Repair and Maintenance Work of Various Medical and Health Buildings including PHC, CHC and HWC centers in Various area in the DNH district of UT of DNH and DD.(2nd Call)

Amount

Civil work Providing material, Equipment and labour forExcavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 Meter lead.(C) Hard Murrum complete as directed by engineer-incharge.

Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on undecorated wall surface to give an even shade including throughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth.

Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) to give an required shape even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials. Etc. complete.

Applying priming coat over new steel and other metel surface after and including preparing the surface by thoroughly cleaning, oil,grease, dirt and other foreign matter and scoured with brushes fine steel wood, scrapers and sand paper with ready mixed priming paint brushing red lead.

Painting Two coats (excluding priming coat) on previously painted steel and other metal surface with enamel paint, brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter.

Painting Two coats (excluding priming coat) on previously painted wood and wood based surface with enamel paint, to give an even shade including cleaning the of all dirt, dust and other foreign matter.

Removing and scraping of old deteriorated plaster of any thickness from wall / R.C.C. member including stacking of serviceable material and disposal of unserviceable from site of work with all lead and lift.

Dismentling tiled of stone floors laid in mortar including stacking of serviceable materials and disposal of unserviceable materials with all lead and lift.

Demolition including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift. (i) R.C.C. work.

Demolition of Brick work and stone masonry including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift.(ii) In Cement Mortar.

Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand : 4graded stone aggregates 20 mm nominal size) and curing complete excluding cost of formwork in (A) Foundation and Plinth.

Brick work using common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:6 (1- Cement : 6 -fine sand)(B) Conventional

20mm thick sand faced cement plaster on walls upto height 10 metres above ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-cement : 3sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-sand) etc. complete.

Providing and laying Ceramic tiles 6mm. Thick in skirting risers of steps and dedo on 10mm. Thick cement plaster 1:3 (1-cement : 3-coarse sand) and jointed with white cement slurry.

Providing and laying Vitrified tiles 8 to 10 mrn thick, 24" x 24" in flooring treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3coarse sand ) finishing with -flush pointing in white cement.

Providing and laying Granite stone slab flooring over 20mm (average)base of cement mortar 1:6 (1-cement : 6 coarse sand) or L.M. 1:1.5(1- lime putty : 1.5 coarse sand) laid and jointed with gray cement slurry including rubbing and polishing complete. (A) Granite slab 18mm thick

Provoding and fixing flush door shutters, solid core construction with frame of first class hardwood with cross board and face veneer or plywood face panels, including Anodised alluminium butt hinges with necessary screws. (B) Nondecorative type and block board core anodised alluminium butt hinges in flush door shutters (2) 35 mm thick.

Steel work, welded in built up sections framed work including cutting, hoisting, fixing in position and applying a priming coat of read lead paint. (A)In beams and joists, channels angles Tees, flats, with connecting plates or angle cleats as in main and cross beams. Hip and jack rafters, purlins conneted to common rafters and the like.

Providing Corrugated G.I. sheet of Class-3 roofing fixed with galvanised iron J or L Hooks, Bolts and nuts 8 mm diameter with bitumen and G.I. limpet washer or G.I. limet washer filled with white lead complete excluding the cost of purlins, rafters and Truses (1) 0.80 mm thick sheet.

Providing and fixing M.S. grills of required pattern to wooden frames of windows etc. with M.S. flats at required spacings and frame alround, square or round bars with round headed bolts and nuts or by screws (A) Plain Grill.

