Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹40.0 LAccepted-AOC | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹41.4 L+₹1.5 L (3.69%)Rejected-Finance | L2 | Rejected-Finance Not Lowest Bidder | |
| 3 | L3₹42.0 L+₹2.0 L (5.03%)Rejected-Finance OPP MARUTI SERVICE CENTRE SARACHARMA POST SRI VIJAYA PURAM 744 105 | SRI VIJAYA PURAM | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744105 | L3 | Rejected-Finance Not Lowest Bidder | |
| 4 | L4₹42.6 L+₹2.6 L (6.49%)Rejected-Finance | L4 | Rejected-Finance Not Lowest Bidder | |
| 5 | L5₹43.4 L+₹3.4 L (8.50%)Rejected-Finance | L5 | Rejected-Finance Not Lowest Bidder |
Tender Value
₹40 L
EMD Value
₹90,000
Closing Date
28 Mar 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE BRICHGUNJ
GE BRICHGUNJ, Port Blair
DAY TO DAY MISC REPAIR AND MAINTENANCE OF BLDG OF OFFRS , JCOS and ORS MD ACCN AT RANJIT VIHAR UNDER AGE BR II OF GE BRICHGUNJ PORT BLAIR
2024_MES_645619_1
8443A
Open Tender
Civil Works
Item Rate
330 days
GE BRICHGUNJ
As Per NIT
9 documents required · 9 mandatory
₹500
GE Brichgunj
₹90,000
Yes
22 May 2024
8 Mar 2024
30 Mar 2024
8 Mar 2024
28 Mar 2024
23 Mar 2024
Amount
Dismantling Structural Steel as in grills, gratings etc
S&F framed work such as grill gratings etc with ends of bars riveted forged into spikes guard bars barred iron fixed independently in wooden frames and similar work confirming to Fe-290 Gde- 165 , complete all as specified and as directed by Engineer-in-Charge.
Preparing new steel surface of any discription, n exc 10 cm in width or girth,and applying two coats of synthetic enamel paint over a coat of red oxide primer
M&L for preparation of new steel surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by Engineer -in-Charge.
M&L for preparation of old steel surface of any description over 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed.
Demolition of RCC in slabs, shelfs,chajjas, fins, fascia column edges including cutting reinforcement etc, complete all as specified and as directed by Engineer -in-Charge.
M&L precast cover slabs type B1 1:2:4 (20mm graded agg) (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain face
Use and waste of Form work to flat surfaces of RCC fins, fascia ,chjjas and similar items including edges, for fair finished surfaces complete all as specified and as directed by Engineer -in-Charge.
M & L for RCC M-30 (using 20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like etc,complete all as specified and as directed by Engineer -in-Charge.
M & L for RCC M-30 (using 20mm graded stone aggregate) as chajjas etc,complete all as specified and as directed by Engineer -in-Charge.
M&L for mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips, complete all as specified and as directed by Engineer -in-Charge.
Demolition of cement concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level)as in plinth protection etc complete all as specified and as directed by Engineer -in-Charge.
M&L for 75mm thick Plain cement concrete (1:3:6) type C2 using 40mm graded stone aggregate as in plinth protection, laid in panels and finishing fair and even, including necessary form work complete all as specified and as directed by Engineer -in-Charge.
Taking up or down, and refixing of 15 mm bore, GI tubing, medium grade,in new or old positions including cleaning for refixing complete all as specified and as directed by Engineer -in-Charge.
M & L for water proofing treatment with the following specifications including taking down existing roof treatment of any description and cleaning with water and scrubbing and disposing off the rubbish outside the premises, complete all as specified and as per manufacturers instructions:- (i) Rendering 10mm thick in CM 1:4 on concrete surfaces mixed with water proofing compouund @ 3% by weitht of cement as leveling course (ii) Apply a coat of hot blown bitumen 85/25 @ 1.20 kg/sqm over a coat of bituminous primer @ 0.3 ltr per sqm. (iii) Laying APP membrane (STP Aquashield or equivalent) weighing not less than 3.5 Kg/sqm, reinforced with polyster non woven fabric (weighing not less than 150 gms/sqm) with 100mm over laps both longitudinally and transversally and overlaps shall be sealed by torch, membrane shall be taken to the parapet through fillet and shall be tucked in inside after a height of 300 mm. (iv) Apply one coat of hot blown bitumen 85/25 @ 1.2 kg/sqm over the membrane. Note :- Water proofing compound shall be measured and paid separately.
M&L for rendering 10mm thick in CM 1:4 on fair faces of brick or concrete wall surfaces finished smooth and even mixed with water proofing compound @ 3% by weight of cement or as per manufacturers instructions complete all as specified and as directed by Engineer - in -Charge. (Note:- Water proofing compound shall be measured and paid separately)
Dismantling of plain or corrugated steel sheeting of any gauge, thickness, including nainital or similar pattern roof covering, complete all as specified and as directed by Engineer - in - Charge.
M&L for prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws or L'or 'J' type look , complete all as specified and as directed by Engineer -in-Charge.
M&L for prepainted galvalume aluminium zinc coating GI based plain sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in ridges, valleys hips etc fixed with self tapping screws or L'or 'J' type look , complete all as specified and as directed by Engineer -in-Charge.
Dismantling of mild steel work of any description not otherwise specifically provided for complete all as specified and as directed by Engineer -in-Charge.
S & F Mild Steel work in tubular trusses and tubular posts/ purlins including special shaped washers etc., complete using ERW or induction butt welded tubes conforming to IS :1161-1979 grade st-240 including notching, drilling, fitting, riveting and/or welding or connecting with bed plate, bolt and nuts complete all as specified and as directed by Engineer -in-Charge.
S & F rolled mild steel structural steel work of angle, channel etc. confirming to Fe-410-W (grade E 250) quality 'A', fixed as in purlins, brackets etc,complete all as specified and as directed by Engineer -in-Charge.
S&F mild steel flat iron as in supports for wind ties, wall ties, clamps and similar small articles conforming to Fe 290 Gde-E-165 complete all as specified and as directed by Engineer -in-Charge.
Demolition of cement concrete of any description and in any position incl floor tiles etc complete all as specified and as directed by Engineer-in-Charge.
M&L for 15mm thick rendering in CM 1:3 on fair faces of brick or concrete surfaces, finished even and fair in sunken floor using water proofing compound all as per manufacturers instructions etc, complete all as specified and as directed by Engineer-in-Charge.
M&L for PCC 1:5:10 type E2 (using 40mm graded aggregates) for filling and mass concrete in sunken floor, complete all as specified and as directed by Engineer-in-Charge.
M&L for applying for a evenly tack coat of industrial bitumen 85/25 at the rate of 1.2 kg/sqm in sunken floor including cleaning surfaces complete all as specified and as directed by Engineer-in-charge.
M&L for providing PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in sub base of flooring of 40 mm thick, complete all as specified and as directed by Engr-in-Charge.
Dismantling of floor, hearth or wall tilling incl cement mortar bedding (but not backing) and removing the rubbish off the premises complete all as specified and as directed by Engineer -in-Charge.
M&L for glazed, polished chequered cement concrete tiles 300 x 300mm x 25mm thick, set, jointed and pointed in neat cement slurry, including screed bedding layer in cement mortar 1:6, 20mm thick, in flooring, complete all as specified and as directed by Engineer-in-Chief.
M&L for coloured non skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.06 sqm n.exc 0.11 sqm, in floors etc set and jointed in neat cement slurry in floors and pointed with coloured cement to match the colour of tiles incl screed bed or bedding layer of mortar 20 mm thick in CM 1:6 for laying floor finishes complete all as specified and as directed by Engineer -in-Charge.
M&L for coloured non skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.11 sqm n.exc 0.18 sqm, in floors etc set and jointed in neat cement slurry in floors and pointed with coloured cement to match the colour of tiles incl screed bed or bedding layer of mortar 20 mm thick in CM 1:6 for laying floor finishes complete all as specified and as directed by Engineer -in-Charge.
S & F coloured joint free non-skid ceramic tiles 7 to 8mm thick (square) area of each tile exceeding 0.18 but not exceeding 0.38 sqm, in floors etc. set, jointed and pointed in white or coloured cement to match over screed bed in cement mortar 1:4, 15 mm thick, all as specified and directed.
M&L for coloured glazed ceramic tiles 300 X 200 X 7mm thick as in dado/skirting set and jointed in neat cement slurry and pointed with coloured cement to match the colour of tiles over and including rendering 10mm thick in CM 1:4 on wall surfaces complete all as specified and as directed.
