Minor civil works of FPC Cordination Center

Amount

CIVIL 1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level

(A) 112 mm thick brick wall

In Prop. 1:4

15 mm thick cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80 mm girth complete as directed

A) On rough side

B) On fair side

Providing and laying plain/reinforced cement concrete works cement, coarse sand & 20mm downgraded stone aggregate including dewatering if necessary and curing complete

(B) In super structure from plinth level up to 1st floor level

i) Columns, Pillars, Posts, Struts, Suspended floor, Roof, Landing, Shelf and Support

In prop. 1:2:4

Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4m and removal of the same

3.1.1.3 Columns, pillars, posts & struts

(b) Using 25mm thick

Side and soffits of beams, beam haunching, cantilever

Using 25mm thick

Flat surfaces such as soffits of suspended floors, roofs, landing

Using 25mm thick

Supplying fitting and fixing in position reinforcement bars conforming to relevant IS code for RCC work/RB walling including straightening, cleaning, cutting and bending to proper shape and length as per details

a) From primary producer

(i) TMT corrosion resistant steel

Providing wood work in frame of doors, windows, clerestory windows and other similar works wrought, framed and fixed in position in contact with CC or brick masonry wall as directed and specified

(b) With 1st class timber

Providing and fixing flush door shutters solid core construction with frame of 1st class hard wood with cross band and face veneered ply wood face panels conforming to relevant IS code

Non decorative type

(ii) 35 mm thick

Providing, fitting and fixing fully glazed clerestory window and fan light including fitting and fixing 2 MS pivot hinges

c) With 1st class local wood

ii) 35mm thick

Supplying, fitting and fixing anodized aluminum fittings of approved make, reasonably smooth, free from sharp edges and corners flaws and other defects and with counters

a) Sliding door bolts

i) 250 mm x 16 mm

b) Tower bolts

ii) 250 mm x 12 mm

c) Door handle

iii) 100 mm

Providing and fixing clear sheet glass bedded in putty and fixed with/without wooden bidding including necessary cutting and glass to be required size

(2) Area of glass panes exceeding 0.15 m2 but not exceeding 0.52 m2

4.00 mm thick

Supplying, fitting and fixing anodized aluminium decorated grill with anodized aluminium rectangular frame of F and H section fitted with wall columns of stiffeners by special type of screw as per specification by the department for all levels

Providing, fitting and fixing anodized aluminium sliding windows and ventilators of standard section of approved brand as required complete as specified and directed for all levels

(a) 2 track sliding windows

(i) 6 mm clear glass

Providing, fitting and fixing anodized aluminium framed glazed doors partition walls partly glass and partly prelaminated board with anodized aluminium frame made of 100x43x2 mm section of approved brand complete as directed by the department of all levels

(i) 6mm thick glass and 12mm prelaminated board

Supplying, fitting, fixing and painting where necessary M/F suspended ceiling which includes GI perimeter channels of size 0.55mm thick along with perimeter of ceiling, screws, fixed to brick wall/partition with the help of nylon sleeves and screws at 610mm c/c

(i) 9.5 mm thick

Providing VITRIFIED floors tiles of approved quality of specified size, shape and thickness not less than 18mm on floors, skirting, risers and treads of steps over 15mm thick base of cement mortar in prop. 1:3 including cutting where necessary finished

(a) Normal range

600mm x 600mm

Providing two coats of J K wall putty cement based putty after removing all loosely adhering material from the wall surface with the help of emery stone as specified

Wall painting with acrylic emulsion paint approved brand and manufacture on new surface to give an even shade after thoroughly brushing the surface free from mortar droppings

(a) Acrylic emulsion paint approved brand

Finishing old/ new wall with water proofing weather coat smooth anti-fungal exterior painting of approved make of Berger paint of required shade after cleaning as directed at all levels

Applying priming coat over new wood and wood based surface over 100mm in girth/width after and including preparing the surface by thoroughly cleaning oil, grease, dirt.

(a) With ready mixed paint

Painting two coats on new wood and wood based surface with enamel paint of approved brand and manufacture to give an even shade including the surface

(i) Surface over 100mm in width or girth

(b) High Gloss

Extra over item nos. 2.2.1 (i) (B) above for each subsequent floor or part thereof above the 1st floors levels

Extra for brick for each subsequent floor or part thereof above the 1st floor level

a) 112 mm thick

Extra for each subsequent floor or part thereof above the 1st floor level as mentioned in item no. 3.1.1 & 3.1.1..3 (b)

Extra over item 18.1.1 (a,b,c) for each subsequent floor or part thereof above first floor

ELECTRICAL Wiring for light/ fan/ call bell point with 2x1.5 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable HFFR/ZHFR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system with 2 mm thick 20mm dia rigid low halogen SFT PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) complete

Medium point up to 6.00 metre. Length.

Long point up to 10.00 metre. Length.

Wiring for circuit wiring with P.V.C. insulated single core unsheathed industrial (Multistrand) cable HFFR/ZHFR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel or Equivalent Make as approved by the Deptt.) Cable in surface/ recessed PVC 2 mm thick rigid low halogen SFT PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) Wiring system.