Cleaning the existing surface, Providing & Laying water proofing treatment in Double Layer to terrace with APP ( Arctic Polypropylene Polymer) Modified Pre- Fabricated Five Layer Water Proofing Membrane, HYDROSTOP of TIKI DAN make, comprising of 1st Layer of 3 mm thick and minimum 3.5 kg/sq.mtr. weight membrane Hydrostop 3PY M, upper surface Finished in Minerals and Bottom Surface Finished in Plastic Polyethylene Film and having the reinforcement of Non-Woven Polyester Mat at Core, including a coat of Bitumen primer TIKI PRIMER-S for Bitumen Membrane Manufactured to IS:3384. Over the dried primer coat, Laying the APP membrane HYDROSTOP in DOUBLE LAYER using of 2nd Layer to the first, while maintaining the side overlap100 mm and End overlap 150 mm, Sealing all overlap etc. complete, including the treatment at all junctions and corners to accommodate stresses with 300mm wide strip of 3 MM HYDROSTOP 3PYP and treatment over the vertical plane up-to 200 mm height above the finished floor level with 3MM APP membrane 3PYM. The water proofing membrane terminated by tucking it into the groove made on vertical plane, the groove sealed with Cement-Sand Mortar, etc, all complete. The Joints of the top Layer of HYDROSTOP 3PY M Should be released with TIKI BOND.

Providing and fixing cast iron (Spun) Nahni trap of the following nominal diameter of self cleaning design with C.I. screaed down or hinged grating including cost of cutting and making good the walls and floor 100mm inlet and 50mm outlet. ( C ) 100mm. dia.

Providing and fixing wsh down water closet (European type, W.C. Pan) with integral P or S trap including jointing the trap with soil pipe in Cement Mortar 1:1 (1-Cement : 1-fine sand) (Seal and cover to be measured and paid for separately)(A) vitreous China Pattern :(i) in white colour

Providing and fixing 12.5 Litres low level flushing cistern with a pair of C.I. or Mild brackets complete with fittings such as lead valve less syphon 15mm nominal size brass ball valve with polythene float, C.P. brass handle unions and couplings for connections with inlet and overflow pipes, 40mm dia porcelain enamelled flush bend including cutting holes in walls and making good the same connecting the flush bend with cistern and closet (overflow pipe to be measured and paid for separately)(A) Vitreous China (i) in white colour.

Providing and fixing in position with clamps etc. 32mm nominal internal diameter galvanised steel tube flush pipe for high level flushing cistern including connecting the flush pipe with cistern and closet and making good the walls and floors.

Providing and fixing G.I. inlet connection for flush pipe with W.C. pan.

Providing and fixing washbasin with single hole for pillar tap with C.I. or M.Sbrackets painted white including sutting holes and making good the same but excluding fittings.(A) Vitreous China:(ii) Flat Back washbasin 550 mm x v 400mm size. (i) In white colour.

Providing and fixing C.P. brass waste for washbasin or sink. (A) 32mm dia.

Providing and fixing M.I. fisher union for washbasin or sink.(A) 32mm dia.

Providing and fixing 100mm sand cast iron grating for gully, floor or Nahni trap.

Providing and fixing screw down bib taps of following size.(B) Brass chromium plated screws down Bib Tap. (i) 15mm dia.

Providing and fixing pillar tap, capstan head, screw down high pressure with screws, shanks and back nuts. (i) 15mm dia.

Providing and fixing brass screw down stop tap.(A) 15mm dia.

Providing and fixing Rubber plug for sink or washbasin.

Providing and fixing chromium plated bottle trap with necessary couplings of approved quality for washbasin.

Providing and fixing ball cock of approved quality as directed.(A) Copper Metal (i) 25mm dia.

Providing, laying and jointing in true line and level 15mm dia. U.P.V.C. pipe (SCH-40) for cold water including fittings make PRINCE / SUPREME / ASTRAL / FINOLEX or equivalent as approved by Engineer in charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concelled as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials.

Providing, laying and jointing in true line and level 25mm dia. U.P.V.C. pipe (SCH-40) for cold water including fittings make PRINCE / SUPREME / ASTRAL / FINOLEX or equivalent as approved by Engineer in charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concelled as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials.

Providing, laying and jointing in true line and level 40mm dia. U.P.V.C. pipe (SCH-40) for cold water including fittings make PRINCE / SUPREME / ASTRAL / FINOLEX or equivalent as approved by Engineer in charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concelled as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials.

Providing and fixing PVC SWR pipes IS 13592 for Drain. 75mm dia.

Providing and fixing PVC SWR pipes IS 13592 for Drain. 110mm dia.

