Comprehensive repair, Improvement & upgradation Officers of existing Bungalows in Railway North Colony/MB under ADEN/HQ/MB.

Item Breakup - A-DSR Items

of 88 mm, weighing not less than 170 gms 17.74 Providing and fixing PTMT shelf 440 mm Each 7 607.05 4249.35 long, 124 mm width and 36 mm height of 20 approved quality and colour, weighing not less than 300 gms. 17.81 Providing and fixing floor mounted, white Each 4 16100.4 64401.6 vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual 21 flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. Total 330462.10 Item- 16 All items of DSR ch. No - 18(Water supply) S No. Item No Description of Item Unit Qty Rate Amount 18.0 WATER SUPPLY 18.7S C.P.V.C. PIPES Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of 18.8 pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge, Concealed work, including cutting chases and making good the wall etc. 1 18.8.1 15 mm nominal dia Pipes Metre 66 441.15 29115.9 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and 18.10 making good the walls etc.-Internal work - Exposed on wall 2 18.10.1 15 mm dia nominal bore Metre 20 304.15 6083 MORADABAD DIVISION-ENGINEERING/NORTHERN RLY Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, 18.11 including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : 3 18.11.1 15 mm dia nominal bore Metre 20 485.2 9704 Providing and fixing G.I. pipes complete 18.12 with G.I. fittings including trenching and refilling etc.-External work 4 18.12.1 15 mm dia nominal bore Metre 13 267.5 3477.5 18.15S BRASS FITTINGS Providing and fixing ball valve (brass) of 18.18 approved quality, High or low pressure, with plastic floats complete : 5 18.18.1 15 mm nominal bore Each 7 348.85 2441.95 Providing and fixing uplasticised PVC 18.21 connection pipe with brass unions : 18.21.1 30 cm length 6 18.21.1.1 15 mm nominal bore Each 7 74.8 523.6 18.21.2 45 cm length 7 18.21.2.1 15 mm nominal bore Each 7 85.2 596.4 Providing and fixing C.P. brass shower rose 18.22 with 15 or 20 mm inlet : 8 18.22.2 150 mm diameter Each 20 190.1 3802 C.I. SLUICE VALVES/ FIRE HYDRANTS & 18.31S FIXTURES Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including 18.47 excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 9 18.47.1 15 mm nominal bore Each 3 682.9 2048.7 18.48 Providing and placing on terrace (at all floor Litre 2623 9.7 25443.1 levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable 10 locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 18.49S C.P. BRASS FITTINGS Providing and fixing C.P. brass bib cock of 18.49 approved quality conforming to IS:8931 : 11 18.49.1 15 mm nominal bore Each 7 434.2 3039.4 Providing and fixing C.P. brass long nose bib cock of approved quality conforming to 18.50 IS standards and weighing not less than 810 gms. 12 18.50.1 15 mm nominal bore Each 4 715.05 2860.2 Providing and fixing C.P. brass long body bib cock of approved quality conforming to 18.51 IS standards and weighing not less than 690 gms. 13 18.51.1 15 mm nominal bore Each 53 708.4 37545.2 Providing and fixing C.P. brass stop cock 18.52 (concealed) of standard design and of approved make conforming to IS:8931. 14 18.52.1 15 mm nominal bore Each 7 594.75 4163.25 Providing and fixing C.P. brass angle valve 18.53 for basin mixer and geyser points of approved quality conforming to IS:8931 15 18.53.1 15mm nominal bore Each 66 500.35 33023.1 MORADABAD DIVISION-ENGINEERING/NORTHERN RLY Providing and fixing PTMT grating of 18.58 approved quality and colour. 18.58.1 Circular type 16 18.58.1.1 100 mm nominal dia Each 10 33.2 332 18.59S AIR VALVE & WATER METER (BULK TYPE) Providing and fixing unplasticised P.V.C. 18.74 connection pipe with PTMT Nuts, collar and bush of approved quality and colour. 17 18.74.2 15 mm nominal bore with 45 cm length Each 10 107.9 1079 Total 165278.30 Item- 17 All items of DSR ch. No - 19(Drainage) S No. Item No Description of Item Unit Qty Rate Amount 19.0 DRAINAGE Extra for depth beyond 45 cm of brick 19.31 masonry chamber : Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb 19.32 shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. 19.32.1 With common burnt clay F.P.S. (non Each 4 28029.15 112116.6 1 modular) bricks of class designation 7.5 Total 112116.60 Item- 18 All items of DSR ch. No - 21 (ALUMINIUM WORK) S No. Item No Description of Item Unit Qty Rate Amount 21.0 ALUMINIUM WORK Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required 21.1 EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : 21.1.1 For fixed portion 21.1.1.2 Powder coated aluminium (minimum Kg 190 466.3 88597 1 thickness of powder coating 50 micron) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of 21.1.2 fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) 21.1.2.2 Powder coated aluminium (minimum Kg 130 564.8 73424 2 thickness of powder coating 50 micron) MORADABAD DIVISION-ENGINEERING/NORTHERN RLY Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in 21.2 panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. 21.2.2 Pre-laminated particle board with Sqm 40 951.05 38042 3 decorative lamination on both sides Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene 21.3 gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): 21.3.1 With float glass panes of 4.0 mm thickness Sqm 1 1019.8 1019.8 4 (weight not less than 10kg/sqm) Total 201082.80