Gram mainthna mai tempo stand par pawan ke makan se maithna public school tak interloking tile karya

Construction of earth work with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading,and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1.

Construction of Granular Sub Base (GSB) providing well graded Mterial spreading in uniform layer with tractor mount grader on prepared surface mixing by mixing in place method with Rotavator at OMC , and compacting with smooth wheel roller to achieve the desired density , complete as per clause 401 by mix in place method, laying, spreading Material on a prepared Sub base

Providing, laying.G 3 spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading as per technical Specification Clause 405

Brick masonry work in cement mortar in foundation complete excluding pointing and plastering as per drawing and technical specifications Clauses 600, 1202 & 1203 in 1:4 mortar

Cement concrete with 20 mm gauge stone grit, coarse sand & cement in the proportion of 4 :2:1 including supply of all materials, labour , T & P etc. required for proper completion of the work as per S.I. No. 279(a).

12 cm thick plaster with cement and coarse sand in 1:4 over brick work minimum thickness not to be less than 1cm including supply of all materials, labour, tools & plants etc. required for proper completion of the work. As per SI No. 613 & 1204

Supply &Laying of Gray 80mm thick I shaped mechanical compressed interlocking cement concrete paver block Rubber mould with compressive strainth shall not be less then 40 MPA & 4.5 KG Per no i/c all complete with Fine sand 4 cm thick as per s.i no 20.38 New item ( Grey)

Supply and fixing og M.S sign board made up of 4x40x6 mm angle (vertical post of length 2.75 meter ), 40x5 mm flat cross angle 1 mm thick M.s. Sheet (1.20x.90 sq m)including excavation of pit (0.45x0.45x0.45 cum m), cement concrete 10:5:1 ten brick ballast, five fine sand & cement 10 cm thick ,cast cement concrete 1:2:4 mortar cement , coarse sand and 20 mm size stone grit (0.35x0.35x0.35), Two coat painting layer latter writing up to 2.50 size (225 Nos) etccomplete as per direction of engineer -in-charge.