WBPWD/EE/KNHED/NIQ-69/22-23

Amount

Cost of labour charges for dismantling the existing E.I & mending good the damages as to G.S

S & F LED round Surface light 230V, Wattage: 18 / 22 watts. Lumen output-1700 LM, Surface Mounted Surface downlighters with a slim & sleek profile Wide voltage protection Even & comfortable lighting. (Model No: WWH: 929001951616, NW: 929001951617, CDL: 929001951618 •) Slim, sleek profile – 25mm thickness. comfortable light perfected for well being • No visible flickering and low glare to prevent eye strain • No harmful UV and IR radiation • Surge protection of 2 kV and wide voltage range protection of 160-360V • • BIS safety standard and IEC 60598 registered • dimensions - D-300mm, H-25mm.

Distn. Wiring in 1.1Kv gr. 2x1.5 sqmm +1x1.5 sqmm single core stranded FR PVC insulated & unsheathed cu. Wire (approved make) in 19 mm bore, 3mm thick polythene pipe complete with all accessories in wall to light/fan/call bell points with piano type switch (anchor) fixed on Moduler GI switch board cum JB on wall complete with 2 nos suitable size Ph &N Cu bar incl. Bakelite/Perspex top cover 3 mm thick and incl. 175 x 100 x 65 mm inspection box, making earthing attachment incl mending good damages as to g.s. Avarage run 10 mtrs

Do----do--- 5A plug point incl. 5A switch & 5A plug socket (anchor)-1set with making necy. Connection On board

Distn. Wiring in 1.1 Kv gr. Single core stranded ‘FR’ PVC insulated & unsheathed cu. wire (Approved make) in 20 mm size PVC rigid conduit ‘FR’ (precession) incl. necy. Fitting as reqd. a) 2 x1.5 sqmm + 1x 1.5sqmm for ECC

b) 2 x 2.5 sqmm + 1 x 1.5 sqmm for ECC

c) 2 x 4 sqmm + 1 x 2.5 sqmm for ECC

d)2 x 6 sqmm + 1 x 4 sqmm for ECC

Finishing the end of copper wire of the following sizes by crimping method as per G.S 1.5 sqmm

Supply & Laying 1.1 Kv gr. 3 Core 10 mm² XLPE Ar./Al. Cable on Surface of wall as to G.S.

Supply & Laying 1.1 Kv gr. 3 Core 6 mm² XLPE Ar./Al. Cable on Surface of wall as to G.S.

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armored cables as below : 3 core 10 sq mm

3 core 6 sq mm

S & F of Twin LED Tube light fitting [Make - Philips cat no. TMC 501 P 2x T-LED/Crompton cat no. IGP162 LT8-16 / Wipro, cat no.WIO922208/complete with 2x18/20 Watt LED tube lamps [Make - Philips Master LED tube model no.18W 865 T8 I 2100lm / Crompton cat no. LTT8-20 / Wipro cat no.- LL13-181-65SE ] suspended below the ceiling with S&F 2x20mm dia EI conduit up to 25 cm long with 'L' type MS clamp and making connection as to GS

Supply & Delivery 215V, 18/20 W, 4 feet long Single LED Tube light [Make - Philips Master LED tube model no.18 W 865 T8 I 2100lm/ CG )

Supply & fixing 230V, 200 W street light LED fittings with inbuilt till angle arrangement etc. The fittings will be fitted on wall with the arm bracket ,incl. cunnecting wire , making necy. connection for use [Make:- Crompton Greaves /Philips /wipro] Cat noPHILIPS - BRP 340 LED 200 CW HO SLC S2 PSU GR .

Supply & fixing 230V, 150 W street light LED fittings with inbuilt till angle arrangement etc. The fittings will be fitted on wall with the arm bracket,incl. cunnecting wire , making necy. connection for use [Make:- Crompton Greaves /Philips/wipro] Cat noPHILIPS - BRP 340 LED 150 CW HO SLC S2 PSU GR .

S&F of 90 Watt LED street light ( IP 66 ), aerodynamically designed with better thermal management with separate lamp housing with heat resistant toughened glass & control gear housing and potted driver provided with surge protection suitable for mounting on 50 mm dia (OD) with Arm bracket [Make: Crompton, Cat No. LSTN - 90-CDL-A / Philips, Type - BRP 410 LED 90CLW HE MR PC S2 PSU GR / Wipro, cat no. LR02 - 102 - XXX -57 -XX ].

S/F 16 SWG 250 x 200 x 100 mm stainless steel loop box with 4 nos connector fixed on porcelain chair, recessed in wall with hinged top cover, rubber gasket, mechanical locking arrangement incl. S/F 1 no. 250V 15A porcelain kitkat fuse with earthing attachment complete.

S & F Vista glow 9 W LED ( make-philips) bulk head with IP65 Protection & IKO8 impact resistance suitable for surface LED bulkhead luminaires. (Make- philips/Bajaj/CG/).

S&F (7" x 4") separate plug board with bakelite top cover on wall comprising of 1no 6A plug socket with 6A piano key type (Anchor make) switch including necessary interconnection complete

Supply & Fixing 230V, 50HZ, 1420 rpm, 450mm, 18'' sweep heavy duty full metal body /Decorative type wall bracket fan with all accessories on wall with necy. bolts & nuts. ( make- CG/EPC)

S&Fixing exhaust fan( Make -EPC ) (12") 240V , 50Hz & 1400 RPM after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter

S&F (10" x 8") Computer board with bakelite top cover on wall comprising of 1no 15A plug socket with 15A piano key (Anckor make) switch , 1no 16A MCB & 1no indicator & 3nos. 5A plug socket with 5A piano key type (Anchor make) switch including necessary interconnection complete

S & F 250 V 25A single phase timer controller in SS double door 2+10 way DB enclosure with S&F following electrical accessories & front door locking arrangement with all connection by finishing the ends of 2x4 & 1x2.5 copper wire dowells solderless socket by crimping method as to GS earthing attachment on wall incl necessary connections as per direction of EIC:-(Make -L&T/ABB?Schneider) i)25A DP MCB ----1No ii)3 Pole power contractor ---- 2 nos. iii)24 Hr p[rogrammable Digital Timer-------1No iv)wiring

Supplying and fixing 230V 6/10A, 2+10 way SPN MCBDB (Make: Legrand) comprising of 1no. 40A DP Isolator & 10nos. 6/10A SPMCB double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment . (Legrand Make. Cat no. 607712)

Opening the exixting Tube fittuing from its original posstion .

S&F compression type cable gland and end finishing of the following PVC/A cable by crimping sockets as per G.S. 4 core 35 sqmm

Finishing the end of copper wire of the following sizes by crimping method as per G.S. 1.5 sqmm

S & F of 90 watt LED flood light (Make - Philips /Crompton LFLN-90-CDL/60 or as per EIC )LED fittings fittings on the Arm bracket fixed /projected from the wall of the building incl. making holes to building with other accessories as required (lumen efficiency not less than 90 lumen per watt).

Fixing the single / twine Tube light fittings with existing clamp after cutting the exiting down rod as per GS .

Opening the exixting fan from its origigal posstion .

Repairing & rewiring of Glow Sign board with all necessay LED module s&fixing & letters

Fixing the exixting fan with existing clamp after cutting the exiting down rod including drilling hole as per GS .

Opening the existing surface distribution wiring and refixing the same with supply and fixing saddle ( Preccision ) make as to GS .

Supply & Fixing 240 V, 20 A Piano key type switch (Brand approved by EIC) on sheet metal switch board incl. S & F 100x100x65mm MS (16SWG) switch board and bakelite / perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required

Terms and condition The Agency must procure the materials from the Manufacturer / OEM or from their authorised sales channel so that the standard warranty / support of the Manufacturer / OEM becomes applicable to the products to be delivered and installed by them. Documents that authenticates such procurement from the Manufacturer / OEM or from their authorized sales channel and standard warranty / support should be sent from the e-mail of the Manufacturer / OEM / authorized sales channel to the e-mail of Engineer-in-Charge and hard copy of it to be submitted during execution, of Work/submission of bill. If any refurbished material is supplied and installed, penal action will be taken as per existing rules

Special Terms and Conditions 1. It is stated that the above work place is existing COVID Hospital, In case of any mishap or accidental to any staff that deputed by the agency the whole responsibility is to be borne by the concern agency. 2. The Agency shall be responsible for provisioning of all COVID safety measures including regular sanitiziation of work places, vaccination of employees and compliance of stated directive and COVID appropriate norms. 3. All the issues related to the safety of the staffs should be taken care by the agency itself. (Rate should be quotated including all taxes and duties)

Defect Labilities period for 01 year from the date of completion of work. (Rate should be quotated including all taxes and duties)

Electromech Engineers Co-Operative Society Ltd.

ALPHA ELECTRICALS

M/s Singh Electrical Works

M/S R. K. ENTERPRISE