Constructing brick masonry chamber for underground C.I. Inspection chamber and bends with briocks having croshing strength not less than 35Kg. Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x 610mm internal dimensions total weight of cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1cement :2- coarse sand :4-graded stone aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm thick with cement mortar 1:3 finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete.(i) Inside dimensions 455mmx 610mm and 450mm deep for single pipe line.

Providing and fixing chromium plated brass half trun flush cock of approved quality including fixing in pipe line etc. complete.(i) 20mm dia.

Providing and fixing 100mm size P or S trap for water closet squatting pan including jointing the trap with the pan and soil pipe in cement Mortar 1:1 (1Cement : 1-Fine sand)(A) Vitreous China.

Providing & fixing Health Fauset Heavy duty with hook with fitting complete as directed by EIC/Architect.

Providing Ridges or Hips 600 mm overall in plain G.I. sheet class -3 fixed with G.I.J. or L hooks and nuts 8mm dia G.I. limpet and bitumen washer complete (1) 0.80 mm thick sheet

Providing and fixing 150 mm wide 450mm over all semicircular plain G.I. sheet class-3 gutter with iron brackets 40mm x 3mm size bolts, nuts, washers etc. including making necessary connection with rain water pipes. (i) 0.80 mm thick sheet.

Providing and fixing eco-friendly light weight calcium silicate false ceiling tiles having Tegular edge & 15 mm Thick Densified edges on the Tile Periphery for Extra Strength The Light weight calcium silicate ceiling tiles shall have , light reflection 85% non-combustible as per B.S. 476 part IV, 100% humidity resistance and also having thermal conductivity0.043° w/m KC.for the best thermal Insulation . The Light weight calcium Silicate tile shall be of approved texture Fine fissured/ Spintone/Cosmos having NRC value of 0.5 & Globe having NRC value of 0.75 NRC or equivalent of size 595 X 595 mm to be laid on true horizontal level suspended inter locking metal grid of hot dipped galvanized steel sections (galvanizing @120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and size of 24X38mm made from 0.30 mm thick (minimum) sheet, 1200mm centre to centre, and cross ‘T’ of size 24X28mm made out of 0.33mm (Minimum) sheet spaced 1200mm along spaced between main ‘T’ at 600mm centre to centre to form agrid of 1200X600mm and secondary cross ’T’ of length 600mm and size 24x28mm made of 0.30 mm thick (Minimum) sheet to be interlocked at middle of the 1200X600mm panel to form grid of size 600X600mm resting on periphery walls/partitions on a perimeter wall angle pre-coated steel of size (24X24X3000mm made of 0.40mm thick (minimum) sheet with the help of rawl plugs at 450mm centre to centre with 25mm long dry wall screws @ 230mm interval and laying 15mm thick Densified edges light weight calcium silicate ceiling tiles of approved texture (Fine Fissured/Cosmos/Spintone) in the grid including, cutting /making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required, Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size 25X35X1.6mm fixed to ceiling with 12.5mm dia and 50mm long dash fasteners, 4mm G.I. adjustable rods with galvanized steel level clips of size 85X30X0.8mm, spaced at 1200mm centre to centre long main ‘T’ bottom exposed with 24mm of all T-sections shall be pre-painted with polyester baked paint, for all heights, as per specifications, drawings and as directed by engineer-in-charge.Note:- Only calcium silicate false ceiling area will be measured from wall to wall. No deduction shall be made for exposed frames/opening (cut outs) having area less than 0.30 sqm. The calcium silicate ceiling tiles shall have NRC. Value of 0.50 (Minimum) for Fine fissured/Spintone/Cosmos and 0.75 NRC for Globe, light reflection 85% non-combustible as per B.S. 476 part IV, 100% humidity resistance and also having thermal conductivity. 0.043° w/m KC.for the best thermal Insulation

Providing sock pit of 5.00 Cu.M. Volume including excavating and filling brickbats with dry masonry work at top for 45cm. height including covering the top with stone including providing vatas in C.M. 1:3 with finishing curing etc. complete as directed.

