REPAIR TO WALL PLASTER FLOORING CHHAJJA STAIR RUNG PLINTH PROTECTION ETC IN MD AND OTM ACCN AT AUNDH UNDER GE MH AND RH KHADKI

Amount

Taking down cement or cement lime plaster from brick / PCC block mansonary walls etc including racking out joints, hacking for key scrubbing down with water etc, all as specified and directed.

M&L rendering 15 mm thick (10mm + 5mm) plaster on fair face of brick work in CM 1:4 and finishing surface even and fair by mixing liquid water proofing compound as per manufacturers instructions complete. Note :- Liquid WPC shall be measured & paid seprately under relevant item of this BOQ.

M&L for providing water proofing plaster at the junction of wall and slab at chajjas, lintels etc, of average thickness 20mm in CM 1:3 mixing with liquid water proofing compound all as per manufactureres instructions, finishing the surface even and smooth without using extra cement all as specified and directed Note :- Liquid WPC shall be measured & paid seprately under relevant item of this BOQ.

Supply only liquid water proofing compound hydroseal-W+ or eqivalent (for plaster hardening, to control efflorescence & fungal growth) as approved by GE.

M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint including scaffolding, trestles, ladders, cradles and necessary safety measures complete all as specified and as directed.

M&L for complete removal of existing treatment of old surfaces and applying two coats of cement base paint over coat of primer including preparation of surface & including scaffolding, trestles, ladders, cradles and necessary safety measures complete including cutting / uprooting vegetations growth all as specified and directed by Engr-in-Charge.

M&L for rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth (without using extra cement ) complete all as specified and directed

M&L for of preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of alkali resistant primer finishing surfaces even and smooth, complete all as speciified and directed

M&L for complete removal of existing finishes and applying two coats of oil bound distemper on walls over a coat of alkali resistant primer including preparation of plastered surfaces complete all as specified and directed

M& L for complete removal of existing finishes and applying two coats of white wash on walls including preparation of old surfaces all as specified and directed.

M&L for rendering 10 mm thick on concrete surface in CM 1 :4 as in ceiling etc all as specified and directed.

M&L for preparation of newly plastered surface and for applying three coats of white wash on ceiling all as specified and directed.

M&L preparation of old plastered surfaces applying of one coat of white wash on ceiling all as specified and directed.

Taking down shutters of any description exceeding 1.00 Sqm and n.exc 2.00 Sqm each and refixing the same after easing and adjusing in same opening all as specified and directed.

Dismantling/demolition floor, hearth or wall tiling including cement mortar bedding/complete and removing rubbish off the premises complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level ) and removing the same off the premises all as specified and directed.

M&L Coloured Non Skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tile laid over and including 15 mm thick screed bed in CM 1:4 complete all as directed.

All as per item No 17 above but as in dado/skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick backing coat in CM 1:4, set and jointed in neat white or coloured cement to match with the colour of tiles complete all as specified and directed.

M&L Coloured Non Skid ceramic joint free tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tile laid over and including 15 mm thick screed bed in CM 1:4 completeall as directed.

All as per item No 19 above but as in dado/skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick backing coat in CM 1:4, set and jointed in neat white or coloured cement to match with the colour of tiles complete all as specified and directed.

M&L Coloured Vitrified tiles 10 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tile laid over and including 15 mm thick screed bed in CM 1:4 complete all as directed.

M&L glazed ceramic tiles (350x250x7mm or 450x300x7mm) colour tiles on walls etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tile laid over & including 10 mm rendering in CM 1:4, all as specified and directed.

M&L glazed ceramic tiles in vertical surface 300 x 200 x 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tile laid over & including 10 mm rendering as in backing coat in CM 1:4, all as specified and directed.

M&L for 25 mm thick cement concrete M-15 grade (Nominal mix) using 12.5 mm graded stone aggregate as in levelling course complete all as specified.

M&L for 75mm thick PCC M-7.5 grade (Nominal mix) using 40mm graded stone aggregate as in sub base to floor finish complete.

M&L for Pre polished Chequered rubburised and glossy finish cement tiles 30cmx30cmx 25 mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 20mm thick screed bed in cement mortar 1:4 completed.

M&L for minimum 25mm thick crushed stone dust filling under floors as cushioning for laying of interlocking tiles as specified and directed.

S&F Machine pressed precast pre-polished rubburised concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade incl all as specified and directed by Engineer-in Charge.

M&L for 75mm thick PCC M-10 grade (Nominal mix) as in plinth protection finishing the surface even and smooth without using extra cement.

Demolition of Stone slabs and tiles of any description or thickness laided bedded and pointed in any cement mortar in floors, aprons etc.

M&L for 18-20 mm thick machine cut machine polished kota stone slab flooring in flooring but one piece as in treads of straircase etc laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing moulding , over and including 15 mm thick screed bed or bedding in CM 1:3 for laying floor finishes, all as specified and directed.

All as item No 31 here in before but in one piece on vertical surface as skirting over and incl 10 mm thick rendering as in backing coat in CM 1:3 to receive kota stone/slab etc all as specified and directed.

M&L for 18-20 mm thick Granite slab achine cut bedded and jointed with grey cement and pointed and adhesive of pigment to match the shade including cutting with polshing rounding moulding etc, laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1 :4, all as directed.

All as per item No 33 above here in before but 20 mm thick Machine cut Cudappah stone in floor or in any position of any colour and shape as specified and directed.

M & L for Polishing of old existing Kota stone flooring i.e, cutting , grinding, joints pigment filling and polishing to get mirror finish all as specified and directed.

Demolition of brick work, PCC block mansonry or stone boulder masonary built in cement mortar including all quoins arches pillars etc. but excluding ashlar facing dressed stone work and precast concrete articles.

M&L for Pre-cast cement concrete block masonry of PCC 1:3:6 Type C1 using 20mm graded stone aggregate with solid blocks straight or curved on plan, exc 6m mean radius and exc. 10 cm in width and setting in cement mortar 1:6 complete all as specified and directed by Engr-in-Charge.

Taking up or down 15 mm bore steel tubing and connections, including cleaning for re-fixing or removal to store.

Supplying & fixing to walls and ceiling 15 mm nominal bore, medium grade, galvanised coated steel tube conforming to IS 1239 (Part-1): 2004 including all fittings conforming to IS 1239 (Part-2): 2011 complete all as specified and as directed.

Re-fixing 15mm bore old steel water tubing and connections in new or old position of walls, ceiling, floors etc with new fittings complete. Note: Serviceable pipes obtained shall be re-used

M&L for cutting chases, pinning in concrete block walls, making good to facing where required and pointing in cement mortar 1:3 and making good , cutting n.exc 10cm girth all as specified and directed.

Taking up or down 20 mm bore steel tubing and connections, including cleaning for re-fixing or removal to store.

Supplying & fixing to walls and ceiling 20 mm nominal bore, medium grade, galvanised coated steel tube conforming to IS 1239 (Part-1): 2004 including all fittings conforming to IS 1239 (Part-2): 2011 complete all as specified and as directed.

S&F in repairs 15mm dia bore Bib taps, cast copper alloy CP with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed

S&F in repairs 15mm Brass CP wall mixer for mixing hot & cold water screwed down for iron pipe and fixed all as directed.

S & F in repair PVC valveless syphonic action type flushing cistern (Low or high level) of 10 litre capacity, white/coloured with inlet ball valve, float, handle including fixing brackets and 32 mm bore PVC flush pipe etc complete all as specified and directed.

S & F in repairs Vitreous China Squatting pan Orissa pattern long pan, size 580 mmX440mm white with `P' or `S' trap, front or back inlet and foot rests any pattern including connection to trap and to flushing pipe, anti-syphonage pipe etc, including trap set in and including concrete complete including making good to floor all as spfd and directed.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white fixing bolts (excluding flushing cistern) but including flush pipe, connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe complete, all as specified and directed.

M&L for 40 mm thick PCC M-15 grade(Nominal Mix ) using 12.5mm graded stone aggregate as in path, floor, parking etc construction joint at 2 mtr interval and from wall will be filled by mastic all as specified and directed.

S&F in repairs 100 mm bore Cast iron spun pipe, waste and vent pipes, in any length with or without ears with cement joints, laid in trenches or in floors.

S&F in repairs 100 mm bore Cast iron floor trap with grating including jointing to waste pipe and fixed with PCC 15 grade(Nominal Mix ) using 20mm graded stone aggregate , all as specified and directed.

S&F 75mm dia PVC (SWR) pipe type 'A' in floor or in trenches complete all as specified and directed including taking down existing pipe.

M&L for 100 mm thick PCC M-15 grade(Nominal Mix ) using 12.5mm graded stone aggregate as in path, floor, parking etc construction joint after every 2 mtr interval and from wall will be filled by mastic all as specified and directed.

VP DEVELOPERS AND CONTRACTOR

MAHESH DADAJI BACHHAV

S.R.M.K Enterprises

M/S K.D.MATE

M/S J J ENTERPRISES

M/S SANDEEP CONSTRUCTION COMPANY