8874 SPECIAL REPAIRS TO TRADESMAN SHOP BLDG No. NP-100 AND SPL REPAIRS TO BLDG No. NP-78 AT MHCTC AND PROVN OF COVERING STAGE, INSTALLATION OF STAGE LIGHTS AT GAZEBO IN NADFM / RTC UNDER AGE BR I SOUTH PUNE

Amount

Demolition of cement concrete in any position on roof slab and paving not exc 15cm thick (below or above roof slab) un-reinforced complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and as directed.

M&L coloured Vitrified Ceramic tiles of size 600x600x8-10mm thick (square/ rectangular) polished in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match (light colour) laid over and including 20 mm thick screed bed in CM (1:6) complete all as specified and directed.

M&L for glazed coloured digital printed ceramic tiles of size 300mmx450mmx7mm thick in vertical surfaceses etc set qnd jointed in neat cement slurry and pointed in coloured cement to match with colour tiles including 10mm thick backing coat in CM (1:4) and filleting at top etc complete all as specified and as directed.

M&L for Non skid coloured ceramic tiles 7 to 8 mm thick 600 x 600mm size of approved colour, set, jointed in cement slurry and pointed in white or coloured cement to match the shade of tiles laid over & including 20 mm thick screed bed in CM 1:6 etc complete as in flooring all as specified and directed.

M&L for 16 to 18 mm Granite (of any type) work (table rnbbed and polished) in steps, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite as counters of any radius complete all as specified and as directed.

Rounding to edges of stone slab one edge, such as in steps, cooking platform and other similar situations complete all as specified and as directed.

S & F Machine cut cuddappa stone slab 20 to 25 mm thick for making cooking platform etc complete all as specified and as directed.

M&L for dubbing out average 15mm thick on irregular face of walling in CM 1 :6 complete all as specified and as directed.

M&L for ready mix rendering 15mm thick cement plaster on block/concrete surfaces in CM (1:6) using sagol finish complete all as specified and as directed.

M&L for 1 mm thick wall care putty including preparation of surface complete all as specified and as directed.

M&L for preparation of wall surfaces and applying two coats of oil bound distemper over a coat of alkali resistance primer incl preparation of surface complete all as specified and as directed.

M&L for Two coat of cement based paint over a coat of cement based primer including preparation of surfaces complete all as specified and as directed.

M&L for Gypsum ceiling board for ceiling prepainted, perforated finish, 595 x595 x 9 to 9.5mm thick in size, of approved brand/make, laid over and including grid work of size 600 x 600mm, made out of 0.5mm thick G.I. tee 32 x 24 mm for main, 25x24mm for cross tee and 20 x 20mm angle fixed on wall, powder coated finish on exposed faces of tee and angle. hung from ceiling using 2 mm thick G.I. Suspension wires spaced at 1200 mm on main runners including making niches for fans/light at as specified and directed.

Taking down chowkats or frames wooden/steel with shutters (w/o taking off guard bar from frames) n.exc 1.5 Sqm each complete all as specified and as directed.

S&F aluminium powder coated three track sliding window with two or more shutters with & including 4 mm thick tinted glass, one shutter of stainless steel mosquito proofing wire cloth of 0.36mm nominal dia & 1.18 mm width of aparture with good quality bearing, handle, lock etc using PVC beading etc using following sections of 'Jindal Aluminum Ltd ' or equivalent in Ajit India Pvt Ltd or Crystal Bombay, as approved. fixing to stone masonary walls with & including Ist class teak wood plugs of size 20mmX20mm at an interval of 0.5m alround the track including drilling holes. (a) Frame bottom 20620 (b) Frame top & side 20681 (c) Shutters top & bottom 20844 (d) Shutter inter lock 20724 (e) Handle (Side ) for 20606 shutters

M & L for 75 mm thick PCC (1:3:6) type C-2(40 mm graded stone aggregate) as in plinth protection with saucer drain etc complete all as specified and as directed.

