WELCOME MAINTENANCE OF CERTAIN OFFRS ACCN UNDER AGE B/R-III OF GE (SOUTH) MEERUT CANTT

Amount

Taking down Chowkats or frames exc 1.5 sq. m but n exc 4 sq m each with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down Shutters of any description exc 1 sq. m and n exc 2 sq. m each and removing to store complete all as specified and directed.

S&F 2nd class hardwood Plain, solid, straight, chowkats & frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints. Complete all as specified and directed.

M&L Precast cement concrete type B1 (1:2:4) using 20 mm graded aggregate in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings, kneelers, apex stones, pier caps, columns, hold fast, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling), corbels, brackets, etc.(of any section indicated), with plain fair faces, including chamfers, weathering’s, throttling etc. and setting in CM(1:4) with joints to match. Complete all as specified and directed.

S&F MS hold fast similar small articles confirming to Fe 290 Gde -E- 165. Complete all as specified and directed.

S&F 40mm thick flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides. Complete all as specified and directed.

S&F 2nd class hardwood 35mm thick Glazed & skeleton shutters, open rebated & prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut & mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); to chowkats complete all as specified and directed.

S&F aluminium wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with alu.wire staples. Complete all as specified and directed.

S&F Aluminium, anodised, barrel tower bolts 200mm long of extruded section. Complete all as specified and directed.

S&F Aluminium alloy, anodised, sliding door bolt 300mm long with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded sections or cast aluminium alloy. Complete all as specified and directed.

S&F Aluminium handles 150mm size, cast type, anodised complete all as specified and directed.

S&F in repair overall length of cover plate 150mm long Floor door stopper of aluminium alloy body & tongue, anodised, with hard drawn steel spring fixed in floor. Complete all as specified and directed.

S&F 100mm butt hinges, medium weight cold rold mild steel. Complete all as specified and directed.

Taking down chowkats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames) complete all as specified and directed.

S&F 2nd class hardwood 30mm thick Glazed & skeleton shutters, open rebated & prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut & mitred beds for securing glass, etc.; sizes of members of windows, ventilators, etc. are provided with stiles & rails as specified in SSR Part I, Section 8 clause 8.20 (b); to chowkats complete all as specified and directed.

S&F 50 mm butt hinges, medium weight cold rold mild steel. Complete all as specified and directed.

S&F Aluminium handles 75mm size, cast type, anodised complete all as specified and directed.

S&F Aluminium, anodised, barrel tower bolts 75mm long of extruded section. Complete all as specified and directed.

M&L applying two coats of synthetic enamel paint on wooden surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of pink primer complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for

S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks & similar work conforming to Fe 290-0 Gde E-165 complete all as specified and directed.

M&L applying two coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of red oxide, zinc chrome complete all as specified and directed.

Taking up or down 15mm bore of pipe steel tubing and connections, including cleaning for re-fixing or removal to store and S & F 15 mm dia GI tubing medium grade with all fittings and fixed to walls or laid in floors complete all as specified and directed.

Cutting chases, pinning in, making good to facings where required and pointing in CM(1:3) to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth in brick wall complete all as specified and directed.

Taking up or down 20mm bore of pipe steel tubing and connections, including cleaning for re-fixing or removal to store and S & F 20 mm dia GI tubing medium grade with all fittings and fixed to walls or laid in floors complete all as specified and directed.

S & F in repair Gun-metal, globe or gate valves ISI marked, 20mm bore, with iron wheel head, screwed both end for iron pipe complete all as specified and directed.

S&F in repairs CP Bib taps 15 mm bore, cast copper alloy with crtuch or butterfly handle,screwed down, screwed for iron pipe or for brass ferrule fancy type complete all as specified and directed.

S&F in repairs CP Pillar taps fancy type 15 mm bore, cast copper alloy, with capstan heads screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks & fly-nuts, screwed for iron pipe complete all as specified and directed.

