138WE/L-56/2020-21

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed.

Material and Labour for screed bed or bedding layer of cement mortar (1:6), 15 mm thick as in floor finishes, complete all as specified and as directed.

Material and Labour for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4, complete all as specified and as directed.

Material and Labour for Non skid coloured ceramic tiles 7 to 8 mm thick area of each tile exc. 0.18 Sqm but n. exc 0.38 sqm, in floor etc, set and jointed in neat cement slury and pointed in white or coloured cement to match, complete all as specified and as directed.

Material and Labour for Coloured Glazed ceramic tiles in vertical surfaces 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match, complete all as specified and as directed.

Demolition stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and as directed.

Material and Labour for Granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite black, complete all as specified and as directed.

Taking down Chowkkats or frames exc. 1.5 Sqm but n. exc. 4.00 Sqm each with shutters (without taking off shutters from the frames), complete all as specified and as directed.

Taking down Chowkhats or frames n. exc. 1.5m each with shutters (without taking off shutters from the frames), complete all as specified and as directed.

Refixing by easing and adjusting including taking down and fixed in same opening of shutters of any description exc 1 Sqm but n exc 2 Sqm each complete all as specified and as directed.

Supply and Fixing anodised aluminium frames for door, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and as directed.

Supply and Fixing anodised aluminium door shutters, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc. complete all as specified and as directed.

Supply and Fixing anodised aluminium window and ventilator shutters, sliding type without sash,aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading screws, anodised aluminium fittings etc. complete all as specified and as directed.

Supply and Fixing Sheet glass 5.5 mm thick, exc 0.5 Sqm in each pane complete all as specified and as directed. Make of Glass: Modi Guard/Saint Gobin/Swastik

Supply and Fixing Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed with stainless steel wire staples complete all as specified and as directed.

Supply and Fixing floor door stopper 150mm long of alluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, complete all as specified and as directed.

Supply and Fixing Extruded aluminium alloy handles, fabricated type, anodised, 150mm, complete all as specified and as directed.

Supply and Fixing Mortice lock, 4 levers, vertical type, size 100mm, complete all as specified and as directed.

Material & Labour for 4mm thick figured glass, pin headed type and glazing with oil putty or aluminium beads fixed to steel etc complete all as specified and as directed

Material and Labour for 9mm thick prelaminated particle board interior grade, prelaminated both side with decorated choice lamination fixed with screws or nails to timber frame work and inserted in Aluminium frame as in shutters/wall panelling etc complete all as specified and as directed.

Supply and Fixing Aluminium (Extruded section) door closer hydraulically regulated designation No 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg and fixed, complete all as specified and as directed.

Demolition of brick or stone masonary including all necessary arches, pillars, quions etc built in cement mortar complete all as specified and as directed.

Material and Labour for Precast cement concrete solid blocks masonry exc 10 cm in width in PCC 1:3:6 type C-1, using 20 mm graded stone aggregate and set in cement motar 1:6 complete all as specified and as directed.

Taking down cement plaster on brick or stone walls, including racking out joints, hacking for key, scrubbing down with water etc.complete all as specified and as directed.

Material and Labour for 15mm thick rendering in CM (1:4) in two layers (10 mm and 5 mm ) mixed with water proofing compound @ 3% by weight of cement in top 5mm thick finishing the surfaces with fair and even without using extra cement complete all as specified and as directed.

Supply only integral water proofing compound as directed.

Material and Labour for Rendering 10mm thick on fair faces of brickwork or concrete surfaces in cement mortar (1:4) finished even and smooth without using extra cement complete all as specified and as directed.

Material and Labour for Rendering 5mm thick on fair faces of brickwork or concrete surfaces in cement mortar (1:3) finished even and smooth without using extra cement, as in ceiling complete all as specified and as directed.

Demolition cement concrete (unreinforced) of any descriptions, in ground floors not exc. 15 cm thick, above or below ground level, complete all as specified and as directed.

Material & Labour for 75mm thick PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) as in plinth protection and finished concrete surface even and smooth without using extra cement including making proper joints with bitumen mastic with sand as per specification at an interval of 3m complete all as specified and as directed.

Dismantling of plain or corrugated steel sheeting , any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and as directed.

Supply and Fixing Prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specfied and as directed.

Supply and Fixing Prepainted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specfied and as directed.

Supply and Fixing roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces cleats etc Fe-410 W (gde E-250) quality complete all as specified and as directed.

