Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹21.0 LAccepted-AOC | L1 | Accepted-AOC Accepted being L1 | |
| 2 | L2₹21.8 L+₹51,894 (2.44%)Rejected-Finance WZ 02 PLOT NO 05 GROUND FLOOR PUNJAB MARKET VISHNU GARDEN NEW DELHI PIN 110018 | WEST DELHI | DELHI | 110018 | L2 | Rejected-Finance Rejected. Quoted rates are higher than L1 | |
| 3 | L3₹22.9 L+₹1.6 L (7.61%)Rejected-Finance | L3 | Rejected-Finance Rejected. Quoted rates are higher than L1 | |
| 4 | L4₹23.0 L+₹1.7 L (7.92%)Rejected-Finance 16 NAVRANG SOCIETY BHAIRAVNATH CHAR RASTA MANINAGAR AHMEDABAD GUJARAT 380008 | AHMADABAD | GUJARAT | 380008 | L4 | Rejected-Finance Rejected. Quoted rates are higher than L1 | |
| 5 | L5₹23.9 L+₹2.6 L (12.4%)Rejected-Finance 61 1ST CROSS BEHIND RAILWAY GATE ANJANAYA TEEMPLE NEW LAYOUT BINNYPET BANGALORE 560 023 | BANGALORE | BENGALURU URBAN | KARNATAKA | 560023 | L5 | Rejected-Finance Rejected. Quoted rates are higher than L1 |
Tender Value
Refer Docs
EMD Value
₹66,000
Closing Date
17 Jul 2023, 6:00 pmClosed
Garrison Engineer M AF Jalahalli
Garrison Engineer M AF Jalahalli Bangalore 560013
8787REPAIR RECANNING AND UPHOLSTERY TO FURNITURE FOR AFTC AND AFS UNDER GE M AF JALAHALLI BANGALORE
2023_MES_604346_1
8787/E8
Open Tender
Miscellaneous Works
Item Rate
300 days
Garrison Engineer M AF Jalahalli
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
GE AF MAINT JALAHALLI PUBLIC FUND ACCOUNT
₹66,000
18 Aug 2023
19 Jun 2023
19 Jul 2023
19 Jun 2023
17 Jul 2023
3 Jul 2023
19 Jun 2023 - 26 Jun 2023
Amount
Material and labour for removing old unservicable cushions together with old faded tapestry cloth of Sofa set 5 seater FD-258 and provide 100mm cool foam 32 density cushion covered with new tapestry cloth for seat and 100mm cool foam 40 density cushion covered with new tapestry cloth for back of approved quality/shade, all as specified and as directed by Engr-in-Charge (Cost of tapestry cloth shall not be less than Rs. 420/- per metre) Colour and pattern as approved by GE/Engr-in-Charge:- Sofa set 5 Seater (FD-258)
Material and labour for removing old unserviceable cushions together with old faded tapestry cloth for following furniture items and provide 100mm cool foam 40 density cushion covered with new tapestry cloth for seat and back of approved quality/shade, all as specified and as directed by Engr-in-charge (cost of tapestry cloth shall not be less than Rs. 420/- per metre) Colour and pattern as approved by GE/Engr-in-Charge:-
Sofa Set 4 Seater (FD-281/373)
Sofa Set 5 Seater (FD-281/373 & FD/MAP-II/02)
Material and labour for removing old faded tapestry cloth of following Sofa Sets and provide new tapestry cloth of approved quality/shade for seat and back duly stitched with good quality zipping arrangement, all as specified and as directed by Engineer-in-Charge (cost of tapestry cloth shall not be less than Rs. 420/- per metre) Colour and pattern as approved by GE/Engr-in-Charge:-
Sofa Set 4 Seater (FD-281/373)
Sofa Set 5 Seater (FD-281/373 & FD/MAP-II/02)
Sofa chair (Single seater), (FD-281/373)
Removing the existing unsv tapestry cloth and cushion pad, supply and fix new tapestry cloth of approved quality and colour, for seat, arm rest and back over a pad of 25mm thick synthetic foam including finishing of upholstery work of high quality workmanship all as specified and directed by the Engr-in-Charge for the following (cost of tapestry cloth shall not be less than Rs. 420/- per metre) Colour and pattern as approved by GE/Engr-in-Charge:-
Chair revolving executive high back (TP)
Chair revolving executive medium back (TP)
Chair revolving executive low back (TP)
Chair writing cushioned type (FD/E6/MAP/12 & TP)
Computer Chair with arms (FD/E6/MAP/01 & TP)
Computer Chair W/O Arm (TP)
Chair Cushioned/Chair Visitors (TP)
Student chair with foldable desk (TP)
Material and labour for removing the existing broken bottom gas lift (up & down) hydraulic with pouch from all sorts of Revolving /Computer chairs and supply and fix new bottom gas lift (hydraulic) with pouch of approved quality (TP) suitable to existing chairs all as specified and directed by Engr-in-Charge.