Electrical Works Point wiring for Light / Bell with 2-1.5 sq.mm & earthwire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires, in following type of pipe to be erected concealed in/ on surface on wall/ceiling complete with 6A Modular type switch / bell push & accessories and earth continuity of following type, erected on PVC / Metallic box, single mounting base frame covered with textured/metallic front plate modules erected on / in wall / ceiling as per pipe erected, with necessary Lamp holder/ceiling rose / H.D.Connector as directed.with medium class Rigid PVC pipe and accessories. Cat III. Make of switch and board: Havells/Great white/MK/L&T (As directed by Engineer in charge).

Providing following type of Modular Type Accessories mounted with PVC / metallic/Wooden box, single mounting base frame covered with textured / metallic/white front plate , modules erected with necessary connections as per site situation directed by Engineer In charge. 16/20/25 Amp. Modular Starter for Motor / A.C. Unit Complete

Providing & erecting Switch board for Computer or electric apparatus consisting of following items in single board erected on PVC / Metal/Wooden board concealed/open with 3 mm thick PC (Polycarbonate) / Acrylic sheet erected as directed 1 no. 6A/16A universal plug-switch combined. 3 nos. 6A Switch 3 nos. 6A 5 pin Plug For Tissino Type Accessories

Providing and erecting Approved make Ceiling fan with double ball bearing ISI mark with condenser A.C. 23OV.50 c/s.1200 mm. sweep complete, canopy and 30cms dwon rod erected on existing hook or clamp with 24/0.2, 3 core flexible wire with earthing. Make: ANCHOR/BAJAJ/USHA/ORIENT/CROMPTON [As directed by Engineer in charge]

Providing following type of Modular Type Accessories mounted with pvc / metallic box, single mounting base frame covered with textured / metallic front plate , modules erected with necessary connection.Electronic hum Free four or more steps EME Fan regulator.Cat III.Make:- Same as Fan Used. (As directed by Engineer in charge).

Supplying & erecting approved make low noise decorative exhaust fan having size 200mm with 1350 RPM with square frame ABS body with inbuilt lowers & square frame.Make: ANCHOR/BAJAJ/USHA/ORIENT/CROMPTON/Havells.(As directed by Engineer in charge)

Supplying & erecting Electronic Type Cordless Call Bell erected on PVC/Metal board having portable bell push working on D.C. & bell on 230V A.C. supply with cells / battery.(As directed by Engineer in charge)

Supplying & erecting XLPE(IS:7098)(I)-88 ISI unarmoured copper cable 1.1 KV grade to be erected as directed of following size.4 core 16 Sq. mm,Make:-Polycab/RR Kabel/Finolex/Havell’s (As directed by Engineer in charge).

Supplying & erecting XLPE(IS:7098)(I)-88 ISI unarmoured copper cable 1.1 KV grade to be erected as directed of following size.4 core 4 Sq. mm,Make:-Polycab/RR Kabel/Finolex/Havell’s (As directed by Engineer in charge).

Miniature circuit breaker single pole 6A to 32A suitable to operate on 240 V A.C. system and having breaking capacity 10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI Mark.Cat III. Make:Legrand/Havells/anchor/L&T. (As directed by Engineer in charge).

Providing & erecting 240 V MCB double pole switch for motor & inductive load (C Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing box having 40 Amp capacity CAT III. Make:Legrand/Havells/anchor/L&T.

Approved make ELCBs / RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and Short Circuit withstand capacity of 6 KA and suitable for operation on 3 phase and neutral 415V. having characteristic of quick action & tripping with all advance feature & do not incorporate any electronic component for 63 Amps. FP rating erected as directed.Make:Legrand/Havells/anchor. (As directed by Engineer in charge).