(a) With 2 x 1.5 sq. mm. Cable in 20 mm dia. rigid low halogen SFT PVC IS: 9537 Part - III conduit.

b) With 2 x 4 sq. mm. + earth continuity with 1x2.5 sq. mm. in 20 mm. dia. rigid low halogen SFT PVC IS: 9537 Part - III conduit

c) With 2 x 6 sq. mm. + earth continuity with 1x 4 sq. mm. in 25 mm. dia. rigid low halogen SFT PVC IS: 9537 Part - III conduit

With 2 x 10 sq. mm. + earth continuity with 1x 6 sq. mm. cable in 25 mm. dia. rigid low halogen SFT PVC IS: 9537 Part - III conduit.

With 3 x 2.5 sq. mm. + earth continuity with 2x1.5 sq. mm. cable in 25 mm. dia. rigid low halogen SFT PVC IS: 9537 Part - III conduit

Supplying with fitting and fixing of 6 amp one way modular clip in bell push MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE (MURANO) including making necessary connection as per direction of department.

Supplying including installation of socket outlet 10/16 Amps 3/5 pin combine shuttered complete , MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department.

Supplying including installation of socket outlet 6/10/13 Amps INTERNATIONAL SOCKET , MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department.

Supplying including installation of socket outlet 10 Amps 3 pin combine shuttered complete, MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), and CRABTREE (MURANO) including making necessary connection as per direction of department.

Supplying with fitting and fixing of 16 amp one way modular clip in switch, MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE (MURANO) including making necessary connection as per direction of department.

Supplying with fitting and fixing of 6/10 amp one way modular clip in switch, MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department.

Supplying with fitting and fixing of 6/10 amp two way modular clip in switch , MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department.

Supplying including and fixing of following Metal boxes for MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE in surface/ recessed system complete as per direction of department.

4-5 module type Metal

6-8 module type Metal

Supplying including fitting and fixing of following front plate of suitable colour MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE as per direction of department.

4 module

5 module

6 module

8 module

Supplying including fitting and fixing of TV co-axial outlet MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE including making necessary connection as per direction of department.

Supplying with fitting and fixing of RJ-11 Telephone jack MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE including making necessary connection as per direction of department.

Supplying and fixing of batten holder (Anchor Penta PC CHERRY /Gold medal /Kolor kany.kom/Havells or equivalent make as approved by the Deptt.) including connection as approved by the Deptt. as required ( without Lamp)

Supplying and fitting of 18/20 Watt CFL lamp in the existing batten holder/angle holder/decorative bracket/bulk head fitting/ pendent holder etc. as specified and directed by the Deptt.

Supplying with fitting and fixing sheet steel, phosphatized, powder painted dust & vermin proof Double door (IP-43) surface mounting SPN MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc. fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the Deptt.

8 way SPN double door

Supplying with fitting and fixing sheet steel, phosphatized, powder painted Single door surface mounting vertical TPN MCB DB incorporated with bas-bar, Neutral link, Earth bar 125A and din rail etc. fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the Deptt.

4 way TPN (8+12) single door

Supplying with fitting and fixing single Pole 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the Deptt.

Supplying with fitting and fixing DP 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the Deptt.

Supplying with fitting and fixing TPN 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the Deptt.

Supplying & laying of 25x4 mm size Copper strips drawn on surface from earth electrode to Electrical switch gears, machineries etc. complete with supply of Brass nuts & bolts, screws etc including riveting, soldering & making necessary connection as approved, specified and directed by the Deptt.

Supply with installation & commissioning of readymade maintenance free CPRI approved chemical earthing system with 50 mm dia. 3.00 Meters length corrosion free Single pipe technology- Copper CHEMRODE ELECTRODE complete with RESLOW Grounding Minerals 25 K and Advance Earth Pit cover PV including excavation of earth pit and construction of brick earth chamber including plastering both inner & outer surface of brick wall as specified and directed by the Deptt.

Supplying including fitting and fixing of following A.C. Wall fan complete with all accessories like down rod, canopy etc. of following sweeps with making necessary connection as approved by the Deptt. as required complete and as directed by the Department [ without regulator].

Tornado wall with metal blade 450 mm sweep

Supplying, installation, testing and commissioning of the following indoor CFL/Fluorescent luminaries complete with all accessories such as ballast, starter etc. directly on wall / ceiling including connection cable, as approved by the Deptt. With 1.5 sq. mm P.V.C. insulated S.C.copper conductor as required and as directed by the department.

Supplying and fixing of 250/305 mm dia (Nominal size) flush type circular ceiling fittings complete with holder, Aluminum anodized back plate and brass holder, 20 Watt CFL lamp including connection as approved by the Deptt. as required.

Supplying with installation testing and commissioning of Hi -- wall 4 STAR rating non ducted split type air conditioner of the following capacity with cordless remote complete with indoor and outdoor unit, copper pipe and electrical connection as approved by the Deptt.) up to 5 m between the room unit and outdoor unit as directed by the department.

1.5 Ton capacity

(Carrier make) Dura cool star

Supplying with fitting and fixing Voltage stabilizer of the following specification complete including making necessary connection as approved, specified and directed by the Deptt. (SKYLAND / Vee-Dee / V GUARD / VERTEX/ INDO/ VENUS make)

4.0 KVA Automatic Input 90-280 V Output 200-240 V