8769REPAIR TO ROOF FLOORING CEILING SANITARY FITTINGS PERIODICAL SERVICES AND OTHER MISC WORKS FOR PERMENT BUILDING AT CTI ECHS OTM ACCN TEMP BUILDINGS AND OTHER AREAS UNDER AGE B R WEST OF GE M AF STATION JALAHALLI BANGALORE

Amount

Taking down cement plaster including raking out joints hacking for key, scrubbing down with water etc and including removal of debris to out side of MD land.

Demolition of brick work built in cement mortar or cement lime mortar and archor pillars etc but excluding ashlar facings dressed stone work and pre cast concrete articles and including removal of debris to out side of MD land.

Material and labour for PCC block masonry with solid blocks 1:3:6 type C1 using 20mm graded stone aggregate exc 10 cm in width and setting in mortar 1:6 complete.

Material and labour for PCC solid building blocks 10 cm thick PCC 1:3:6 ,Type C1 using 20 mm graded aggregate and setting in mortar 1:4

Material and labour for 15mm thick rendering in CM (1:4) on brick or concrete rete wall surface finished even & fair without using extra cement as in Wall with water proofing compound (Water proofing compound measured and paid separately).

Supply only for water proofing compound

Material and labour for 10mm thick rendering in CM (1:6) on brick or concrete wall surface finished even & fair without using extra cement as in Wall.

Material and labour 5mm thick rendering in CM (1:3) on brick or concrete surface on ceiling , finished even & fair without using extra cement.

Material and labour three coats of white washing on walls including preparation of new plastered surface.

Material and labour three coats of white washing on ceiling including preparation of new plastered surface.

Material and labour two coats of distempering on new plastered surface over a coat of primer including preparation of new surface.

Material and labour two coats of cement based paint on new plastered surface over a coat of primer including preparation of new surface.

Demolition of Cement concrete (unreinforced) in ground floor and paving's not exc. 15 cm thickness (below or above GL) and including removal of debris to out side of MD land..

Material and labour for 75 mm thick PCC 1:3:6 type C-2(using 40 mm graded mechanically crushed stone aggregate )as in sub base , paving and plinth protection finished even and smooth without using extra cement.

Material and labour for 40 mm thick PCC 1:2:4 type B-1(using 20 mm graded mechanically crushed stone aggregate )as in flooring finished even and smooth using extra cement.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided and including removal of debris to out side of MD land.

Material and labour for Reinforced cement concrete (nominal mix) in Type B1 1:2:4 (20 mm graded aggregate) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like incl form work.

Material and labour for Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

Material and labour for Mild steel TMT bars 6 to 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

Taking down wooden Shutters of any description n exc 1 sqm each and refixing same opening.

Taking down wooden shutters of any description exc. 1 Sqm and n. exc 2 sqm and refixing same opening.

Taking down wooden Shutters of any description n exc 1 sqm each

Taking down wooden shutters of any description exc. 1 Sqm and n. exc 2 sqm

Taking down wooden chowkhats or frames with shutters area exc. 1.5 Sqm and n.exc 4 sqm each and removing from the site

Taking down wooden chowkhats or frames with shutters area n exc. 1.5 Sqm each and removing from the site

Taking down wooden chowkhats or frames area n exc. 1.5 Sqm each and removing from the site

Taking down wooden chowkhats or frames area exc. 1.5 Sqm and n.exc 4 sqm each and removing from the site

Material and labour for 2nd class HW Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed

Supply and fixing 35 mm thick 2nd class HW factory made panelled shutters with panel of 12 mm thick reneered commercial plywood kiln seasoned chemically treated with 15 x 6 mm teak wood edging all around the panels.

Supply and fixing Glazed and skeleton shutters of 2nd class hard wood 30 mm thick shutters, open rebated and prepared (receive glass, gauze etc (without sash bars) edges of framing plane, chamfered or rounded, fitted with cut and mitered beds for securing glass etc, size of members of shutters as specified in SSR Part I Section 8 Clause 8.20 (a) supplied and fitted to chowkhats.

Ditto all as per item No 30 above but divided into squares and rebated sash bars any numbers.

Material and labour preparing surfaces of wood and wood based materials, steel and iron work, new or old of any description and girth not otherwise described and treated with tar or coal tar black paint.

Supply and fixing mild steel hold fasts conforming to Fe 290 grade -E--165.