Providing and erecting four pole MCB isolator A.C. 22 duty confirms to IS 13947-3 in existing box having 100 Amp capacity.Cat III. Make:Legrand/Havells/anchor (As directed by Engineer in charge)

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used) suitable for single phase incoming and horizontal single phase outgoing sheet steel double door (IP-43) 8 Way ( The DBs should be used of same company of MCB to be used) ( As directed by Engineer in charge)

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used) suitable for three phase incoming and single phase horizontal type outgoing Per phase isolation type (PPI) sheet steel double door (IP-43) 12 way (The DBs should be used of same company of MCB to be used) ( As directed by Engineer in charge)

Supplying and erecting horizontal / vertical mounting type storage water heater with copper container housed in M.S./S.S. body insulated with glass wool / puff complete with heating elements,adjustable thermostats 300C to 850C, indicating lamp, safety valve, fusible plug, etc.complete erected with coach bolts, nuts. washers & cementation 10 Ltr. with 3 KW. heating element Cat-III

Repairing of existing indoor LED light fixture(tube light/panel light/spot light/strip light/decorative wall lights etc as per sample )by suitable driver 2 kv according to LED PCB as per requirement of following rating wattage capacity. 8-15 watt capacity

Repairing of existing indoor LED light fixture(tube light/panel light/spot light/strip light/decorative wall lights etc as per sample )by suitable driver 2 kv according to LED PCB as per requirement of following rating wattage capacity. 16-24 watt capacity

Repairing of existing indoor LED light fixture(tube light/panel light/spot light/strip light/decorative wall lights etc as per sample )by suitable driver 2 kv according to LED PCB as per requirement of following rating wattage capacity. 25-36 watt capacity

Repairing of existing indoor LED light fixture(tube light/panel light/spot light/strip light/decorative wall lights etc as per sample )by suitable driver 2 kv according to LED PCB as per requirement of following rating wattage capacity. 38-50 watt capacity

Repairing of existing indoor LED light fixture(flood light/street light/bollard lights/decorative wall lights/landscape light etc as per sample )by suitable driver 4 kv,IP65 according to LED PCB as per requirement of following rating wattage capacity. 90-100 watt capacity

Rewinding of Any fan by using supper enamelled copper wire and over hauling and putting in working order with original speed with guarantee for one year including credit of D.M. retained by Agency.

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size (C) with oval conduit /PVC casing capping double lock type 2 wire 4 sq. mm

Providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi stranded, annealed copper conductor with heat resistant PVC insulated conforms to IS 694, IEC - 227 erected in existing pipe of following size (Specifically for control panel, relays, power switchgears, motor starters & control wiring) with required size of copper lugs, nuts and bolts if required. 2.5 Sqmm wire. Make RR Kabel, Polycab.

Providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi stranded, annealed copper conductor with heat resistant PVC insulated conforms to IS 694, IEC - 227 erected in existing pipe of following size (Specifically for control panel, relays, power switchgears, motor starters & control wiring) with required size of copper lugs, nuts and bolts if required. 1.5 Sqmm wire. Make RR Kabel, Polycab.

Providing and erecting busbar chamber confirming to IS-375 fabricated from 16 G.M.S. sheet, dust & vermin proof having hinged door with rubber gasket and necessary busbar supports with COPPER busbar having current density not more than 1.6 Amp. / sq.mm (Rated current / cross section area) duly wrapped with colour insulation tape for phase sequence, three phase & neutral each suitable for following current capacity with necessary painting mounted on wall or pedestal frame of required size with necessary connections. Suitable for 63/100 Amp. capacity

Providing following type of Modular Type Accessories mounted with PVC / metallic/Wooden box, single mounting base frame covered with textured / metallic/white front plate , modules erected with necessary connections as per site situation directed by Engineer In charge. One No. SP 6 Amp.

Providing following type of Modular Type Accessories mounted with PVC / metallic/Wooden box, single mounting base frame covered with textured / metallic/white front plate , modules erected with necessary connections as per site situation directed by Engineer In charge. One No 5 pin plug

Providing following type of Modular Type Accessories mounted with PVC / metallic/Wooden box, single mounting base frame covered with textured / metallic/white front plate , modules erected with necessary connections as per site situation directed by Engineer In charge.16 Amp. SP one way switch

Providing following type of Modular Type Accessories mounted with PVC / metallic/Wooden box, single mounting base frame covered with textured / metallic/white front plate , modules erected with necessary connections as per site situation directed by Engineer In charge. 6/16Amp. Universal socket

Providing and erecting ISI marked PVC insulated PVC Sheathed Flat flexible Submersible copper cable approved make of following Size. 3 Core x 1.5 Sq. mm.

