Tiruvannamalai City Municipal Corporation Providing water supply arrangments Existing Well at Peygopuram street in Ward No.14 in Thiruvannamalai City Municipal Corporation

Hire charges for pumpset upto 3.00H.P for dewatering purpose

Desilting the well using needed machinery and labours etc.complete

Disposal of desilted material and waste etc min.three k.m. of lead including hirecharges for transport vehicle ,loading,unloading etc.complete

Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand,silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering, ,and baling out water and cleaning and levelling the site etc.,complete 10 m3

Plain Cement Concrete 1:2:4 (one cement, two fine aggregates and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification

Cutting open CC Road for Pipe laying etc., complete complain with standard specification.

Supply and fixing of following materials including cost and conveyance etc., complete.

32 mm dia HDPE Hose

32 mm dia GI Bend

32 mm dia GI Clamp set

32 mm dia GI Coupling

32 mm dia GI Flange set

32 mm dia GI Union

32 mm dia GI Pipe

32mm PVC pipe

32 mm dia PVC Bend

32 mm dia PVC Coupling

Nylon rope for borewell

32 mm dia PVC Tee

25mm dia pvc pipe

25mm dia pvc elbow

25mm dia pvc coupling

25mm dia pvc tee

Supply and fixing of M.S Grills with Doors and Windows with one coat of Red oxide with Primer including all costs such as welding,grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification.

Supply and fixing of Weld Mesh with one coat of Red oxide with Primer including all costs such as welding,grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification.

OPENWELL SUBMERSIBLE PUMPSET AS PER IS 14220 / 2002 WITHOUT PANEL BOARD Supply and delivery of Open well Submersible pump set conforming to IS 14220 /2002 and as amended thereafter and BEE 3 Star Rated capable of discharging the following duties due to all causes. The pump shall be with stainless steel shaft and dynamically balanced bronze mixed type impeller, CI FG 200 grade casing and brass screws and rotor shall be of copper rod as per IS 613/1984 with ISI mark. The pump suitable for installation in sump with 1.1KV grade 3 core suitable copper flat submersible cable to a length of 15m with necessary cable joints. The non-return valve located at the top of the pump in the discharge outlet connection is to be designed with minimum friction. The pump should be directly coupled to 2880 RPM, three phase, 50 Hz (±5), 415V+6% & 415V-15% squirrel cage induction motor suitable for DOL upto 5 HP, Fully Automatic Air break Star Delta up to 20 HP and Auto Transformer starter for above 20 HP starting and for continuous operation.(50x75)wd-M1706

THREE PHASE PANEL BOARD- D.O.L WITH TWO LEVEL GUARD AND AUTO START Supply and delivery of direct online starter confirming to IS13947, IEC60947-1 and as amended thereafter with suitable KW rating for operation in AC/Three Phase/50HZ(± 5%) and 415 V(±10%) including Ammeter, Voltmeter, Thermal Overload relay, 16 Amps 2 pole Magnetic Contactor with under Voltage protection, Indication lamp, starting capacitor, running capacitor and On/Off Push button switches, 5 way connector, wiring with 1 sq. mm/1.5 sq. mm copper PVC insulated cable, powder coated vermin proof box including the capacitor (the cost of capacitor is to be taken separately).3HP-WD-M 1910

Supply and delivery of 2.50 Sq.mm copper submersible PVC insulated and sheathed 3 core plate type confirming To IS 694/77 with ISI Mark.

Supply and Delivery of following electrical materials including cost and conveyance etc., complete as per standard specification.

7/20 copper wire (SD.66)

Labour charges for the erection of submersible pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days.(TWAD PG.NO 308)

Laying PVC Pipe and specials to trench and laying to proper grade and alignment, jointing with PVC couplers with cement paste

Refilling trenches with exacavated soil in layers not exceeding 20cm in depth, ramming and consolidation of each layer, watering etc. all complete as per standard specification and as directed by the departmental Engineer.

Supply and delivery and fixing of HDPE tank as per IS 12701/1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc., (1000 Litres capacity)

Construction of HDPE Tank Stange Earth Work, PCC 1:4:8 mix, Centering, Brick Work, Plastering, Cement Paint including cost and conveyance of all materials and all labour charges etc., complete as per standard specification

Supply and delivery of MS KIOSK of size 0.75 x 0.45 x 0.75m made up MS angle of size 50mm x 50mm x 3mm alround coverd with 18 gauge MS up of MS plates of size 25mm x 3mm including cutting Welding Grinding, Locking arrangements and Labour charges etc., complete for fixing of meter board. Switch board with MS door and lock and key arrangements (Page No:83)

Construction of Meter box with brick work (with approved chamber class II bricks of size 9" x4 3/8" x23/4" in CM 1:5 and plastered with CM 1:5, 12mm thick outside as per type design with foundation concrete 20mm thick in CM 1:4:8 using 40mm HBG, as directed by the Engineer in -charge. The rate shall include earthwork, gravel filling, palstering and painting complete as per standard specification and directed by the Department Engineer.

Earthing as per P.W.D standard with an earth electrode of 2mtr . Class 'B' GI Pipe of a dia not less then 32mm complete with necessary masonry work. (PWD Ele.Data-Sl.No-234) SD234

Sub Total