PROVN OF HARDSTANDING NEAR BLDG NO P 940 AND WALL PANELLING BLDG NO P 28 INCLUDING CERTAIN SANCTIONED WORKS AT AF STN BAMRAULI

Amount

Taking down chowkhat with shutters (without taking off shutters from the frame) not exceeding 1.50 sqm each complete all as specified and directed.

Taking down chowkhat with shutters (without taking off shutters from the frame) exc 1.50 sqm each but not exceeding 4 sqm each complete all as specified and directed.

S & F PVC solid factory made door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.

S & F 30 mm thick factory made solid panel PVC door shutter (Style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement complete all as shown in SSR Part – II 2004 and as directed. Make : “SYNTEX/RAJSHREE Plastic wood Forex, Indore”.

S&F Brass cromium plated tubular towel rail, 20mm dia, D type, 60 cm long between flanges complete all as specified and directed.

Demilition concrete in ground floors and paving n.exc 15 cm thick (below & above ground level) all as specified and directed.

Dismantling of floor hearth or wall tiling including cement mortar, bedding (but not backing), removing serviceable tiles to store and rubbish of the premises complete all as specified and directed

M&L 25mm thick plain cement concrete type B0, 1:2:4 (using 12.5 mm graded stone aggregate) as levelling course complete all as specified and as directed.

M&L for non-skid ceramic coloured tiles (400x400)mm, 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc laid over 15 mm screed bed in cement mortar 1:6 and set and jointed in neat cement slurry and pointed in white or coloured cement complete all as specified and as directed.

M&L for Glazed ceramic coloured tiles in vertical surface 350x250x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match including backing coat of 10mm thick in CM (1:3) complete all as specified and as directed.

M&L for non-skid ceramic coloured tiles 7mm thick (square/rectangular) area of each tile exceeding 0.06sqm but not exceeding 0.11 sqm, in floors etc laid over 15 mm screed bed in cement mortar 1:6 and set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and as directed.

S&F in repair Vitrious China wash basin, white, flat back, size 450x300mm excluding taps, waste chain and plugs and porcelain stopper but including bracket complete all as specified and as directed.

S&F in repair 15mm bore Pillar taps, cast copper alloy, with capstan heads, cromium plated screwed down high pressure with or without lettered complete all as specified and as directed.

S&F in repair stop valves, cast copper alloy, screwed down, high pressure, fancy type chromium plated, screwed both ends for iron pipe or for unions complete all as specified and as directed..

Supplying and fixing low density PVC connection commercial quality 450 mm long including PTMT nuts at both sides of 215mm bore and fixed complete all as specified and directed.

S&F 40mm waste fittings, brass, cromium plated for glazed ware sinks, basin etc with long screwed shanks and flynuts flange end complete all as specified and as directed.

Taking down cement or cement lime plaster on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and as directed.

M&L for 15 thick rendering on surface other than fair faces on brick wall or stone wall in CM 1:4 finishing the surface fair and even including preparation of surface complete all as specified and directed.

M&L for 15 thick rendering on surface other than fair faces on brick wall or stone wall in CM 1:6 finishing the surface even and smooth without using extra cement complete all as specified and directed.

M&L for 5 mm thick celing plaster in CM 1:3 on new surfaces including finishing without using extra cement complete all as speciifed and directed.

M&L for preparation of new plasterred surface and two coat of cement base paint including primer on wall surfaces complete all as specified and directed.

M&L for preparing new plastered surfaces of walls applying a thin layer of (Birla White) cement putty by finishing the surface to even and smooth and applying two coats of oil emulsion distemper over a coat of primer all as specified and as directed.

M&L for preparation of new plastered surfaces and applying three coat of white wash on ceiling including primer complete all as specified and directed.

M&L for preparation of old surfaces of wall and applying one coat of cement base paint on wall surfaces including primer of complete all as specified and directed.

Material and labour two coat of synthetic enamel paint over wooden surfaces including necessary preparation of old painted surfaces over 10cm width and girth all as specified.

M&L for 2nd class hardwood plain ,solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chafered, put together with glue pinned at joints, etc complete all as specified and directed.

M&L for preparation of new untreated wooden surface of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified

S&F 30mm thick Flush door shutters, solid core with block board core with ply wood face panels commercial type on both sides etc complete all as specified and directed.

S&F steel window with side hung shutter including projecting type hinges with steel handle & peg stay with glazing bars dovetailed and welded etc complete all as specified and directed.

