RequiredExperience with Government
RequiredAnnual Turnover
RequiredCertificate (Requested in ATC)
RequiredOEM Authorization Certificate
RequiredOEM Annual Turnover Bid to RA enabled No Note: 1. OEM Turn Over Criteria: The minimum average annual financial turnover of the OEM of the offered product during the last three years
Requiredending on 31st March of the previous financial year
Requiredshould be as indicated in the bid document. Documentary evidence in the form of certified Audited Balance Sheets of relevant periods or a certificate from the Chartered Accountant/Cost Accountant indicating the turnover details for the relevant period shall be uploaded with the bid. In case the date of constitution/incorporation of the OEM is less than 3 year old
Requiredthe average turnover in respect of the completed financial years after the date of constitution shall be taken into account for this criteria. E Cart For Garbage With Tipping Facility ( 6 pieces ) Technical Specifications 1/6 * As per GeM Category Specification Specification Specification Name Values Bid Requirement (Allowed Values) Generic Parameters Type of E Cart Fully Electric
RequiredBattery Operated Motor Driven for Carrying Bins * Model Number of E- Cart - * Colour of E Cart - * The E Cart Must Fabricated From Good Quality Steel properly Painted to avoid Rusting for more than 5 Years
RequiredYES * Name and Grade of Steel from which E Cart Body Framed - * Kerb Weight of E- Cart (kg) 319 * Garbage Carrying Capacity (kg) 310 310.0 - 310.0 Or higher Run Distance (for a Full Charge of Battery
Requiredto be tested with full load at maximum AIS-040 )) (km) 85 More than 85.0 Or higher Number of Bins 2 2 Capacity of Individual Bins in litres (Ltrs) 150 150.0 Type of Chassis for E cart - * Ground Clearance as per IS : 9435 (mm) 180 * Wheel Base (mm) 2200 More than 2200.0 Or higher Turning Radius (mm) 2800 Less than 2800.0 Or lower Power Transmission from Motor Shaft to Wheels Direct Mounting Direct Mounting Please Specify the Mechanical Mechanism otherwise Put NA - * Tipping Facility Yes * 2/6 Tipping Angle 75 75.0 - 90.0 Or higher Method of Tipping Hydraulic Hydraulic If Others
Requiredmention the method of Tipping - * Type of Battery as per AIS-048 Lead Acid
RequiredEV Grade
RequiredTubular Deep Discharge Lead Acid
RequiredEV Grade
RequiredTubular Deep Discharge Capacity of the Battery approved by ICAT/ARAI (Ah) 110 110.0 - 9999999.0 Or higher Battery Voltage
RequiredNominal (Volts) 48V 48V Maximum Overall Dimensions of the Battery ( L x Wx H ) (mm3) - * Nominal Filled Weight of the Battery (kg) 115 * Motor Controller ( Must Suitable for starting
Requiredaccelerating
Requireddecelerating
Requireddriving
Requiredand stopping of E Cart - * Battery Charger 220/230 V Nominal Input Voltage
RequiredHigh Efficiency Type * Charging Current (A) 12 * Type of Motor Brushless DC Motor * Motor Output Power
Required48V/60V at Full Load (watt) 2000 2000.0 - 2000.0 Or higher Overall Efficiency of the E Cart ( to be tested at Full Load with maximum speed as per Concerned AIS standards (%) 85 85.0 - 100.0 Or higher Gradeability of E-cart
Required( to be tested at full procedure as per AIS -003 Load (Degree) 24 * Certification Vehicle Certification ICAT ICAT If Vehicle Certification from Others Agency
RequiredName of the Agency otherwise put NA - * Vehicle Certification - * 3/6 Number and Date Constructional Seating Facility For Driver only * Length of E -cart as per Gazette Notification by Ministry of Road and Transport Oct
Required2014 (meters) 2.8 * Width of E -Cart as per Gazette Notification by Ministry of Road and Transport Oct
Required2014 (meters) 0.91 * Height of E -Cart as per Gazette Notification by Ministry of Road and Transport Oct
Required2014 (meters) 1.545 * Dimensions of the cabin Provided for Bins (mm x mm x mm) (mm3) - * Size of Front Tyre (mm) - * Size of Rear Tyre - * Brake Type (Front) - * Brake Type ( Rear ) - * Suspension System (Front) - * Suspension System ( Rear ) - * Reverse Gear Facility Yes * The Mounting of Batteries Yes * Vehicle lighting System Filament Type Filament Type Instrument Panel Containing Speedometer and Battery Charging Indicator Yes * Glass Windshield with wiper motor as approved by ICAT/ARAI Yes * Battery Make as per AIS :048:2009 Others Others If others please specify the Name of Brand
RequiredOtherwise put NA (as per AIS048 2009) - * 4/6 Equipped with Start and Stop Button
Requiredparking Lights
RequiredBack lights with Reverse Gear Facility Yes * Equipped with Fire Extinguisher Yes * Equipped with First Aid Box Yes * Yellow Color reflective tape on Front and Rear Side of the E Cart Yes * E Cart Integration
RequiredYes * Performance Parameters Speed of the E- Rickshaw as per CMVR -2014 with latest amndmt (to be tested with Full Load ) (kmph) 21 * Battery Warranty 1 1
Required2
Required3 Or higher No. Of Free Service 2 2
Required3
Required4
Required5 Or higher Compliance of Centre of Gravity of E Cart as a Compulsory Norms for Safety Yes * Confirming to Applicable Environmental Test Yes * Noise level must be Low during Operation Yes * * Specifications highlighted in bold are the Golden Parameters. * Bidders may note that In respect of non-golden Parameters
Requiredthe specifications 'Values' chosen by Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer. Additional Specification Documents