Supply and Fixing stairs (framed) including stringers, treades, landing, balusters, hand rails etc including cleats, brackets etc Fe-410 W (gde-E-250) quality complete all as specified and as directed.

Preparation of new steel and iron surfaces , not otherwise described over 10 cm width or grith and applying two coats of synthetic enamel paint over a coat of of red oxide zinc chrome primer complete all as specified and as directed.

Dismantling wall and ceiling boards (fibre,pulp, insulation etc.) or insulation boards / slabs/ blankets, any thickness, including fillets, complete all as specified and as directed.

Dismantling unframed timber scantling 40 sqcm and over in section, in any position, complete all as specified and as directed.

Dismantling unframed timber scantling under 40 sqcm in section, in fillets, rails, posts, rafters, purlins etc at any position, complete all as specified and as directed.

Taking up or down steel tubing and conncection 20 mm, including cleaning for re-fixing or removal to store complete all as specified and as directed.

Taking up or down steel tubing and conncection 15mm, including cleaning for re-fixing or removal to store complete all as specified and as directed.

Supply and Fixing 15mm bore 3 layer PP-R Poly-propylene random copolymer) pipes SDR 7.4 (PN 16) UV stablised and antimicrobial fusion welded having thermal stabilty for hot & cold water supply including all PP-R plain and brass threaded polypropylene random fitting fixed complete to walls, ceiling or in floors etc all as specified and as directed.

Supply and Fixing 20mm bore 3 layer PP-R Poly-propylene random copolymer) pipes SDR 7.4 (PN 16) UV stablised and antimicrobial fusion welded having thermal stabilty for hot & cold water supply including all PP-R plain and brass threaded polypropylene random fitting fixed complete to walls, ceiling or in floors etc all as specified and as directed.

Supply and Fixing 110mm PVC (SWR) pipes double socketed, in any length with rubber ring joints fixed to walls, complete all as specified and as directed.

Supply and Fixing 110mm PVC (SWR) bends any radius with access door, complete all as specified and as directed.

Supply and Fixing PVC (SWR) 110mm bore vent cowl complete all as specified and as directed.

Supply and Fixing PVC (SWR) 110mm bore Junction single (single T), complete all as specified and as directed.

Supply and Fixing PVC (SWR) pipe 75 mm bore single socketed ,in any length with rubber ring joints,laid in trenches or in floors cement complete all as specified and as directed.

Supply and Fixing PVC (SWR) 75mm bore bends any radius with access door, complete all as specified and as directed.

Supply and Fixing PVC (SWR) 75mm bore vent cowl complete all as specified and as directed.

Surface excavation n.exc 30cm deep and avg 15cm deep and getting out in soft /loose soil complete all as specified and as directed.

Excavation in trenches n exc 1.5 m wide and n exc 1.50 m in depth & getting out in any type of soil, complete all as specified and as directed.

Returning filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm in any type of soil complete all as specified and as directed.

Removing excavated soil material n exc 50 m and depositing where directed at a level n. exc 1.50 m above the starting point complete all as specified and as directed.

Material and Labour for hard core of broken stone boulders of guage n.exc 63mm deposited spread and levelled in layers n exc. 15cm thick watered and rammed to a true surface complete all as specified and as directed.

Material and Labour for Plain cement concrete 1:4:8 type D-2 using 40mm graded crushed stone ggregates in foundation, filling and mass concrete, complete all as specified and as directed.

Material and Labour for RCC in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc, basement slabs, under reamed piles and mass concrete with 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) complete all as specified and as directed.

Material and Labour for RCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) as in Slab supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

Material and Labour for RCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) as in Columns pillars, piers, posts and struts etc complete all as specified and as directed.

Material and Labour for RCC 1:2:4, type B-1 (using 20mm graded crushed stone aggregates) Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed.

Material and Labour for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work vertical, or to batter rough finished flat surfaces of concrete complete all as specified and as directed.

Material and Labour for form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick (Horizontal or sloping) in rough finished flat surfaces of concrete complete all as specified and as directed.

Material and Labour for formwork to sides and soffits of floor or roof beam, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc also splays between, floors and beams complete including rough finished flat surfaces, all as specified and as directed.

Material and Labour for form work to sides of pillars, posts, struts, piers, columns and stanchions etc rough finished flat surfaces of concrete square, rectangular or polygonal complete all as specified and as directed.

Material and Labour for mild steel TMT bars 10mm dia and over cut to length bent to shape as required , including crancking bending ,spirally for hooping columns hooking ends and binding with and including mild steel wire not less than 0.9 mm dia complete all as specified and as directed.

