Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹40.0 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹40.6 L+₹65,212.53 (1.63%)Rejected-Finance | L2 | Rejected-Finance Quoted High | |
| 3 | Rejected-Technical | - | Rejected-Technical Non-responsive |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
28 Nov 2022, 2:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Divisional Forest Officer
Chirang Division Kajalgaon
Construction of Range Quarter at Amteka Range under Chirang Division, Kajalgaon under SOPD Fund for the year 2022-23.
2022_BoTC_27824_1
CRD/6 of 2022-23
Open Tender
Civil Works
Item Rate
180 days
Chirang
Please refer Tender documents.
4 documents required · 4 mandatory
₹800
₹80,000
Yes
18 Jan 2023
18 Nov 2022
28 Nov 2022
18 Nov 2022
28 Nov 2022
18 Nov 2022
Amount
Earth work in surface excavation not exceeding 30cm in depth but exceeding 1.5m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50m and lift upto 1.5m as directed by Engineer-in-Charge. All kinds of soil
Providing brick soling in foundation and under floor with stones/ best quality picked jhama brick and sand packed and laid to level and panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering completed. (b) Brick on edge soling
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering- All work upto plinth level 1:3:6 (1cement: 3 manufactured sand derived from recycled concrete aggregate (RCA): 6 graded stone aggregate 20mm nominal size recylced aggregate (RA).
Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in cement mortar 1:4 (1 cement: 4 coarse sand).
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50m and lift upto 1.5m.
Providing and laying plain/ reinforced cement concrete works cement with coarse sand & 20mm down graded stone aggregates including dewatering if necessary and curing complete but excluding cost of formworks and reinforcement for reinforced cement concrete works (form work and reinforcement will be measured and paid separately). (a) M15 or proportion 1:2:4
Providing and laying plain/ reinforced cement concrete works cement with coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of formworks and reinforcement for reinforced cement concrete works (form work and reinforcement will be measured and paid separately). (b) In super-structure from plinth level upto the first floor level ii) Column, post, pillars, struts, suspended floor roof, landing, shelf and support balcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase and landing) including preparing the top surface and finishing of nosing (b) M20 in proportion 1:1.5:3
Providing formworks of 12mm thick plywood board so as to give a rough finish including centering, shuttering and propping etc. height of propping and centering below supporting floor to ceiling i) Using 25mm thick plank. Foundation, footings, bases of columns etc.
Brick work with clay fiyah F.P.S. (non modular) brick of class designation 7.5 in superstructure above plinth level upto floor five level in.
Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. code for RCC works including straightening, caring and bending to proper shapes and binding with 20G annealed black wire etc.
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately) Kiln seasoned and chemically treated hollock wood
Providing fitting and fixing 1/3 panelled 2/3 glazed wooden shuttering for door windows including B) With 1st class local wood i) 35mm thick shutters.
15mm cement plaster on rough side of single or half brick wall of mix 13.5.1 : 1:4 (1cement: 4 coarse sand)
15mm thick cement plaster in single coat on fair side of single or half brick wall for interior plastering upto 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth inlcuding curing complete as directed. b) In proportion (1:3)
Structural steel work riveted bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete (50mm dia).
Providing corrugated G.S. sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63mm thick with zinc coating not less than 275 gm/m2
Providing ridges or hips of width 60cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete.
Pre-cast cement concrete tiles 20mm thick with aggregate of sizes upto 6mm laid in floors, treads of steps and landing with 20mm thick bed of cement mortar in proportion with 20mm thick bed of cement mortar in proportion 1:6 joint with neat cement slurry with pigment to match the shades of the tiles complete with precast tiles. b) Any shade or combination of shades using approx. 50% white cement and 50% grey cement.
Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position with necessary stainless steel screws etc. Kiln seasoned and chemically treated hollock wood.
Providing and fixing insulating board ceiling of approved quality with necessary nails etc. complete (frame work to be paid separately). White face insulating board.
Color washing with lime on wall surface two coat to give an even shade including thoroughly brooming the surface to remove all dirt, dust, mortar drop and other foreign matter.
Providing surface preparation for walls, ceiling etc. using average 1.50 mm thick plaster of paris including clearing, rubbing with sand paper, filling gaps, depression etc. where necessary with chalk powder and plaster of paris paste, making the surface even and smooth complete at all levels as specified and directed.
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain white color board for backing of cup boards and bathroom/ kitchen cabinets etc. of required size comprising of virgin polymer of K value 58-60 (Suspension Grade) calcium carbonate and natural fibres (wood powder/ rice husk/ whet husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 560 kg/ cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modules of elasticity 850 N/nm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, charge. 12mm thic
Providing and fixing PTMT handles with necessary screws etc. complete 125x34x24 mm weighing not less than 23gms.
Providing and fixing powder coated telescopic drawer channels 300mm long with necessary screws etc. complete as per direction of Engineer-in-Charge.
Providing & fixing decorative high pressure laminated sheet of plain/ wood grain in glood/ matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS:2046 Type S, including cost of adhesive of approved quality. 1.5mm thick
Providing and fixing concealed hinge of approved quality for 19-20mm thick door with stainless steel screw complete. Angle Kabja
Wall paining (two coats) with acrylic emulsion paint of approved brand and manufacture on new surface to give an even shade after thoroughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth. Approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac/ La Greens/ Flixo Paint/ Arya paint). A) Acrylic Emulsion paint
Providing fitting and fixing MS grill of required pattern for windows/ clerestory windows/ openings with MS flat at required spacing in frame all round, square or round MS bar with round headed bolts and nut or screws.
Excavating, supplying and filling of local (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of earth in layers not exceeding 20cm in trenches, plinth, sides of foundation etc. complete. Low side area filling
Providing fitting and fixing white vitreous water closet squatting pan (Indian type pattern) of size 580 x 240mm.
Supplying, fitting and fixing PVC pipes of 6 Kgf/cm2 (Supreme/ Prince) or other ISI approved including joining, fitting and fixing with clamps …. etc.(a) In exposed surfaces or in trenches (ii) 110mm dia
75mm dia
Supplying, fitting and fixing 87.5 degree PVC bend of (Supreme/ Prince) or other ISI approved including joining, fitting and fixing with clamps etc. … (a) In exposed surfaces or in trenches (ii) 110mm dia
75mm dia
Supplying, fitting and fixing PVC reducer of (Supreme/ Prince) or other ISI approved including joining, fitting and fixing with clamps etc. (a) In exposed surfaces or in trenches (iv) 110mm x 75mm
Providing, fitting and fixing 75mm dia PVC cowel of ISI make complete as directed and specified.
Supplying, fitting and fixing pipes with all necessary fitting in exposed or in trenches etc.
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12702 marked, with cover and suitable locking arragement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
Providing and fixing stainless steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40mm including paining of fitting and brackets, cutting and making good the walls wherever required: 510 x 1040 mm bowl depth 250mm
Boring with 100mm diameter casing pipe for hand pump/ tubewell, in all soils except ordinary hard rocks requiring blasting, including removing the casing pipe after the hand pump/ tube well is lowered and tested. Beyond 12m and upto 18m depth.
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fitings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 80mm nominal dia pipes.
Providing and fixing wash basin with C.I. brackets, 15mm CP brass pillar taps, 32mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require. White vitreous China wash basis size 630 x 450mm with a pair of 15mm C.P. brass pillar taps.
Water Pump Motor set
Display Board
Electricity fittings (4%)
ALBERT NARZARI
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .