ADDN/ALTN TO BLDG NO. T-14, T-15 AND T-16 AND DEMOLITION OF BLDG NOS. T-61, T-11, T-12, T-15 AND T-25B AT AFS BEGUMPET UNDER GE (AF) HAKIMPET

Amount

Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles.

Material and labour brick work with fly ash bricks straight or curved on plan exceeding 6 M mean radius built in CM 1:6 etc Complete all as specified and as directed

Dismantling timber scantlings 40sq. cm and over in section, in any position.

M&L for Second class hard-wood in scantlings clean sawn timber framed and fixed.

Fixing only Second class hard-wood in scantlings clean sawn timber framed and fixed.

Preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with a coat of Creaosote oil.

Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings.

M&L for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed by Engineer-in-Charge.

M&L for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof ridges, fixed with self tapping screws as specified and directed by Engineer-in-Charge.

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. (fe 410 w gde 250A quality) all as specified and as directed.

Demolition of cement concrete (unreinforced and including tiles) in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removal of debris outside MD land all as specified and directed by Engineer-in-charge.

M & L 25 mm thick Cement concrete type B-1, 1:2:4 (20mm graded aggregate) in Sub-floors, sub-bases, Floors and Pavings, etc.

M & L for Plain Cement concrete type C-2 1:3:6 using (40mm graded crushed stone aggregates) 75mm thick as in plinth protection, path/hard standing, sub base, floor finish complete all as specified and directed.

M & L chequered cement concrete tiles with gray cement and pigment 300x300x25mm machine pressed set and jointed and pointed in neat cement slurry in floors.

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises outside low lying area all as specified and directed by Engineer-in-Charge.

M&L for Non skid ceramic joint free coloured tiles 7 to 8mm thick (Square/ Rectangular) design area exceeding 0.06 sqm but not exceeding 0.11 sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match.

M&L Non - skid Ceramic tiles 7 to 8 mm thick coloured tiles (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match

M & L for Screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar 1:6.

M&L for glazed ceramic 350 x 250x 7mm/ 450mm x 350mm x 7mm tiles (coloured) on vertical surfaces set and jointed in neat cement slurry pointed in white or colour cement to match all as specified and directed by Engineer-in-Charge.

M & L for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 for backing of Dado/Skirting

M & L 18 to 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. Mirror polishing and edge rounded all as per specified for steps

Taking down Chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m each with shutters (without taking off shutters from the frames)

Taking down shutters of any description exc 1 sqm and n.exc 2 sqm each

M&L for 35mm thick Glazed and skeleton factory made shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkat.

M&L for 35 mm thick 2nd class hardwood plain, framed, factory made panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkat.

Taking down Chowkhats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frmes).

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification and as directed by Engineer-in-Charge.

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded

Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars

M&L Steel ventilators with centre hung shutter including two pairs of brass cup pivots, catch spring and pulley wheel, complete all as specified and directed.

S & F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe-290 Gde E-165, complete all as specified and directed.

Hacking out old broken glass (any thickness, size,quality or description ) from steel wooden frames, glazed with beads

S&F 3mm thick Sheet glass, ordinary quality fixing with putty/beading in square in each pane.

S&F 3mm thick sheet glass ordinary quality frosted fixing with putty in square n.exc 0.5 sqm in each pane

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples

M&L Preparation of new wooden Surfaces of any description over 10cm width or girth and appling two coats of synthetic enamel paint over a coat pink primer.

M&L Preparing new steel Surfaces of any any description over 10cm width or girth and appling two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete.

Supply and fix Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring of 150 MM long. fixed in floor

S&F 100mm long MS Butt hinges, medium weight cold rolled.

S&F 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy.

S&F ISI marked 150mm long aluminium anodised barrel tower bolt of extruded section

S&F ISI marked 150mm long Extruded aluminium alloy handles, fabricated type, anodised.

Demolition Wall and ceiling boards (fibre, pulp, insulation, etc.) any thickness, including cover fillets/frame/hangers etc all as specified and directed by Engineer-in-Charge.

S&F Anodised aluminium snap grid frame work size 605 x 605mm for false ceiling and Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm including S&F Non asbestos fibre cement building boards 4 mm thickness fixed or laid/inserted to timber/GI/Aluminium frame work with screws including preparation of new surfaces of ceiling and applying three coats of white wash complete all as specified and as directed.

