Diversion/re-organization of 11KV main OH line near railway bridge of CHP to existing 3 pole structure along joriya nalah at SDOCM

Amount

Erection of steel tubular or rail pole strut in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling and secured with holding clamps, bolts, nuts, etc. as required.(pole supply by department)

Erection of ACSR conductor of 7/3.35 mm to 7/4.00 diameter and above including binding etc. as required.350m x 3 wire=1050mtr=1.05km x .394kg/km

Supply of 8 SWG GI wire 1000m x 0.131kg/m

Supplying and erection of 11 KV pin insulator complete with large steel head G.I.pin,nuts,washers etc.as required.

Supplying and erection of 11 KV disc insulator for 11 KV over head lines with galvanized insulator fittings, ball and socket type and complete with galvanized strain clamps, bolts, nuts, washers etc. as required.

Supplying and erection of galvanized stay set for11KVoverhead lines complete with 19/ 20 mm dia X 1.8 metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm thick, thimble, stay clamps,turn buckle(20mmX600mm),7/4.00mmdiaG.I.stay wire and 11 KV strain insulator etc in cement concrete 1:3:6 (1 cement:3coarsesand:6gradedstoneaggregate40mmnominal size ) foundation including excavation and refilling etc.as required.

Supplying of two lengths of channel iron 75mmX40mmX6mm (7.14kgpermetre)double pole cross arm for three wire11KVover head line conductors complete with through bolts and nuts for clamping to the poles,50mmX6mmM.S.flats welded on oneside to the channel iron and with bolts and nuts on the other side for tying the cross arms together, including drilling holes for insulator pins/ fittings, bolts, nuts and washers etc (as per drawing) and painting with primer and finish paint as required.

Erection of double pole 3 wire cross arm for 11KV/22KV/33 KV OH line

Supplying of 50 mm X 8 mm M.S. flat iron pole top bracket/ cross armforsingle11/22/33KV over headline conductor complete with fixing clamps, bolts, nuts and washers drilling holes for insulator pins, bolts and nuts etc and painting with primer and finish paint as required.

Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per meter) cross arm for two 11 KV overhead line conductors complete with 50mm X 50mm X6mm (angle iron bracket welded to the channel iron and complete with 50mm X 6mm M.S.flat iron clamps, bolts and nuts including drilling holes for insulator pins, bolts, nuts and washers etc (as per drawing) and painting with primer and finish paint as required.

Erection of pole top/straight two wire/Vshape two wire,angleiron/ channel iron, cross arm on steel tubular/ rail/ PCC pole for 11/22/ 33 KV as required.

Dismantling of over head lines comprising of copper/ aluminum overhead conductor, G.I. wire, cross arms, insulators etc. as required

Erection of cradle guard 4 span x 48 Nos

Transportation,loading and unloading of new and dismntling pole to working site and from working site

Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of1m above ground level and removal of rubbish upto a distance of50 m outside the periphery of the area cleared.

Dismantling of pole/ street light standard/ strut embedded in cement concrete foundation etc. as required.

Total impact of GST for the purpose of CTC

M/S KUMAR ENTERPRISES

M/S SHIV PARBATI ENTERPRISES