Supply and fixing Factory made PVC choawkats or frames of size 50x 47mm with wall thickness made out of extruded 5 mm rigid PVC foam sheet mitered at corner and jointed with 2 Nos of 150mm long brackets of 15mm x MS square tube the vertical door prattles to be reinforced with 19 x 19 mm MS square tube of 19 gauge EPDM rubber gasket door frame to be fixed to wall using MS screws of 65/100mm size complete as per manufacture’s specification

Supply and fixing Factory mode 30 mm thick PVC paneled door shutter,,made from MS tube of 19 gauge x 19 mm x 19mm for styles and 15mm x for top & bottom rails, covered with heat molded PVC channel of 5mm thick sheet and 30x 50mm wide to from styles and 5mm thick x 75 mm wide PVC sheet for top rail and lock rail on either side and 5mm thick x200mm wide crass PVC sheet as gap insert for top rail and bottom rail paneling of 5mm thick PVC sheet fitted with MS frames welded/sealed to styles and rails with PVC sheet beading either side jointed together

Supply and fixing MS butt hinges medium weight cold rolled 100 mm size

Supply and fixing 75mm long butt hinge.

Supply and fixing aluminum anoldised handle 150 mm long.

Supply and fixing aluminum anoldised handle 125 mm long.

Supply and fixing aluminum anoldised barrel tower bolt 200 mm long.

Supply and fixing aluminum anoldised barrel tower bolt 125 mm long.

Supply and fixing 300 mm (length of bolt) aluminum sliding door bolt (bolt type) above enameled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate.

Supply and fixing Galvanised MS wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tack or galvanized wire staple and including fixing with beads supplied with joinery when fixed in repair incl MS Flat 15 x 3 mm thick with hole to receive wire mesh incl nut bolt

Material and labour two coats of synthetic enamel paint over a priming coat of pink primer incl preparation untreated surfaces of wood or wood based material exc 10 cm width or girth

Shutters of any description n exc 1 sqm each Resecuring or easing & adjusting, without taking down

All as per item No 45 above but exc 1 sqm and n exc 2 sqm each

Supply and fixing in repair 150 mm size aluminum helical door spring including roller and roller plate fixed to wooden/steel choukhat or frame with screw/welding complete fixed in repairs.

Supply and fixing in repair 125 mm long aluminum tower blots, stove enameled black, with bright bolt and fixed

Supply and fixing in repair 150 mmlong aluminum barrel tower blots, stove enameled black, with bright bolt and fixed

Supply and fixing in repair 300 mm long aluminum sliding door bolts, plate type, stove enameled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed

Supply and fixing in repairs galavanised MS wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm in repairs.

Hacking out old broken glass pane any thickness any size from wooden/steel window frames

Supply and fixing sheet glass 3 mm thick ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane

Material and labour preparing surfaces of wood and wood based materials, new or old of any description and girth not otherwise described and treated with creosote oil .

Supply and fixing in repairs plastic water closet seat cover, black/white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device.

Supply and fixing in repairs Aluminium (extruded section ) body Door closer hydraulically regulated, designation No. 3,universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed

Supply and fix in repairs for floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor 150 mm size of cover plate.

Demolition and bracking up drain pipes 100 mm dia (salt glazed ware, AC or PVC, reinforced concrete rete) set in cement mortar incl bend and dimension piece etc. Complete.

Ditto but 75 mmdia of pipes.

Supply and fixing 110mm bore PVC pipe (SWR) single socketed in any length with rubber ring joints fixed to wall complete all as specified.

Supply and fixing 75mm bore PVC pipe (SWR) single socketed in any length with rubber ring joints fixed to wall complete all as specified.

Supply and fixing in repairs for PVC (SWR) bend 110 mm dia

Supply and fixing in repairs for PVC (SWR) bend 75 mm dia

Dismantling floor hearth or wall tiling including cement mortar bedding but incl screed bed and plaster.

Material and labour for non skid tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding .11 sqm but not exc. 0.18 sqm in floor etc. set and jointed in neat cement sullery out pointed in white cement to Match incl screed or bedding layer of mortar 15 mm thick in cm 1:4 for laying floor finishes

All as per item No 65 but vertical surfaces incl 10 mm thick cement plaster in cm 1:4

Material and labour for non skid tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.06 sqm but not exc. 0.11 sqm in floor etc. set and jointed in neat cement sullery out pointed in white cement to Match incl screed or bedding layer of mortar 15 mm thick in cm 1:4 for laying floor finishes

Material and labour for glazed ceramic designer coloured tiles of size 300 X 200 X 7 mm thick as in vertical surface such as skirting / dado, set, jointed in neat cement slurry and pointed in white cement using pigment to match color of tiles incl 10 mm thick plaster in CM 1:4 complete all as specified & directed

Material and labour for Vitrified ceramic tiles 10mm thick dark shade (square/rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl screed or bedding layer of mortar 15 mm thick in cm 1:4 for laying floor finishes

All as per item No 69 but vertical surfaces incl 10 mm thick cement plaster in cm 1:4

Material and labour for kota stone slab 20 to 25 of size 600 x 600 mm thick (Pre grinded and mirror polished) bedded, jointed and painted with grey cement slurry incl cutting and grinding/polishing incl 15 mm th 1:6 CM bedding layer incl dismantling.