Providing and erecting ISI marked PVC insulated PVC Sheathed Flat flexible Submersible copper cable approved make of following Size. 3 Core x 2.5 Sq. mm.

Supplying & erecting UPVC Mini trunking (PVC Casing-n-Capping) having double-locking arrangement with grooves, trunking of size not below 12.5 mm in height as per IS with accessories of PVC/Resin polypropylene not below 1.8 mm thick duly sealed in joint & erected on wall / ceiling of 25 mm size .

Providing and erecting ISI mark Medium class RIGID PVC PIPES of 25 mm size complete to be erected on/in wall or ceiling erected with necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps with following dia of pipes, in approved manner as directed.

Providing & erecting PVC Corrugated Flexible Conduit with required nos. of coupling, PVC bushes, Check-nuts etc. complete of 25mm sizes.

Supplying electrical insulation L.T. Tape role with ISI marked having nominal width 1.8 cms nominal length 9.0 mtr nominal thickness 0.125 mm and having self adhesive PVC

Providing & erecting open well type horizontal mono block pump set with stainless steel body having following specification 1 H.P. single phase open well motor pump set suitable for 185 LPM discharge @ 25 mtr. head, suitable for 32 mm dia. Delivery pipe with control panel.

Supplying of single phase submersible pump set suitable for 100 mm size or more dia bore well having motor capacity and discharge as under with necessary panel box Motor rating 2 HP (17 stage) pump having capacity of 106 LPM at 40 mtr head suitable for 32 mm dia. delivery pipe

Supplying of submersible pump set suitable for bore of 100 mm. dia. or more having three phase motor capacity not more than 5 H.P. with following capacity . (25 stage) 120 to 125 LPM discharge at 155 to 120 mtrs. head respectively suitable for 50 mm dia. delivery pipe

Supplying & erecting Direct - On - Line Starter with 18 A. rating contactor and with 3.5 Amp. 18A range directly operated in totally insulated elegant enclosure for single phase operation up to 3 HP as per IS 13947 complete erected on P.W. Block with necessary connection.

Supplying & erecting Direct-on-line, Starter with 15A.rating contractor and with 4-14A. range, directly operated thermal overload relay in sheet steel enclosure for 3phase 415V.50 c/s. A.C. motor up to 7.5 H.P.complete erected on P.W. Block with necessary connection.

Opening the submersible pump set for fault finding , carry out required repairs refitting the same with necessary oiling, greasing & overhauling & making pump set in good working condition. Rewinding of submersible motor by using approved make PVC insulated copper winding Cores of suitable size complete with connection. Capacity Suitable for pump of upto 5 HP size. Dismantled Materials to be retained by agency.

Supplying & erecting earth pit of minimum bore dia.150mm size approved make Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of corrosion free hot dipped G.I.Pipes having Outer pipe dia of 50mm having 80-200 Micron galvanising, Inner pipe dia of 25 mm having 200-250 Micron galvanising, connection terminal dia of 12mm with constant ohmic value surrounded by highly conductive compound with high charge dissipation suitable for following type of applications with chamber and heavy duty cover.(approved make OEM has to submit test certificate) & having back filling compound of (B) Inner chemical (CCM Compound)- Resistivity:- 0.2 / meter testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar content:- <2%(C) Back fill Compound :- Earthing compound should be capable to retain moisture for long time Necessary test report must be submitted. (a) For Electrical Installation up to 440V in normal soil Length of pipe - 1 Mtr Back filling compound - 1 Nos Bag of 15 Kg.

Providing and erecting required size HOT deep Galvanised iron strip for earthing of H.T. , OCB/ ACB/ Transformer LT panel board, Motors etc. using proper clamp.

providing and erecting Approved make Three Phase & Neutral LT Heavy Duty Switch Disconnector Fuse Unit Cubical type for panel mounting complete with operating mechanism suitable to operate on 415V A.C. , 23A duty With HRC fuses of suitable load confirming to IS. 13947 (Part I & III). of following capacities. 100Amp/125 Amp

Providing & erecting Switch board for Computer or electric apparatus consisting of following modular type accessories mounted with PVC / Metallic concealed/open box with single mounting base frame covered with textured/metallic /white front plate,modules erected with necessary connections as directed 1 no. 6A/16A universal plug-switch combined. 3 nos. 6A Switch 3 nos. 6A 5 pin Plug For Modular Type Accessories Cat. III

Painting of street light pole with bracket complete with two coats of Aluminium paint for following size of pole. up to 10 to 13 mtr

Providing and erecting Approved make Ceiling fan with double ball bearing ISI mark with condenser A.C. 23OV.50 c/s.1200 mm. sweep complete, canopy erected on existing hook or clamp with earthing. [Make shall be approved by Engineer in charge]

Providing and erecting Approved make ELCBs / RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA and suitable for operation on single phase 240 V,50Hz. having characteristic of quick action & tripping with all advance feature & do not incorporate any electronic component. for following Max. rating erected as directed 40Amps. DP

Providing and erecting Approved make ELCBs / RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA and suitable for operation on 3 phase and neutral 415V,50Hz. having characteristic of quick action & tripping with all advance feature & do not incorporate any electronic component for following Max. rating erected as directed. 40Amps. FP Make: Legrand/Havells/Anchor/L&T. ( AS directed by Engineer in charge)

Providing and erecting Approved make Three Phase & Neutral LT Heavy Duty Switch Disconnector Fuse Unit Cubical type for panel mounting complete with operating mechanism suitable to operate on 415V A.C. , 23A duty With HRC fuses of suitable load confirming to IS. 13947 (Part I & III). of 63 Amp capacities.

Providing and erecting Approved make Three Phase & Neutral LT Heavy Duty Switch Disconnector Fuse Unit Cubical type for panel mounting complete with operating mechanism suitable to operate on 415V A.C. , 23A duty With HRC fuses of suitable load confirming to IS. 13947 (Part I & III). of 100/125 Amp capacities.

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables 3 1/2 core 25 Sq. mm ( 16 Sq. mm 1/2 core)

Supplying and erecting approved make online Un-interruptible Power Supply system comprising flat cum-boost charger, static Inverter & sealed maintenance free SMF batteries. The charger having operating capacity for input 160-270V AC & inverter having output 230V,50 Hz Ac with 0.8 load power factor with battery, over/under voltage output with over load & short circuit protection equipment. The system housed in CRC sheet duly powder coated paint with following power backup.with MS painted batteries stand, 10% Overload capacity for momentary load. 1 KVA with 1Hr Backup

Supplying and erecting approved make online Un-interruptible Power Supply system comprising flat cum-boost charger, static Inverter & sealed maintenance free SMF batteries. The charger having operating capacity for input 160-270V AC & inverter having output 230V,50 Hz Ac with 0.8 load power factor with battery, over/under voltage output with over load & short circuit protection equipment. The system housed in CRC sheet duly powder coated paint with following power backup.with MS painted batteries stand, 10% Overload capacity for momentary load. 2 KVA with 1Hr Backup

Supplying and erecting approved make online Un-interruptible Power Supply system comprising flat cum-boost charger, static Inverter & sealed maintenance free SMF batteries. The charger having operating capacity for input 160-270V AC & inverter having output 230V,50 Hz Ac with 0.8 load power factor with battery, over/under voltage output with over load & short circuit protection equipment. The system housed in CRC sheet duly powder coated paint with following power backup.with MS painted batteries stand, 10% Overload capacity for momentary load. 5 KVA with 1Hr Backup

Servicing of 5KVA Single phase Un-interruptible Power Supply 230V AC

Servicing of 30KVA Three Phase Un-interruptible Power Supply

Replacing unserviceable running capacitor of 36 MFD to 50 MFD + 2 to 4 MFD Upto 2.5 H.P. compressor motor for Air .Conditioner machine upto 2 Ton..