S&F in steel window with side hang shutters including box type hinges with steel handles and steel peg stay, complete without glazing bars dovertailed of welded complete all as specified and directed

S&F CP brass jet spary for Europen type water closet with 1.50m long flexible PVC pipe and connectiong nipples suitable for 15mm dia bore complete all as specified and directed. Make :- L & K, Parko, GEM, Elite.

S&F 250mm aluminium anodised sliding door bolt with hasp staple (Bolt type) and fixing clip of sheet, cast or extruded section and fixing bolts and sliding door bolts of extruded sections or cast aluminium ally and fixed complete all as specified and directed.

S & F 150 mm aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S & F butt hinges, medium weight, cold rolled mild steel complete for the 100 mm lingth complete all as specified and directed.

S&F 20 mm dia mild steel laminated with PVC (golden colour) sheet fancy type curtain rods complete all as specified and directed.

S&F mild steel golden colour bracket fixed to both ends of each curtain rods complete all as specified and directed.

S&F in repair vitreous china wash down water closer pedestal pattern white colour, pan and trap including connection to drain or out going pipe & to flush pipe , anti syphonage pipe etc including plastic water closet seat black closed pattern with flst bottom, and cover and mild steel chromium plated or aluminium ginging device complete all as specified. Make:- Commander / Parryware / Hindwere.

S&F in repairs low level flushing cistern 10 ltrs capacity PVC ISI marks with complete fitting all as specified and directed. Make:- Commander, Parryware, Hindware.

Supply only stainless steel soap dish any type fixed to plug with chromium plated brass screwes or fixed in wall complete all as specified and directed.

S&F glass self assembly consisting of 5.50 mm thick sheet glass self 12 cm wide with chromium plated bracket guard bars and railing 60 cm long complete all as specified and directed.

S&F Brass Chromium plated shower rose 125mm size with or without swivel joints, including fixing to steel pipe or union as in repairs complete all as specified and as directed.

Taking up or down steel tubing and connection of 15mm dia bore pipe including cleaning for refixing or removal from site complete as directed.

Taking up or down steel tubing and connection of 20mm dia bore pipe including cleaning for refixing or removal from site complete as directed.

S&F 15mm bore, GI tubing, medium grade, with all fittings and fixed complete to walls and ceilings or laid in floor complete all as specified and directed.

S&F 20mm bore, GI tubing, medium grade, with all fittings and fixed complete to walls and ceilings or laid in floor complete all as specified and directed.

S&F 15mm dia bib tap, fancy type, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

Demolition of existing mud/puska in roofs any thick ness including plastering and leaping including brick tiles on terracing tiles (brick tiles shall be dismantied alongwith mud phuska, full thickness removed of any description on horizental and vertical surfaces) and removed out side MD land including loading & unloading and staking at the destination complete all as specified and directed.

M&L PCC 1:2:4 type B-1 (12.5mm graded stone aggregate) mixed with water proofing compound as in roof padding on existing roof slab laid to slope including finished surface even & fair complete all as specified and directed. (Note :- Water proofing compouund shall be measured and paid separatly)

M&L for Cleaning the roof surface from dust /dirt and applying a coat of bituminiouss primer @ 0.30 liters per square meter uniformity and including applying hot blown bitumen of grade 85/25 conforming to IS 702 @ 1.20 kg/Sqm and including APP based polymeric water proofing membrane 90 to 100 micron thick central core of HM HPDE film weight not less than 3.00 kg/sqm and of standred strick supervision of manufatures representative including sealing of side laps/end laps by thermo fusing and including S&F brick tiles 40mm thick laid over and including 15mm thick screed bed in in cement mortar 1:4 mixed with polymer based liquied water proofing additive as per manufatures specification and jointed and pointed in cement sand mortar 1:3 mixed with 5% crude oil by weight of cement and flush pointed in cement sand mortar 1:3 as separate operation including crude oil complete all as specified and directed. Note: WPC shall be measured and paid separately.

Supply only liquid integral water proofing compound etc complete all as specified and directed. Make Dr Fixit, pidifin 2K, Pidilite

Taking down PVC(SWR) pipe 110mm dia bore as any position in floor& trenches complete all as specified and directed..

S&F 110mm dia bore PVC (SWR) pipe single socket in any lenth with rubber ring joints laid in floors and trenches complete all as specified and directed.

S&F PVC (SWR) bends any radius for 110mm dia bore pipe as spesified & directed.

