NAGAR PANCHAYAT GANJMURADABAD UNNAO MAI STREET LIGHT KA TWARIT VIDHYUTIKARAN KA KARYA

Amount

Supply & fixing of 7 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 130mm and base plate 12mm thik) having 3mm thikness with single arm bracket (1 Mtr length) on RCC foundation including the cost of foundation, foundation bolts, excavation & back filling and Required T&P completee in all respect.

Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 52 watt to 72 Watt. Confirming to IP66 Protection complete in all respect

Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc.

25 sq. mm 3-1/2 core

35 sq. mm 3-1/2 core

Making connections of each street light fitting by s/l 2.5 mm2 3 core flexible copper cable from pole busbar box to fitting as p.s.289p

Supply and fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer-Incharge.

35 sq. mm 3-1/2 core

Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads. complete in all respect

16 sq. mm 4 core

25 sq. mm 3-1/2 core

35 sq. mm 3-1/2 core

S/F of feeder pillar Pannel with over voltage and under voltage relay with auto resetting manufactured using 2.0/1.6 mm thick CRCA sheet steel with powder coated paint double door with canopy base channel with cable gland entry from bottom for cable using suitable busbar with provision of incoming & outgoing MCCB of L&T/Schneider/GE/ABB make .installation of feeder pillar of suitable cc fundation.( All MCCB to be rotary handle type) incoming 100A 4 Pole MCCB -1 no.& Outgoing 63A 4 Pole MCCB- 2 no.

Supply and laying of 25mm x 3mm G.I. strip from earth electrode directly in the ground as required complete in all respect.

Supply and burring of Safe Earthing Electrode T-19 (Hot Dip Galvanized), Length up to 2000mm, outer pipe 50mm, inner pipe 25, terminal Dia 12 mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30cm square C.I. frame with hinged cover & masonry husing (from electrode terminal to switch board,

S/F of 8 SWG GI wire in 20 mm PVC Corrugated conduit pipe duly bound with earth clips as directed by E-in-charge. Complete in all respect

Making Pole Earthing as PS 701

Supply & Sticking of radium tape yellow in colour and making board of MS sheet as represented to Nagar Panchayat Ganj Muradabad

S/l of 63 mm PN 10 HDPE (DWC) pipe including cutting of road and earth exvacation in foundation by ordinary soil & refilling complete in all respect

L/c for repairing & restoration of road by mixing grit & tarcoal & filling the proper patch, Interiocking tiles & RCC material with c/o material & labour

Add GST @12%

M/S B.B. ENTERPRISES

Jai Mata di Power and Construction Co.