REPAIRS TO WALL AND FLOOR TILES, SANITARY FITTINGS, OHT, PIPE LINE, KITCHEN SLABS, FALSE CEILING, EXTERNAL AND INTERNAL PAINTING AND OTHER CONNECTED WORKS AT CE RND, DMDE OFFICE AND RESIDENTIAL AREAS SEC BAD UNDER GE KANCHANBAGH, HYDERABAD.

Amount

Notes for item No 01 to 63 : (i) Material required for white wash, cement base paint distemper, synthetic enamel paint, external weather proof paint internal emulson paint required as per company specificaton shall be brought in sealed pack/ container and kept in office store and shall be issued to the contractor when required as per consumption. (ii) Paint/White wash shall be carried out only after laying neccessary protection covers/ papers to avoid paint splashes on floors. (iii) Distemper/ emulsion / external emulsion/ synthetic enamel/ primer shall only applied with same brand rollers and tools as approved material make. (iv) Colour of paint may vary from building to building as order by GE without any extra cost to the Govt. (v) Weather proof painting on new surfaces and complete removal surfaces shall be done by authorised applicator and guarantee as per CA shall be obtained from applicator. (vi) The work has to be carried out in upto G+5th storeyed building. Necessary transportations and T&P required to complete the jobs/complaints shall be provided by the contractor without any extra cost to the department and cost thereof shall deemed to be included in quoted rates by thecontractor against respective item of schedule 'A'. (vii) Contractor's supervisor will collect Bldg No from AGE B/R II Secundrabad office for daily bases at 9.00 AM and feedback should be provide same working day at 05.00 PM. After complition of work User/Occupant signature should done without fail. (viii) The cost of Scaffolding wherever required are deemed to be included in the rates quoted by the contractor. (ix) Demolition debris shall be removed from the premiser the same of demolition to avoid inconvinice of residents. (x) Scraping, putty rubing shall be done by smart care vaccum sander to avoid inconvinice to residents.

Demolition Brick work or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M & L for Brick work with sub class 'B' old size bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar (1:4). complete all as directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc and removing rubbish outside MOD land complete all as specified and directed.

M & L for rendering 15mm thick in cement mortar (1:4) on fair faces of brick/Stone or concrete surfaces, finished even and smooth without using extra cement complete all as directed.

M&L for preparation of new plastered surfaces and applying two coats of weather proof antifungal exterior paint as per manufacturers instructions over a coat of true care exterior wall primer complete all as specified and as directed . Make:- APEX ULTIMA of ASIAN PAINT/ WEATHER COAT SMOOTH(BERGER PAINTS)/ WEATHER SHIELD MAX EXTERIOR ACRYLIC(DULUX)

M&L for complete removal of existing treatment from surfaces of walls/ ceiling, washing with water and applying two coats of OBD paint as per manufacturers instructions over a coat of primer over two coats of putty 1.5mm thick each layer each to level the surface and finished smooth with emery paper No.180 followed by emery paper No.320 or 400 and wipe it clean complete all as specified and as directed by Eng-in-charge. Make:- TRACTOR EMULSION of ASIAN PAINTS /JOHNSON & NICHOLSON (JOHNSOLIN)/ BERGER PAINT Note:- (i) The putty surface should be finished even smooth and dent free before application of primer, stage passing shall be taken for each building at every stage. ii) Paint work should be carried out by Authorised applicator with brand waranty.

M&L for preparation of old decorated surface of exterior wall by removing existing treatment and washing with water and applying two coats of exterior antifungal acrylic emulsion paint as per manufacturers instructions over a coat of exterior water based primer of same make all as specified and prescribed by manufacture of paint and as directed at site by Engineer-in-Charge. Make:- APEX ULTIMA of ASIAN PAINT/ WEATHER COAT SMOOTH (BERGER PAINTS)/ WEATHER SHIELD MAX EXTERIOR ACRYLIC(DULUX) Note:- i) Paint work should be carried out by Authorised applicator with brand waranty. ii) The work carryout upto 4 story bldgs and rates are incl necessory eqpt and Scaffolding.

M&L for preparation of old painted steel/iron surafces of any description, not otherwise descri-bed, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as directed

M&L for preparation of old painted wooden surafces of any description, not otherwise descri-bed, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as directed

M&L in repairs Mild steel framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0

M&L preparation of new steel surface of any description not other wise described over 10 cm width or girth and applying two coat of synthetic enamel paint over one coat of red oxide complete all as specified.