M&L for coloured glazed ceramic tiles 300 X 450 X 7mm thick as in dado/skirting set and jointed in neat cement slurry and pointed with coloured cement to match the colour of tiles over and including rendering 10mm thick in CM 1:4 on wall surfaces complete all as specified and as directed.
M & L for granite slab 20 mm thick as in cooking platforms, bedded 20 mm thick ,in cement mortor 1:6 and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing complete all as specified and as directed by Engineer-in-charge
Dismantling of boarding, of any thickness any type and in any position with nails/ screws, complete all as specified and as directed by Engineer-in-Charge.
S&F second class hard wood weather boarding 20mm thick plained one side with butt joints as in eaves board complete all as specified and as directed by Engineer -in-Charge.
M&L in repairs for false ceiling with aluminium grid work (size of grid 605x605mm) with 35x25x1.5mm main tee and 25x25x1.4mm, cross tee and wall angle and suspended with 3.15mm dia, GI wire, hooked to roof with needful adjustment bolts at an interval of 1.20m, centre to centre staggered and board with Eco board, decorative type, size 600x600x4mm thick, finished with two coats of oil bound distemper over a coat of primer on exposed surfaces, complete all as specified and as directed by Engineer-in-Charge.
S&F in repairs Eco board 600 X 600 X 4mm thick decorative type fixed in aluminium frame work with screws or nails etc including two coats of oil bound distemper over a coat of primer complete all as specified and as directed by Engineer-in-Charge.
Demolition of block masonrywork set in cement mortar of any description complete all as specified and as directed by Engineer-in-Charge.
M & L precast cement concrete block masonry (1:3:6) type C1 (20mm graded aggregate) masonry with solid block exc10cm in width and setting in CM 1:6 etc complete all as specified and directed.
Taking down cement plaster of any description incl raking out joints, hacking for key, scrubbing down with water, etc all as specified and as directed by Engineer-in-Charge.
M&L rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finishing the surface even and smooth without using extra cement, complete all as specificed and as per directed by Engineer-in-Charge.
M&L for rendering 5 mm thick in CM 1:3 finished even and smooth without using extra cement on ceiling including cement slurry 3 kg/sqm complete all as specificed and as per directed by Engineer-in-Charge.
M&L rendering 5mm thick in CM 1:4 with using water proofing compound over 10mm thick in CM 1:6 on external surfaces of block masontry even and smooth without using extra cement, complete all as specificed and as per directed by Engineer-in-Charge.
Supply only water proofing compound (Powder) conforming to IS-2645 1975.
M & L for painting with two coats of oil bound distemper over a coat of primer on newly plastered or untreated surfaces of walls including nesessary preparation of surfaces complete all as specificed and as per directed by Engineer-in-Charge.
M & L for painting with two coats of oil bound distemper over a coat of primer on newly plastered or untreated surfaces of ceiling including nesessary preparation of surfaces complete all as specificed and as per directed by Engineer-in-Charge.
M& L for one coat of wheather proof exterior acrylic emulsion paint with anti fungal property over a coat of primer on old painted wall surfaces etc complete all as specified and as directed by Engineer-in-Charge.(Make Apex Ultima)
M& L for two coat of wheather proof exterior acrylic emulsion paint with anti fungal property over a coat of primer on newly plastered wall surfaces including preperation of surfaces etc complete all as specified and as directed by Engineer-in-Charge.(Make Apex Ultima)
M&L for one coat of oil bound distemper over old painted wall surfaces complete all as specified and as directed by Engineer-in-charge.
M&L for two coat of oil bound distemper incl complete removal of existing treatment of old painted wall surfaces complete all as specified and as directed by Engineer-in-charge.
M&L for One coat of oil bound distemper as in ceilings/false ceiling over old painted ceiling surfaces complete all as specified and as directed.
Taking up or down, 15mm dia bore, GI tubing, medium grade, including removal from site, complete all as specified and as directed by Engineer-in-Charge.
Supply and laying 20mm external dia CPVC pipes SDR11 including Plain CPVC fittings SDR11 mean fittings which do not have any metal component and is jointed with CPVC solvent cement only (Elbow, Tee, Socket, Reducer, Bushing, Step over bends, End cap, End plugs, etc) & Special fittings include CPVC Brass fittings (Brass elbow, Brass Tee, Male threaded brass adaptor, Female threaded brass adaptor, etc), Unions, Ball valves, Flange and tank adaptor as on walls/ceiling/floors complete all as specified and as directed by Engineer-in-charge.