Material and labour for machine cut cudappa stone slab 20-25 mm thick in perairs over cement screed bed laid and jointed with grey cement slurry mixed with pigment to match to shade of slab including rubbing and polishing and 15 mm thick screed in cement mortar 1:4 complete all as specified complete incl dismantling

Supply and fixing 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification

Supply and fixing Insulated PVC Wall Lining consisting of PVC Insulated Panels with wood grain printed PVC sheet used instead of plain colour sheet. Having expanded polystyrene (EPS) stuck to 2mm thick plain colour PVC sheet duly fitted into the wall as per specifications and drawing

Supply and fixing in repairs for Fancy type powder coated curtain rod 20 mm dia fixed with brackets.

Supply and fixing in repairs for 100 mm Cast iron or malleable cast iron handles, cast type, stove enameled black

Supply and fixing Cast iron (malleable or mild steel) Casement stays, size 300mm, with hinged joint and two plates, with studs complete fixed to steel sashes, including drilling necessary holes or welding etc.

Supply only glass dividing strip 38 mm x 3mm thick , inserted in position in PCC floor

Taking up or down steel tubing and connector 15 mm bore in new or old position (wall ceiling floor etc)

Taking up or down steel tubing and connector 20 mm bore in new or old position (wall ceiling floor etc)

Taking up or down steel tubing and connector 25 mm bore in new or old position (wall ceiling floor etc)

Re-fixing only steel water tubing 15mm bore on walls and ceilings or laid in floors..

Re-fixing only steel water tubing 20mm bore on walls and ceilings or laid in floors.

Re-fixing only steel water tubing 25mm bore on walls and ceilings or laid in floors.

Supply and fixing GI tubing 15 mm bore medium grade with all fittings and fixed complete to walls and ceilings or laid in floors.

Supply and fixing GI tubing 20 mm bore medium grade with all fittings and fixed complete to walls and ceilings or laid in floors.

Supply and fixing GI tubing 25 mm bore medium grade with all fittings and fixed complete to walls and ceilings or laid in floors.

Supply and fixing in repair 15 mm dia Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-110gms))

Supply and fixing in repair 15mm bore stop value of PTMT of any colour screwed for iron pipe comp.

Supply and fixing in repair 20mm bore stop value of PTMT of any colour screwed for iron pipe comp.

Supply and fixing in repair 15mm bore stop valves cast copper alloy fancy type chromium plate with long shank & cup (concrete ealed type).

Supply and fixing in repairs PVC connections 45 cm long incl 15 mm bore fly nuts on both ends complete

Supply and fixing in repairs Bib tap standard or PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm 90gms/20mm-125gms)

Supply and fixing in repairs PVC flexible Waste pipe 32mm dia

Supply and fixing in repairs PVC flexible Waste pipe 40 mm dia

Supply and fixing in repairs taking down high/low level cistern with brackets flush pipe etc complete and supply and fixing PVC low level cistern syphonic action type including inlet ball valve float and handle including brackets of approved make including all connectionSupply and fixing lush pipes for EWC & indian type WC.

Supply and fixing in repairs 75 mm CI floor trap with CP grating incl jointing to waste pipe incl fixed in cement concrete block 30x30x30cm type B1 1:2:4

Supply and fixing sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified. .

Supply and fixing in repair vitreous china white wash hand basin flat back white in colour ISI marked of size 550 mm x 400 mm with chromium plated waste coupling and PVC waste pipe fixed to walls with CI brackets 2 Nos embedded in CM 1:4 type B-1 size 30 xm x 20 cm x 20 cm complete all as specified.

Supply and fixing in repairs vitreous china squatting pan Orissa pattern size 580 x 440 mm white with "P" and "S" trap front or back inlet etc incl provisioning of lime concrete complete all as specified.

Supply and fixing in repair vitreous china wash down water closet, pedestal pattern, white in colour incl white seat cover ISI marked 'P' or 'S' trap, fixing bolt and jointing.

Supply and fixing in repair for Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) Self-closing taps, cast copper alloy, chromium plated, screwed for iron pipe and fixed waste coupling of PTMT (half or full threaded) Minimum weight 32mm-45gms)

Supply and fixing in repair PTMT shower rose 75 mm dia .

Supply and fixing in repair 150mm grating square open able with or without hole for wate pipe incl fixing with white cement

Supply and fixing in repairs Health faucet CP for iron pipes 15 mm bore with all accessories complete.

Supply and fixing 500 ltr capacity Rotational molded polyethylene three layer water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including Dismantling water tanks and removing to store .

Supply and fixing for 2000 ltr capacity Rotational molded polyethylene three layer water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including Dismantling water tanks and removing to store .