Dismantling of water tanks of capacity exceeding 250ltr but not exc 500ltr complete all as specified and directed.

S & F rotational moulded poythne water storage tank 500 ltr capacity(cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed.

S&F 15 mm ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed iron pipe & fixed (min weight 142 gm) complete all as specified and directed.

S&F of 18 mm thick Celuka PVC sheet minimum 600 Kg/sm density grade 1 quality of both side plain white colour rigidiam glassy finish fixed with screwed, solvent cement/adhesive as per manufacturer instruction to make cabinate sides, top, bottom and shelves inside the cabinate including hinges, handle and locking arrangement complete complete all as specified and directed. Note :- (i) Quoted rates deem to be included fixing of cup board on wall with appropriate war plug/dash through fastener(hammer type) as per manufacturer instructions. (ii) Febrication and installation of cup board to be carried out by authorised vendor of manufacturer only.

S&F of 18 mm thick Celuka PVC sheet minimum 600 Kg/sm density grade 1 quality of one side plain white colour and other side prelaminated rigidiam glassy finish fixed with screwed, solvent cement/adhesive as per manufacturer instruction to make cabinate sides, top, bottom and shelves inside the cabinate including hinges, handle and locking arrangement complete as per specification and as directed. Note :- (i) Quoted rates deem to be included fixing of cup board on wall with appropriate war plug/dash through fastener(hammer type) as per manufacturer instructions. (ii) Febrication and installation of cup board to be carried out by authorised vendor of manufacturer only.

M & L for bricks masonry with sub class "B" bricks built in CM(1:6) straight or curved on plan main radious exe 6 m etc complete all as specified and directed.

M&L for 15 thick rendering on surface other than fair faces on brick wall or stone wall in CM 1:6 finishing the surface even and smooth without using extra cement complete all as specified and directed.

S&F stainless steel greating of size 125mm dia for drain pipe complete all as specified and directed.

Surface dressing n exc 15 cm deep in soft loose soil complete all as specified and directed.

Excavating over areas, n.exc.1.5m deep and in any type of soil and getting out complete all as specified.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.

Removing excavated material distence upto exc. 250 m but not exceeding. 500 m and depositing where directed complete all as specified and directed.

Removing excavated material distence upto exc 500 m but n.exc 1.50 Km and depositing where directed complete all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

M & L for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base / mass concrete complete all as specified and directed.

Moorum / Red Bajari filling in floor or pavings, laid in layers not exceeding. 15 cm thick, spread, levelled and rammed including watering complete all as specified and as directed.

M&L for 80 mm thick machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of M-40 with grey cement and pigment including glossy finish complete all specified and directed.

Sand filling under floors or foundations including watering and consiladition complete all as specified and directed.

Returning filling in, including of spreading, levelling watering and well rammed in layers n exc 25 cm complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in coping, benching, bed block, cills like including weathering and slightly rounded etc including form work. complete all specified and directed.

M&L for 40 mm thick plain cement concrete type B2, 1:2:4 (using 20 mm graded stone aggregate) as in flooring without using extra cement complete all as specified and as directed.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel, sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding or as protection cover to wall, fixed with self tapping screws complete all as specified and directed.

M & L broken stone hard core of gauge not exceeding. 63 mm deposited, spread and levelled in layers not exceeding. 15 cm thick, watered and rolled / rammed to a true surfaces complete all as specified and as directed.

Dismantling of asbestos cement (corrugated, semicorrugated , etc) sheet in roof covering all as specified and directed.

Supply & fixing aluminium (anodised) grill made out of 7mm wide flat, square, ractangular or similar section, fixed with channel of size 38mm x 12 mm x 13mm (Section 8778 complete all as per manufacturer's instructions complete all as specified and directed. (Make: Grill No. 20 of 'DECO GRILL' or equivalent).

Demolition of brickwork or stone masonry, built in cement mortar includinguding all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stonework and precast concrete articles all as specified and as directed.

S&F Aluminium window (Powder coated ) double leaf with anodized aluminium frame sliding/openable including wheel powder coated of section 62.5x37x2.5 mm thick shutter with bottom & middle rail of section 112.5x37x2.5mm and style & top rail of section 83x37x2.5mm thick with centrally locking arrangement with lock rail of rebate including joints cleat fixing of builders hardware fittings necessary and gazing with 5.5mm thick ordinary plain glass including wire mesh shutter necessary fittings fixuters & aluminium snap beads complete all as specified and directed.