S&F in repair Stop valves 15 mm bore fancy type, CP with long shank & cup (conncelaed type), cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S & F in repairs 15 mm dia bore cast copper alloy chromium plated fancy type angle cock with long shank & cup (concealed type), complete all as specified and directed.

S&F in repairs flexible jet shower, 25mm dia including CP flexible pipe 1.20m long heavy duty and hook incl all necessary fittings complete all as specified and directed.

S&F in repair two -in- one tap cast copper alloy chromium plated fancy type, CP with long shank & cup (conncelaed type), cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repar Brass CP wall mixer 3 in 1 for mixing hot & cold water screwed down for iron pipe. Complete all as specified and directed.

S & F in repair wash hand basin brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed. complete all as specified and directed.

S&F in repair toilet paper holder, brass chromium plated, fixed to walls with chromium plated brass screws. Complete all as specified and as directed.

S&F in repair soap dish, chromium plated, fixed to plugs with chromium plated brass screws. Complete all as specfied and as directed.

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers & waste; including bedding in CM to dwarf wall or including fixing cantilever brackets & connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repairs Vitreous China wash basin, white/coloured, flat back, size 550x400mm excluding taps, waste chain & plug & porcelain stopper but including brackets complete all as specified and directed.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern & flush pipe) complete all as specified and directed.

S&F in repairs Vitreous China squatting pan, `Orrisa' pattern, size 580 x440 mm white, with integral foot rests (excluding flushing cistern & flush pipe) complete all as specified and directed.

S&F in repairs PVC valveless, syphonic action type, flushing cistern 10 litr capacity, low level, white, with intel, ball valve, float & handle including brackets complete all as specified and directed.

S&F in repair PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed.

S&F in repairs 125mm size brass chromium plated shower rose with or without swivel joints any size including fixing to steel pipe or union complete all as specified and directed.

S&F in repair Cast iron floor trap 75mm dia, with CP grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed.

S&F in repair Cast iron Nahani trap 100mm dia, with CP grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed.

M&L for vetrified ceramic tiles light shade 10mm thick (square/rectangular) polished area of each tiles nexc 0.36 sqm in floors set and joined in neat cement slurry and pointed in white or .coloured cement to match and incl 15mm thick CM 1:6 screed bed or bedding layer of mortar for laying floor finishes incl dismantling of old unserviceable floor tiles. Complete all as specified and directed.

M&L for vetrified ceramic tiles light shade 10mm thick (square/rectangular) polished area of each tiles nexc 0.36 sqm in skirting/dado set and joined in neat cement slurry and pointed in white or .coloured cement to match and incl 10mm thick CM 1:4 screed bed for skirting/dados incl dismantling of old unserviceable wall tiles. Complete all as specified and directed.

SS&F Coloured Non Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over & including 15mm thick screed in CM(1:6) incl dismantling of old unserviceable tiles. Complete all as specified and directed.

S&F Coloured Glazed ceramic tiles in vertical surfaces 350x250mmx7mm/450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over & including 10mm thick plaster in CM(1:4) on fair face of brick or concrete surface incl dismanting of old unserviceable tiles. Complete all as specified and directed.

S & F in repairs 15 mm dia bore cast copper alloy chromium plated fancy type angle cock with long shank & cup (concealed type), complete all as specified and directed.

S & F in repair drapery rod powder coated 20 mm internal dia with bracket incl decorative brass end knob etc and fixed on wall. Complete all as specified and directed

S&F in repairs 40mm bore unplasticised PVC pipe of pressure rating 10 kg/Sqcm fixed complete to walls, ceiling or laid in floors complete all as specified and directed.

S&F in repairs 32mm bore unplasticised PVC pipe of pressure rating 10 kg/Sqcm fixed complete to walls, ceiling or laid in floors complete all as specified and directed.

S & F in repairs stainless steel kitchen plate rack of thickness nexc 1 mm thick (18 gauge) and size nexc 1.00sqm. complete all as specified and directed.