Material and labour for removing the existing broken fibre stem base from all sorts of Revolving /Computer chairs and supply and fix new fibre stem base including castor wheels of approved quality (TP) suitable to existing chairs all as specified and directed by Engr-in-Charge.
Material and labour for removing the existing damaged/unserviceable polyurethane hand rest of Cushion chairs of sorts and supply and fixing new one-piece armrest made of black integral skin polyurethane of scratch and weather resistant and reinforced with MS insert complete, all as specified and directed by Engr-in-charge (TP)
Material and labour for removing the existing broken castor wheels from all type of Revolving/Computer chairs and supply and fix new castor wheels of approved quality (TP) suitable to existing chairs all as specified and directed by Engr-in-Charge.
Material and labour for removing old unsv cushion from Chair Dining offrs (FD/E6/MAP/10(R)) and supply and fix new cushion of 32 density, 75mm thick duly covered with tapestry cloth on 12 mm thick plywood on existing chair, all as specified and directed by Engr-in-charge (cost of tapestry cloth shall not be less than Rs. 420/- per metre) Colour and pattern as approved by GE/Engr-in-Charge.
Material and labour for removing old faded tapestry cloth to Chair Dining (FD/E6/MAP/10(R) and supply and fix new tapestry cloth of approved quality/shade for seat and back to the existing structure of Chairs, all as specified and as directed by Engineer-in-Charge (cost of tapestry cloth shall not be less than Rs. 420/- per metre) Colour and pattern as approved by GE/Engr-in-Charge.
Material and labour for removing existing old unsv seat and back from chair dining long back (FD-357) and supply and fix new seat and back made of 50 mm thick synthetic form of 28 density made to shape duly covered with approved quality rexine as per drg and as directed by Engr-in-charge (Seat and back measured as single unit)
Material and labour for carrying repairs to Sofa set 4/5 seater (FD-281/373, FD/MAP-II/02) by removing the following existing old unsv components and supply and fixing new Components as per shape and size as existing made out of well seasoned 1st class wood (teak) including French polishing to the structure of Sofas, all as specified and shown on drawing and as directed by Engr-in-Charge :-
New Seat Rails Right and left of Sofa set (Single Seater) (Each rail will be measured single unit)
New Seat Rails Front and Back of Sofa set (Single Seater) (Each rail will be measured single unit)
New Rails of back frame Top and bottom of Sofa set (Single Seater) (Each rail will be measured single unit)
New Back and bottom support of Sofa set (Single Seater) (Each rail will be measured single unit)
New long rails of seat front and back of Sofa set (Three Seater) (Each rail will be measured single unit)
New long rails of Back frame Top and bottom of Sofa set (Three Seater) (Each rail will be measured single unit)
New long Back and bottom support of Sofa set (Three Seater) (Each rail will be measured single unit)
New Arms of Sofa set.