S&F MS framed work such as grills ornamental designe type with ends of bars shouldered or riveted, or forged into spikes, framed guard bars or similar work using steel section conforming to Fe-410-0 or Fe-310-0 complete all as specified and as directed.

S&F 15 mm bore GI pipe of medium grade laid in floors or fixed in walls including taking down pipe complete all as specified and as directed.

M&L for PVC (SWR) pipes single socketed in any length 110 mm dia complete all as specified and as directed.

M&L for PVC (SWR) pipes single socketed in any length 75mm dia complete all as specified and as directed.

M&L for PVC (SWR) bend/L bow 110 mm dia complete all as specified and as directed.

M&L for PVC (SWR) bend/L bow 75mm dia complete all as specified and as directed.

M&L for PVC(SWR) branch piece double equal or unequal complete all as specified and as directed.

M&L for PVC (SWR) vent cowl 75 mm dia complete all as specified and as directed.

M&L for PVC (SWR) reducers 110 x75mm mm dia complete all as specified and as directed.

M&L for PVC (SWR) 'S' trap 110mm complete all as specified and as directed

M&L for PVC (SWR) gully trap 110mm/125mm with grating complete all as specified and as directed.

M&L for providing and fixing CP toilet fitting in repairs as specified and as directed by the Engr -in-Charge for the following:-.

Bib Cock CAT No. CHR-3037 with wall flange

Soap dish CAT No. CHR-7733

Single Towel rail 600mm long CAT No. ACN 1111 NM

Angular stop cock conforming to CAT No.CHR 5059 of "Jaquar" or of equivalent make specified here-in-after.

S & F in repairs, Two way bib cock brass CP toilet fittings complete all as specified & directed. Make: Jaquar CAT No 35041 or equivalent model in Marc/ ESS-ESS as approved by GE.

M&L for gun metal globe valve with iron wheel fixed for 20mm bore pipe complete all as specified and as directed.

M&L for ball valve brass with polythelene float and fly nut fixed complete for 20 mm bore of pipe complete all as specified and as directed.

M&L for health faucet with connection flexible pipe complete all as specified and as directed.

S&F oval shaped coloured vitreous china WHB of overall 600mm size including 32mm CP waste coupling, PVC waste pipe etc complete including Pillar cock long neck with aerator CAT No CON -021KN (Make - Jquar) directed by Engr-in-Charge.

M&L for PVC connection 15 mm size with PTMT nuts of length 450mm complete all as specified and as directed.

S & F in repairs, vitreous china wash down water closet pan (pedestal pattern), white, 'P' or 'S' type, inc. 10 litres, PVC flushing cistern, L L, white, with inlet,ball valve, float & brackets, inc. flush pipe, PVC tube 32mm dia. & inc. plastic water closet seat, black, closed pattern with flat bottem, & cover & M S CP or aluminium hinging device, complete.

M&L for PVC floor trap 100mm including jointing with CM (1:4), 75mm dia complete all as specified and as directed.

M&L for Grating doom 100mm dia PTMT complete all as specified and as directed.

S&F PVC door frame of size 50x47mm made out of 5mm thick prelaminated PVC sheet reinforced with mild steel sqare tube complete all as specified and as directed.

S & F factory solid PVC door shutter, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick Moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face supplying & fixing in frame at site as per specification & drawing complete given on Sl Page No. 161 of SSR Part-II 2010 as specified and directed by Engr-in-Charge.

S & F pressed steel frames for doors with one or more rebates incl necessary hold fasts, hinges, lock strike plate etc complete as specified size of frame 125 x 60mm filled with PCC 1:3:6 type C-0 complete all as specified and as directed.

S&F 35mm thick flush shutter, solid core construction with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

M&L for mild steel electroplated butt hinges 100mm medium weight complete all as specified and as directed.

M&L for mild steel electroplated sliding bolt 300 long fixed with bolts & nuts complete all as specified and as directed.