S&F in repairs aluminium wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.4mm and fixed with alu.wire staples. Complete all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. Complete all as specified and directed.

M & L for rendering 15 mm thick on fair faces of brick Work or concrete curface and finished fair & even in CM 1:6 complete all as specified and as directed.

M & L for rendering 5 mm thick in CM 1:3 on concrete surfaces as on ceiling complete all as specified and as directed

M & L for preparation of newly plastered surfaces or previously untreated surfaces of ceiling and applying three coats of white wash on ceiling, complete all as specified and directed.

M & L for preparation of new distempered surfaces of walls and applying two finishing coat of oil bound distemper (oil emulsion) on walls, incl 3mm thick wall care putty. complete all as specified and directed.

Dismantling of Stone slabs & tiles of any description or thickness in floors, aprons etc. Laid, bedded & pointed in any mortar complete all as specified and directed.

M&L 18-20mm thick Granite (of any tpe) work (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platforms and like in CM(1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15 mm thick Screed in CM (1:6) complete all as specified and directed.

M&L machine cut kota stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab (of any tpe) work (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platforms including rubbing and polishing complete over 15 mm thick screed bed in CM (1:6) complete all as specified and directed.

S&F repair 20mm dia CP towel rail 600mm long incl all fittings complete all as specified and as directed.

S&F Sheet glass 3.0mm thick, ordinary quality & glazing with oil putty/wooden beadding in square n exc 0.5 sq.m in each pane including hacking out old broken glass (any thicknesss, size,quality or description) from wooden frame inlcuding punching or drilling out old glazing pins/spring clips & providing & fixing new ones complete all as specified and directed.

S&F Sheet glass 3.0mm thick, frosted glass & glazing with oil putty/wooden beadding in square n exc 0.5 sq.m in each pane complete all as specified and directed.

S&F Sheet glass 3.0mm thick, frosted glass & glazing with oil putty/wooden beadding in square n exc 0.5 sq.m in each pane including hacking out old broken glass (any thicknesss, size,quality or description) from metal/wooden frame inlcuding punching or drilling out old glazing pins/spring clips & providing & fixing new ones complete all as specified and directed.

Dismantling boarding any description fixed in any position with nails and M&L 18/19 mm thick Prelaminated particle board, interior grade, prelaminated both side deocrative choice lamination fixed with screws to timber frame work as in kitchen cabinet, almirah & shelves incl butt hinges, hasp & staple alumninim handles, alu tower bolt, knob as per site requirement and complete all as specified and directed.

S&F in repair auto hinges for cabinet case complete all as specified and directed.

S&F in repair stainless steel plain basket of size 17"x20"x6". Complete all as specified and directed.

S&F in repair stainless steel partion of size 17"x20"x6". Complete all as specified and directed.

S&F in repair stainless steel cutlery of size 17"x20"x6". Complete all as specified and directed.

S&F in repair stainless steel grain trolly with stand of size 21"x17"x10". Complete all as specified and directed.

S&F in repair stainless steel plate basket of size 17"x20"x6". Complete all as specified and directed.

S&F in repair 20" long telescopic sider to facilitate drawer slide on steel ball bearing fixed with steel screws. Complete all as specified and directed.

S&F in repair 150mm size stainless steel bright finish handle for cabinet shutter. Complete all as specified and directed.

Taking down PVC/CI pipes any type and size incl all fittings. Complete all as specified and directed.

S&F in repair PVC (SWR) pipes 75mm bore double socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F in repair PVC (SWR) pipes 110mm bore double socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F in repair PVC (SWR) bends any radius 75mm dia complete all as specified and directed.

S&F in repair PVC (SWR) bends any radius 110mm dia complete all as specified and directed.

S&F in repair PVC (SWR) branch piece, single (single Y) equal or unequal 75mm dia complete all as specified and directed.

S&F in repair PVC (SWR) branch piece, single (single Y) equal or unequal 110mm dia complete all as specified and directed.