Taking up or down steel tubing and connections15mm bore including cleaning for refixing or removal to store all as specified and directed.

Taking up or down steel tubing and connections 20 mm bore including cleaning for refixing or removal to store all as specified and directed.

M&L cutting chases, groove cutting, in stone walls, pinning in, making good to facing where required and pointing in cement mortpor 1:3 for concealed water tubing and making good, cuting exc, 10 cm but n.exc 20 cm girth.

S&F steel water tubing 15 mm bore medium grade' galvanised, with all fitting such as bends, tees, nipples, elbows, reducers, etc, fixed complete to walls and ceilings or laid in floors all as specified and directed.

S&F steel water tubing 20 mm bore medium grade' galvanised, with all fitting such as bends, tees, nipples, elbows, reducers, etc, fixed complete to walls and ceilings or laid in floors all as specified and directed.

S&F in repairs of Vitreous china wash basins, white, flat back, size 550x400 mm including brackets, waste fittings, brass, chromium plated 32 mm with long screwed shnks and fly nuts, flanged end bedded in red lead cement and other end fixed, screwed type high presure with long screwed shanks and fly nuts, PVC waste pipe of 32 mm bore 75 cm long complete all as specified and directed by Engineer-in-Charge.

Supply and fix vitreous china squatting pan orissa pattern size 580 mm x 440 mm white with integral foot rests complet in repairs, including provision of concrete bedding all as directed by Engineer-in-Charge.

Supply and fix in repairs Vitreous China wash down water closet pan (pedestal pattern), white including removing the existing one complete and making good all connections as in repairs all as specified and directed.

S&F in repairs 10 litre capacity PVC low level flushing cistern with ball valve and handle/push button 32mm dia PVC flush pipe including taking down unserviceable cistern complete as in repairs all as specified and directed.

S&F 75mm repair PVC (SWR) floor trap including grating, set and jointing with solvent cement 75 mm dia.

Demolition and breaking up of AC/PVC drain pipes 100/75 mm dia set in CM

S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/floor incl all necessary fittings all as specified and directed by Engineer-in-Charge.

S&F 110 mm bore PVC (SWR) bends with access door any radiuis all as specified and as directed

S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors all as specified and as directed.

S&F 75 mm bore PVC (SWR) bends with access door any radiuis all as specified and as directed

S&F 110 mm bore PVC (SWR) junction single, (single T) all as specified and as directed

S&F 110 mm bore PVC (SWR) junction single, (single T)with access door all as specified and as directed

S&F 75 mm bore PVC (SWR) junction single, (single T)with access door all as specified and as directed

S&F stainless Steel sink with drainage board 304 grade made of stainless steel 1 mm thick kichen with plugs washers and wastes, including fixing cantilever brackets and connecting union to pipe over all size 915 mm X 460 mm with bowl size 410 mm X 330mm X 160mm including PVC waste pipe of 38 mm bore and 75 cm long

S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/floor incl all necessary fittings all as specified and directed by Engineer-in-Charge.

S&F SS toilet paper holder with flap make JAGUOR code no AKP 35735 equivalent in Hindware

S&F health faucet with fluxi pipe and hand shower, the length of hose 1mtr fitted to the tap make JAGUOR Code ALD CHR 565 or equivalent in Hindware.

S&F CP 2 way bib cock Make JAGUOR cat No 38041 or equivalent in Hindware.

S&F Chromium plated Angular stop cock 15mm Make: JAGUOR cat No 23053 or equivalent in Hindware..

S&F 15mm bore ISI marked CP Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed

S&F PVC connection 15 mm size with PTMT nuts of length 450 mm

S/F looking mirror of any size rectagular fancy type having boarders of glass fixed to wallscomplete all as specified by engineer in charge. Make: Gumaxy or equivalent as approved by GE

S & F for Chromium plated wall mixer 3-in-1 system with provision of for both hand shower & over head shower complete with 115mm long bend pipe on upper side, connecting legs & flanges (without hand and overhead shower) Make :- Jaquar code No. CQT-CQT-23273UPR or Hindware

S&F single towel rail 600mm long fixed in repairs all as specified and directed Make JAGUOR Cat No : CAN 1111NM or equivalent

S&F Soap dish holder Make JAGUOR Cat No : 35731 or equivalent in Hindware

M&L for 25mm dia Stainless Steel Curtain Rod fancy type complete all as specified and directed

M&L for Brackets, ends Cap and Holder suitable for 25mm dia Stainless Steel Curtain Rod fancy type complete all as specified and Approved.

Taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc., and removal of debris outside MD land.

M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces CM 1:6 finished smooth and even without using extra cement.

M&L for Rendering 15mm thick on fair faces of brick work or concrete surfaces CM 1:4 all as specified and directed by Engineer -in-charge.

M&L for complete removal of existing treatment (upto plaster surface) of old painted surfaces priming plastered and other surfaces and applying with alkali resistant priming paint including 2mm thick wall care putty and applying two coats of distemper oil emulsion on surfaces of walls.

M&L for complete removal of existing treatment (upto plaster surface) of old painted surfaces and applying two coats of cement base paint on surfaces of walls.

M&L for preparing New plastered surfaces and applying two coats of distemper oil emulsion including chalk whitening preparatory to distempering on surfaces of walls including 2mm thick wall care putty comple all as specified and as directed

M&L for preparing new plastered surfaces and applying two coats of cement base paint on surfaces of walls.

M&L For preparing old surfaces of walls by brooming down and applying one coat of white wash complete all as specified and as directed.

Removing demolished materal/soils/Debris to out side MOD land depositing where directed at a level not exc. Starting point all as specified and as directed.

Dismantling of of water tank (PVC) exc 500 n.exc 1000 Ltrs capacity and remove store.

S & F Rotational moulded PVC water storage tanks 500 Ltrs capcity (cylindrical vertical with closed top) hoissted and fixed in position all as specified

S&F in repairs Ball valves high pressure of PTMT with eppoxy coated Aluminium rod & high density plastic ball screwed for iron pipes and fixed 25 mm bore (Minimum weight 455 gms)

S & F in repairs over head shower 150 mm dia round shape single flow brass body chrome plated with grey face plate with self cleaning function Make Jaguar Cat No OHS-1801

S & F 150 mm long Blank hinge, brass, bright polished, for use alongwith brass double action spring hinges complete

Dismantling Single layer mangalore pattern or similar tiles in roofing

Demolition of Reinforced Cement concrete in roofs, floors (other than ground floors), beams staircases, landing, chajjas and similar suspended work.

Dismantling of framed fillets, rails, posts, rafters, purliins etc., under 40 Sq. Cm in section.

Taking down of wooden roof trusses, coupled rafters or trussed beams Above 4 metres & upto 8 metres.

Dismantling of Wall and ceiling boards (fibre, pulp, isulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed by Engineer-in-charge.

Taking down Chowkats or frames not exc 1.5 Sqm each with shutters (without taking off shutters from the frames.)

Dismantling wrought iron or mild steel work of any description not otherwise provided for

Taking up or down 15 mm bore steel tubing and connections, including cleaning for Reflixing or Removal to store

Taking down copper/aluminium point wiring (light,fan, socket or power) including fixture and fittings complete etc removing the materials for taking credit and making good the disturbed surface of wall/floor etc.

Taking down old light fittings sketch type/box type complete with glass shade & lamp all as directed by Engg-in-charge..

Taking out old/existing MCB DB SPN/TPN complete by disconnecting all as directed.

Taking down old sub main wiring with 2runs/4runs of 4/6/10 sqmm aluminium cables all as directed.

M&L for point wiring complete with 1.5 sqmm single core PVC insulated FRLS cable with multistranded copper conductors 1100 volt grade drawn through and including non metallic medium grade rigid PVC conduit accessories ( In PVC Casing & Caping ) including provision of 1.5 sqmm PVC indulated copper cable FRLS as earth continuity conductor including fabricated steel terminal box made of GI Sheet concealed in walls of suitable size for fixing switches/sockets etc all specifed for:

a)light point controlled by one way switch

b) fan point controlled by one way switch

c) 3 pin socket outlet 5Amp on independent board

All as per item no.1 above but with 4.0 sqmm copper cable for3 pin socket outlet 15Amp controlled by one way switch on independent board

Supply & Fix switch piano 5A,flush type,single pole,one way

Supply & Fix switch socket combination 5Amp,flush type

Supply & Fix switch socket combination 15Amp,flush type

Supply & Fix Fan Regulator 120 Watt 2 Module

Supply & Fix ceiling rose 65x50 mm Bakelite type,50Hz,230v

S&F MCB DB TPN 4 way complete in SS enclosure double door type.

S&F MCB DB SPN 12 way complete in SS enclosure double door type.

S&F MCB DB SPN 8 way complete in SS enclosure double door type.

S&F MCB DB SPN 4 way complete in SS enclosure double door type.

S & F of MCB TPN 415 volts 100 Amps with 10KA breaking capacity

S & F of MCB SP 230 volts 5- 32 Amps with 10KA breaking capacity

Supply and fixing LED lights fitting 1x 20 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling all as specified and as directed.

S & F LED BULK head light fitting 1X10W Enviormental friendly ultra model ,energy saving surface mounted ,decorative oval bulk head edge-lit LED Luminare compresing of high brightness LEDS diffuser,, etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size Make: C&S Electric Cat part No- LTB10WLED Or Cromption Cat Part NoLBHP-10-CDL

supply &fix submain wiring with two single core wires of 6 sqmm,pvc insulated,unsheathed stranded copper conductor cable FRLS drawn through and including PVC conduit of suitable size and accessories,ISI marked complete including Earth continuity wire with one run of 6 sqmm PVC insulated unsheathed copper cable single core complete all as specified and directed. Note: 3 runs of 6 sqmm and one run of PVC conduit shall be measured as one unit.

supply &fix submain wiring with two single core wires of 4 sqmm,pvc insulated,unsheathed stranded copper conductor cable FRLS drawn through and including PVC conduit of suitable size and accessories,ISI marked complete including Earth continuity wire with one run of 4 sqmm PVC insulated unsheathed copper cable single core complete all as specified and directed Note. 3 runs of 4 sqmm and one run of PVC conduit shall be measured as one unit.

Supply and fixing of single pole and neutral encloser with a two pin and earth plug and socket complete with one single pole MCB 240V, 20Amos

M/L for providing earthing complete with galvanised steel earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 Mtr below normal ground level ,Alternate layers of charcoal) & common salt Crystal and connected to galvanised earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts & washers of GI or steel and connecting to earth dolly all as shown in electrical plate No. 5 of SSR Part I of 1991 & testing complete including 15mm dia light grade GI pipe upto 7.5mtr long, excavation in any type of strata, PCC ( 1:3:6 ) type C1 earthing chamber, pre cast slab 50 mm thick in cement concrete ( 1: 2 : 4 ) type B 1 ( reinforced with welded steel wire fabric (XPM) weight not less than 4 Kg / Sqm with frame, test box , including 20 mm bore water pipe medium grade GI Tubing including GI Funnel , wire mesh etc. ( NOTE :- Earth continuity conductor and GI protection pipe beyond 7.5m shall be measured and paid under the respective items ).

M/L for earth continuity conductor or main earth lead GI 4.00 mm dia buried in ground / fixed on wall / drawn in 15mm dia light grade GI pipe

S & F LED post top lantern with aluminium die-cast housing cum heat sink with PMMA diffuser in IP65 protection with LTGLC30WHPLEDW Lamp

Supply & Lay cable on trench / drawn in GI Tubing XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (Heavy duty) 1100 volts grade with stranded aluminium conductor of size 25 Sqmm 3.5 core as in repairs.

Excavation in trenches not exceeding 1.5 mt wide and 1.5 mt depth for laying cables/poles etc., and getting out in soft soil all as specified and directed.any type of soil

Supply and spread clean fine dry river sand in trenches for cushioning of under ground cable Note: Only punned thickness shall be measured for payment purpose

S& F Burnt bricks sub class 'B' brick dry of size 230x115x75 mm laid across trenches for cable protection all as directed.

Returning, filling including spreading, levelling, watering, well ramming in layers including making mounds using surplus soil all as specified and as directed by Engineer-in-charge.

AMK Builders

M/S P.SWAROOP KUMAR

STANDARD AGENCIES