S&F Non skid joint less coloured ceramic tiles 7-8mm thick size 300x300 mm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and laid over M&L 20 mm thick screed bed or bedding layer of cement mortar 1:6 complete all as specified incl dismantling of old tiles

S&F Non skid joint less coloured ceramic tiles 7-8mm thick size 400x400 mm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and laid over M&L 20 mm thick screed bed or bedding layer of cement mortar 1:6 complete all as specified incl dismantling of old tiles

M&L for glazed ceramic coloured tiles in vertical surfaces 450x300x7mm thick set and jointed in neat cement slurry and pointed with white or coloured cement over 15mm thick rendering or bedding layer of cement mortar 1:4 and incl dismantling of old tiles complete all as specified.

M&L vitrified tiles of any shade 10mm thick (square/ rectangular) polished area of each tiles n. exc 0.36 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 20 mm thick screed bed or bedding layer in CM 1:6 incl dismantling of old floor tiling and removing rubbish off the premises all as specified and directed.

All as per item No.15 above but as in skirting and vertical surfaces, set and jointed in neat cement slurry and pointed with white or coloured cement laid over 10 mm thick backing coat of cement mortar 1:4 including dismantling existing tile work with plaster complete all as specified and directed.

Demoltion of cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removing debris outside MOD land.

M&L for 100 mm thick Cement concrete type C-2, 1:3:6 (using 40mm graded stone aggregate) as in sub base of floors complete all as specified and directed.

M&L for chequered cement concrete tile machine pressed PU coated with grey cement and pigment of size 300x300x19/20mm laid over screed bedding layer 15 mm thick in CM 1:6 including demolition of existing old tiles complete all as specified and as directed.

M&L for Machine pressed precast concrete interlocking paver block PU coated with grey cement and pigments any shape and size confirming to IS 15658 - 2006 of 60 mm thickness, M - 35 Grade with grey cement and pigment over 50mm thick sand cushioning including demolition of existing old tiles complete all as specified and as directed

M & L for 18 to 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like including pointing white cement (1:2) using marble dust with admixture of pigment to match the shade of granite including cutting grooves and nosing laid over 15mm thick screed bed in CM 1:6 including demolition of existing granite complete all as specified and directed.

Supply & fixing of UPVC windows or UPVC framed portion 3 track 3 panel sliding window with two glazed and one SS wire mesh sliding shutters of profile width of from 40 mm to 45 mm, limit thermal conductivity to l.3 Kcal/sqm/hr centigrade, sound insulation up to 4-0 bds, Density, 1.46 gm/ml, Tenstile strength - 43.9N/sqmm, % Elongation at break - 215, Tenstile mpduls - 2840N/Sqmm, Flexural strength - 51N/sqmm, Heat aging at 150 degrees - No surface defect, Thickness - 2 mm, Flexural moduls elasticity 2200N / sqmm, double baskets & wool pile on window, multi point gear locking at different sides of frame, anti lift device on slide windows with temper proof screws with and including glazed shutter fixed with 5 mm thick plain sheet glass & wire mesh shutter with stain less steel wire cloth 304 grade stainless steel with 0.254 mm (30 gauge) dia of steel wire and 0.95 mm width of aperature complete all as specified. incl dismantling of old windows any descriptions and any size.

S&F in repairs vitreous China wash down water closet pan (Pedestal Pattern) with P or S trap, white including fixing bolts, plastic water closet seat, White, closed pattern, solid type with flat bottom, and cover and mild steel chromium plated hinging device and flush pipe complete all as directed. Make: Parryware/ Hindware/ Cera

Cleaning of Septic tanks of 150 user's capacity by dewatering mechanically all the water, taking out the sludge/night soil, cleaning the chocked inlets, outlets of septic tanks, removing all the sludge outside MD land, complete all as directed.

S&F in repair viterous china water closet Orissa pattern of 580 mm x 440 mm white with intergral foot rests including provision of P or S trap including connection to flushing pipe and complete making good to floor all as directed. Make: Parryware / HIindware/ Cera

S&F in repairs viterous china WHB white flat back size 550 mm x 400 mm excluding taps and including brackest , waste coupling , waste pipe and PVC connection and including cutting for & pinning in ends of brackets complete all as directed. Make:Parryware/ Hindware/ Cera

S&F in repairs 10 Litre capacity PVC low level flushing cistern with ball valve and handle/push button 32mm dia PVC flush pipe.

S&F in repairs pillar taps of 15 mm bore fancy type cast copper alloy with capstan heads, chromium plated,screwed down high pressure with or without lettered hot cold with long screwed shanks and fly nuts screwed for iron pipe complete all as directed

S&F in repairs brass chromium plated health faucet with 1.2m long PVC tube & wall hook. screwed for 15mm dia bore iron pipe complete all as specified. Make: Hindware or equivalent

S&F in repairs brass chromium plated two in one tap screwed for 15mm dia bore iron pipe complete all as specified and directed. ISI marked

S&F in repairs brass chromium plated shower rose with swivel joints 125mm dia incl stainless steel arm, ISI marked incl fixing to steel pipe or union.ISI marked

S&F in repairs stainless steel grating of 100 mm dia CP grating for nahani traps with or without hole for waste pipe complete all as directed

S&F in repairs PVC connections 15mm size with PTMT nuts of length 600mm long complete all as directed. ISI marked

S&F in repairs 15 mm dia long nose bib taps, cast copper alloy chromium plated with capston head , screwed down, screwed for iron pipe complete all as directed. ISI marked

S&F in repairs 15 mm dia Bib taps, cast copper alloy chromium plated with capston head , screwed down, screwed for iron pipe complete all as directed.ISI marked.