Material and labour in repairs for Providing precast cement concrete Type B1 1:3:6(12.5 mm graded stone aggregate) set in CM 1:4 louvers and jallies, 25mm thick (measured solid), including all moldings

Material and labour for providing and injecting emulsion for Anti termite treatment along the external wall below concrete rete or masonry apron using chemical emulsion at the rate of 2.25 liters per linear meter including drilling and plugging holes etc, in Apron.

Material and labour for At points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same.

Material and labour for rendering 15 mm thick on fair faces of brick work or concrete rete surfaces in cement mortar 1:3 and even and smooth without using extra cement including mixing of water proofing compound wherever require(WPC measured separately).

Material and labour for water proofing treatment on horizontal and vertical surfaces with applying of oil bound bituminous primer @0.20 Kg/Sqm and providing 4 mm thick APP modified water proofing membrane weighing not less than 4.00 kg/sqm reinforced with non woven polyester matt weighing not less than 160 gms/sqm including minimum 10 cm side over laps and 15 cm end lap torch sealed and bonded as per detailed procedure on note No 6 of TD drawing No AFB/TD/260/06 sheet No 1/1(R) and applying a coat of blown grade @1.2 kg per sqm hot bitumen 90/15 over and below the membrane finished with solar reflective bituminous aluminium paint/primer @0.1 Kg per sqm all as specified and as directed including Removing complete existing treatment on roof surfaces surfaces by picking , sweeping clean and washig down with water to remove dust, etc.

Material and labour for Providing, cement concrete rete 1:3:6 type C1( using 20 mm graded stone aggt) in window or door cills, lintels, bressummers, steps, quoin blocks (for use with masonry), string courses, copings, kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling), corbels, brackets, etc.(of any section indicated), with plain fair faces, including chamfers weathering, throating etc. and setting in mortar complete with joints to match including ncessary form work.

Material and labour for preparation of old decorated wall surfaces and applying one coat of white wash all as specified.

All as per item No 115 here-in-before but on ceiling

Material and labour for washing, rubbing down and stopping of distempered surfaces of walls and applying one coat of distemper oil emulsion all as specified

Material and labour for washing, rubbing down and stopping of distempered and painted surfaces of walls and applying one coat of cement base paint all as specified

Material and labour for preparation of old painted wall surfaces and applying one coat weather proof paint all as specified and directed

Material and labour for preparing old wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint all as specified and directed

All as per item No 120 hereinbefore but on steel surfaces.

S&F in repairs for 7 feet 4 pipes pulley operated cloths drying system consisting of aluminium pipe of outer dia 22 mm, inner dia 19.8mm, pulleys made up of delrin with rope guide mounted on channel pair of length 24" (distance between two pipes is adjustable) Locking system to hide rope knot, channel to be mounted or fixed with self tapping screws provided in kit. Rope will be polyester braided undyed of 4 mm dia fixing to ceiling/ wall as specified and directed by Engr-in-Charge and minimum weight of rope shall not be less than 7700 Gms/unt(for 04 pipes)

Dismantling wrought iron or mild steel work of any description not otherwise provided for

Material and labour for MS tubular medium grade as in posts, purlins including distance pieces, cleats etc complete using ERW or induction butt welded tubes conforming to IS 1161-1998 grade St-240

Material and labour two coats of synthetic enamel painting over a priming coat of red oxide, zinc chrome primer incl preparation of previously untreated new surfaces of steel and iron exc 10 cm width or girth.

Dismantling of timber scantling 40 Sq cm and over in section in any position in framed work

Material and labour for Second class hard-wood in scantlings clean sawn fixed to RCC, wooden post and wooden purlins incl drilling for nut and bolt

Dismantling wall and ceiling boards any description, any thickness, including cover fillets and frames

Material and labour anodised aluminium powder coated snap grid frame work size 605 x 605 mm for false ceiling including hangers 6 mm dia GI (up to 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia 40 mm long and 6 mm thick non asbestos fiber cement building boards fixed or laid/inserted to timber/GI/Aluminium frame work with screws fixed in ceiling flat or sloping. complete all as specified. all as specified.

Material and labour for 6 mm thick ceiling with calcium silicate board of silicon and calcareous material reinforced with cellulose fiber for fixing in 600 x 600 mm fixed to exposed metal frame/alu frame grid .

Dismantling of AC or corrugated, semi corugated,etc. Sheet roof coverings

Supply and fixing 6 mm thick asbestos cement, corrugated or semi corrugated sheets in roofs, walls etc. fixed with L type or J type or cank hook bolts.

Supply and fixing Asbestos cement two piece adjustable plain wing ridge 6mm thick fixed with L type or J type or crank hook bolts.

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering

Supply and fixing Pre- painted galvalume aluminum zinc coating GI based corrugated steel based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to roof covering/cladding to wall, fixed with self tapping screws as specified.

Supply and fixing Pre- painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Maruthi constructions

manoj builders and consultants

BYRAVESHWARA CONSTUCTION