GE/H-64/2024-25 REPAIR/ REPLACEMENT OF FACADE LIGHTS AND ALLIED WORKS AT AHRR UNDER GE E/M RR HOSPITAL DELHI CANTT 10

Amount

Supply & Fixing in replacement of exterior rated Architectural LED projector light fixture 24W, LED, RGBW (DMX512 Compatible), IP 66 with snot/visior. The housing should be made of high strength pressure die cast aluminium with 3-4mm thick safety glass and coated by static powder making it weather resistant. Protection screen with tempered glass with high impact resistance IK07. Voltage input AC240V, 50Hz. The luminaire should have options for various beam angle: 10°/25°/40°/60°. Light fixture should be standard DMX512 protocol compatible, the DMX decoder function should be inbuilt the light fixture. Estimated LED Lifetime is L70-100,000 hours minimum@ 25degree Ambient Temperature and LEDs of CREE / OSRAM / NICHIA to be used. Minimum Light fixture Lumen output atleast 1080 Lumens @ full power. Operating Temperature : - 20°C to +50°C. Housing to have adjustable base bracket for angle adjustment so that the light direction can be adjusted to illuminate desired structural elements including weather proof connection cables, water proof connectors complete all as specified and directed by Engr-in-Charge. MAKE:- PHILIPS/ ORIENT/ HAVELLS/ BAJAJ Note: This item shall be provided of the make PHILIPS/ ORIENT/ HAVELLS/ BAJAJ. Any other make specified in particular specifications & Appendix 'B' to particular specifications are not applicable for this item.

Supply & Fixing in replacement of exterior rated Architectural LED projector light fixture 30W, LED, RGBW (DMX512 Compatible), IP 66. The housing should be made of high strength pressure die cast aluminium with 3-4mm thick safety glass and coated by static powder making it weather resistant. Protection screen with tempered glass with high impact resistance IK07. Voltage input AC240V, 50Hz. The luminaire should have options for various beam angle: 10°/25°/40°/60°. Light fixture should be standard DMX512 protocol compatible, the DMX decoder function should be inbuilt the light fixture. Estimated LED Lifetime is L70-100,000 hours minimum@ 25degree Ambient Temperature and LEDs of CREE / OSRAM / NICHIA to be used. Minimum Light fixture Lumen output atleast 1350 Lumens @ full power. Operating Temperature : - 20°C to +50°C. Housing to have adjustable base bracket for angle adjustment so that the light direction can be adjusted to illuminate desired structural elements etc. as required complete all as specified and directed by Engr-in-Charge. MAKE:- PHILIPS/ ORIENT/ HAVELLS/ BAJAJ Note: This item shall be provided of the make PHILIPS/ ORIENT/ HAVELLS/ BAJAJ. Any other make specified in particular specifications & Appendix 'B' to particular specifications are not applicable for this item.

Supply and fixing in replacement of exterior rated Architectural ED projector light fixture 36W, LED, RGBW (DMX512 Compatible), IP 66. The housing should be made of high strength pressure die cast aluminium with 3-4mm thick safety glass and coated by static powder making it weather resistant. Protection screen with tempered glass with high impact resistance IK07. Voltage input AC240V, 50Hz. The luminaire should have options for various beam angle: 10°/25°/40°/60°. Light fixture should be standard DMX512 protocol compatible, the DMX decoder function should be inbuilt the light fixture. Estimated LED Lifetime is L70-100,000 hours minimum@ 25degree Ambient Temperature and LEDs of CREE / OSRAM / NICHIA to be used. Minimum Light fixture Lumen output atleast 1620 Lumens @ full power. Operating Temperature : - 20°C to +50°C. Housing to have adjustable base bracket for angle adjustment so that the light direction can be adjusted to illuminate desired structural elements complete all as specified and directed by Engr-in-Charge. MAKE:- PHILIPS/ ORIENT/ HAVELLS/ BAJAJ Note: This item shall be provided of the make PHILIPS/ ORIENT/ HAVELLS/ BAJAJ. Any other make specified in particular specifications & Appendix 'B' to particular specifications are not applicable for this item.

Supply & Fixing in replacement of 1M signal cable with IP67 connectors at one end complete all as specified and directed by Engr-in-Charge.

Supply & Fixing in replacement of 1M signal cable with IP67 connectors at both end complete all as specified and directed by Engr-in-Charge.

Supply & Fixing in replacement of 3M signal cable with IP67 connectors at both end complete all as specified and directed by Engr-in-Charge.

Supply & Fixing in replacement of CS JUNCTION BOX 3 WAY complete all as specified and directed by Engr-in-Charge.

Supply & Fixing in replacement of DMX Special cable (single pair) having one 22AWG pair stranded (7x30) tinned copper conductors, Datalene (FHDPE) insulation, twisted pairs, overall Beldfoil shield (100% coverage) plus tinned copper braid, PVC jacket Cable complete all as specified and directed by Engr-in-Charge.