S & F in repairs rotational moulded polythelene water storage tanks ISI marked (cylindrical vertical with closed top) of 500 Ltrs capacity with tank cover (top), hoisted and fixed in position, including taking down existing with all connections complete all as specified and as directed by Engineer -in-Charge.
S & F in repairs rotational moulded polythelene water storage tanks ISI marked (cylindrical vertical with closed top) of 1000 Ltrs capacity with tank cover (top), hoisted and fixed in position, including taking down existing with all connections complete all as specified and as directed by Engineer -in-Charge.
S&F in repairs 20mm dia nipple of PTMT, suitable for HDPE water tank, min weight 45 gms, complete all as specified and as directed by Engineer-in-Charge.
S & F in repairs 20mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed, minimum weight 142 gms,complete all as specified and directed by Engineer-in-Charge
S&F in repairs gun metal globe or gate valve, 20mm dia, screwed down high pressure with iron wheel head, screwed both ends for iron pipes or for union complete all as specified and as directed by Engineer-in-Charge
S&F in repairs Brass Chromium plated tubular towel rail, 20mm dia, D type, 60cm long, between flanges including suitable bracket complete all as specified and as directed by Engineer-in-Charge.
S&F in repairs,10 litre capacity,low level PVC flushing cistern, syphonic action type white colour,with in let ball valve float and handle,PVC flush pipe,brackets etc complete all as specified and as directed by Engineer-in -charge
S&F in repair 32mm brass chromium plated bottle trap for wash basin with inlet and outlet screwed for pipe or connection including necessary packing union and cap complete all as specified and as directed by Engineer-in-Charge.
S&F in repairs stainless steel gratings 125mm dia, complete all as specified and as directed by Engineer-in-Charge
S&F in repairs vitreous China wash hand basin of size 550 x 400mm white flat back including chromium plated pillat tap, waste coupling, including brackets, PVC waste pipe, including cutting for and pinning in ends of brackets or errecting stand, complete all as specified and as directed by Engineer-in-Charge.
S&F in repair stop valve, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screw both ends for 15mm dia iron pipe or for union and fixed complete all as specified and as directed by Engineer -in-Charge.
S & F in repairs 15mm size PVC Connection with C P Brass Nuts of length 450mm, complete all as specified and as directed by Engineer-in-Charge.
S&F in repairs chromium plated, stainless steel towel rings,200mm dia complete all as specified and as directed by Engineer-in-Charge.
S & F in repairs chromium plated hand shower (health faucet) 1 meter, with PVC tube with wall hook , complete all as specified and as directed by Engineer-in-Charge.
S & F in repairs two way bib cock, brass CP mixture for mixing hot & cold water complete all as specified and directed.
S & F in repair PVC waste pipe, 32/40mm dia, for WHB, urinal & sink complete all as specified and as directed by Engineer-in-Charge.
S & F in repairs Bib tap, cast copper alloy chromium plated,15 mm dia with fancy type screwed down for iron pipes or brass ferule etc, complete all as specified and as directed by Engineer-in-Charge.
S&F in repair 15mm bore pillar tap, cast coppar alloy with capstan heads, chromium plated screwed down, high pressure, with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipes complete all as specified and as directed by Engr-in-Charge
S & F in repairs sink with drainage board, made up of stainless steel, 1mm thick for kitchen or laboratory with plug washers and waste fittings, including bedding in cement mortar 1:3 into dwarf wall or cantilever brackets and connecting union to pipe, over all size 915mm x 460mm, bowl size 410 x 330 x 160mm etc, complete all as specified and as directed by Engineer-in-Charge.
S&F in repairs stainless steel plate rack of size 610x760x250 mm with all fittings as per sample kept in GE Office and as perr direction of Engineer-in-Charge
S&F in repair viterous China squatting pan "Orissa Pattern" size 580x440mm white with integral foot rest, connection to trap and to flushing pipe, anti syphonge pipe etc, complete all as specified and as directed by Engr-in-Charge
S & F Aluminium anodised (minimum anodisation is 15 microns) Door / window / Ventilator/partition frames and shutters (02 Nos glazed & gauzed), side hung type, without sash bars, standard aluminium grills, necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, handles, locking arrangement etc,including taking down aluminium door/window/Ventilator/partition frames and shutters all as specified and as directed by Engineer-in-charge.(Aluminium section shall be of make Jindal/Hindalco/ Indalco). (Note:- Weight of various Aluminium sections shall only be considered for measurement for payment. However cost of rubber packing given in the item shall be deemed to be included in the rate quoted. Glass panels,prelaminated particle boards, aluminium wire cloth as applicable will be measured and paid separately as supplied only & Item Such as hinges shall be considered under supply and fix items).