S&F in repair Stack clamps out of 25mm by 5mm flat iron & 16mm dia round iron stays. Including bolts & nuts & securing ends of stays to wall or roof for 75 mm bore pipe complete all as specified and directed.

S&F in repair Stack clamps out of 25mm by 5mm flat iron & 16mm dia round iron stays. Including bolts & nuts & securing ends of stays to wall or roof for 100 mm bore pipe complete all as specified and directed.

Disconnecting existing tanks, not exc 500 litres capacity, setting aside (or lowering if required) for repairs, cleaning, etc. & hositing if required reconnecting & re-fixing in position and incl Cleaning and removing all scale and dirt etc: from the tanks and from mouth of circulating pipes etc complete and finally washing the tanks with clean water and bringing the tank to a position for storing clean water and bringing the tank to a position for storing the clean water. Complete all as specified and as directed .all as specified and directed. Note: (i) The tank is to be cleaned through Alum and bleaching powder solution. (ii) The wire brush is to be used for cleaning of water tank.

Disconnecting existing tanks, not exc1000 litres capacity, setting aside (or lowering if required) for repairs, cleaning, etc. & hositing if required reconnecting & re-fixing in position and incl Cleaning and removing all scale and dirt etc: from the tanks and from mouth of circulating pipes etc complete and finally washing the tanks with clean water and bringing the tank to a position for storing clean water. Complete all as specified and as directed. Note: (i) The tank is to be cleaned through Alum and bleaching powder solution. (ii) The wire brush is to be used for cleaning of water tank.

Dismantling of old water tank of capacity exceeding 250 ltr but not exceeding 500 ltr and S&F 500 litres rotational mouded polyethylene three layer water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I incl 20mm bore ball brass valves, high pressure with polythene float and flynut complete screwed for iron pipe/PPR pipe or brass ferrule and fixed.Complete all as specified and directed.

Dismantling of old water tank of capacity exceeding 500 ltr but not exceeding 1000 ltr and removing to store capacity 1000 litres and S&F 1000 litres rotational mouded polyethylene three layer water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I incl 20mm bore ball brass valves, high pressure with polythene float and flynut complete screwed for iron pipe/PPR pipe or brass ferrule and fixed.Complete all as specified and directed.

S & F in repair PVC covers of PVC/ HDPE water tank suitable for 500 & 1000 ltrs capacity including all necessary locking arrangement complete all as specified and directed.

Demolition of brick work or stone boulder masonry, built in cement mortar, including all quoins, arches, pillars etc but excluding ashlar, facings, dressed stone work and precast concrete incl M&L brick work with sub-class 'B' bricks, straight or curved on plan exc 6m mean raidus built in CM 1:6. Complete all as specified and directed.

Supply & fix in repair glass self assembly made of 5 to 6 mm thick sheet glass of size 600 x 120mm fixed with CP brackets complete all as specified and directed.

Supply & fix in repair glass corner shelf assembly fancy type made of 6 to 7 mm thick sheet glass of size 250x 250mm fixed with CP brackets complete all as specified and directed.

S&F in repair CP grating 75mm dia. Complete all as specified and directed.

S&F in repair CP grating 100mm dia. Complete all as specified and directed.

S & F in repair Ball valves 20mm bore high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe & fixed. complete all as specified and directed.

M & L for preparation of old plastered surfaces of ceiling and applying applying 2mm thick wall care putty and two coat finishing of oil bound disteper. complete all as specified and directed.

M & L for preparation of old plastered surfaces on wall applying 2mm thick wall care putty and two coat finishing of oil bound distemper complete all as specified and directed.

M&L for preparation of old painted surfaces of wood and wood based material of any decription over 10cm in width or girth and applying one coat of synthetic enamel paint. Complete all as specified and directed.

M&L for preparation of old painted surfaces of steel and steel based material of any decription over 10cm in width or girth and applying one coat of synthetic enamel paint. Complete all as specified and directed.