M&L for mild steel tower bolts 150mm long complete all as specified and as directed.

M&L for mild steel powder coated handles 150mm complete all as specified and as directed.

M&L for preparation of wood surfaces and applying 2 coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L for rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position with all fittings and fixture all as specified in SSR Part 1 capacity 1000 litres incl PTMT float valve with PVC ball 20mm bore of pipe complete all as specified and as directed.

S&F 25mm dia aluminium powder coated fancy type curtain rod complete all as specified and as directed.

S & F curtain rod bracket brass powder coated with goldern matt finished decorative type suitable for 25mm bore pipe all as specified & directed by Engr-in-Charge.

Dismantling of single layer Mangalore pattern tiles or similar tiles in roofing etc complete all as specified

M&L for roof tiles Mangalore pattern inter locking at side joints laid dry etc complete all as specified. [Make : Charminer/Prajapat/Raja/Recho]

M & L for Water proofing treatment to RCC roof slab, walls, chhajjas etc, shall be carried out as specified below and as directed by Engineer-in-Charge. (a) M&L for 10mm thick plaster screed bed layer in CM 1:3 on concrete surfaces. (b) Preparing plastered surfaces of roof slab, walls, chhajjas etc, by brooming with broom sweeping free from dirt dust etc & evenly applying a coat of approved bituminous primer @ 0.20 Kg/sqm of area complete all as specified. (c) Laying APP polymer modified approved membrane, 3 mm thick non woven, polyester, weighing not less than 3.5 Kg/sqm with laps & overlaps as specified & joints sealed and applied complete by torch application method all as specified & directed by Engr-in-Charge. Carrying out test by flooding water for 24 hrs for leakage & seepages and rectifying the same to the entire satisfaction of GE. (d) Finally applying a coat of solar reflective bituminous aluminium paint @ 0.15 ltr/sqm on the top of membrane surfaces complete all as specified & as directed by Engr in Charge.

Preparation of new or old wooden surfaces exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Surface excavation not exc. 30cm deep and averging 15 cm deep and getting Hard/sense soil complete all as specified and as directed.

Dismantling battens for tiles, shingles etc of any size including tilting fillets spaced exc. 15 cm complete all as specified and as directed.

Dismantling timber scantling, unframed in post, rafters, purlines etc under 40 sqcm in section where necessary complete all as specified and as directed.

S & F roof sheeting prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified incl dismantling of old sheet complete all as specified and as directed.

S & F roof sheeting prepainted galvalume aluminium zinc coating GI based plain sheet to match the ridges 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified incl dismantling of old sheet complete all as specified and as directed.

M&L for MS structural steel work, framed as in trusses, purlins, rafter, post etc. conforming to grade E-250 (Fe-410W, quality A) including shaped washers including necessary cutting required length, notching drilling, riveting and or welding or connecting with nut bolts with angle cleats, fish plat, gusset plate and also erecting in true position complete all as specified and as directed.

M&L for PCC 1:2:4 type B1 using 20mm graded stone agg as in roof kerbs or mud stops, rounded or chamfered on edges incl necessary form work required complete all as specified

Dismantling ceiling/boarding of any description, fixed in any position like partition etc with nails including frame work of timber complete all as specified and as directed.

Preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed.

S & F ventilators/louvers using 4mm thick x 10cm wide froasted glass strips and following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make and rubber beading etc all as directed :- (a) SP 20048 (b) Glazing clips 19352

Taking down and Refixing shutter in same opening of any discription exc 1 sqm n exc 2 sqm complete all as specified and directed.

Taking down /cutting steel windows shutter by means of gas cutter w/o disturbing of sofit /jambs/cills etc of any description n exc 1.5 sqm (without taking off guard bars) complete all as specified and directed.

Taking down cement plaster from walls, ceiling including racking out joints, hacking for keys, scrubbing down with water etc complete all as specified.