Supply only 4mm thick sheet glass ordinary quality and glazing with rubber packing around the glass, in squares n. exc 0.5 Sqm in each pane complete all as specified and as directed by Engineer-in-charge.
Supply only 4 mm thick ACP board (Aluminium Composite Panel ) fixed to aluminium frames complete all as specified and as directed by Engineer -in-Charge.
S&F powder coated aluminium grill of design DG-104 pattern, fixed with U channel complete all as specified and as directed by Engineer-in-Charge
S&F in repairs cast copper alloy, chromium plated hot and cold 15mm dia wall mixer 3-in-1 system with provision for both hand shower and overhead shower complete with 115mm long bend pipe, connecting legs & wall flange complete all as specified and as directed by Engineer- in - charge. [excluding hand & overhead shower].
Taking down chowkats but with shutter (Without taking off shutters from the frame) n.exc1.5 Sqm complete all as specified and as directed by Engineer -in-Charge.
Taking down chowkats but with shutter (Without taking off shutters from the frame) above but are exc 1.5 Sqm but n.exc 4.00 Sqm complete all as specified and as directed by Engineer -in-Charge.
Taking down Shutters of any description n exc 1 sq. m each complete all as specified and as directed by engineer-in-charge
Taking down shutters but exc 1 sq. m and n exc 2 sq. m each complete all as specified and as directed by engineer-in-charge
Taking down shutters of any description n exc 1 Sqm each and refixing in same opening including taking down, easing and adjusting and also refixing builders hardware as required including renewal of unserviceable screws, etc. complete all as specified and as directed by Engineer-in-charge
Taking down shutters of any description exc 1 Sqm and n exc 2 sqm each and refixing in same opening including taking down, easing and adjusting and also refixing builders hardware as required including renewal of unserviceable screws, etc. complete all as specified and as directed by Engineer-in-charge
S & F second class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints.
S & F 35 mm thick second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a).all as directed by Engr-in-Charge. Note :- Glass/Wire mesh shall be measured and paid separately
S & F 30 mm thick second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a).all as directed by Engr-in-Charge. Note :- Glass/Wire mesh shall be measured and paid separately
S & F 35 mm thick second class hard wood, plain framed, panelled shutter (two panel) with lock rail with panels of 12mm thick timber flat on both sides ( feather edged). The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated all as specified and directed by Engr-in-charge
Taking down PVC door including frame above n.exc 1.5 Sqm complete all as specified and as directed by Engineer -in-Charge.
Taking down PVC door shutter exc 1 Sqm and n.exc 2 Sqm complete all as specified and as directed by Engineer -in-Charge.
S&F solid PVC Door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification & drawing in SSR complete all as specified and directed by Engineer -in-Charge.
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC `C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing in SSR complete all as specified and directed by Engineer -in-Charge.
S & F Aluminium anodised (minimum anodisation is 15 microns) Door / window / Ventilator/partition frames and shutters (02 Nos glazed & gauzed), side hung type, without sash bars, standard aluminium grills, necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, handles, locking arrangement etc,including taking down aluminium door/window/Ventilator/partition frames and shutters all as specified and as directed by Engineer-in-charge.(Aluminium section shall be of make Jindal/Hindalco/ Indalco). (Note:- Weight of various Aluminium sections shall only be considered for measurement for payment. However cost of rubber packing given in the item shall be deemed to be included in the rate quoted. Glass panels,prelaminated particle boards, aluminium wire cloth as applicable will be measured and paid separately as supplied only & Item Such as hinges shall be considered under supply and fix items).
Supply only 4mm thick figured glass ordinary quality and glazing with rubber packing around the glass, in squares n. exc 0.5 Sqm in each pane complete all as specified and as directed by Engineer-in-charge.