Replacing condenser for ceiling fan/ Exhaust Fan / Pedestal Fan / Table Fan / Cabin Fan {Credit of D.M. retained by Agency.}

Servicing of 125KVA DG Set Lub Oil 20Ltr Pak Oil Filter 1 Set Diesel Filter Inset Diesel Filter Element Coolant 1 Ltr Air Filter

Servicing of 200KVA DG Set Lub Oil 20Ltr Pak Oil Filter 1 Set Diesel Filter Inset Diesel Filter Element Coolant 1 Ltr Air Filter

Providing and erecting Air Cooled Condenser unit having face area of 0.235 Sq.Mtr. made out of 27 / 30 gauge copper tube and cover with Aluminium fins of12-13FPI . For Split AC Machine for 1.0 TR A.C. Machine with 3/4 Row deep Coil

Providing and erecting Air Cooled Condenser unit having face area of 0.235 Sq.Mtr. made out of 27 / 30 gauge copper tube and cover with Aluminium fins of12-13FPI . For Split AC Machine For 1.5 TR A.C. Machine with 3/4 Row Deep coil

Providing and erecting Air Cooled Condenser unit having face area of 0.235 Sq.Mtr. made out of 27 / 30 gauge copper tube and cover with Aluminium fins of12-13FPI . For Split AC Machine For 2.0 TR A.C. Machine with 3/4 Row Deep coil

Providing and erecting Air Cooled Condenser unit having face area of 0.235 Sq.Mtr. made out of 27 / 30 gauge copper tube and cover with Aluminium fins of12-13FPI . For Split AC Machine Replacing wheel blower suitable for Split type A.C. machine.

Providing, and erecting evaporator coil having suitable external surface area made out of copper tube with 0. 15 mm. thick Aluminium fins of 12-13FPI. For Split AC Machine for 1.0 TR A.C. Machine with 3/4 Row deep Coil

Providing, and erecting evaporator coil having suitable external surface area made out of copper tube with 0. 15 mm. thick Aluminium fins of 12-13FPI. For Split AC Machine for 1.5 TR A.C. Machine with 3/4 Row deep Coil

Providing, and erecting evaporator coil having suitable external surface area made out of copper tube with 0. 15 mm. thick Aluminium fins of 12-13FPI. For Split AC Machine for 2.0 TR A.C. Machine with 3/4 Row deep Coil

Overhauling and servicing the Split type A.C.MACHINES by Chemical cleaning of the condenser, cooling coil etc. by veniclean/Eq. material, water & cleaning all necessary parts and putting the machine in working order.

Flushing the line, leak testing, leak stopping, vacuuming, dehydrating and charging the gas in the refrigeration system for A.C. machine up to 2 TR

Repairing of PCB of remote control of split ac machine

Replacement of defective remote control panel assembly unit of Split air conditioner.

Providing ROW water booster pump for 10 Ltr.R.O. system

Providing Membranes for 10 Ltr. R.O. System

Providing & Erecting New Spun Filter and other Filter Set With Bowl.

Repairing and servicing labour charges for 10 Ltr. R.O. System

Providing ROW water booster pump for 25 Ltr.R.O. system

Providing Membranes for 25 Ltr. R.O. System

Providing & Erecting New Spun Filter and other Filter Set With Bowl.

Repairing and servicing labour charges for 25 Ltr. R.O. System

Providing ROW water booster pump for 50 Ltr.R.O. system

Providing Membranes for 50 Ltr. R.O. System

Providing & Erecting New Spun Filter and other Filter Set With Bowl.

Repairing and servicing labour charges for 50 Ltr. R.O. System

Replacing old and unserviceable fan motor by new 1/10 to 1/12 H.P., 1250 RPM fan motor for water cooler.

Replacing unserviceable thermostat switch by Danfoss or approved make thermostat having range 1 c to 22 C for water switch for water cooler.

Replacing unserviceable 25 to 36 MFD running capacitor for 1.5H.P. compressor motor of water cooler.

Supplying and erecting approved make Reciprocating compressor suitable for operation on 220 / 230 V 50 c/s. A.C. supply for One Ton capacity window/ Split type Air conditioner or water coolers of 150 Litre capacity

Suppling and Installing of 415V 325 Amp LT MCX 41 Contactor

Ekta Construction