TE_RIDF_XXX_24_25_200 (i)Construction of Tea Garden Line Road of Sonapur Tea Estate near Air Force Sonapur, (ii) Construction of Tea Garden Line Road from 12 No Gate to 10 no Gate of Amchong Tea Estate, Amching Jorabat under RIDF-XXX of NABARD for th

Amount

Clearing and grubbing road land including uprooting wild vegetation, grass,bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking ofserviceable material to be used or auctioned, upto a lead of 1000 mincludingremoval and disposal of top organic soil not exceeding 150 mm in thickness asper Technical Specification Clause 201.(i) By Manual Means (a)In area of non thorny jungle

Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5 (i) Private Land

Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1. (i) Private Land

Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. (ii) For Grading II Material

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405. (A) By Manual Means

Providing and laying Interlocking Concrete Block Pavement (ICBP) conforming to IS:15658-2006 including all lead and lift complete as per technical specification and as directed. a.80mm thick interlocking precast blocks having compressive strength of 40N/sq.mm.

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801, 600mm equilateral triangle.

Providing and fixing of typical PMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1

Construction of Hume pipe NP-3 1000mm dia ( single row):- Excavation for structures E/W in excavation for structure as pwer drawing and Technical specification clause 305.1 including setting out, construction of shoring and bracing, removal of stamps and deleterious materials and disposal upto a lead of 50.00 mtr. dressing of sides and bottom, back filling in tranches with excavated suitable materials. (I) In ordinary soil, (i) Upto 3.00 m depth (without dewatering), Face wall.

Providing concrete for plain/ re-inforced concrete in open foundtions complete as per Drawing and technical Specifications clause 802, 803, 1202 & 1203. (M-10, Nominal Mix 1:3:6)

Laying (First Class) bedding on well compacted sand, moorum as per Clause 1105 (ii)

Stone Masonry work in cement mortar Stone masonry work in cement mortar 1:4 in foundation complete excluding pointing and plastering as per drawing and technical specification, clause 600, 1202 & 1203.I(i) n 1:4 cement mortar

Providing and laying RCC pipe NP-3 for culverts on 1st class bedding for granular materials in single row including fixing collar with cement morter 1:2 but excluding exavation, protection works, back filling, concrete, masonry wworks and Parapets clause 1106, 1000mm dia.

Plastering with cement morter (1:4) 15 mm thick on brick work for substructure as per Technical Specification.

Construction of Trapozodial Shaped CC Open Drain:- Excavation for Structures (Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material.(I) Without dewatering (i)upto 3 m depth

Providing concrete for Plain / Reinforcement concrete in open foundation complete as per drawing and technical specification cl 802,803,1202 & 1203 .PCC Grade M-10 (Nominal mix 1:3:6)

Reinforcement. Supplying, fitting and placing TMT bar reinforcement in sub- structure complete as per drawing and technical specification. (ii) TMT -IS 1786 (Fe 500 D) Secondary producer (ISI approved)

RCC Grade-M-20: Plain/Reinforced cement concrete, in sub structure complete as per drawing and technical specifications Clauses 802,804,805 ,806, 1202 & 1204 PCC Grade M 20 ( Nominial mix (1:2:4)

Road of Sonapur Tea Estate near Air Force, Sonapur:- Providing, laying, spreading and compacting stone aggregates to wet mix macadam specification including premixing the materials with water at OMC in mechanical mixer (Pug Mill), Carriage of mixed material by tripper to site , laying in uniform layers in sub-base / base course on a well prepared sub-base and compacting with smooth wheel roller 80-100 kN weight to acheive the desire density including lighting , barricading and maintenance of diversion etc as per tables 400.11 & 400.12 and Technical Specification clause 406

Providing and laying Interlocking Concrete Block Pavement (ICBP) conforming to IS:15658-2006 including all lead and lift complete as per technical specification and as directed. a.80mm thick interlocking precast blocks having compressive strength of 40N/sq.mm.

Construction of Hume pipe NP-3 1000mm dia ( single row):- Excavation for structures E/W in excavation for structure as pwer drawing and Technical specification clause 305.1 including setting out, construction of shoring and bracing, removal of stamps and deleterious materials and disposal upto a lead of 50.00 mtr. dressing of sides and bottom, back filling in tranches with excavated suitable materials. (I) In ordinary soil, (i) Upto 3.00 m depth (without dewatering).

Providing concrete for plain/ re-inforced concrete in open foundtions complete as per Drawing and technical Specifications clause 802, 803, 1202 & 1203. (M-10, Nominal Mix 1:3:6)

Laying (First Class) bedding on well compacted sand, moorum as per Clause 1105 (ii)

Brick Masonry work in cement mortar in foundation of wall complete excluding pointing and plastering as per drawing and technical specification cl.1100 ( In prop.1:4 )

Providing and laying RCC pipe NP-3 for culverts on 1st class bedding for granular materials in single row including fixing collar with cement morter 1:2 but excluding exavation, protection works, back filling, concrete, masonry wworks and Parapets clause 1106, 1000mm dia.

Plastering with cement morter (1:4) 15 mm thick on brick work for substructure as per Technical Specification.

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801, 600mm equilateral triangle

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801, 600mm circular

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801, 800mm x 600 mm rectangular

Providing and fixing of typical PMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1

M/S Shivam Trading & Co. (BID ID -247356)

MS JAY BHARAT CONSTRUCTION (BID ID -246418)

Alimuddin Ahmed (BID ID -246424)