Development of Paid Car Parking on NH-44 Sgr Bypass at Housing Colony Bemina RHS

Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil :

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: (1 meter from cutting edge ) All kinds of soil

Providing and laying stone soling/ hand packed (above 75 mm) including all sorts of carriages by all means of transport upto site of work complete job .

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level complete job including all carriages complete job.(TMT Bars)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Form work centering / shuttering including Strutting, Propping etc and removal of form work for: (a) Foudation, footings, basis, coloums etc

12mm thick cement plaster on walls in 1:6 mix (1 Cement :6 sand )

Applying one coat of water thinnable cement primer of approved brandand manufacture on wall surface.

Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)

Structural steel work in built up sections, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete job including all carriages complete job as per direction of Engineer-in-charge: (a) (Welded.)

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes.

Providing /Fixing G.I Chain Link fencing of required width in mesh size 50x50mm including strengthing with 2mm dia wire or nuts, bolts and washers of required size including painting steel work with deluxe multi surface paint of required shade to give an even shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.80litre/10sqm of approved brand and manufacture complete job as per the directions of the Engineer in charge. a) Made of G.I wire of dia (4mm)

Painting with synthetic enamel paint of approved brand and manufactureto give an even shade. Two or more coats on new work

Manufacturing supplying and fixing retro reflective overhead signage boards made up of 2mm thick aluminum sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type-III of ASTM-D-4956-01 as approved by Engineer-in-charge; letters, borders etc. as per IRC : 67-2001 in silver white with blue colour background and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class -II of ASTM-D-4956- 01 and fixing the same to the plate of structural frame work by means of suitable sized aluminum alloys, rivets or bolts and nuts @ 300mm c/c all along the periphery as well as in two vertical rows along with theft resistant measures including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminum sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawing, specification and direction of Engineer-in-charge (Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment)

Providing & laying Black cutting / Nallah Muck / GSB filling got by lorries including Loading, unloading, ramming, dressing, and watering in layers and consolidation with P.R.R/D.R.R of 8 ton to 10 ton to required gradient, including all sorts of carriages complete job.

A) Supplying and stacking of graded stone aggregate at site of size range a)63mm to 45mm Size, including Supply and stacking of stone screening / chippings at site , b)13.2 mm(Type-A), including Supply and stacking of moorum at site Complete job. Laying water bound macadam with specified stone aggregate stone screening and binding material including , screening, sorting, spreading to template and consolidation with power road roller of 8 to 10 tonne capacity etc. complete including cost of all materials and carriages upto site of work complete job. a) Base course with 63mm to 45mm size including, stone screening 13.2mm size.

A) Supplying and stacking of graded stone aggregate at site of size range a)53mm to 22.4mm Size, including Supply and stacking of stone screening / chippings at site Supply and stacking of moorum at site Complete job. Laying water bound macadam with specified stone aggregate stone screening and binding material inculd, screening, sorting, spreading to template and consolidation with power road roller of 8 to 10 tone capacity etc. complete job including cost of all materials and carriages of all materials upto site of work complete job. a) Base course with 53mm to 22.4mm size include, stone screening 11.2mm size.

Providing and applying tack coat using hot straight run bitumen of grade – VG-10, including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications including cast of Tar complete job as per the directions of EIC. (On W.B.M. @ 0.75 Kg/sqm.)

Providing and laying bituminous macadam using crushed stone aggregates of specified grading premixed with bituminous binder, transported to site by tippers, laid over a previously prepared surface with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density, complete as per specifications and directions of Engineer-in-Charge. 50 to 100 mm average compacted thickness with bitumen of grade VG-10 @ 3.5% (percentage by weight of total mix) prepared in Drum Type Hot Mix Plant of 60-90 TPH capacity including cost of Tar complete job as per the directions of EIC.

Providing and laying semi- dense Bituminous concrete using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per specification, complete and as per directions of Engineer-in-Charge. 25 mm compacted thickness with bitumen of grade VG- 10 @ 5% (percentage by weight of total mix) and lime filler @ 2% (percentage by weight of Aggregate) prepared in Drum Type Hot Mix Plant of 60-90 TPH capacity including cost of Tar complete job as per the directions of EIC.

Providing and laying seal coat of premixed fine aggregate (passing 2.36 mm and retained on 180 micron sieve) with bitumen using 128 kg of bitumen of grade VG-10 bitumen per cum of fine aggregate and 0.60 cum of fine aggregate per 100 sqm of road surface including rolling and finishing with road including cost of Tar complete job as per the directions of EIC.

Disposal of excavated earth up to a lead of 1 km including loading unloading, and all carriages upto site complete job as per the directions of EIC

Carriage of materials by mechanical transport from source upto the site of work complete job . A) Stone agg 40mm from Athwajan 15 kms av .lead

b) Stone agg 20mm from Athwajan 15 kms av .lead

Sand from Ganderbal 23 Km av lead