Taking down carefully any type of battens or conduit point wiring with conduit (light, fan, socket or power) complete including fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, pendent light fittings, MCBs / isolators, fan regulators etc removing material from site complete all as specified and directed.

All as per item No 102.00 here -in- before but except conduit.

Material and labour for point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, stranded, FRLS PVC insulated, unsheathed, copper conductor cable in existing PVC / MS concealed conduit of any size/dia complete with all accessories / fittings, brass screws, washer etc, sunk zinc coated pressed steel terminal boxes with 3mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated stranded copper conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed for One light point / Bell point controlled by one, one way switch 05 / 06 Amps complete all as specified and directed.

All as per item No 104.00 here -in- before but for One ceiling / Exhaust fan point controlled by one, one way switch 05 / 06 Amps complete all as specified and directed.

All as per item No 104.00 here -in- before but for One 3 pin, 05 / 06 Amps socket outlet point on independent board controlled by one, one way 05 / 06 Amps switch complete all as specified and directed.

All as per item No 104.00 here -in- before but for One 3 pin, 05 / 06 Amps socket outlet point on same board controlled by one, one way 05 / 06 Amps switch complete all as specified and directed.

All as per item No 104.00 here -in- before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 15/16 Amps socket outlet point on independent board complete all as specified and directed.

Material & labour for point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi stranded, FRLS PVC insulated, unsheathed copper conductor cable in and including PVC concealed conduit of 20 mm dia or higher, medium grade complete with and including all PVC conduit accessories / fittings, brass screws, washers etc, sunk zinc coated pressed steel terminal boxes including all cutting holes in or through walls, making good to walls, ceiling etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing with 3mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated stranded copper conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed for One light point / bell point controlled by one, one way switch 05 / 06 Amps complete all as specified and directed.

All as per item No 109.00 here -in- before but for One ceiling / Exhaust fan point controlled by one, one way switch 05 / 06 Amps complete all as specified and directed.

All as per item No 109.00 here -in- before but for One 3 pin, 05 / 06 Amps socket outlet point on independent board controlled by one, one way 05 / 06 Amps switch complete all as specified and directed.

All as per item No 109.00 here -in- before but for One 3 pin, 05 / 06 Amps socket outlet point on same board controlled by one, one way 05 / 06 Amps switch complete all as specified and directed.

All as per item No 109.00 here -in- before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 15 / 16 Amps socket outlet point on independent board complete all as specified and directed.

Supply & fixing switch piano flush type, 05 / 06 Amps single pole, one way 240 volts complete all as specified and directed.

Supply & fixing socket outlet 5 pin, 05 / 06 Amps flush type 240 volts complete all as specified & directed.

Supply & fixing switch piano flush type, 15 / 16 Amps single pole, one way 240 volts complete all as specified & directed.

Supply & fixing of socket outlet 3 pin, 05 / 06 Amps and 3 pin 15 / 16 Amps (2 in 1 Multipurpose) 240 volts complete all as specified & directed.

Supply and fixing bell push flush type , 5 amps , 240 volts complete all as specified and directed.

Supply and fixing door bell ding dong type , 240 volts AC complete all as specified and directed.

Supply and fixing steped type electronic fan regulator flush type AC, 230 volts, complete all as specified & directed.

Supply & fixing lamp holder (Angular / Straight), insulated body, with back plate for batten fitting all as specified and directed.

Supply and fix in repair decorative LED Tube light fitting 1x20 Watt , environmental friendly, energy efficient MS batten with retrofit T8 polycarbonate tube-01 No, complete with all accessories and fixing material complete all as specified and directed.

Supply and fixing in repair decorative LED tube light fitting 1x10 watt surface mounting , intigrated with opal diffuser complete with all acessories complete all as specified and directed.

Supply & fixing in repair of ceiling rose, 3 terminal /PVC/polycarbonate isolated body complete all as specified & directed.

Taking down carefully unserviceable Sub main wiring of any size and type, removing material from site for taking credit and making good the disturbed surfaces of walls, ceilings etc including two coats of white / colour washing / distempering etc to match the existing complete all as specified and directed.

Material and labour for sub main wiring with 2x6 Sqmm nominal cross sectional area (two single core cable of 6 Sqmm for Phase and neutral + o1 single core cable of 6.0 Sqmm for earth wire), 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor cable with and including continuous earth wire of size 6.0 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic PVC concealed conduit of 25 mm dia, medium grade with all conduit accessories / fittings, brass screws, washers etc and connected to common earth dully including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing and taking down the old unserviceable submain wiring of ant type complete all as specified & directed. Note - One meter of non-metallic PVC conduit along with 2x6.0 Sqmm wire and one 6.0 sqmm earth wire shall be measured as one length).

All as per item No 126.00 here -in- before but by using two single core cable of 4 Sqmm for Phase and neutral + 1 single core cable of 4 Sqmm for earth wire complete all as directed. Note - One meter of non-metallic PVC conduit along with 2x4.0 Sqmm wire and one 4.0 sqmm earth wire shall be measured as one length).

All as per item No 126.00 here -in- before but by using two single core cable of 10 Sqmm for Phase and neutral + 1 single core cable of 10 Sqmm for earth wire complete all as directed. Note - One meter of non-metallic PVC conduit along with 2x10.0 Sqmm wire and one 10.0 sqmm earth wire shall be measured as one length).

All as per item No 126.00 here -in- before but by using four single core cable of 10 Sqmm for Phase and neutral + 1 single core cable of 10 Sqmm for earth wire complete all as directed. Note - One meter of non-metallic PVC conduit along with 4x10.0 Sqmm wire and one 10.0 sqmm earth wire shall be measured as one length).

Taking down carefully unserviceable distribution board of any capacity including wooden board and making good the disturbed surfaces of walls, etc including two coats of white / colour washing / distempering etc to match the existing complete all as specified and directed.

Supply and fixing sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 8 way, with 200 Amps rated copper bus bar and IP - 43 protection with metal double door and flush to wall including all cutting / chases on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces and taking down the old distribution board of any type complete all as specified and directed.

Supply and fixing in repair sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 12 way, with 200 Amps rated copper bus bar and IP - 43 protection with metal double door and flush to wall including all cutting on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces and taking down the old distribution board of any type complete all as specified and directed.

Supply and fixing in repair sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 4 way, with 200 Amps rated copper bus bar and IP - 43 protection with metal double door and flush to wall including all cutting / chases on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces and taking down the old distribution board of any type complete all as specified and directed.

Supply and fixing in repair MCB, SP, AC, 240 volts "B" series capacity of 06 to 32 Amps, 10kA and making connections complete all as specified & directed.

Supply & fixing in repair MCB, SPN ( Single Pole and Neutral), AC, 240 volts, B series capacity 40 Amps to 63 Amps 10kA and making connections complete all as specified & directed.

Supply and fixing in repair sheet metal enclosure, Triple pole and neutral AC, 415 volts, 04 way, with 200 Amps rated copper bus bar and IP - 43 & IK 09 protection including provision for four pole isolator/mcb as incomer with metal double door and flush to wall including all cutting etc on wall and making good including two coats of white / colour washing / distempering etc to match the existing disturbed surfaces and taking down the old distribution board of any type complete all as directed.

S&F in repair MCB 4 pole 'B' series 32 to 40 Amp AMP amps capacity AC 415 V,10kA complete all as specified and directed.

Supply & fixing in repair industrial type SPN enclosure with a two pin and earth plug and socket complete with and including 20 Amps MCB, single pole, AC, 240 volts and flush to wall including all cuttings & chases etc on wall and making good including two coats of white / colour washing / distempering etc to match the existing disturbed surfaces complete all as directed.

S & F in repair, security light brackets of 32 mm dia GI pipe medium grade upto 0.6 mtr long bend to required shape including flat iron clamps- 02 Nos with suitable size of nuts and bolts including grouted in wall complete, including distempering to match with existing surface all as specified and directed .

Supply and fixing in repair LED security light fitting 1x45 Watt luminaries with die cast aluminium housing IP-66 comprising epoxy powder coated enclosed with glass coverembedded lens in frame with high power LED white lamp type of capacity 45 watt complete all as specified and directed Make:- Crompton/Bajaj/Surya

All as per item No 108.00 here -in- before but capacity 25/30 watt. : Make:- Crompton/ Bajaj/Surya

Supply and fixing in repair LED light 12 watt square/Round type of size 150x 150mm surface/ ceiling mounted with aluminium hausing and frosted cover complete all as specified and direcred . Make- Crompton / Bajaj /Surya

Supply and fix in replacement of decorative wall light fixture made up of polycarbonate suitable for 10 W retrofit LED lamp and including 10 W LED lamp and including all accessories for fixing of fitting on wall all as specified and directed by Engr-in-Charge. Make Bajaj/ Crompton /Surya

Supply and fix in repair LED lamp 9 watt of Make:- Crompton./Surya/Bajaj

Supplying and fixing in repair LED bulk head light fitting wall mounted with inbuilt edge lit LED lamp 10 watt, complete with all acessories all as specified and directed by Engr-in-Charge Make- Crompton/Bajaj/Surya

Supply and fix in repair switch piano flush type, 05 / 06 Amps single pole, one way 240 volts complete all as specified & directed.

All as per item No 146.00 here -in- before but socket outlet 5 pin, 05 / 06 Amps flush type 240 volts .

All as per item No 146.00 here -in- before but switch piano flush type, 15 / 16 Amps single pole, one way 240 volts

All as per item No 146.00 here -in- before but socket outlet 3 pin, 05 / 06 Amps and 3 pin 15 / 16 Amps (2 in 1 Multipurpose) 240 volts.

All as per item No 146.00 here -in- before but switch bell push flush type , 5 amps , 240 volts

All as per item No 146.00 here -in- before but door bell ding dong type , 240 volts AC .

All as per item No 146.00 here -in- before but steped / Switch type electronic fan regulator flush type AC, 230 volts as per site requirement

All as per item No 146.00 here -in- before but lamp holder (Angular / Straight), insulated body, with back plate for batten fitting

Supply & fixing in replacement of modular switch one way 06 Amps,1 module, 240 volts complete all as specified & directed.

Supply & fixing in replacement of modular socket one way 6 Amps,2/3 pin combined ,2 module, 240 volts complete all as specified & directed.

Supply & fixing in replacement of modular switch one way 16 Amps,1 module, 240 volts complete all as specified & directed.

Supply & fixing in replacement of modular socket one way 6/16 Amps,2/3 pin combined ,2 module, 240 volts complete all as specified & directed.

Supply & fixing in replacement of modular Bell Push 6A,(1 or 2 module as per site), 240 volts complete all as specified & directed.

Supply & fixing in replacement of modular fan step regulator 2 Module complete all as specified & directed.

Supply & fixing in replacement of modular switch two way 06 Amps,1 module, 240 volts complete all as specified & directed.

Supply & fixing in replacement of modular white cover plate with frame,3 module for 6 / 16 Amps Switches And Sockets, 240 volts complete all as specified & directed.

Supply & fixing in replacement of modular white cover plate with frame,4 module, 240 volts complete all as specified & directed.

Supply & fixing in replacement of modular white cover plate with frame,6 module, 240 volts complete all as specified & directed.

Supply & fixing in replacement of modular white cover plate with frame,8 module, 240 volts complete all as specified & directed.

Supply & fixing in replacement of modular white cover plate with frame,12 or more Module Required at site module, 240 volts complete all as specified & directed.

vibha associates

B.K.construction

M/S AMAR ELEKTRO CENTRE

SA construction co.

R.D.Builders