M&L for Ready mix rendering 15mm thick in CM (1:4) on brick / concrete surfaces using water proofing compound as per manufacturers instruction finished with sponge finish. (NOTE : WPC shall be measured and paid seperately)

Supply only integral water proofing compound complete all as specified and as directed.

M&L for ready mix rendering 15mm thick cement plaster on block/concrete surfaces in CM (1:6) on irregular faces of walls using sagol finish complete all as specified and as directed

M&L for preparation of new surfaces and providing two coats of weather proof exterior emulsion paint on walls complete all as specified and directed. (Make : Asian paint / Nerolac / Berger)

M&L for two coats of OBD on walls over a coat alkaliresistance primer including preparation of new plaster surfaces with 1 mm thick wall care putty/wall putty surfacese complete all as specified and as directed.

M&L for preparation of new steel surfaces of any description, over 10cm width or girth and applying two coats of aluminium pait over a coat of red oxide zinc chrome primer complete all as specified and as directed.

M&L for two coats of OBD on walls over a coat alkaliresistance primer including preparation of old plaster surfaces of wall surfacese with 1 mm thick wall care putty complete all as specified and as directed.

Demolition of brick work or stone/boulders masonry built in Cement Mortar complete all as specified and as directed.

M & L for brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified & directed by Engr-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises as directed.

M&L coloured Vitrified Ceramic tiles of size 600x600x8-10mm thick (square/ rectangular) polished in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match (light colour) laid over and including 20 mm thick screed bed in CM (1:6) complete all as specified and directed.

M&L for Granite slab, 18 to 20 mm thick of approved colour, laying in design pattern using approved colour granite slab strips all as directed by Engr-in-Charge, laid bedded & jointed in neat cement slurry and pointed in white/coloured cement to match the shade of slab, laid over and including 20 mm thick, screed bed in CM 1:6 including rubbing and polishing complete as in floors complete all as specified and as directed.

S&F steel work in tubular trusses incl speacial shaped washer etc. Complete using ERW or induction butt welded tubes conforming to IS 1161-1998 Grade St 240 complete all as specified and as directed.

S&F framed brackets of angle or tees with web and flanges cut to shape, as necessary gusset plates etc. not exc. 10kg each conforming to Fe-290, Gde E-165 complete all as specified and as directed.

M&L for small whole bomboos ( not less than 50mm mean girth) closely laid to touch adjacent bamboos on both sides including tying securely with munj string for wall and ceiling fixing with wire complete all as specified and as directed.

M&L for preparation of newly untreated wooden surfaces and applying two coats of varnishing of any description over 10 cm in width or girth complete all as specified and as directed.

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, (fittings such as switches, ceiling roses, pendants, regulators sockets etc. to be measured separately), removing materials for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and as directed

Taking down carefully submain wiring any type and any size complete all as specified and as directed.

M&L for Point wiring using approved colour coding as per IS, with stranded copper conductor 1.5 Sq. mm (nominal area), single core, PVC insulated and unsheathed stranded FRLS cable 1100 volts grade ISI-694 marked make Havells / Polycab / Finolex including heavy duty, in and PVC casing capping including all accessories after cutting chases in wall/ceiling etc, heavy duty ISI marked, with modular sunken boxes with earth dolly duly , covered with modular plate suitable for modular accessories switches/sockets etc, including PVC insulated stranded copper conductor 1.5 Sqmm (nominal area) single core cable as earth continuity conductor to common earth and connecting to earth dolly for One light / fan point controlled by one switch & regulator complete all as specified and as directed. [Note:-Chase cutting and pointing shall be measered and paid separtly under relevent item.]

All as per item No. 87.00 above but for 3 pin 5 amps socket outlet point on the independent board complete all as specified and as directed.

All as per item No. 87.00 above but for 3 pin 5 Amps socket outlet point on same board complete all as specified and as directed.

All as per item No. 87.00 above but for Bell / Buzzer points controlled by one bell push complete all as specified and as directed.

M&L for point wiring with 2.5 sqmm PVC insulated (red for phase and black for neutral) unsheathed, multi stranded copper conductor 1100 volt grade FRLS cable in and incl not less than 2mm thick in and PVC casing capping with all accessories and 2.5 sqmm green in colour PVC seathed solid copper conductor cable for earth continuity connected to common earth dolly incl pressed steel terminal box/ PVC box surface/ flush type with 3 mm thick pre laminated hylem/PVC sheet for mounting fittings such as switches, sockets, fan regulators etc complete all as specified and directed for one 15 amp socket controlled by one switch in and incl PVC casing caping complete all as spd and directed.

S&F piano type switch 5 / 6 amps single pole, flush type complete all as specified and as directed.

S&F switch socket outlet combination multipurpose 2 in 1, 5/15 amps, 230 volts flush type complete all as specified and as directed.

S&F switch socket combined outlet 5 amps 5 pin 230 volts flush type complete all as specified and as directed.

S&F socket outlet 5 amps 5 pin 230 volts flush type complete all as specified and as directed.

S&F in replacement of ceiling fan regulator, 450 W, electronic step type, delux, suitable for fan 48"/56" sweep complete all as directed

S&F ceiling rose surface type 65x50mm three terminals complete all as specified and as directed.

S&F lamp holder (Angle/bracket) insulated body with back plate for batten fittings complete all as specified and as directed.

Supplying and fixing LED light fitting,1X18 Watt Baton Integrated LED Channel dimmable LED with white acrylic cover comprises of thermally conductive material pre-wired with high efficiency electronic driver, high translucent frosted diffuser gets glare free, smooth light distribution conforming to CAT part No.BN150W LED13S-6500 PSE OD GR of Philips or of equivalent make in WIPRO / Havells complete all as specified and as directed.

M &L for Sub main wiring complete with two single core 6sqmm,1100volts grade,ISI PVC insulated, stranded copper conductor cable with continuous copper earth conductor of 2.5 sqmm in and including PVC casing caping complete all as specified and as directed. (Make :- Polycab / Havells / Finolex) [Note : 2 runs of 6 sqmm cable and 1 run of 4 sqmm earth wire and 1 run of PVC casing caping shall be measured as one length.]

Taking down Main switch / DBs of any make and type including teakwood board etc complete and making good the disturbed surfaces including colour wash.

S&F MCB DB 8 way double door with 200 amps rated busbar 415 V, SPN recess mounted/wall mounted all as directed and specified by Engineer in charge.

S&F MCB DB 4 way double door with 200 amps rated busbar 415 V, SPN recess mounted/wall mounted all as directed and specified by Engineer in charge.

S&F MCB DB 4 way double door with 200 amps rated busbar 415 V, TPN recess mounted/wall mounted all as directed and specified by Engineer in charge.

Supply and fix in repair MCB SP 6-32A, 10 kA, C series, Amps 230 Volts complete all as specified and as directed. (Make: Legrand / Hegger / L&T)

Supply and fix in repair MCB SPN 10-32A, 10 kA, C series, Amps 230 Volts complete all as specified and as directed. (Make: Legrand / Hagger / C&S)

Supply and laying XLPE insulated heavy duty electric cables with aluminuim conductor, 1100 volts grades, cross sectional area 16 qmm 4 core complete all as specified and as directed.

Excavation in trenches n.exc 1.5 mtr wide and not exc. 1.5m in depth for foundation / for taking out pipe / laying cables and getting out in Soft /Loose Soil complete all as specified and as directed.

Excavation in trenches n.exc 1.5 mtr wide and not exc. 1.5m in depth for foundation / for taking out pipe / laying cables and getting out in Hard/Dense soil complete all as specified and as directed.

Returning filling in incluiding spreading levelling watering and well ramming in layers n.exc 25 cm complete all as specified and as directed.

Removing excavated material not exceeding 50 mtr and depositing where directed at a level n.exc 1.5 mtr above the starting point complete all as specified and as directed.