M&L for complete removing of existing treatment on wall surface and applying two coat of oil bound distemper over and including a thin layer of wall care Putty on wall surfaces to obtain smooth finish etc complete all as specified and directed.

S&F Aluminium Door (Powder coated ) single/double leaf with anodized aluminium frame sliding/openable including wheel powder coated of section 62.5x37x2.5 mm thick shutter with bottom & middle rail of section 112.5x37x2.5mm and style & top rail of section 83x37x2.5mm thick with centrally locking arrangement with lock rail of "Godrej or Link 7 lever self closing device with rebate including joints cleat fixing of builders hardware fittings necessary numbers of floor spring and gazing with 5.5mm thick ordinary plain glass including wire mesh shutter necessary fittings fixuters & aluminium snap beads complete all as specified and directed.

S&F Floor door stopper 150mm of aluminium alloy body and tongue ,anodised,with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F Door closer, hydraulically regulated, designation No 3 universal type, suitable for door shutter of 851 to 1000mm in width and of wight between 61 to 80Kg and fixed, aluminium (die cast) body, all as specified and as directed.

M&L for 35mm thick precast cement concrete louvres and jallies, set in cement mortar (1:4) including all mouldding but excluding frame including dismantling old etc complete all as specified and directed

S&F Mild steel TMT bars 10mm dia and over , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, ressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc complete all as specified and as directed.

M&L for Reinforced cement concrete (nominal mix), (1:2:4), type B1 (using 20mm graded stone aggregate) as in wall all as specified and as directed. Note:- Reinforcement as required shall be measured and paid for separately.

M&L machine pressed precast concrete cloured interlocking paver block with grey cement and pigment any shape and size confirming to ISI 15658-2006 of 60mm thickness M-35 Grade .

Excavation in post holes (or similar holes) each n. exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around. In layers n. exc 25cm, for hard/ dense soil.

S&F steel work in tubular including special shaped washer etc. complete using ERW or induction butt welded yubes conforming to I.S 1161-1979 St grade St-240

S&F plate girder or single stanchions, built up of one beam or channel section with flange plates, caps, bases splices angle brackets cleats and other connections

PCC 1:2:4 type B-2 (Using 40mm graded stone aggregate) as fdn filling and mass concrete for post holes.

M & L two coats of synthetic enamelled paint over a coat of red oxide on steel surfaces over 10 cm width or girth over new/old steel surfaces etc, complete all as sfd and directed.

S&F Rolled mild steel section for wind ties for roof including securing bolts & similar work conforming to Fe 290 or E-165 complete all as specified and directed.

Supply & fixing of PVC wall panelling in double layer sheet for panel & inner framework including strips should have in their centre a grave of 6mm & 1mm depth for sinking the head of the screw used to fix the strips to the wall vertically at an equal interval between two PVC strip. The PVC strips shall be fixed to the wall using steel screws through the groove in the PVC strip by using PVC fasteners panels are joined through solvent content complete all as specified and directed as per manufacturer instructions. Make : DECO India Cat Part No. - 0039.

S&F 19 mm dia stainless steel dropery rods in any colour fancy type complete all as specified and directed. Make : Vista Cat Part No. SW-06.

S&F curtain brackets mild steel with matching with the curtain complete all as specified and directed. Make : Vista Cat Part No. SW-06.

S&F in repair venation blind vertical type level or ultima 100mm width of strip with necessary pulling threads aluminium channel along with all arrangement fixed to wall completed all as specifiedand directed.

S&F MS flat iron as in hold fast etc and similar work completed all as specifiedand directed.

M&L PCC 1:3:6 type C1 (20mm graded stone aggregate) as in anchoring hold fast, bed plate etc complete all as specified and directed.

S&F Aluminium anodised barrel tower bolts 200mm long of extruded section and fixed complete all as specified and directed.

S&F extruded Aluminium handles fabricated type anodised 150mm size complete all as specified and directed.

S&F PVC/sunmica colour wall papers self adhesive wood grain wallpaper for wooden door/wooden cup board matching with existing with wall paneling shed complete all as specified and directed.

Supply and laying XLPE insulated ,screened ,PVC bedded , galvanised steel strip or wire armoured , electric power cable (heavy duty ) with multi -stranded aluminium conductor ,1100 volts gade including taking up/down ezisting cable of following Sizes:- Note : Excavation ,erath work ,sand cushioning & protection work shall be measured & paid separately. (a) 25 Sqmm 4 core

Supply and laying sub class 'B' bricks (Old Size) laid flat in trenches as cable covers complete all as specified and directed.

