Upgradation and Strengthening works in Department of Forensic Medicines and Toxicology GMC Jammu including construction additional space for Museum hall and additional space for Laboratory for Under-graduate Training and Teaching Purposes Civil work

Engageg carpenter for removal and refixing of doors

12mm cement plaster of mix 1:4(I cement :4 fine sand)

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete 1mm thick

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade two or more coats on new work

Dismantling tile work in floor and roofs laid in cement mortar including stacking material within 50meter lead for thickness of tiles above 25mmand upto 40mm

Providing and laying damp proof course 50mm thick with cement concrete 1:2:4and curing complete

Providing and fixing PVC pipe including jointing and sealing

Providing and fixing PVC fitting accessories

75mm plain tee

110mm plain bend

110mm plain tee

110mm to 75mm reduction socket

Providing and fixing aluminium work for doors ,windows ,ventilators and partitions with extruded built up standard tubular section /appropriate Z sections and other sections of approved make conforming to IS :733 and IS :1285 ,fixed with dash fastner of required dia and size including necessary filling up of gaps at junctions i.e , at top ,bottom and sides with required EPDM rubber /neoprene gasket felt etc. aluminium sections shall be smooth ,rust free,straight ,mitred and jointed mechanically wherever required including cleat angle ,aluminium snap beading for glazing /panelling ,C.P brass/stainless steel screws ,all complete as per architectural drawings and the directions of engineer in charge (glazing ,panelling and dash fasteners to be paid for separately).

For fixed portion powder coated aluminium (minimum thickness of powder coat 50 microns )

For shutters of doors ,windows & ventilators including providing and fixing hinges /pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber /neoprene gasket required (fittings shall be paid separately ).Powder coated aluminium 50 microns.

providing and fixing glazing in aluminium door window ventilator shutter and partitions etc. with EPDM rubber /neoprene gasket etc. complete as per the architectural drawings and the directions of engineer in charge with float glass panes of 5 mm thickness weight not less than 12.5kg/sqm

Extra for providing frosted glass panes 4 mm thick instead of ordinary float glass panes 4 mm thick in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured).

providing and fixing aluminium fitting

sliding Bolt

tower Bolt 200mm

Renewing glass panes, with wooden fillets wherever necessary :Float glass panes of thickness 4.0 mm wt not less than 10kg/sqm

Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : Flamed finish granite stone slab Jet Black, Cherry Red

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours and shades, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement and matching pigments etc. complete 600x600mm

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand)including grouting the joints with white cement and matching pigments etc. complete . Size of tile 600x600 mm

providing and fixing roller blinds incl cost of fittings (Superior Quality)

Providing and laying gang saw cut of specified thickness, mirror polished pre- moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-inCharge. 18 mm thick

Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia.0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : Second class deodar wood (30 mm)

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Second class deodar wood

Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required0.63 mm thick with zinc coating not less than 275 gram/m

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Second class deodar wood. 35 mm thick

Providing and fixing fly proof wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions all complete. With Galvanized M.S. Wire gauge with wire of dia 0.63 mm

Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws (35mm)

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.: Internal work (Parkash, Suyra Make) or equivalent 20 mm dia. nominal bore (Medium)

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work) (Uniqu/DRP make) 20 mm nominal bore

Providing and fixing PVC pipe including / jointing with seal ring (Finolex / Supreme) of pressure @ 4kg 75mm dia pipe

Providing and fixing PVC floor trap of Finolex / Supreme OR equivalent

Providing and fixing one piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white P.V.C automatic flushing cistern, with fittings, standard size G.I./ PVC flush pipe for back and front flush with standard spreader pipes with fittings, G.I clamps and in C.P brass coupling complete, including painting of fittings and cutting and making good the walls and floors etc. wherever require Single squatting plate with 5 liter P.V.C. automatic flushing cistern.

Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required : White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap.

P/F PVC conection 450 mm long

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete: Flexible pipe 32 mm dia

Providing and fixing C.P fittings 15mm nominal bore and fixtures (jaquar/cera or equivalent)

Short nose bib cock)

Long nose bib cock (kb1211033)

Angle valve

C.P gratings 4"

Soap dish

C.P. towel rod 2'-0"

Towel ring 200 mm dia

cp jet

handle 200mm

handle 150mm

tower bolt 150mm

tower bolt 100mm

Providing and fixing 19mm thick ply with fevicol and nails complete job

Providing and fixing superior quality of 1mm thick mica including grooving and fevicol nails complete job

Providing and fixing sliding bolt 300 mm

Providing and fixing aluminium fitting door closer

Providing and fixing 6mm Waterproof ply

providing and laying cement concrete 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) All work upto plinth level

Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 4 ( 1 cement : 4 fine sand)

Providing and fixing white vitrous china pedestal type water closet (Hindware/Cera/Parryware make) (European type W.C Pan) with 100mm PVC P&S trap incl. cutting and making good the walls and floors wherever required

Disposal of mulba uncluding loadind and unloading job complete

Engage Labour for dismentling and shifting of mulba from basement to ground floor dumping site and shifting of construction material from outer area to working site

Engage Plumber

Engage Welder with hire charges of welding set

Engage Sweeper

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board 510x1040mm bowl depth 225mm

Providing and dixing cup bords/Almirah frame and shutters with 6mm thick ply fixed over 19mm thick ply of supeior quality with decorative mica fixed on outer side of almirah of superior quality and plain mica of superioe quality on inner side of almirah shutters complete incluidn internal boxes / partitions with 19 mm thick ply of superior quality wherever required decorated with plain mica/enamel/emulsion complete wherever required including all fittings and fixtures as directed by Enginer-in-charge (complete job)

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes

Half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 in foundations and plinth including curing in : Cement mortar 1:4 ( 1 cement : 4 coarse sand)

Extra for half Brick masonry in superstructure above plinth level upto floor V level

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work