REPAIR TO FENCING STORM WATER DRAIN PATH AND OTHER MISC WORKS AT AF STATION DEOLALI

Amount

Dismantling posts or struts(wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed.

Dismantling of fencing wire mesh any chain link fencing type all as directed.

Dismantling wrought iron or mild steel work in any description all as directed. (old flat iron, round bar).

Excavation in post holes (or similar holes) each not exc 0.5 cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers n.exc 25 cm watering and removing surplus soil to a distance n.exc 50m and making good disturbed surface complete all as specified and as directed.

M&L PCC 1:3:6 typeC-2 (using 40 mm graded stone aggregate) as in foundation for post/struts.

S&F MS Screw bolts (machine made) with hexagonal or square heads at one end and scewed the other each screwed end to be fixed with one washer and one hexagonal nut, the other end to be embedded in RCC fencing post while casting for fixing chain link fencing, dia of bolt 12 mm and length of bolt exc 5cm but nexc 10cm long.

Fixing only chain link fencing including line wires any mesh ,size and type to any type of standrad rails, straining bolt etc including provison of binding wire.

Supply only chain link fencing made out of 3.8mm to 4mm dia, galvanised MS wire,size of mesh 100mm x 100mm.

Supply only chain link fencing made out of 3.8mm to 4mm dia, galvanised MS wire,size of mesh 50mm x 50mm.

S & F mild steel angle in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or revetting etc and similar work conforming to Fe-290 Gde E-165.

S&F round tie bars 10mm dia conforming to Fe 290 Gde E-165 let in and fixed independantly incl hooking ends for securing wire mesh chain link fencing as in bearing bars.

M&L preperation of new steel surfaces of any desciption over 10 cm in width or girth not other wise descibed and applying two coats of synthetic enamell paint over a coat of red oxide.

M & L preparation of new steel Surface of any description, n exc 10cm in width or girth when unconnected with other painting or when painted in a different tintand applying two coats of synthetic enamell paint over a coat of red oxide.

S & F in repairs Galvanised. 2 strand, steel steel barbed wire 2.24mm dia barbed wire 2.24mm dia barbed with 2mm dia barbs at and fixing to any type of standard rails straining bolts, including, securing or bolts, including, securing or bolts, including, securing or bolts, including, securing or tying at crossings with and provision of galvanised mild pins, etc. as directed (each pins, etc. as directed (each line wire to be measured).

Demolition of cement concrete in ground floors and pavings nexc 15 cm thk (below or above GL).

Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc all as directed and specified.

Taking down cement plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc all as directed.

M & L brickwork with sub class 'B' bricks, straight or curved on planExc 6 mtr mean radius in walls built in cement mortar 1:6 all as specified & diretced.

M & L rendering 15 mm thick on fairfaces of bk or stone masonary surfaces in CM 1:6 finished even and fair without using extra cement.

M & L preparing new plastered surfaces & applying two coats of white wash.all as specified.

M&L for Providing, 50mm thick PCC 1:2:4 type B-2 (using 40 mm graded stone aggregate) all as specified.

M&L 75 mm thick PCC 1:3:6 mix type C2 (using 40 mm graded stone aggregate) as in plinth protection all as specified..

M &L for Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound Grade 'A' all as specified..

M&L for 100 mm thick sub base in PCC 1:4:8 type D-2 (using 40 mm graded stone aggregates) all as specified.

M & L for cement concrete 1:2:4 Type B-1(20mm graded aaggregate) in surface channels and drain.all as specified.

M & L for cement concrete 1:2:4 Type B-0(12.5mm graded aaggregate) in coping etc all as specified.

M & L for Boulder pitching is grouted with cement and sand mortar 1:6 all as specified.

Vinod Enterprises

SHREE SAMARTH SERVICES

Anand Trading Co

M/S KANNANS