Supply & Fixing in replacement of exterior rated LED linear flexible strip made of Silicon with RGB/RGBW LEDs, 15Watts per mtr, 24V, 60LEDs per mtr programmable with inbuilt decoder, CRI > 80(for white), min 675 lumens per mtr. The entire led should be IP67 protected with sealed ends customized as per the various site points as approved by engineer in charge. The product should be BIS approved with R number mentioned on product label. To be supported with Product test reports - LM79, BIS Report and LEDs Test Reports. Luminaire shall be conforming to BIS i.e. IS 10322 (PART 5/SEC 7) and shall be complete with all necessary mounting accessories required for proper functioning, weather proof connection cables, water proof connectors etc. as required complete all as specified and directed by Engr-in-Charge. MAKE:- PHILIPS/ ORIENT/ HAVELLS/ BAJAJ Note: This item shall be provided of the make PHILIPS/ ORIENT/ HAVELLS/ BAJAJ. Any other make specified in particular specifications & Appendix 'B' to particular specifications are not applicable for this item.

Supply & Fixing in replacement of exterior rated LED linear flexible strip made of Silicon with RGB/RGBW LEDs, 14.4 Watts per mtr, 24V, 60LEDs per mtr programmable with inbuilt decoder, CRI > 80(for white), min 675 lumens per mtr. The entire led should be IP67 protected with sealed ends customized as per the various site points as approved by engineer in charge. The product should be BIS approved with R number mentioned on product label. To be supported with Product test reports - LM79, BIS Report and LEDs Test Reports. Luminaire shall be conforming to BIS i.e. IS 10322 (PART 5/SEC 7) and shall be complete with all necessary mounting accessories required for proper functioning, weather proof connection cables, water proof connectors etc. as required complete all as specified and directed by Engr-in-Charge. MAKE:- PHILIPS/ ORIENT/ HAVELLS/ BAJAJ Note: This item shall be provided of the make PHILIPS/ ORIENT/ HAVELLS/ BAJAJ. Any other make specified in particular specifications & Appendix 'B' to particular specifications are not applicable for this item.

Supply & Fixing in replacement of DMX DECODER_RGBW_12V/24V_480W complete all as specified and directed by Engr-in-Charge.

Supply & Fixing in replacement of Instruction Forwarder Ranger/Compass(AC) / Strip complete all as specified and directed by Engr-in-Charge.

Supply & Fixing in replacement of 1 Mtr wire 5pin IP67 Female Connector RGBW complete all as specified and directed by Engr-in-Charge.

Supply & Fixing in replacement of 1M EXTENSION WIRE 5PIN IP67 RGBW complete all as specified and directed by Engr-in-Charge.

Supply & Fixing in replacement of CS JUNCTION BOX 3 WAY complete all as specified and directed by Engr-in-Charge.

Supply & Fixing in replacement of LED DRIVER IP67, 24V output, Power consumption - 240 W complete all as specified and directed by Engr-in-Charge.

Supply & Fixing in replacement of Aluminium Channel complete all as specified and directed by Engr-in-Charge.

Supply & Fixing in replacement of DMX Controller for the system including all other accessories required for the running of the system Controller should have Input Power 5-5.5V DC 0.6A and Output Protocol DMX512 with 4 universe complete all as specified and directed by Engr-in-Charge. MAKE:- PHILIPS/ ORIENT/ HAVELLS/ BAJAJ Note: This item shall be provided of the make PHILIPS/ ORIENT/ HAVELLS/ BAJAJ. Any other make specified in particular specifications & Appendix 'B' to particular specifications are not applicable for this item.

Supply & Fixing in replacement of Address writer complete all as specified and directed by Engr-in-Charge.

Supply & Fixing in replacement of Instruction Forwarder Ranger/Compass(AC) complete all as specified and directed by Engr-in-Charge.

Supply & Fixing in replacement of Signal Amplifier L11 For Max. 30 Light complete all as specified and directed by Engr-in-Charge.

Supply & Fixing in replacement of Signal Booster / Splitter with 6-Way output for spreading and amplyfing the DMX Data signals in multiple directions, Input-220-240V AC, complete all as specified and directed by Engr-in-Charge. MAKE:- PHILIPS/ ORIENT/ HAVELLS/ BAJAJ Note: This item shall be provided of the make PHILIPS/ ORIENT/ HAVELLS/ BAJAJ. Any other make specified in particular specifications & Appendix 'B' to particular specifications are not applicable for this item.

M & L for Charges for DMX Programing, Commissioning, Troubleshooting and synchronization of DMX control system. The addressing of fixtures with the multiple scenes (atleast 20Themes) and Testing for the complete system all as specified and directed by Engr-in-Charge. Note : (a) Complete work i.e supply, installation, testing & commissioning should be carried out through OEM. (b) Contractor should submit the design in 2D drawing and in also digital design prior to order the material. (c) Warranty and repair / replacement of the Façade lights will be minimum 3 years from the date of completion. (d) Warranty certificated will be provided through concerned OEM before claiming completion. (e) LED Lights and Controller shall be of same make.

Ruchi enterprises (BID ID -3224967)

SANJEEV ENTERPRISES (BID ID -3224867)

OMVIN ENTERPRISES LLP (BID ID -3218690)

M P TYAGI ENGINEERS AND CONTRACTORS (BID ID -3218216)

M/s R P Enterprises (BID ID -3219643)

ACR ENTERPRISES (BID ID -3225208)