M&L for Reinforced concrete pipes,class NP2 with one collar per lengh of pipe of dia 155 mm ,half round (02 Nos for top & bottom) complete all as specified and as directed.

Supply and fixing Integral LED Street Light Luminaire of 24 W comprising of epoxy powder coated housing, enclosed with glass cover in frame suitable for 40/50 mm GI Pipe complete with accessories complete conforming to Cat Part No : BRPO22 LED 20 CW MR SI PSU GR of Philips or of equivalent in WiproHavells as specified here-in-after.

M&L for Earthing complete with galvanised steel earth plate electrode 60 cm x60 cm x 6 mm thick buried directly in ground ,(Earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level ,connected to and including galvanised iron earth wire 4 mm dia by means of nut, bolts, check nuts and washers of galvanised iron or steel complete all as specified and directed including testing on completion including the material and labour of the following : - (a) Excavation and earth work for drilling hole for electrode in any type of Soil. (b) PCC pit in cement concrete 1:2:4 type B-1, Pre cast RCC cover with suitable handle 40 mm thick in PCC 1:2:4 type B-1, reinforced with welded steel wire fabric weighing not less than1.87 Kg/ Sq meter. (c) Funnel with watering pipe of GI 20 mm nominal bore light grade and lugs etc complete all as specified and directed (d) 15 mm nominal bore medium grade GI protection pipe 5 meter long for protection of earthing lead complete all as specified and directed. (e) Requisite quantity of common salt and charcoal. (f) Testing of earthing.

S&F Switch piano; flush type, single pole, one way, and 15 Amp, 230 volt complete all as specified and as directed.

S&F Bell push 6 amp 230 volt 50 HZ AC supply complete all as specified and as directed.

S&F Socket outlet multipurpose having provision for 3 pin, 6 Amp and 2 pin, 6 Amp, piano flush type complete all as specified and as directed.

S&F Socket outlet multipurpose having provision for 3 pin, 15 Amp and 3 pin, 5 Amp, piano flush type complete all as specified and as directed,

Taking down ceiling fan of any size/sweep after disconnecting the wire from existing ceiling rose and refixing the same after cleaning dust, oiling greasing etc including providing flexible three core from ceiling rose to connector of fan complete all as specified and as directed.

Supply and fix step fan regulator 120 watt 2 module suitable for 230 volt 50 Hz AC supply complete all as specified and as directed.

M&L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated cable with stranded copper conductor of size 04 Sq. mm nominal area and drawing , in PVC conduit including PVC insulated 1.5 Sqmm (nominal area) stranded copper conductor earth wire complete all as specified and as directed. [NOTE: - Two runs of 4 sqmm cable,one run of 1.5 sqmm cable and one run of PVC conduit will be measured as one unit]

Supply and fix bell electric Ding dong suitable for 230 volt 50 Hz AC supply complete all as specified and as directed.

M&L for taking down existing FTL rod 36/40 watt and supply and fix surface wall mounted LED batten, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver for LED tube complete with retrofit LED energy saving recess/surface mounted luminaries, high efficiency diffuser for soft glare free light of capacity 20 Watt suitable for operation on 230 volt 50 Hz AC supply complete all as specified and as directed by Engineer-in-charge. [Make :- Cat Part No ENDURALINEARNEO BS20WLED 865SPCWH of Havells or equivalent model in Wipro / HPL / Philips as approved by GE]

S & F Sheet metal, 20 amp Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 amps,10 KA breaking capacity, 'C' series, 240 V complete all as specified and as directed.

S&F vertical 4 way TPN double door,recess mounted / wall mounted, MCCBs as incomer is 3 pole V-Tec of 100A rating & 16KA breaking capacity,MCCB is pre-fitted at factory & including price of MCCB, complete all as directed and specified by Engineer in charge.

Supply and fixing DB 12 way SPN with 200 amps rated bus bar, double door complete all as specified and as directed.

