrs support (400x400x1680mm)

Add 5 Percent Area Weightage on Pole Shifting (Material Plus Labour Cost)