Material and Labour for mild steel TMT bars 6 mm to 8mm cut to length bent to shape as required ,as in stirrups and spacers complete all as specified and as directed.

Supply and Fixing in repairs Brass chromium plated bottle traps 32mm for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union, cap and fixed, complete all as specified and as directed.

Material and Labour for Preparing newly plastered surfaces of external walls and applying two coats of cement base paint, complete all as as specified and as directed.

Material and Labour for preparing newly plastered surfaces of internal walls and applying three coats of white wash complete all as as specified and as directed.

Material and Labour for Preparing newly plastered surfaces of ceiling and applying three coats white wash complete all as specified and as directed.

Material and Labour for Roughning surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust and brushing neat cement slurry with 3.0 Kg of cement per Sqm, complete all as specified and as directed.

Material and Labour for screed bed or bedding laying of cement mortar (1:6), 20 mm thick as in floor finishes, complete all as specified and as directed.

Material and Labour for PCC 1:2:4, (type B-1) 40mm thick, using 20mm graded crushed stone aggregate as in flooring and finished surface even and fair using extra cement complete all as specified and as directed.

Material and Labour for 3 mm thick glass dividing strip and width of 38 mm for PCC flooring complete all as specified and as directed.

Supply and Fixing Bib taps, 15mm bore, fancy type, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and as directed.

Supply and Fixing Stop valves 15mm bore, cast copper alloy, fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipes or for unions and fixed, complete all as specified and as directed.

Supply and Fixing PVC connections 15mm size with PTMT nuts of length 600mm, complete all as specified and as directed.

Supply and Fixing PVC towel rail 600mm long fixed with and including chromium plated brass screw and wooden/plastic clits(minimum weight 190 grms), complete all as specified and as directed.

Supply and Fixing Grating square 150mm size of PTMT (Min weight 100 grms), complete all as specified and as directed.

Supply and Fixing PVC floor trap 75mm dia, plain with grating including jointing with solvent cement, complete all as specified and as directed.

Material and Labour for Preparing old plastered surfaces of walls, washing rubbing down and stopping of distempered and painted surfaces and applying two coats of cement base paint, complete all as specified and as directed.

Supply and Fixing Harrison rails (Curtain rods), anodised aluminium alloy, with fixing brackets, stops, rollers etc complete all as specified and as directed.

Material and Labour for 2nd class soft wood 25mm thick boarding in floors and skirting planed one side and edges tongued and grooved or rebated fixed with screws complete all as specified and as directed.

Material and Labour for PCC 1:2:4, (type B-0) 25mm thick (using12.5mm graded crushed stone aggregates) as in flooring and finished surface as in levelling course complete all as specified and as directed.

Demolition cement concrete (unreinforced) of any descriptions and in any position not otherwise specifically provided for complete all as specified and as directed.

Material and Labour for cement concrete 1:3:6, type C-1, (Using 20mm graded crushed stone aggregates), in surface channels and drains, complete all as specified and as directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement including forms, moulds, mitred/stopped ends etc, complete all as specified and as directed.

Material and Labour for screed bed or bedding layer of cement mortar (1:4), 15 mm thick as in floor finishes, complete all as specified and as directed.

Material and Labour for Joint free Ceramic coloured tiles 7 to 8 mm thick area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and as directed.

Material and Labour for Joint free Ceramic coloured tiles 7 to 8 mm thick area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm, as in skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and as directed.

Material and Labour for rendering 10mm thick in cement mortar 1:6 on fair faces of brick walls or on concrete surfaces, finished even and smooth,without using extra cement complete all as specified and as directed.

Material and Labour for Preparing newly plastered surface and AC board of ceiling and applying three coats white wash complete all as specified and as directed.

Material and Labour for 6 mm thick plywood, grade BWR, type BB,fixed to timber frame work in repairs with nails as in ceiling complete all as specified and as directed

Material and Labour for 2nd class soft wood plain fillets , square rectangular or traingular in section clean sawn, secured with nails , in repair works, area exc 13 Sqcm but n.exc.25 Sqcm, complete all as specified and as directed

Taking down shutter of any description exc 1.00 Sqm but n'exc 2.00 Sqm in each Complete all as specified and as directed.

Taking down shutter of any description n'exc 1.00sqm in each Complete all as specified and as directed.