Supply and fixing of MCB Single pole and neutral rated capacity 32 A, 240 V breaking capacity 9KA, 'C' series complete all as specified and as directed.

Supply and spreading clean dry stone crush sand for cushioning to UG cable including spreading, levelling and hand punning etc complete all as specified and directed. (Note : The punned thickness shall only be measured for payment.)

Supply & laying un reinforced precast concrete cable cover class LV type I flat size 250 mm X 150 mmX 40mm complete all as specified and as directed.

M&L for sub main wiring complete with two single core 4 sqmm 1100 volt grade PVC insulated, unsheathed multistranded copper conductor (FRLS) cable in existing conduit, including continuous PVC insulated copper earth conductor 2.5 sqmm complete all as specified and as directed. (Note : 2 runs of 4 sqmm cable and 1 run of 2.5 sqmm earth wire and 1 run of PVC conduit shall be measured as one length.)

M&L for Point wiring using approved colour coding as per IS, with stranded copper conductor 1.5 Sq. mm (nominal area), single core, PVC insulated and unsheathed stranded FRLS cable 1100 volts grade ISI-694 marked including heavy duty, in and PVC concealed conduit including all accessories after cutting chases in wall/ceiling etc, heavy duty ISI marked, with modular sunken boxes with earth dolly duly, covered with modular plate suitable for modular accessories switches/sockets etc, including PVC insulated stranded copper conductor 1.5 Sqmm (nominal area) single core cable as earth continuity conductor to common earth and connecting to earth dolly for the following :- [Note :- Chase cutting and pointing shall be measered and paid separtly under relevent item.]

One light/fan point controlled by one switch.

One Socket outlet point, 5 Amp,on independent board.

M&L for Point wiring using approved colour coding as per IS, with stranded copper conductor 2.5 Sq. mm (nominal area), single core, PVC insulated and unsheathed stranded FRLS cable 1100 volts grade, ISI-694 marked for 3 pin,15 amp socket outlet, independent PVC casing caping with pressed steel sunken boxes not less than 60 mm deep with earth dolly duly painted with two coats of black bituminus paint over a coat of red oxide primer , covered with plastic laminated bakelite sheet cover 3 mm thick for mounting accessories (switches/sockets etc) including PVC insulated stranded copper conductor 1.5 Sqmm (nominal area) single core cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and as directed. [NOTE :- Cost of concealed of terminal boxesis inclusive with point wiring rates.]

S&F LED flood ligh fitting suitable for 40 Watt LED energy saving environment friendly long life, exclusive innovative die-cast aluminium flood light with high power LED as light source suitable for highlighting atchitectural feature or area lighting, also suitable to rough service / installation suitable for operation on 230 Volt 50 Hz AC supply including all standard fittings and fixture conforming to Havells CAT Part No. JETIRISFLS140WLED730SYMLTG or of equivalent in Wipro / Phillips complete all as specified and as directed.

S&F LED flood ligh fitting suitable for 40 Watt LED energy saving environment friendly long life, exclusive innovative die-cast aluminium flood light with colour changing with dimmer (22 x 21 x 13.5)high power LED as light source suitable for highlighting atchitectural feature or area lighting, also suitable to rough service / installation suitable for operation on 230 Volt 50 Hz AC supply including all standard fittings and fixture conforming to Forture Art CAT Part No. FCQ4030 (RGB) or of equivalent in Wipro / Phillips complete all as specified and as directed.

S&F decorative box type fittigns with colour end caps and prewired for LED tube complete with retrofit LED type energy saving recess / surface mounted luminaries, high efficiency PMMA diffuser for soft glare free light of capacity 20 watt suitable for operation on 230 Volt 50 Hz AC supply complete all as specified and as directed by Engr-in-Charge. [Make :- Crompton Cat part No. IGP132LT8-16 and LED LTT8-20 or of equivalent make in Wipro / Phillips]

M/s.BAJRANG CONSTRUCTION