WBPHED/EE/CMD/eNIT11/S04

Amount

Supply and installation of the following items for installation of Actuator operated butterfly valve at delivery Line of OHR-

Electrically gear operated, double flanged cast Iron butterfly valves conforming to IS: 13095, having body, disc and end cover in graded cast Iron to IS:210 Gr FG 260, Nitrile rubber face ring secured on disc by a SS AISI 304 retaining ring with stainless steel screws, the rubber ring seating on a corresponding SS AISI 304 seat in body, stub shaft of SS AISI 410 riding in teflon bearings. Flanges drilled to IS 1538 Table 4 & 6. Valves suitable for a working pressure of 10 kg/cm² (seat test) & body tested to 15 kg/cm². Valves are complete with Rotork/ Syncropak/AUMA/ Epak Electrical Actuator with starter. (Make- IVI/ Approved make)

MS Short piece, double flanged (DN 150 to 250) suitable size to match Dismantling joint & the newly supplied BFV all complete set as rewired

Head stock complete within the extension Rod & coupling as per direction of EIC

Pressure Gauge 0-10 kg/cm2 , 6" dia complete with necessary piping

12 core 1.5 sq. mm copper cable for actuator motor. (Make: Gloster/Havells/Polycab/approved)

Supply, delivery at site and storage wall mounted PLC operated Panel (for operating 3 nos Actuator) made of sheet steel fabricated 2 mm for load bearing &1.6 mm for non load bearing, indoor type, dust & vermin proof, lP-54 degree of protection, powder coated painted with rubber gaskets cover, front lockable hinged door with all Switchgear and other items duly wired up and tested as per specification. Consisting 16 Amp TP MCB-3 Nos, 6 Amp DP MCB-3 Nos, Push Button Switch with NO, NC Contact- 9 nos, Indicating light- 12 nos, Auto/ manual Switch, SMPS, PLC, UPS 600VA, Loogic contactor etc. (Panel make, all spare & components as per vendor list of PHED).

Hardwares as required including earth strip & gaskets

Installation of the all supplied items,fitting & fixing after welding of all head stock by fastners,cable laying, termination, panel fixing and earthing all complete.

supply & making necessary GI medium pipe (dia of pipe not less than 32mm) protection for actuator cable from control panel to actuator including supply of all specials and complete the job.

Labour Charges for boring throught any kind of soil by auger boring horizontally with water zet system including hire and labour charges with supply of suitable dia cashing pipe upto a depth of 1mtr.below G.L.and laying including necessary joints,tools& plants,staging tank ,pump set and making necessaryarrangment for boring and cost of withdrawing the same and laying in bore hole G.I/C.I pipes etc. all complete as per direction of EIC.

i) 80mm dia and upto 100mm dia.

Commissioning of the entire installation after testing the same in all variable and normal mode as per direction and to the entire satisfaction of EIC.

Add. GST@18%

Add. Cess@1%

Jal Pravahika Pvt. Ltd. (BID ID -5601563)

ELECTRICAL AND MECHANICAL ENGINEERING CORPORATION (BID ID -5606705)