SITC of 01 No. Diesel Generator Set along with wiring of Generator Room at Administrative Block of DIET, Garacharma under EandM Division, APWD, Prothrapur SW SITC of 01 No. DG Set

Supply, Installation, Testing and Commissioning of "KIRLOSKAR" (KOEL) Make 4K1080ETA 4G1_Model or its equivalent,156 HP @1500 RPM, FOUR Cylinder, Vertical, Water Cooled Diesel Oil Engine Directly Coupled with "KIRLOSKAR" (KOEL) Make AC Alternator, 3 Phase, 415 Volts, 50 Hz @0.8 P.F, Self Excited, Self Regulated Designed to Run at 1500 RPM 100KW/125 KVA DG set with 12V, 180 AH Battery and Leads and accessories in all respect. Acoustic Enclosure(Sound Proof) as per Central Pollution Control Board (CPCB-IV+) approved DG Set including. *Including Kirloskar Remote Monitoring System.

Designing, Supplying and Commissioning of Automatic Main Failure panel for 125 KVA Capacity Generator Set of Suitable Size with following technical Sp[edification with Micro Processor Unit. a) Electricity Board Supply loading/Unloading in Off/Manual/Auto mode. b) Selectable Auto/Manual Start/Stop of the Generator. c) Selectable Auto/Manual Loading/unloading of the generator. d) Interlocking loops with solid state logic circuit to avoid shorting of EB supply side and generator supply side. e) Short circuit protection system for both EB and generator side. f) Overload protection system for generator. g) Single phase preventing system. h) Phase sequence sensing system. i) Time Sensing system for all operation. j) Digital monitoring system for voltage, amps and Frequency. k) Short circuit protection for DC Circuit. l) By Pass Arrangement

Supplying of following XLPE insulated LT power unarmoured Copper cable of 1.1 KV grade conforming to IS 7098 (Part-I) as applicable Make: Glooster/ Havells/ Polycab/RR Cable etc as reqd. a) 120 mm sq. X 3.5 Core

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. a) Above 95 sq. mm and upto 185 sq. mm

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. a) Above 95 sq. mm and upto 185 sq. mm (clamped with 25/40x3mm MS flat clamp)

Supplying and laying of one number double walled corrugated high density Polythylene pipe having corrugation on the outer wall and plain surface inner wall confirming to IS 14930 Part -I complete with necessary HDPE fitting for protection of 1.1 KV grade underground cable directly on the Surface or Wall etc as required. a)120/103 mm

Supplying and laying of one number double walled corrugated high density Polythylene pipe having corrugation on the outer wall and plain surface inner wall confirming to IS 14930 Part -I complete with necessary HDPE fitting for protection of 1.1 KV grade underground cable directly in Ground at the depth of 50 cm etc as required. a)120/103 mm