Supply and Fixing sheet glass ordinary quality 4mm thick glazing in square/ rectangle n. exc 0.50 sqm each pane with oil putty or aluminium/wooden beads fixed to steel/wood etc complete all as specified and as directed.

Supply and Fixing pressed steel door frame 105x60 mm with one or more rebate including necessary fixing lugs hinges, lock strick plate, etc complete all as specified and as directed.

Material and Labour for PCC 1:2:4 type B-0 (Using 12.5mm graded crushed stone aggregate) as in filling of pressed steel frame complete all as specified and as directed.

Material & Labour for treating small article such as stops, covers, gully, gratings and hold fast ends & post backs of chowkat etc tarred area n exc 0.10 Sqm each complete all as specified and as directed.

Supply and Fixing shutters 35 mm thick 2nd class soft wood plain, framed, panelled shutter (any number of panels), with panels of timber flat on both sides (feathered edged) or of veneered particle board medium density, wood particle board with commercial face veneers complete all as specified and as directed

Supply and Fixing shutters 30 mm thick 2nd class soft wood glazed and skeleton shutter open and rebated and prepared to receive glass gauze etc edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc size of numbers of shutter as specified in SSR Part I Section 8, clause 8.24 (b) as in window, ventilators complete all as specified and as directed.

Material and Labour for applying two coats Synthetic Enamel Paint over a coat of pink primer on previously untreated wooden surface of any description over 10 cm in width or girth not otherwise described including preparation of surface etc. complete all as specified and as directed.

Supply and Fixing 100 mm long aluminium anodised barrel tower bolt complete all as specified and as directed.

Supply and Fixing 150 mm long aluminium anodised barrel tower bolt complete all as specified and as directed.

Supply and Fixing 100 mm long aluminium handle fabricated type anodised complete all as specified and as directed.

Supply and Fixing 150 mm long aluminium handle fabricated type anodised complete all as specified and as directed.

Supply and Fixing 100 mm long, butt hinges, medium weight cold rolled mild steel complete all as specified and as directed.

Supply & Fixing 75mm long,butt hinges, medium weight cold rolled mild steel complete all as specified and as directed.

Supply and Fixing 300 mm long Aluminium sliding door bolts with hasp and staple(bolt type) and fixing clips of sheet,caste or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium and fixed. complete all as specified and as directed.

Supply and Fixing in repair Vitreous china wash hand basin size 550x400mm (flat back or angle back type) including 32mm dia brass chromium plated waste fittings a pair of cast iron bracket duly painted /erecting stand including cutting and pinning in ends making good to disturbed surfaces in CM 1:3 including taking down unserviceable wash hand basin and connected items of any description, complete all as specified and as directed.

Supply and Fixing in repairs Vitreous China squating Pan Orissa pattern of size 580 x 440 mm white with integral foot rest excluding flushing cistern in repair complete all as speified and as directed.

Supply and Fixing in repairs PVC low level flushing cistern, white, 10 ltrs capacity with float valve and brackets complete including fixing low level flush pipe after dismantling of old unserviceable existing flushing cistern complete all as specified and as directed.

Supply and Fixing in repair 15mm bore dia pillar taps, fancy type chromium plated with capstan heads chromium plated screwed down high pressure, with or without letter 'hot' or 'cold' with long screwed shank and fly nuts screw for iron pipe complete all as specified and as directed.

Supply and Fixing 15mm Bore PTMT Stop Cock of any colour screwed for iron pipe and fixed (minimum weight 15mm-90gms) in repair complete all as specified and as directed.

Supply and Fixing in repairs brass chromium plated Tubular towel rail , 20mm dia, 60cm long between flanges complete all as specified and as directed.

Supply and Fixing Rotational moulded polyethene water storage tanks 1000 litre capacity with lid (cylindrical vertical with closed top) hoisted and fixed in position including inlet and out let pipe, wash pipe all as specified in SSR part-I , including dismantling water tanks complete all as directed by Engr-in- Charge

Supply and Fixing 20mm dia Ball brass valve high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed in repairs complete all as specified and as directed.

Supply and Fixing 20mm bore PP-R Gate valves (brass insert) as per as per requirement at the site complete all as specified and as directed.

Taking down eaves gutters and rainwater pipes (any size or pattern ),including all fittings,heads,shoes,bends,swan necks etc.including cleaning, refixing or removal to store, complete all as specified and as directed

Supply and Fixing PVC (SWR) pipe 110 mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and as directed.

Supply and Fixing PVC (SWR) 75mm bore Junction single (single T), complete all as specified and as directed.

Material and Labour for chequered cement concrete tiles 300mm X 300mmX 20mm thick set, jointed and pointed in neat cement slur, with grey cement and pigment, laid in floors, over and including 20 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.

Supply and Fixing 2nd class hardwood in plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and as directed.

Material and Labour for wooden floor tiles 7 mm thick with dove tailed joints laid over 150 micron polythene film and 3 mm thick foam as per manufacturer's instructions including taking down of old wooden flooring and fixed with decorative wooden beadings as per site requirement complete all as specified and as directed. Make: Action Tessa or Equivalent. Note: Shade of the tile to be approved by GE.

Taking down carefully aluminium / copper point wiring light/fan/socket or power complete including unscrewing from board fitting and fixture such as switches, sockets, ceiling roses, lamp holders, brackets, pendent holder , light fittings , regulators, distribution/ Meter boards, MCBs etc and making good the distturbed surface matching with existing specifications complete all as specified and directed.

Taking down existing main switches and DBs including MCBs complete and removing material from site of work and making good to the disturbed surface of wall, floors etc complete all as specified and as directed.

Point wiring for one light point or fan point controlled by one switch with 1.50 Sqmm, PVC insulated, unsheathed, FRLS single core, multi-stranded, copper conductor cable, 1100 Volts fire resistance ISI, drawn in and including PVC casing and capping, fire resistance, ISI marked, fixed surfaces of walls and ceilings, terminated in and including rectangular PVC board for mounting fitting/ switches/ sockets and 1.50 Sqmm, copper conductor, multi-stranded, FRLS as earth continuity wire connected to earth terminal, including making good to disturbed surface as matching to existing descriptions/ specifications, complete all as specified and as directed.Make : Havells/ Polycab/Finolex

Description all as per serial item No- 134.00 here-in-before but for 5 Amps 3 Pin Socket outlet on same board, complete all as specified and as directed.

Description all as per serial item No- 134.00 here-in-before but for 5 Amps 3 Pin switch socket outlet on independent board, complete all as specified and as directed.

Point wiring for 3-pin, 15 Amps, socket outlet on independent board with 2.5 Sqmm, PVC insulated, unsheathed, FRLS single core, multi-stranded, copper conductor cable, 1100 Volts, drawn in and including PVC casing and capping, fire resistance, ISI marked, fixed surfaces of walls and ceilings, terminated in and including rectangular PVC board for mounting fitting/ switches/ sockets and 1.5 Sqmm, copper conductor, multi-stranded, FRLS as earth continuity wire connected to earth terminal, including making good to disturbed surface as matching to existing descriptions/ specifications, complete all as specified and as directed.

Supply and Fixing in replacement switch piano flush type one way single pole 5 Amps 240 Volts Complete all as specified and as directed. Make Anchor/ Havells / Cona.

Supply and Fixing in replacement socket outlet 3 pin, 5 Amps flush type 240 volts Complete all as specified and as directed. Make Anchor/ Havells / Cona.

Supply and Fixing in replacement switch socket combination 2 in 1 , 3 pin 5 Amps flush type universal ISI marked Complete all as specified and as directed. Make Anchor/ Havells / Cona.

Supply and Fixing switch socket outlet 2 in 1 , 3 pin and 5 Amps and 15 Amps piano flush type single pole ISI marked Complete all as specified and as directed. Make Anchor/ Havells / Cona.

Supply and Fixing in replacement ceiling rose 3 phase/ PVC/Polycarbonate isolated body two or three terminal Complete all as specified and as directed.

Supply and Fixing in replacement Surface/ Wall mounted LED fittings with LED tube 18 Watts capacity decorative ultra slim elegence LED lighting ficture with extruded aluminium heat sink, environmental friendly, energy efficient type 4 feet long channel type bracket including necessary connection prewired and making connection with 3 core copper flexible cable of appropriate size from ceiling rose / PVC connector to light fittings complete all as specified and as directed. Make: Havells Model 18W LED 6000K or equivalent in Syska/ Phillips/CG.

Supply and Fixing in replacement 30 Watt 6500K LED Flood light Energy Saving and environmental friendly IP65 protection and impact resistance of two with complete accessories complete all as specified and as directed. Make: Havells/ Bajaj /CG.

Supply and Fixing in repair lamp holder PVC/ Polycarbonate type insulated body with back plate suitable for batten fittings complete all as specified and as directed.

Supply and Fixing in repair LED lamp 7 Watt 230 Volts complete all as specified and as directed.Make: Phillips/ Bajaj /CG.

Taking down old unserviceable all types of electrical wiring (Main / Sub Main cable) from existing site complete all as specified and as directed.

Supply and Fixing wiring PVC caping casing circuit/ submain wiring alongwith earth wire with the sizes 4 x 10 Sqmm and 2 x 6 Sqmm of FRLS PVC insulated copper conductor, single core cable in surface / recessed as required complete all as specified and as directed.

Sub main wiring for circuit/ submain wiring alongwith earth wire with two run of 10.0 Sqmm of fire resistance, PVC insulated copper conductor, single core cable, multi stranded, FRLS, ISI marked, 1100 Volts grade and one run of 6.0 Sqmm, FRLS, PVC insulated copper conductor, single core cable, multi stranded, ISI marked, 1100 Volts grade as earth wire connected to earth terminal, drawn in and including PVC casing and capping, fire resistance, ISI marked, fixed on surfaces of walls/ ceilings, including making good to disturbed surface matching to existing descriptions/ specifications, complete all as specified and directed.Make: Havells/ Plaza/ Finolex.

Taking down old unserviceable LT underground XLPE Cable from pole to building complete all as specified and as directed.

XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) with multi-standard aluminium conductor, 1100 volts grade, cross sectional area 16 Sqmm 4.0 core, laid in trenches or passing through pipes, including making necessary connections at both ends, complete all as specified and directed.

Supply and Fixing Sheet metal enclousers Triple pole and neutral DBs with 200 Amps rated bus bar of 4 way 415 volts with back plate complete with double door complete all as specified and as directed.Make: Havells/ ABB/ Legrand.

Supply and Fixing Sheet metal enclousers SPN DBs with 200 Amps rated bus bar of 12 way 240 volts with back plate complete with double door complete all as specified and as directed.Make: Havells/ ABB/ Legrand.

Supply and Fixing Sheet metal enclousers SPN DBs with 200 Amps rated bus bar of 8 way 240 volts with back plate complete with double door complete all as specified and as directed.Make: Havells/ ABB/ Legrand.

Supply and Fixing Sheet metal enclousers SPN DBs with 200 Amps rated bus bar of 4 way 240 volts with back plate complete with double door complete all as specified and as directed.Make: Havells/ ABB/ Legrand.

Supply and fixing MCB 'C' series TPN 63 Amps 415 volts complete all as specified and as directed.Make Havells/ Legrand/ ABB.

Supply and fixing MCB 'C' series SPN 63 Amps 240 volts complete all as specified and as directed.Make Havells/ Legrand/ ABB.

Supply and fixing MCB 'C' series SPN 32 Amps 240 volts complete all as specified and as directed.Make Havells/ Legrand/ ABB.

Supply and fixing MCB, Single Phase (SP) 6-32 Amps 240 volts complete all as specified and as directed.Make Havells/ Legrand/ ABB.

Supply and fixing Exhaust Fan of 200 mm sweep non metallic range complete all as specified and as directed.Make Havells/ Bajaj/ Orient. Note : Old Exhaust fans will be deposited by the contractor to MES store yard.

Earthing complete with galvanized steel earth plate electrode 600x600x6mm buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of earth plate not less than 1.5mtr below normal ground level, connected with galvanized iron wire 4.0mm dia as earth lead means of bolts, nuts, check nuts and washers of galvanized iron or steel complete with 15 mm dia GI light grade protection pipe, 20mm dia GI medium grade watering pipe with funnel including charcoal, dust, salt, PCC M-15, type B-1 in pit with precast RCC M-15(1:2:4), type B-1(using 20mm graded crushed stone aggregates) in cover reinforced with XPM not less than 4.0 Kg per Sqm, test point etc. all as shown in electric plate No-3 of SSR Part-I (2009), complete with necessary earth work in any type of soil, removal to a distance not exceeding 50mtr, including testing on completion, complete all as specified and as directed. Note : The cost of excavation and earth work, PCC pit and pit covers, funnel and watering pipe, wire mesh, charcoal dust and common salt, 15mm dia, light grade, GI pipe as protection to earth lead and earth lead as 4.0mm dia GI wire (main earthing lead from earth electrode to test point length not less than 7.5mtrs) shall be deemed included in the unit rate for earthing.

M/S SHAMSHER ALI SUFI

SUMEET TRADING CORPORATION

Rampal Singh Contractor

Mehar Enterprises

VIJAY ENTERPRISES