Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.3 LAccepted-Finance | L1 | Accepted-Finance Accepted | |
| 2 | L2₹3.9 L+₹63,783.80 (19.4%)Accepted-Finance | L2 | Accepted-Finance Accepted |
Tender Value
₹4.5 L
EMD Value
₹8,989
Closing Date
16 Mar 2023, 3:00 pmClosed
EE/RCD/APWD/WG
EE/RCD/APWD/WG
AR and MO Non Residential Building under Ferrargunj Sub Division, RCD, APWD, Wimberly Gunj during 2022-23. S.W Repair and Renovation of Mini Stadium at Ferrargunj.
2023_APWD_9531_1
NIT No. 126/EE/RCD/APWD/WG/22-23
Open Tender
Civil Works - Others
Item Rate
60 days
EE/RCD/APWD/WG
Please refer Tender documents.
5 documents required · 5 mandatory
₹0
₹8,989
17 Mar 2023
27 Feb 2023
17 Mar 2023
27 Feb 2023
16 Mar 2023
3 Mar 2023
Amount
Surface dressing of the ground including removing vegetation and in- equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m.
All kinds of soil
Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :
Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade :
Old work (one or more coats)
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :
One or more coats on old work
Finishing walls with Acrylic Smooth exterior paint of required shade :
Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface
Melamine polishing on wood work (one or more coat).
Providing and fixing P.V.C. low level flushing cistern with manuallycontrolled device (handle lever) conforming to IS : 7231, with all fittingsand fixtures complete.
10 litre capacity - White
Providing and fixing P.V.C. waste pipe for sink or wash basin includingP.V.C. waste fittings complete.
Flexible pipe 32 mm dia
Providing and fixing 600x450 mm beveled edge mirror of superiorglass (of approved quality) complete with 6 mm thick hard boardground fixed to wooden cleats with C.P. brass screws and washerscomplete.
Providing and fixing PTMT towel rail complete with brackets fixed towooden cleats with CP brass screws with concealed fittingsarrangement of approved quality and colour.
600 mm long towel rail with total length of 645 mm, width78 mm and effective height of 88 mm, weighing not lessthan 190 gms.
Providing and fixing uplasticised PVC connection pipe with brass unions :
45 cm length 15 mm nominal bore
Providing and fixing brass bib cock of approved quality
15 mm nominal bore
Providing and fixing brass stop cock of approved quality
15 mm nominal bore
Providing and fixing PTMT pillar cock of approved quality and colour
15 mm nominal bore, 107 mm long, weighing not lessthan 110 gms
Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet
150 mm diameter
Providing and fixing Angular Stop Cock with wall flange of make stainless steel as per the direction of engineer in- charge.
15 mm nominal bore
Providing and fixing louvers in ventilators with frosted glass 5mm thick including cutting into shape and placing with frames of Anodized Colour Aluminium Louver Glass Holder for 5mm as per direction of Engineer-in-charge
Providing and fixing eye hook ISI marked anodic coating not less than grade 10 as per ISI 868 transparent or dyed top required colour or shade with necessary screws etc complete.
Providing and fixing 35 mm thick pannelled, glazed or pannelled & glazed shutters for doors including anodised aluminium butt hinges with necessary screws and panelling with 12mm thick marine ply (BWR) conforming to relevant specification complete with wooden cleats & blocks as directed by Engineer in charge
With Kiln Seasoned Chemically treated Superior Hard Wood Cat -II(A).
A K CONSTRUCTION
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .