REPAIR TO SUNKEN TREATMENT IN CERTAIN BUILDINGS INCLUDING REPAIR OF SERVICES WATER TANK IN OTM AND MD ACCN IN THE AOR OF AGE B/R-I UNDER GE(A) SURATGARH AT SURATGARH MIL STN

S&F Glazed ceramic coloured tiles with highlighter in vertical surface 300x600x7-8mm thick set and jointed with single component adhesive and pointed in white or colour cement grout to match including 10 mm thick rendering in CM 1:4 on other than fair face of brick work including dismantling floor tiling including cement mortar bedding and rubbish off the premises all as specified as directed by Engr-in- Charge.

M&L for 8-9 mm thick vitrified tiles 595x 1195 mm on vertical surface, coloured tiles (square / rectangular), polished, set in tile adhesive confirming to IS-15477-2019 type 2 and thickness as per manufacturer instruction of approved make including jointed in neat cement slurry and pointed with 3 mm epoxy resin grout to match the shade of tiles over & including rendering 10 mm thick in CM(1:4) all as specified and complete.

S&F anti skid, ceramic tiles, matt finish, 7 to 8 mm thick (square/rectangular) (coloured tiles) of size 300 mm x300 mm , as in floors set and jointed with cement mortar and pointed in coloured cement grout to match the coloured tiles 15mm thick screed bed or bedding layer CM 1:4 for laying finishes,complete after dismantling floor tiling including cement mortar bedding and rubbish off the premises all as specified as directed by Engr-in- Charge

M&L for fly ash brickwork, old size bricks, straight or curved on plan exc 6m mean radius wall built in cement mortar 1:6 complete all as specified and as directed

All as per item No 4 above but except bricks complete all as specified and as directed

Taking down existing frames exc 1.5 sqm but n.exc 4 sqm and Fixing pressed steel frames of size 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., and PCC 1:3:6 type C0 using (12.5mm graded aggregate) as in back filling of pressed steel frames, bed blocks, coping, fixing of hold fasts etc including necessary formwork including applying one coat of synthetic enamel paint (ordinary tint) on steel surfaces over 10cm width or girth complete all as specified and directed by Engineer - in - Charge.

S&F new 30 mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both side incl both side 0.9 mm thick one side Decorative laminate and other side plain laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions® complete complete all as specified and directed by Engineer-in-charge including supply and fixing of following items :- (a) Stainless steel (304 Grade) finished butt Hinges 100 mm, 4 Nos per leaf (b) Stainless steel (304 Grade) finished square tower bold 200 mm long-2 Nos per leaf as per table 01 dia of bolt 12 mm (c) Stainless steel (304 Grade) Finished Handles 200 mm-2 Nos per leaf. (d) Stainless steel (304 Grade) finished sliding bold 300 mm-1 No per leaf, 16 mm dia (e) Stainless steel (304 Grade) Finished Floor door stopper-1 140mm Nos per leaf. Note : Rate for all above work is included in this item, Nothing extra shall be paid on this account.

S&F anodised poweder coated Aluminium frame for doors, window, ventilators with one or more rebates including joining cleat for fixing etc complete with powder coating on Aluminium minium thickness of powder coating 50 micron as per the specification the top and bottom horizontal members and vertical members adjacent walls shall be fixed with floor, ceiling walls and cills where required and fixing with the help of rawal plug and screw or with fixing clip or with expansion hold plate fasteners . Aluminium section shall be smooth, rust free, straight mitred and jointed mechanically where ever required all complete as per the direction of Engineer-in-charge

S&F anodised powder coated Aluminium window (glazed and gauzed both),side hung type without sash bars, aluminum section weighing 0.55 Kg/m including necessary joining cleats, glazing, clips, rubber packing, anodised aluminium snap beading screws,aluminium fitting such as peg stays 150mm long (01 nos), hinges type B-21 100mm long (02 Nos) suitable handle (01 No) with powder coating of any colour (thickness of powder coating not less than 50micron) etc including Galvanised mild steel wire cloth 0.56 mm nominal dia of wire as specified or sheet 4mm glass complete all as specified and directed Note: Rates for wire mesh or glass deemed included in above rate.

S&F Anodised powder coated aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, mild steel Mortice lock vertical 4 levers size 100mm and aluminium (Die cast) body door closer hydraulically regulated, designation No. 3 universal type, suitable for door shutters of 851 to 1000mm in width, anodised aluminum snap beading screws etc. including Galvanised mild steel wire cloth 0.56 mm nominal dia of wire or sheet 4mm glass complete all as specified Note: Rates for wire mesh or glass deemed included in above rate.