PROVN OF UTENSIL CLEANING POINT NEAR ORS COOK HOUSE AT MIL STN KALKA UNDER GE (I) JUTOGH

Excavation in post holes n.exc. 0.5cum and getting out in Soft/ loose soil, complete all as specified and directed.

Excavation in trenches not exc. 1.50m wide and not exc. 1.50m depth for foundation, etc or for manholes/ sewage lines etc, n.exc 10 sqm on plan and getting out in hard/ dense soil, complete all as specified and directed.

M&L for PCC 1:4:8, type D-2, using 40mm graded crushed stone aggregate as in foundations, filling and mass-concrete, complete all as specified and directed.

M&L for brick work with sub class 'B' bricks, straight or curved on plan exc. 6 m mean radius, built in CM (1:6), complete all as specified and directed.

M/L for rendering 15mm thick in cement mortar 1:4 on concrete surfaces finished even and fair without using extra cement complete all as specified and directed.

M&L for use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exc 200m thick (Horizontal or sloping), complete all as specified and directed.

M&L for 10mm dia & over TMT bars cut to length bent to shape required, including cranking, bending spirally or hooking for columns and binding with M.S wire annealed not less than 0.9 mm dia or securing with clips quality confirmining, complete all as specified and directed.

M&L for RCC 1:2:4 ,Type B-1, Nominal Mix, using 20mm graded crushed stone aggregate as in slab supported on walls, Beams & columns in floors, roofs, landings, balconies, canopies, deck slab and in shelves and the like, complete all as specified and directed.

M&L for glazed ceramic tiles in vertical surface 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and incl provn of 10 mm thick backing coat in CM 1:4, complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in hard/ dense soil, complete all as specified and directed.

Removing excavated material n exc.50m and deposited where directed at a level n exc 1.5 m above the starting point in soils, complete all as specified and directed.

M&L for rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters, post and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe-410 (Gde-E-250), quality - B,complete all as specified and directed.

S&F for plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe-290, Gde E-165, complete all as specified and directed.

S&F for mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, but exc 10 cm and not exc 15 cm long with Dia of neck 11-15 mm, complete all as specified and directed.

S&F pre-painted galvaLume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws, complete all as specified and directed.

M&L for preparation of new steel surface of any description exc. 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer, complete all as specified and directed.

Surface excavation n.exc (n. exc) 30 cm deep and averaging 15cm deep and getting out in soft and loose soil, complete all as specified and directed.

M&L for broken stone or boulders as hardcore of guage exe 63mm but n exc 100 mm, deposited, spread and levelled in layers n exc. 15 cm thik, watered and rolled/ rammed to a true surface, complete all as specified and directed.

M&L for 75mm thick, PCC 1:4:8, Type D-2, using 40mm graded crushed aggregate as in sub base of floor, complete all as specified and directed.

M&L for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified and directed.

M&L for continuous brick edging with width equal to the depth of the brick, laid dry, on edge with Burn and clay Brick of sub class B old size, complete all as specified and directed.

S&F for triple layer white colour 1000 Ltrs rotational moulded polyethylene (PVC) water storage tanks cylindrical vertical with closed top including nipple nuts and washers for fixing inlet, outlet/washout pipes and air vent pipes, complete all as specified and directed.

S&F 20mm dia tubes medium grade, galvanized, with all fittings such as sockets, bends, elbows, tees etc, concealed/ surface fixed to walls and ceiling or laid in floors, complete all as specified and directed.

S&F 15mm dia tubes medium grade, galvanized, with all fittings such as sockets, bends, elbows, tees etc, concealed/surface fixed to walls and ceiling or laid in floors, complete all as specified and directed.

S&F Ball valve of brass, 20mm bore, high pressure with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified and directed.

S&F CI Gate valve, 20mm bore, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or union, complete all as specified and directed.

S&F in repair 15 mm fancy type chromium plated fancy type bib tap brass long body with flange screwed down high pressure CP cast copper alloy with crutch or butterfly handles scrwed down suitable for 15mm bore pipe or union, complete all as specified and directed.

S&F for stainless steel grating openable 100mm sqmm size with/ without hole including fixing with white cement, complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including taking down, complete all as specified and directed.

S&F for PVC (SWR) floor trap, 75mm bore, plain with grating including jointing with solvent cement, complete all as specified and directed.

S&F for CP brass soap dish, complete all as specified and directed.

M&L for point wiring with 1.5 Sqmm (nominal area), PVC insulated, FRLS multistranded, single core unsheathed, copper conductor cables drawn through and including PVC conduit with all accessories concealled in wall/ fixed to columns and fixed to ceiling etc. with and including 1.5 Sqmm (nominal area) PVC insulated, unsheathed,multi stranded, single core, copper cable green in colour as earth continuity wire connecting to common earth dolly including sunken boxes of suitable size with 3 mm thick hylam sheet top cover fixed with suitable size of brass screws for mounting switches, sockets, regulators etc complete for one light/ fan/ bell point controlled by one, one way switch all as specified and directed.

S&F switch piano flush type 6 amps, single pole one way, white in colour, complete all as specified and directed.

S&F ceiling rose surface type, 240 volts, 50 Hz, 6A, Pilot 3 plate, white in colour, bakelite 65x50mm, 3 terminals, complete all as specified and directed.

S&F LED light fitting 1x20 Watt, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and directed.

S&F factory made sheet metal enclosures double door type made out of CRCA 1.2 mm thick M.S sheet,powder coated, SPN DB with 200 Amps rated bus bar, 4 way, IP-42 protection surface mounting, 240 volts, dust and vermin proof, suitable for incorporation of MCBs duly cocealled in wall/fixed to columns, factory made, including making good distrubbed surfaces with matching colour, complete all as specified and directed.

S&F MCB SPN, 32 Amps, 240 volts, "B" series, 10KA, complete all as specified and directed.

S&F MCB SP, 6A-32 Amps, 240 volts, "B" series, 10KA, complete all as specified and directed.

S&F in repair 1100 volts grade heavy duty 6 Sq mm two core cable PVC insulated aluminium Solid conductor, served with inner shething of PVC sheathed in service conections suspended by insulating hangers and procelean beat not more than I metre apart including 4Sqmm suspension wire, one twin core cable flat or circular, service wire to be fixed in conduit pipe of proper size on the wall and roof.