Supply only 12 mm thick Prelaminatd particle board, exterior grade, prelaminated exterior grade on both sides with decorative choice lamination and fixed to aluminium frames complete all as specified and as directed by Engineer -in-Charge.
S & F in repairs 12 mm thick Prelaminatd particle board, exterior grade, prelaminated exterior grade on both sides with decorative choice lamination and fixed to aluminium frames complete all as specified and as directed by Engineer -in-Charge.
Supply only aluminium alloy wire mesh 0.45mm nominal dia of wire and average width of apeture 1.4mm fixed with aluminium wire staples etc.complete all as specified and as directed by Engineer-in-charge.
Supply and fix in repairs to aluminium alloy wire mesh 0.45mm nominal dia of wire and average width of apeture 1.4mm fixed with aluminium wire staples etc.complete all as specified and as directed by Engineer-in-charge.
S & F in repairs 18/19mm thick prelaminated particle board, exterior grade, prelaminated on both sides with decorative choice lamination as in pelmet box complete all as specified and directed by Engineer-in-Charge.
S & F 18/19mm thick prelaminated particle board, exterior grade, prelaminated on both sides with decorative choice lamination as cupboard shutter complete all as specified and directed by Engineer-in-Charge.
S&F in repairs sheet glass ordinary quality and glazing with oil putty /wdn beads in square n.exc.0.50sqm in each pane 4 mm thick plain glass on new or old windows incl hacking out old complete all as specified and directed by Engineer-in-Charge.
S&F in repairs Figured glass, pin headed type ordinary quality and glazing with oil putty /wdn beads in square n.exc.0.50sqm in each pane 3 mm thick plain glass on new or old windows incl hacking out old complete all as specified and directed by Engineer-in-Charge.
S&F Butt hinges, 100mm length B-21 type extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed , complete all as specified and directed by Engineer-in-Charge.
S&F Butt hinges, 75mm length B-12 type extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed , complete all as specified and directed by Engineer-in-Charge.
S&F 300mm aluminium alloy, anodised, sliding door bolt with hasp & staple (Bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section of cast aluminium alloy complete all as specified and as directed by Engineer -in-Charge.
S&F 150mm long aluminium, anodised barrel tower bolt of extruded section, complete all as specified and as directed by Engineer -in-Charge.
All as per item above but 100mm long.
S&F 150mm size handle extruded aluminium alloy anodised, fabricated type, complete all as specified and as directed by Engineer -in-Charge.
All as per item above but 100mm long.
S&F as in repairs butt hinges, 100mm length B-21 type extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed , complete all as specified and directed by Engineer-in-Charge.
S&F as in repairs butt hinges, 75mm length B-12 type extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed , complete all as specified and directed by Engineer-in-Charge.
S&F as in repairs 300mm aluminium alloy, anodised, sliding door bolt with hasp & staple (Bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section of cast aluminium alloy complete all as specified and as directed by Engineer -in-Charge.
S&F as in repairs 150mm long aluminium, anodised barrel tower bolt of extruded section, complete all as specified and as directed by Engineer -in-Charge.
S&F as in repairs 100mm long aluminium, anodised barrel tower bolt of extruded section, complete all as specified and as directed by Engineer -in-Charge.
S&F as in repairs 150mm size handle extruded aluminium alloy anodised, fabricated type,complete all as specified and as directed by Engineer -in-Charge.
S&F as in repairs 100mm size handle extruded aluminium alloy anodised, fabricated type, complete all as specified and as directed by Engineer -in-Charge.
Supply & Fix in repairs 140mm long door stopper of aluminium alloy body and tounge, anodised with hard drawn steel spring fixed in floor complete all as specified and as directed by Engineer -in-Charge.
S&F in repairs brass chromium plated toilet paper holder recessed type, complete all as specified and as directed by Engineer-in-Charge.
S&F in repairs vitreous China urinal, bowl type complete including providing and fixing plugs, bedding urinal against wall in cement morter 1:2 securing urinal to plugs with and including 60mm long brass screws pointing around urinal back in cement etc, complete all as specified and as directed by Engineer-in-Charge.
S&F in repair vitreous china EWC white including flush pipe, seat cover etc, including connection to drain (or out going pipe) and to flushing pipe anti syphonage pipes etc complete all as specified and as directed by Engineer-in-Charge.