Supply and spreading clean and dry sand (unwashed) in trenches around the cable for cushioning complete all as specified and directed

Supply and laying in repair 40 mm dia bore GI pipe “Light Grade” in trenches, under floors, roads, along poles for protection of cables, including sealing ends complete all as specified and directed.

S&F Factory made, sheet metal enclosure distribution boards, double door type, protection class ( IP-42),vertical type suitable for mounting MCBs confirming to IS-13032, IS-8623, BS-5484 with min 200 Amps rating copper bus bar ,TP and N 8 ways ,415 volts complete all as specified and directed. Make :Indo Asian/ABB/Legrand

S&F Factory made, sheet metal enclosure distribution boards, double door type, protection class ( IP-42),vertical type suitable for mounting MCCBS, MCBs confirming to IS-13032, IS-8623, BS-5484 with min 200 Amps rating copper bus bar ,TP and N 12 ways ,415 volts complete all as specified and directed. Make :Indo Asian/ABB/Legrand Note: MCB/MCCBs shall be measured and paid seperatly.

S&F Factory made, sheet metal enclosure distribution boards, double door type, protection class ( IP-65),vertical type suitable for mounting isolators, MCBs confirming to IS-13032, IS-8623, BS-5484 with min 200 Amps rating copper bus bar ,SP and N 12 ways ,240 volts complete all as specified and directed. Make :Indo Asian/ABB/Legrand Note: MCB shall be measured and paid seperatly.

S&F Factory made, sheet metal enclosure distribution boards, double door type, protection class ( IP-65),vertical type suitable for mounting isolators, MCBs confirming to IS-13032, IS-8623, BS-5484 with min 200 Amps rating copper bus bar ,SP and N 8 ways, 240 volts complete all as specified and directed. Make :Indo Asian/ABB/Legrand Note: MCB shall be measured and paid seperatly.

S&F MCCB ,four pole,415 Volt,125 Amp rating,25 KA ultimate braking capacity fixed in DBs complete all as specified and directed. Make Legrand/Schnider/ABB

S&F MCB, single pole and neutral, 230 volts, 32 to 63 Amps rating, "C" series fixed in DBs complete all as specified and directed. Make Legrand/Schnider/ABB

S&F MCB, SP, 6 to 32 Amp rating, 230 volt, 10 KA, 'C' series fixed in DBs complete all as specified and directed.

S&F MCB, SP, 230 volts, 32 to 63 Amp rating, 10 KA, C series fixed in DBs complete all as specified and directed.

Taking down carefully the existing aluminium/coper point wiring for light/fan/socket/bell or power point including. All fittings i.e. switch, sockets, ceiling rose, regulators, batten holders, etc. Complete and making good disturbed surfaces of wall/floor to match with the surroundings of wall/ceiling/floor etc including taking down old light fittings complete all as specified and directed. Note:- (i) Contractors quoted rate of this item deemed inclusive of unscrewing of the serviceable fittings and fixture as directed. (ii) Quoted rate also deem to be included cost of cutting chases for taking out concealed conduit if any and nitch for terminal box.

M & L for point wiring with PVC insulated, PVC unsheathed FRLS cable two single core, nominal area 1.5 sq mm with stranded copper conductor 1100 volts grade drawn through and including rigid PVC conduit (concealed) medium grade 19 mm internal dia with all PVC conduit fittings medium grade such as Tees, elbows, bend, reducers etc and 1.5 sq mm unsheathed copper conductor earth wire connected to earth dolly including CI/MS boxes 1.6 mm thick with two coats of anticorrosive paint outside and aluminum paint inside, sunk in wall and white plate covers of suitable modules of moduler fitting brand sheet cover (white) for mounting of switches, sockets and switch sockets, regulators as required complete all as specified and directed for the following:- Note :- (i) The rates of chase cutting on wall for concealing conduit and steel terminal boxes are included in the unit rates. (ii) Colour code of wire shall strictly be followed as directed.

(a) For one light point/fan/Exhaust fan point controlled by one switch

(b) For one three pin socket out let on independent board complete.

(c) For one three pin socket out let on same board complete.

(d) For Moduler socket 6 Amp outlet independent but below the switch board of lihgt point in the same verticle plan.

All as per item No 120 above but with 4 sq mm PVC insulated an PVC unsheathed cable for 3 pin 15 Amps power point on independent Board 4 Sq mm copper PVC unsheathed as earth wire all as directed.

S & F Modular switch 6 Amps 1 Module complete all as specified and directed.

S & F Modular switch 16 Amps 1 Module complete all as specified and directed.

S & F Modular socket outlet 6 Amps 2 Modules 2 in 1, 2/3 pin complete all as specified and directed.

S & F Modular socket outlet 16 Amps 2 Module, 2/3 pin combined complete all as specified and directed.

S & F ceiling rose surface bakalite 65X50 mm three terminals ,240 volts grade comlete all as specified and directed.

S & F calling bell AC ding dong 220 volt multi music on wooden board complete all as specified and directed.

S & F modular bell push button 6 Amps 1 Module complete all as specified and directed.

S & F modular type fan regulator electronic step type 240 volts complete all as specified and directed.

Supply and fixing in replacement of existing defective flourescent tube light fitting of 20/18/14 Watt with LED fitting of 10 watt 2 feet long integral sleek extruded aluminium housing LED channel with white acrylic cover wall mounted type including necessary connection complete all as specified and as directed. Make : Philips cat no BN021C LED10S -6500 PSU GR S1 /Havells, Cat No HEWEBP7IN1W010/Crompton cat no LCCLB08-CDL

Supply and fixing in replacement of existing defective flourescent tube light fitting of 36/40/28 Watt with LED fitting of 21 watt 4 feet long integral sleek extruded aluminium housing LED channel with white acrylic cover wall mounted type including necessary connection complete all as specified and as directed. Make : Philips cat no BN021C LED20S PSU CDL GR /Havells, Cat No HEWEBP7IN1W020/Crompton cat no LCCLB20-CDL

S & F LED luminaries 2x2 feet size 35 watt 240 volt 50 Hz with high transmitive diffuser suitable for indoor spaces aluminium housing including necessary connection complete all as specified and as directed. Make : Philips/Bjaj/CG

Supply and fixing in replacement of existing defective energy efficient tube light fitting of 3x36 watt with recess mounting 2'x2' LED fitting of 36 watt with white powder coated CRCA housing with high power LEDs with aluminium front frame with flat white high transmission acrylic cover complete all as specified and directed. Make : Philips Cat No RC375BLED28S/865 PSU W60L60WH/Havells, Cat No LHECDIL7PP1W036/ Crompton Cat No LCPL-36-CDL(2x2).

S & F bulkhead fitting environmental friendly, ultra modern ,energy saving ,surface mounted ,decorated oval bulk head edgelit LED lumanarie comprising of high brightness LED of 10 watt including necessary connection complete all as specified and as directed. Make: Havells Cat part No. -Rugby Neon 10WLED760SSYMBOPC OR EQUIVALANTof other make Bjaj /CG

M&L for sub main wiring with 2 run of single core PVC insulated and PVC Unsheathed, multistranded copper condutor of nominal area 6 sqmm FRLS, 1100 Volts grade cable drawn into and including rigid non metalic PVC Conduit medium grade of suitable size including all fittings medium grade and one run of PVC insulated and PVC unsheathed, multistranded copper conductor of nominal area 4 sqmm FRLS 1100 volts grade cable continuous earth wire of green colour code complete. Note:- (a) Two runs of 6 sqmm cable and one run of 4 Sqmm cable as earth lead with conduit shall be measured as one unit length for payment. (b) Quoted rate shall deem to be included cost of cutting chasses in wall for concealling conduit and making good to match with existing finish as required and directed.

M&L for sub main wiring with 2 run of single core PVC insulated and PVC Unsheathed, multistranded copper condutor of nominal area 10 sqmm FRLS, 1100 Volts grade cable drawn into and including rigid non metalic PVC Conduit medium grade of suitable size including all fittings medium grade and one run of PVC insulated and PVC unsheathed, multistranded copper conductor of nominal area 6 sqmm FRLS 1100 volts grade cable continuous earth wire of green colour code complete. Note:- (a) Two runs of 10 sqmm cable and one run of 6 Sqmm cable as earth lead with conduit shall be measured as one unit length for payment. (b) Quoted rate shall deem to be included cost of cutting chasses in wall for concealling conduit and making good to match with existing finish as required and directed.

S & F AC starter unit consisting of one 25 Amp capacity starter ,one 240 volt 25 Amp 10 KA SPN MCB ,ONE 25 Amps socket one 32 Ams plug top pre wired complete all as speciefied and directed.

M&L for Earthing complete with galvanised steel earth plate electrode 60 x 60 cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised iron wire 4mm dia as earth lead wire by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in Electrical plate No. 3, MES SSR Part I- 2009 with 15 mm dia medium grade GI pipe as a protection to earthing lead and 20 mm dia medium grade GI pipe for watering purpose including excavation & earth work in any type of soil, funnel, wire mesh, RCC pit with cover, cast iron frame complete and connected to earthing test point all as specified or indicated including testing on completion. Notes (i) The concrete pit shall be PCC (1:3:6) type C-1, 40mm thick precast cover slab of RCC with suitable Mild steel handle in lieu of cast iron cover shown in electrical plate No 3 of MES SSR Part-I (ii) PCC pit shall be provide at least 500 mm away from the earth pit and not on just on the eath pit and extra cost of additional length of water pipes and fittings junction etc shall be deemed to be included in the rate. (iii) Item includes the cost of 7.5 metre earth lead wire and GI pipe for protection of earth wire.

S&F Fresh air fan, AC, single phase 230 volts of size 250 mm sweep, plastic body with louvers and making of hole & grouting nut & bolts and connecting with 3 run of 1.5 sqm, single core, PVC insulated mulstistranded copper conductor FRLS cable from ceiling rose and making good the disturbed surface with existing colour matching complete all as specifed and directed.

S&F Wall mounted fan, 450 mm sweep, AC, single phase, 230/240 Volts, fixing on wall all as required and connecting with 3 run of 1.5 sqm single core PVC insulated mulstistranded copper conductor cable from ceiling rose complete all as specifed and directed.

Supply and fixing ceiling fan 1200mm sweep with all standard accessories and necessary materials, erected in provided hook/clamp. Material : ceiling fan : electric Ceiling fan capacity type with double ball bearing complete with capacitor, 300 mm down rod, canopies, shackeles, reel insulator, half threaded bolts of 9.53mm (3/8") dia 62.5 mm (2-1/2") to 88mm (3-1/2") long and 7.94 mm (5/16") dia 44.5 mm (1-3/4) to 57 mm (2-1/4") long with nuts, with lock type split pin spring & plate washers etc, three number blade made of Aluminium alloy suitable for single phase, AC 210 volts, 50 Hz supply and conforming to class I to IS : 374/1979 with amendment no 1 to 6 expect for performance parameters to the extent modified as details in general requirements, the down rod shall be capable to withstand a tensile load of 1000 kg without break down and a torsion load of 500 kgcm without breakage as per clause 10.14.1 of IS : 374/1979 with amendment no 1 to 6 Eletrical motor should be single phase permanent capacitor type with no. of pole 12/14/16/18(as per sweep). Class-1 wih basic insulation. class of insulation shall be B class. The binding wire used for fan should be copper wire, synthetic enameled of 30 to 38 SWG. Connection wire : Flat/round two core flexible stranded copper wire cord 23/0.2 mm ISI marked. Paint superior quality enamel paint of specified colour for marked Sr . No and date of erection of 1200mm sweep, maximum input power 50 watts air delivery 215 cubic meter per minute complete all as specifed and directed.

Supply and fixing in replacement of 5 Star rated Ceiling fan, copper wound winding of 1200mm sweep, 230 volts,50 Hz, single phase complete with down rod, canopy and fan blades of suitable size including making connection complete all as specified and directed. Make :Havells Model No ES NEO/Bajaj (or) Equivalent in Usha/CG

Supply and fixing in replacement of exhaust fan 300mm sweep, copper wound, heavy duty, four blade, double ball bearing, 1400 RPM, minimum air delivery discharge 6120 CMH suitable for SP, 230/250 volts, 50Hz, AC supply with louver sutter complete and connecting with and including 3 run 1.5 sqmm single core, PVC insulated unsheathed FRLS multistranded copper conductor complete all as specified and directed. Note :- Making holes in wall for fixing of exhaust fan is inlcuded in quoted unit rate.

Note :- Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items. The same shall be recovered from various payment to contractor before handing over old material.

M/s DKS Engineering Works

M/s M A Traders

M.R. ENTERPRISES

Mohit Enterprises

M/S R S Traders

DEORA ELECTRIC WORKS