S&F in repairs angle valve fancy type cast copper alloy chromium plated with capstan head serewed down for 15 mm dia iron/CPVC pipe complete all as specified.

S&F in repair sink made of stainless steel 1mm thick for kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, incl pvc waste pipe and cp waste fitting.overall size 495 mm x 420 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed.

Supply and fixing in repairs 15mm & 20mm GI small fittings such as socket, elbow, nipple, tee, union, Double Nippel etc for galvanised iron 15mm & 20 mm bore pipe complete all as specified and as directed. Note:- Taking down and refixing of old GI tubing upto 1.5m included in rates.

S&F in repairs 16 mm bore of CPVC pipes SDR 11 & plain fiitings and fixed complete to wall or laid in floor complete all as directed.

S&F in repairs 20 mm bore of CPVC pipes SDR 11 & plain fiitings and fixed complete to wall or laid in floor complete all as directed.

S&F in repairs Rotational moulded polythylene water storage tanks,three layers white in colour (Cylindrical vertical with threaded lid) hoisted and fixed in position, 1000 litres capacity.

S&F in repairs 18/19 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws as in cup board shutter, shelves and similar items fixed to timber frame/Beeding work complete all as specified and directed.

S&F in repairs chromium plated brass double soap dish with screws complete.

S&F in repairs 40mm dia brass polished cup board knobs fixed with nuts and screws all as directed.

S&F in repair CP brass 3 in 1 wall mounted mixture with telephone hand shower complete all as directed. Make: Jaquar/Hindware/Parryware

S&F in repair telephone hand shower complete all as directed. Make:Jaquar/Hindware/Parryware

S&F in repairs stainless steel peg set of 06 hooks complete all as directed

S&F in repairs SS chromium plated tubular towel rail 20mm dia, D type, 600 mm long between flanges complete all as directed

S&F in repairs plastic water closet seat, white/colour, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging devise complete all as directed.

Taking down chowkats or frame with shutters (without taking off shutters from frame) but each not exceeding 1.50 Sqm

Taking down shutters of any description exc 2 sqm and nexc 4 sqm each and removing away from site complete all as specified and directed.

S&F factory made solid PVC door frame of size 50 mm x 47 mm made out of 5mm wood grain printed PVC sheet reinforced with MS square tube manufactured as per SSR Part I specifications and drawing.

S&F factory made solid PVC moulded door shutter 28 to 30 mm thick (style) with 2,4 or 6 raised panel design with 2mm thick mouded PVC sheet on front face & 2mm plain colour PVC sheet on back face with particle board core all as per specification and directed.

S&F 35 mm thick flush door shutter, solid core construction with block board core and plywood face panels, commercial type on both sides all as specified and directed.

S&F mild steel butt hinges, medium weight cold rolled 100 mm size complete all as specified.

S&F 200 mm long Aluminium, anodised, barrel tower bolts of extruded section and fixed.

S&F 250 mm long brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and directed.

S&F 200 mm long Extruded Aluminium alloy handles, fabricated type, anodised.

S&F 35mm thick factory made 2nd class HW glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, gauze etc size of members as specified in SSR part-I, section 8, clause 8.24(a) supplied and fixed to chowkats, including M&L for providing members of wooden stiffeners of size 60x30mm horizontally and vertically to each top panel and vertically to each bottom panel of wire gauge shutter complete all as specified and directed

M&L running welding in repairs exc 2.5 cm length but n.exc 5 cm (thickness of metal to be welded n.exc 6 mm) complete all as directed.

S&F 3 mm thick figured glass, pin headed type and glazing with oil putty and glazing clip in metal frame or second class hard wood beading in suitable size for wooden frames on squares not exceeding 0.5 Sqm in each pane including hacking out existing damaged glass work complete all as directed.

S&F stainless steel wire cloth 304 grade stainless steel with 0.254 mm (30 gauge) dia of steel wire and 0.95 mm width of aperature and fixed along with aluminium anodised mesh of size 10x10x1.0mm thick fixed with tinned tacks or galvanised wire staples etc as in panels of wire gauzed shutter complete all as specified and directed.

M/s ANUSHA ENTERPRISES

sanjar enterprises

hari enterprises

Bismi Engineering

Ravi Enterprises

Shreshta Associates

SRI SAI ENTERPRISES