New bearers of Seat and Back rest of Sofa set. (Each rail will be measured single unit)
Material and labour for removing the following existing unserviceable wooden members to Chair Dining (FD-228) and supply and fix new first class hard wood (teak) members, including French polishing to the structure of chairs all as specified and as shown on drg :-
Side Rail of Seat Frame
Rear Rail of Seat Frame
Front Rail of Seat Frame
Front Leg
Rear Leg
Back rest
Side Stiffener
Centre Stiffener
Material and labour for removing the following existing unserviceable wooden members to Chair Dining (FD-279 / FD/MAP-II/05) and supply and fix new first class hard wood (teak) members, including French polishing to the structure of chairs all as specified and as shown on drg :-
Side Rail of Seat Frame
Rear Rail of Seat Frame
Front Rail of Seat Frame
Front Leg
Rear Leg
Back rest
Side Stiffener
Centre Stiffener
Material and labour for removing the following existing unserviceable wooden members to Chair Writing (FD-250/280) and supply and fix new first class hard wood (teak) members, including French polishing to the structure of chairs all as specified and as shown on drg :-
Side Rail of Seat Frame
Rear Rail of Seat Frame
Front Rail of Seat Frame
Front Leg
Rear Leg
Back rest
Side Stiffener
Centre Stiffener
Arm Rest
Material and labour for removing the following existing unserviceable wooden members to Chair Easy (FD-229) and supply and fix new first class hard wood (teak) members, including French polishing to the structure of chairs all as specified and as shown on drg :-
Side Rail of Seat Frame
Rear Rail of Seat Frame
Front Rail of Seat Frame
Front Leg
Rear Leg
Arm Rest
Side Rail of Back Rest
Upper/Lower Rail of Back Rest
Material and labour for removing the following existing unserviceable wooden members to Stool Dressing (FD-252) and supply and fix new first class hard wood (teak) members, including French polishing to the structure all as specified and as shown on drg :-
Seat Frame Long Rail
Seat Frame Short Rail
Side Stiffener
Centre Stiffener
Material and labour for removing the following existing unserviceable wooden members to Table Dining 8 Persons (FD-239/273/376) and supply and fix new first class hard wood (teak) members, including French polishing to the structure all as specified and as shown on drg :-
Legs for Table Dining (FD-239)
Legs for Table Dining (FD-273)
Legs for Table Dining (FD-376)
Long Rail
Short Rail
Material and labour for removing the following existing unserviceable wooden members to Table Dining 6 Persons (FD-239/273) and supply and fix new first class hard wood (teak) members, including French polishing to the structure all as specified and as shown on drg :-
Legs for Table Dining (FD-239)
Legs for Table Dining (FD-273)
Long Rail
Short Rail
Material and labour for removing the following existing unserviceable wooden members to Table Bedside (FD-248/276) and supply and fix new first class hard wood (teak) members, including French polishing to the structure all as specified and as shown on drg :-
Sides made out of 18mm thick prelaminated particle board.
Back made out of 6mm thick commercial plywood.
Top / shelves made out of 12 mm thick prelaminated particle board.
Material and labour for removing the following existing unserviceable wooden members to Peg Table (FD-236) and supply and fix new first class hard wood (teak) members, including French polishing to the structure all as specified and as shown on drg :-
Top Rail (Long)
Top Rail (Short)
Material and labour for removing the following existing unserviceable wooden members to Peg Table (FD-277/384/TP) and supply and fix new first class hard wood (teak) members, including French polishing to the structure all as specified and as shown on drg :-
Top Rail
Bottom Rail
Material and labour for removing the following existing unserviceable wooden members to Table Centre (FD-235) and supply and fix new first class hard wood (teak) members, including French polishing to the structure all as specified and as shown on drg :-
Top Rail (Long)
Top Rail (Short)
Top Stiffener
Material and labour for removing the following existing unserviceable wooden members to Table Centre (FD-274/TP) and supply and fix new first class hard wood (teak) members, including French polishing to the structure all as specified and as shown on drg :-
Top Rail (Long)
Top Rail (Short)
Top Stiffener
Bottom Rail (Short)
Material and labour for removing the following existing unserviceable wooden members to Teapoy (FD-232) and supply and fix new first class hard wood (teak) members, including French polishing to the structure all as specified and as shown on drg :-
Top Rail (Long)
Top Rail (Short)
Material and labour for removing the following existing unserviceable wooden members to Teapoy (FD-382) and supply and fix new first class hard wood (teak) members, including French polishing to the structure all as specified and as shown on drg :-
Top Rail (Long)
Top Rail (Short)
Lower Rail (Short)
Material and labour for removing existing chipped out lamination/teak veneer(OST)/6mm commercial ply back Side Board (FD-26/241) supply and fix pasting new 1.5mm thick lamination/ 4.0mm thick teak veneer (one side)/6mm thick commercial ply back including French polishing to the structure of Side board all as specified and as shown on drg :-
Supply and fix 1.5mm thick lamination for top
Supply and fix 4.0mm thick teak veneer(one side) for sides and shutters.
Supply and fix 6mm thick commercial ply for back.
Material and labour for removing the following existing unserviceable wooden members to Table 900x600x760mm with/without drawer (FD-223, 224) and supply and fix new first class hard wood (teak) members, including French polishing to the structure all as specified and as shown on drg :-
Legs for Table
Long Rail (Top)
Short Rail (Top)
Short Stiffeners
Long Stiffeners
Drawers
Material and labour for removing the following existing unserviceable wooden members to Table 900x600x760mm with/without drawer (FD-283 & 284) and supply and fix new first class hard wood (teak) members, including French polishing to the structure all as specified and as shown on drg :-
Legs for Table
Long Rail (Top)
Short Rail (Top)
Short Stiffeners
Long Stiffeners
Drawers
Material and labour for removing the following existing unserviceable wooden members to Table Writing (FD-275) and supply and fix new first class hard wood (teak) members, including French polishing to the structure all as specified and as shown on drg :-
Legs for Table
Stiffener (Bottom)
Top Rail (Long)
Top Rail (Short)
Bottom Rail
Back with 6mm thick commercial plywood.
Drawers
Shutter of cupboard of suitable size made out of 18 mm thick pre-laminated particle board one side teak faced and providing CP Knobs and continous piano hinges for hanging with the table
Material and labour for removing the following existing unserviceable wooden members to Bed Plywood Top (FD-245 & 246) and supply and fix new first class hard wood (teak) members, including French polishing to the structure all as specified and as shown on drg :-
Long Rail
Head Board with Legs
Foot Board with Legs
Stiffener to support ply wood top
12mm thick plywood top (BWR grade).
Material and labour for removing the following existing unserviceable wooden members to Table Dressing Ladies (FD-251) and supply and fix new first class hard wood (teak) members, including french polishing to the structure all as specified and as shown on drg :-
Glass copper electro plated mirror of suitable size 5mm thick and new plywood commercial 6mm thick Ply for back side to mirror frame.
Plastic laminated sheet natural teak veneer finish 1mm thick in the top, 2 side and drawer facing and new first class teak wood beading 4mm thick fixing to the board.
Removing of unserviceable broken ply wood from drawer bottom and providing new ply wood commercial, 6mm thick to the drawer bottom.
CP knobs 40mm as approved by GE/Engineer-in-Charge.
New glass panes shutters 5 mm thick along with aluminium channel and glass runners.
Material and labour for removing the following existing unserviceable wooden members to Table Dressing Ladies (FD/MAP-II/07) and supply and fix new first class hard wood (teak) members, including French polishing to the structure all as specified and as shown on drg :-
Glass copper electro plated mirror of suitable size 5mm thick and new plywood commercial 6mm thick Ply for back side to mirror frame.
Drawer Front of the drawer shall be of 18 mm , sides & back of drawer shall be of 12 mm thick pre laminated mdf as specified. bottom of the drawer shall be 6 mm ply as specified. 2 nos telescopic channels shall be provided for smooth running of drawer.
CP knobs 40mm as approved by GE/Engineer-in-Charge.
Material and labour for removing of unserviceable old components from Table Dressing Gents (FD-230) and providing and fixing new components to Tables as directed by Engineer-in-Charge including French polishing to the structure of Table Dressing Gents all as specified and shown on drawing
Glass copper electro plated mirror of suitable size 5mm thick and new plywood commercial 6mm thick Ply for back side to mirror frame.
Plastic laminated sheet natural teak veneer finish 1mm thick in the top, 2 side and drawer facing and new first class teak wood beading 4mm thick fixing to the board.
Removing of unserviceable broken ply wood from drawer bottom and providing new ply wood commercial, 6mm thick to the drawer bottom.
CP knobs 40mm as approved by GE/Engineer-in-Charge.
Material and labour for removing of unserviceable old components from Table Dressing Gents (FD/E6/MAP/16) and providing and fixing new components to Tables as directed by Engineer-in-Charge including French polishing to the structure of Table Dressing Gents all as specified and shown on drawing
Glass copper electro plated mirror of suitable size 5mm thick and new plywood commercial 6mm thick Ply for back side to mirror frame.
Glass shelf of suitable size 5 mm thick supported on runner/glass holder
Material and labour for removing the following existing unserviceable wooden members to Chair Wooden Bottom w/o arms (FD-225) and supply and fix new first class hard wood (teak) members, including French polishing to the structure all as specified and as shown on drg :-
Side Rail of Seat Frame
Rear Rail of Seat Frame
Front Rail of Seat Frame
Front Leg
Rear Leg
Back rest
Bottom Side Stiffener
Bottom Centre Stiffener
Seat made out of 6mm thick commercial plywood.
Material and labour for removing of the existing broken glass from Table centre two tier with glass top (TP) and supply and fix new Glass of size 900x450x10mm thick clear glass suitable to the existing Table Centre (TP) as directed by Engineer-in-charge.
Material and labour for removing of the existing broken glass from Peg table with glass top of sorts (TP) and supply and fix new Glass of size450x350x10mm thick clear glass suitable to the existing Table Centre (TP) as directed by Engineer-in-charge.
Material and labour for removing unserviceable castor wheel from trolley for TV (FD/E6/ MAP/04) and supply and fix new swivel type castors wheel as per drawing as directed by Engineer-in-Charge
Material and labour for removing of existing unserviceable Plastic Bushes from Chair Dining, Chair Writing, Chair Easy, Stool Dressing and supply and fixing of New Plastic Shoe/Bushes at the location as directed by Engr-in-Charge.
Material and labour for removing of existing unserviceable Plastic Bushes from Table Dining 8/6 Person, Table Bedside, Table Peg, Table Centre, Teapoy, Table 900x600, Table Writing and supply and fixing of New Plastic Shoe/Bushes at the location as directed by Engr-in-Charge.
Material and labour for removing of old unserviceable plastic cane of chair dining (FD-228/279), Chair easy (FD-201 /229), Chair writing (FD-202/250/280), Stool dressing (FD-252/282/374) and recaning with approved quality cane plastic 2mm/3mm/4mm, after tightening the loose chairs/stool all as specified and as directed by Engineer-in-Charge.
Material and labour for removing the existing faded off/damaged top of the following Tables and supply and fix table top of 18mm thick prelaminated particle board (exterior grade) of approved quality and shade on one side and other side balancing white to the structure of table all as specified and directed by Engr-in-Charge. (a) Table 900x600mm with/without drawer (FD-223, 224, 231 &283), (b) Table 900x900mm (FD-291), (c) Teapoy (FD-278, 382), (d) Table Centre (FD-274), (e) Table Dining 6/8 pers (DB-3955/FD-239 & 273), (f) Table Writing (FD-151,275/ DB-3982, DB-3958) (g) Table Peg (FD-236, 277, 384) etc.
Supply and fix 4 mm teakwood beading all around the wooden table tops including French polishing (FD-223/224/231/ 283/291/278/382/274/239/273/151/275/236/277/384)
Material and labour for removing of old unserviceable/broken pegs from Hat stand with mirror (FD-233) and providing and fixing new Copper oxidised steel peg of size 125mm to hat stand at the location as directed by Engineer-in-Charge all as specified and shown on drawing and directed.
Material and labour for removing the following existing unserviceable wooden members to Table Bedside (FD/E6/MAP/15(R)) and supply and fix new first class hard wood (teak) members, including French polishing to the structure all as specified and as shown on drg :-
Sides made out of 18mm thick prelaminated particle board.
Back made out of 12mm thick commercial plywood.
75 mm long steel handle
Material and labour for removing the following existing unserviceable wooden members to Bin linen multi purpose without ironing board, FD/E6/MAP/09) and supply and fix new first class hard wood (teak) members, to the structure all as specified and as shown on drg :-
Sides made out of 18mm thick prelaminated particle board.
Back made out of 12mm thick commercial plywood.
75 mm long steel handle
Material and labour for removing the following existing unserviceable wooden members to Table Computer (FD/E6/MAP/03) and supply and fix new first class hard wood (teak) members, to the structure all as specified and as shown on drg :-
Supply and fix to new Top made out of 18 mm thick prelaminated particle board.
Supply and fix new drawers along with telescopic channel as per drg and directed.
Techno India Enterprises
Ms GHOSH AND SONS
ASHA TRADING COMPANY
REENA INDUSTRIES
Vivek Engineers
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .