Standardization and upgradation work at LC Gates (i.e. Improvement of Level Crossing Gate Lodge, toilet block, water supply, surfacing of road and provision of standard height gauge fencing etc.) LC No. 312, 324, 326, 327, 328, 329, 331, 332,336,338, 339, 340,341, 342, 343, 344, 346, 347, 349, 350, 351, 353, 355 on BRGT - KTE and LC No. 94, 98 and 100 on BIN - KTE section under jurisdiction of Sr. DEN (Central).

1-Part A - Standardisation and Upgradation

2-Part B - Standardisation and upgradation work at LC No. 343,344,

3-Part B (ii)- Standard Height Gauge

4-Part B (iii) - Water supply -

5-Part B (iv) - Improvement to LC under ADEN KTE

6-Part B (v)- Improvement to LC under ADEN KTE section

7-Part B (vi)-NS items 2- Improvement to LC under ADEN KTE section

Item Breakup - 1-Part A - Standardisation and Upgradation

Item Breakup - 3-Part B (ii)- Standard Height Gauge

Item Breakup - 4-Part B (iii) - Water supply -

Item Breakup - 5-Part B (iv) - Improvement to LC under ADEN KTE

Opening of level crossing up to required width Sqm from centre line of track for replacement of sleepers by digging of pucca road surface up to bottom of sleeper, removing of ballast, muck etc., screening of ballast & stacking the same near level crossing and disposing of all debris, replacing the required sleeper duly packing the sleeper to make fit for normal traffic and closing of LC surface with screened ballast to original level by proper ramming and consolidation to smooth motarable surface as directed by engineer in-charge.

Dismantling existing check rail of Level RM Crossing, blocks, bolts & nuts and stacking these in a countable manner near LC, free from any infringements as directed by Engineer in-charge. Overhauling of level crossing by digging out up to 50mm below sleeper, screening of shoulder & crib ballast, replacing unserviceable sleepers & fastenings as necessary, removal of check rails for examination of running rails and check rails, scrapping of rails and painting running rails and check rails and all fixtures with two coats of coal tar emulsion, greasing of ERCs, MCI inserts and liners oiling all the bolts, correcting cross level, gauge, alignment, surfacing and packing etc., re-fixing check rails duly ensuring standard clearances, re-inserting screened ballast, making good deficient ballast with Railway's ballast from stacks / heaps/borrowing from adjacent length of adjoining track within 50m lead, ramming & levelling road surface and refixing concrete slabs/making motarable road surface as required excluding re surfacing with bitumen as directed by Engineer in-charge.

Level crossings with asphalted road surface JABALPUR DIVISION-ENGG/WEST CENTRAL RLY Manufacture, supply, assembly, erection, commissioning and testing of Lifting Barrier assembly, having fragmented boom, boom light boxes with suitable gate lamps, bell, boom supports (stay wires) with adjusters, counter weight, pedestal and lock posts with foundation of 'A' type as required, turn-union wheel with brackets, balance and auxiliary weights clamps etc. to approved standard drawing with all fittings and fastenings excluding fringes, complete with contractor's men, equipments and materials, as per specifications and as directed.

Above 6m and up to 8m long Lifting Barrier

Provision of one Asphalt Speed Breaker RM Rumble Strip on each side of the approaches of manned level crossings as per approved drawing including painting two coats with paint of approved quality and colour.

Manufacture & supply of tested GI wire rope of Kg 6mm dia. and 6 ply to suit lifting barrier gates at nearby P.Way Stores / Depot / Level Crossing gate, as directed.

Manufacturing, supplying and fixing Wicked MT Gate of size 1025mm x 1025mm x 1000mm at manned level crossings, as per approved drawing including painting with 2 coats of specified enamel colour paint over 1 coat of primer including earthwork in excavation etc. complete, as per specifications and as directed. Total 2174567.72