S&F in repairs plastic seat cover for EWC solid type closet set white colour complete all as specified and as directed by Engineer -in-Charge.
S&F in repair internal kit with syphone for PVC flushing cistern 10 liter capacity, complete all as specified and as directed by Engineer-in-Charge.
S&F in repairs cast iron, soil waste/vent pipes(sand case) in any legnth with or without ears, with cement joints, fixed to wall bore of pipes 75mm dia complete all as specified and as directed by Engr-in-Charge.
All as per item No. 48 above, but 100mm bore soil waste/vent pipe complete all as specified and as directed by Engr-in-Charge.
S&F in repairs CI bend 100mm dia with door acees branch piece, 100mm dia, double, (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches Tee Junction with oval access hooks, complete all as specified and as directed by Engr-in-Charge.
S&F in repairs CI bend 75mm dia with door acees branch piece, 100mm dia, double, (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches Tee Junction with oval access hooks, complete all as specified and as directed by Engr-in-Charge.
S&F in repair shower arm 15 mm size, 195 mm long with bend of 45 degree with flange of PTMT any colour ( Minimum weight 40 gms ) complete all as specified.
S&F in repairs Brass Chromium plated shower rose 125mm size, with swivel joint, fixing to steel pipe or union, complete all as specified and as directed by Engineer-in-Charge.
Disconnecting of existing tank of capacity 500 ltr and setting aside or lowering if required for repairs cleaning etc and refixing in position hoisting and connecting , complete all as specified and as directed by Engineer -in-Charge.
Disconnecting of existing tank of capacity 1000 ltr and setting aside or lowering if required for repairs cleaning etc and refixing in position hoisting and connecting , complete all as specified and as directed by Engineer -in-Charge.
Taking up or down, and refixing of 15 mm bore, GI tubing, medium grade,in new or old positions including cleaning for refixing complete all as specified and as directed by Engineer -in-Charge.
M&L for factrory made UPVC three track sliding window (white in colour), complete comprising UPVC multy chambered frame section of size 50mm x 43mm and UPVC shutter section of size 32mm x 54mm duly reinforced with 1.2mm GI section as required, window frame shall have provision for glass and specially designed UPVC track bottom and top of frame. All corners of frame and sash bar will be fusion welded, UPVC glazing bands, interlock, gasket and brush seal including builder's hardware such as touch lock and rollers including providing 4mm thick plain float glass & stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm. window shall be fixed to the wall with 100mm long 8mm dia fastners etc complete including taking down existing UPVC Windows all as specified and as directed by engineer- in- charge. Make:-Duroplast/Feniesta/window magic of make:Ramtec overseas Pvt Ltd.
M&L Cutting holes for inserting hold fasts in PCC block masonry built in cement mortar and making good disturbed portion in PCC 1:2:4 type B1, as required, depth of embedded portion exceeding half brick but not exceeding one brick walls complete all as specified and as directed by Engineer -in-Charge.
S & F mild steel articles such as hold fasts conforming to IS-2062 and grade E-165 (Fe-290), including riveting/or welding and fixing with screws, bolts, etc. complete all as specified and as directed by Engineer-in-charge.
M&L for preparation of new wooden surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M&L for one coat of synthetic enamel paint on old painted wood/wood based surfaces exceeding 10 cm width or girth including preparation of surfaces complete all as specified and directed by Engineer-in-Charge.
S&F in repair Aluminium (extruded section) Door closer hydraulically regulated, designation No 3 universal type, suitable for door shutters of 851 to 1000mm width and of weight between 61 to 80 kg and fixed
S&F in repairs decorative type curtain rod aluminium alloy incl anodised decorative brackets etc complete all as specified and as directed.
S&F powder coated aluminium grill of design DG-104 pattern, fixed with U channel complete all as specified and as directed by Engineer-in-Charge
S&F in repair snake guard 0.9/1.00m complete all as specified and as directed
S&F in repair Steel wall hanger with 6 nos of hooks complete all as specified and as directed
S&F in repair Soap Dish complete all as specifed and as directed by Engr-in-Charge
S&F in repair Corner Glass shelf 300mm complete all as specified ans as directed by Engr-in-Charge
M/s Harjas Construction & Waterproofing Co
M/s Ramesh Lal
Nirman Construction Company
P Babu
M/s Prem Enterprise
M/s Saina Enterprises
Bismi Builders & Enterprises
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .